Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Solution growth of Triglycine Sulfate (TGS) crystals on the International Microgravity Laboratory (IML-1)

An experiment was planned for the International Microgravity Laboratory (IML-1) to be launched around Feb. 1991. Crystals of triglycine sulfate (TGS) will be grown by low temperature solution crystal growth technique using a multiuser facility called Fluid Experiment System (FES). A special cooled sting technique of solution crystal growth will be used where heat is extracted from the seed crystal through a semi-insulating sting, thereby creating the desired supersaturation near the growing crystal. Also, a holocamera will be used to provide tomography of the three dimensional flow field and particle image displacement velocimetry to monitor the convective flows.

Lal, Ravi B.↗

Tethered variable gravity laboratory study: Low gravity process identification report

Experiments are described performable in the variable gravity environment, and the related compatible/beneficial residual accelerations, both for pure and applied research in the fields of Fluid Mechanics (static and dynamic), Materials Sciences (Crystal Growth, Metal and Alloy Solidification, Glasses, etc.), and Life Sciences, so as to assess the relevance of a variable G-level laboratory.

Briccarello, M.↗

Tethered gravity laboratories study

Variable Gravity Laboratory studies are discussed. The following subject areas are covered: (1) conceptual design and engineering analysis; (2) control strategies (fast crawling maneuvers, main perturbations and their effect upon the acceleration level); and (3) technology requirements.

Lucchetti, F.↗

Tethered gravity laboratories study

The following subject areas are covered: (1) thermal control issues; (2) attitude control sybsystem; (3) configuration constraints; (4) payload; (5) acceleration requirements on Variable Gravity Laboratory (VGL); and (6) VGL configuration highlights.

Lucchetti, F.↗

The NASA Microelectronics Space Radiation Effects Program (MSREP) at the Jet Propulsion Laboratory

The primary objective of the Microelectronics Space Radiation Effects Program (MSREP) at the Jet Propulsion Laboratory (JPL) is to assist NASA in the selection of radiation hardened microelectronic parts for insertion in NASA space systems through radiation testing and research. Prior to presenting examples of the research and testing on Single Event Effects (SEE) and Total Ionizing Dose (TID) effects, the space radiation environment and radiation requirements for the CRAFT/Cassini program, a typical JPL space project, are discussed.

Barnes, C.↗

Correlation between some current parameters and optical radiation generated by 280 mm long laboratory sparks

Discussed here is the optical radiation generated by 280 mm long laboratory discharges and its relationship to the current flowing in the discharge channel. In an experiment, the optical radiation generated by the discharges was measured at wavelengths 777nm (bandwidth 10 nm) due to O I(1), and 500 nm (bandwidth 5 nm) due to N II(19), and the broadband optical radiation between the wavelengths 400 to 1100 nm. The shape of the current waveform, which had a rise time of 0.1 microsecond and a decay time of 5 microsecond, remained the same with increasing peak value. The experiment was conducted with peak current amplitudes in the range of 1-4 kA. In order to test the effect of current rise time on the optical radiation, researchers also conducted studies with a current waveform having a 5 microsecond rise time. It was observed that the peak amplitude of the optical radiation pulse at the wavelengths mentioned above is proportional to the peak amplitude of the current flowing through the discharge channel. The rise time of the optical radiation pulse at a given wavelength does not depend significantly on the peak amplitude of the current waveform. The rise time of the optical radiation pulse decreases with decreasing wavelength. A slight increase in the decay time of the optical pulse, at a given wavelength, is observed with increasing peak amplitude of the current waveform.The results show that the rise time of the optical radiation pulse increases with the increasing rise time of the current waveform. The relationship between peak current, peak optical power, and peak electrical power is studied. Also, the relationship between peak current, optical energy (400-1100 and 777 nm), and electrical energy is discussed.

Windmar, Dan↗

Laboratory and theoretical models of planetary-scale instabilities and waves

Meteorologists and planetary astronomers interested in large-scale planetary and solar circulations recognize the importance of rotation and stratification in determining the character of these flows. The two outstanding problems of interest are: (1) the origins and nature of chaos in baroclinically unstable flows; and (2) the physical mechanisms responsible for high speed zonal winds and banding on the giant planets. The methods used to study these problems, and the insights gained, are useful in more general atmospheric and climate dynamic settings. Because the planetary curvature or beta-effect is crucial in the large scale nonlinear dynamics, the motions of rotating convecting liquids in spherical shells were studied using electrohydrodynamic polarization forces to generate radial gravity and centrally directed buoyancy forces in the laboratory. The Geophysical Fluid Flow Cell (GFFC) experiments performed on Spacelab 3 in 1985 were analyzed. The interpretation and extension of these results have led to the construction of efficient numerical models of rotating convection with an aim to understand the possible generation of zonal banding on Jupiter and the fate of banana cells in rapidly rotating convection as the heating is made strongly supercritical. Efforts to pose baroclinic wave experiments for future space missions using a modified version of the 1985 instrument have led us to develop theoretical and numerical models of baroclinic instability. Some surprising properties of both these models were discovered.

Hart, John E.↗

Explicit relations in Bowen fluorescence - Applications to nebulae, the sun, Scorpius X-1, and laboratory plasmas

A general analysis of the fluorescent process is described which emphasizes the differing roles of escape probabilities in one-component and two-component gases, and the existence of discrete fluorescent saturation regimes. Explicit formulas are obtained and discussed for astrophysical Bowen fluorescence, as a concrete example, with applications to planetary nebulae, the solar atmosphere and the X-ray binary Sco X-1. An expression is also provided and evaluated for the profile overlap integral involved in the pumping process. A preliminary conclusion is deduced that densities in the fluorescent line-emitting regions of nebular sources may be higher than those derived from forbidden line ratios. The analysis is extended to a proposed laboratory investigation which would exploit the possibility of controlling the determining factors in the fluorescent process, i.e., O III/He II abundance ratio, optical depth, and photoexciting radiation field.

Kastner, S. O.↗

Life sciences research using a lunar laboratory

The necessity for life sciences research on the lunar surface in order to determine the consequences of returning from extended missions in various low gravity environments and of transiting through high multiple gravity forces during decelerations is discussed. The functions of a lunar gravitational biology laboratory are outlined. Lunar science objectives include investigations in developmental biology including the evaluation of the capacity of diverse organisms to undergo normal development and the evaluation of the use of the lunar environment to study specific developmental phenomena in ways that cannot be accomplished by earth-based research. The need for musculoskeletal studies to examine the dynamics of osteoclast and osteoblast formation and breakdown and to address bone and demineralization problems is discussed. Biological adaptation to hypogravic environments and the effects of radiation and electromagnetic environmental factors are also considered.

Cipriano, Leonard F.↗

Laboratory measurements of NO2 line parameters near 1600/cm for the interpretation of stratospheric spectra

Tunable diode laser laboratory measurements of infrared spectral parameters of selected NO2 lines near 1600/cm have been made to assess the contribution of uncertainties in these parameters to stratospheric measurements of NO2 made using the Balloon-Borne Laser In-Situ Sensor (BLISS) tunable diode laser spectrometer. Relative line intensities are measured to accuracies of better than 2 percent, with a root-sum-squared uncertainty in the absolute linestrengths of 4.5 percent. Air-broadening coefficients have been determined from measurements at total pressures in the range 20-100 Torr, at temperatures of 293 K and 214 K. These results are also discussed in the light of the discrepancies between infrared instruments flown in the 1982 and 1983 Balloon Intercomparison Campaigns.

May, R. D.↗

Getting started on metrics - Jet Propulsion Laboratory productivity and quality

A review is presented to describe the effort and difficulties of reconstructing fifteen years of JPL software history. In 1987 the collection and analysis of project data were started with the objective of creating laboratory-wide measures of quality and productivity for software development. As a result of this two-year Software Product Assurance metrics study, a rough measurement foundation for software productivity and software quality, and an order-of-magnitude quantitative baseline for software systems and subsystems are now available.

Bush, M. W.↗

Neutron stars - A cosmic hadron physics laboratory

A progress report is given on neutron stars as a cosmic hadron physics laboratory. Particular attention is paid to the crustal neutron superfluid, and to the information concerning its properties which may be deduced from observations of pulsar glitches and postglitch behavior. Current observational evidence concerning the softness or stiffness of the high density neutron matter equation of state is reviewed briefly, and the (revolutionary) implications of a confirmation of the existence of a 0.5 ms pulsar at the core of (Supernova) SN1987A are discussed.

Pines, David↗

LQG and direct rate feedback control with model reduction on a flexible laboratory grid structure

This paper presents experimental and theoretical comparisons of three control laws applied to a complex laboratory structure. A reduced finite element model was generated for designing the control systems and then corrected based on measured mode shapes and frequencies. A standard time-invariant linear quadratic regulator with state estimation was investigated first. Two simple direct rate feedback control laws both guaranteeing stability were also designed using the reduced model. One minimizes the maximum control force and the other minimizes the same quadratic performance index as the linear quadratic regulator. The three control laws have comparable performance indices with the direct rate feedback designs having better spillover properties. Experimental results for all designs were obtained with digital implementation. It was shown that the performance of the control system designed on the basis of the corrected finite element model agreed better with experimental results than the performance of the control system designed on the basis of the uncorrected model.

Schamel, G. C., II↗

Accuracy of the spectral and radiometric laboratory calibration of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

The laboratory procedures, algorithms, measurements, and uncertainties associated with generation of the spectral and radiometric calibration of data acquired by AVIRIS are described. AVIRIS is an airborne sensor that obtains high-spatial-resolution image data of the earth in 224 spectral channels in four spectrometers covering the range from 400 to 2450 nm. The spectral calibration of AVIRIS agrees with the in-flight data to within two nanometers, and the absolute radiometric calibration is consistent with the in-flight verification to 10 percent over the spectral range. In-flight radiometric stability as measured by five consecutive passes over the surface calibration site is reported to be between three and five percent.

Chrien, Thomas G.↗

Laboratory studies of the newly discovered infrared band at 4705.2/cm (2.1253 microns) in the spectrum of Io - The tentative identification of CO2

The present evaluation of results from over 120 laboratory experiments relevant to the Trafton et al. (1991) discovery of a 2.1253-micron line in the spectrum of Io demonstrates that this band is produced by neither overtones nor combinations of the fundamental bands of molecules already noted on Io. Since the band's frequency is close to the first overtone of the nu(3) asymmetric stretching mode of CO2, attention is given this molecule's behavior under Io conditions. While pure solid CO2, and CO2 intimately mixed in a matrix of solid SO2 and H2S, generate bands of similar widths, these fall at frequencies lower than the Io band. Attention is given to the possible identification of the Io band with CO2 multimers of 'clusters' on Io.

Sandford, Scott A.↗

An automated calibration laboratory - Requirements and design approach

NASA's Dryden Flight Research Facility (Ames-Dryden), operates a diverse fleet of research aircraft which are heavily instrumented to provide both real time data for in-flight monitoring and recorded data for postflight analysis. Ames-Dryden's existing automated calibration (AUTOCAL) laboratory is a computerized facility which tests aircraft sensors to certify accuracy for anticipated harsh flight environments. Recently, a major AUTOCAL lab upgrade was initiated; the goal of this modernization is to enhance productivity and improve configuration management for both software and test data. The new system will have multiple testing stations employing distributed processing linked by a local area network to a centralized database. The baseline requirements for the new AUTOCAL lab and the design approach being taken for its mechanization are described.

O'Neil-Rood, Nora↗

Active vibration control with model correction on a flexible laboratory grid structure

This paper presents experimental and computational comparisons of three active damping control laws applied to a complex laboratory structure. Two reduced structural models were used with one model being corrected on the basis of measured mode shapes and frequencies. Three control laws were investigated, a time-invariant linear quadratic regulator with state estimation and two direct rate feedback control laws. Experimental results for all designs were obtained with digital implementation. It was found that model correction improved the agreement between analytical and experimental results. The best agreement was obtained with the simplest direct rate feedback control.

Schamel, George C., II↗

Modeling of Jupiter's millimeter wave emission utilizing laboratory measurements of ammonia (NH3) opacity

The techniques used to make laboratory measurements of the millimeter wave opacity from gaseous ammonia under simulated Jovian conditions are described. The results are applied to a radiative transfer model, which is used to compute Jupiter's millimeter wavelength emission. The absorptivity of gaseous NH3 is measured to reduce one of the largest uncertainties in modeling Jupiter's millimeter wave emission. Several other millimeter wave opacity sources are examined. New expressions are given for computing the absorptivity of NH3, H2O, cloud condensates, and pressure-induced absorption. Jupiter's reliable millimeter wavelength observations are compared with synthetic emission spectra which utilize these new absorption expressions.

Joiner, Joanna↗