Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High dimensional data,”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Materials Data on V6H36C12O19 by Materials Project

V6C12H36O19 is High Pressure (4-7GPa) Tellurium structured and crystallizes in the orthorhombic Pna2_1 space group. The structure is zero-dimensional and consists of four V6C12H36O19 clusters. there are six inequivalent V+4.33+ sites. In the first V+4.33+ site, V+4.33+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of V–O bond distances ranging from 1.64–2.35 Å. In the second V+4.33+ site, V+4.33+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of V–O bond distances ranging from 1.64–2.34 Å. In the third V+4.33+ site, V+4.33+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of V–O bond distances ranging from 1.64–2.34 Å. In the fourth V+4.33+ site, V+4.33+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of V–O bond distances ranging from 1.64–2.35 Å. In the fifth V+4.33+ site, V+4.33+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of V–O bond distances ranging from 1.62–2.41 Å. In the sixth V+4.33+ site, V+4.33+ is bonded to six O2- atoms to form distorted VO6 octahedra that share corners with four CH3O tetrahedra. There are a spread of V–O bond distances ranging from 1.62–2.24 Å. There are twelve inequivalent C2- sites. In the first C2- site, C2- is bonded to three H1+ and one O2- atom to form CH3O tetrahedra that share a cornercorner with one VO6 octahedra. The corner-sharing octahedral tilt angles are 57°. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the second C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.44 Å. In the third C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.44 Å. In the fourth C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.44 Å. In the fifth C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the sixth C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the seventh C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the eighth C2- site, C2- is bonded to three H1+ and one O2- atom to form CH3O tetrahedra that share a cornercorner with one VO6 octahedra. The corner-sharing octahedral tilt angles are 56°. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the ninth C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the tenth C2- site, C2- is bonded in a tetrahedral geometry to three H1+ and one O2- atom. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the eleventh C2- site, C2- is bonded to three H1+ and one O2- atom to form CH3O tetrahedra that share a cornercorner with one VO6 octahedra. The corner-sharing octahedral tilt angles are 55°. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. In the twelfth C2- site, C2- is bonded to three H1+ and one O2- atom to form CH3O tetrahedra that share a cornercorner with one VO6 octahedra. The corner-sharing octahedral tilt angles are 56°. All C–H bond lengths are 1.10 Å. The C–O bond length is 1.43 Å. There are thirty-six inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twelfth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirteenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the fourteenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the fifteenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the sixteenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the seventeenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the eighteenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the nineteenth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twentieth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-first H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-second H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-third H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-fourth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-fifth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-sixth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-seventh H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-eighth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the twenty-ninth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirtieth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirty-first H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirty-second H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirty-third H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirty-fourth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirty-fifth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. In the thirty-sixth H1+ site, H1+ is bonded in a single-bond geometry to one C2- atom. There are nineteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal planar geometry to two V+4.33+ and one C2- atom. In the second O2- site, O2- is bonded in a trigonal planar geometry to two V+4.33+ and one C2- atom. In the third O2- site, O2- is bonded in a trigonal planar geometry to two V+4.33+ and one C2- atom. In the fourth O2- site, O2- is bonded in a trigonal planar geometry to two V+4.33+ and one C2- atom. In the fifth O2- site, O2- is bonded in a trigonal planar geometry to two V+4.33+ and one C2- atom. In the sixth O2- site, O2- is bonded in a distorted trigonal planar geometry to two V+4.33+ and one C2- atom. In the seventh O2- site, O2- is bonded in a trigonal planar geometry to two V+4.33+ and one C2- atom. In the eighth O2- site, O2- is bonded in a trigonal planar geometry to two V+4.33+ and one C2- atom. In the ninth O2- site, O2- is bonded in an octahedral geometry to six V+4.33+ atoms. In the tenth O2- site, O2- is bonded in a single-bond geometry to one V+4.33+ atom. In the eleventh O2- site, O2- is bonded in a single-bond geometry to one V+4.33+ atom. In the twelfth O2- site, O2- is bonded in a single-bond geometry to one V+4.33+ atom. In the thirteenth O2- site, O2- is bonded in a single-bond geometry to one V+4.33+ atom. In the fourteenth O2- site, O2- is bonded in a single-bond geometry to one V+4.33+ atom. In the fifteenth O2- site, O2- is bonded in a single-bond geometry to one V+4.33+ atom. In the sixteenth O2- site, O2- is bonded in a distorted trigonal planar geometry to two V+4.33+ and one C2- atom. In the seventeenth O2- site, O2- is bonded in a distorted trigonal planar geometry to two V+4.33+ and one C2- atom. In the eighteenth O2- site, O2- is bonded in a distorted trigonal planar geometry to two V+4.33+ and one C2- atom. In the nineteenth O2- site, O2- is bonded in a distorted trigonal planar geometry to two V+4.33+ and one C2- atom.

36 MATERIALS SCIENCE↗

Materials Data on WO3 by Materials Project

WO3 is High-temperature superconductor-like structured and crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. W6+ is bonded to six O2- atoms to form corner-sharing WO6 octahedra. The corner-sharing octahedra tilt angles range from 4–7°. There are a spread of W–O bond distances ranging from 1.85–2.04 Å. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. In the second O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. In the third O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. In the fourth O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. There is one shorter (1.86 Å) and one longer (2.02 Å) O–W bond length. In the fifth O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. In the sixth O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Te by Materials Project

Te is High Pressure (4-7GPa) Tellurium structured and crystallizes in the orthorhombic Pmc2_1 space group. The structure is three-dimensional. there are two inequivalent Te sites. In the first Te site, Te is bonded to six Te atoms to form a mixture of distorted edge and corner-sharing TeTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–2°. There are a spread of Te–Te bond distances ranging from 3.06–3.46 Å. In the second Te site, Te is bonded to six Te atoms to form a mixture of distorted edge and corner-sharing TeTe6 octahedra. The corner-sharing octahedra tilt angles range from 0–5°. Both Te–Te bond lengths are 3.13 Å.

36 MATERIALS SCIENCE↗

Materials Data on MnNF3 by Materials Project

(MnF3)2N2 is High-temperature superconductor-derived structured and crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional and consists of four ammonia molecules and one MnF3 framework. In the MnF3 framework, Mn2+ is bonded to six F1- atoms to form corner-sharing MnF6 octahedra. The corner-sharing octahedra tilt angles range from 4–5°. There are a spread of Mn–F bond distances ranging from 1.89–2.15 Å. There are two inequivalent F1- sites. In the first F1- site, F1- is bonded in a linear geometry to two equivalent Mn2+ atoms. In the second F1- site, F1- is bonded in a linear geometry to two equivalent Mn2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on AuNCl3 by Materials Project

AuNCl3 is High Pressure (4-7GPa) Tellurium structured and crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four AuNCl3 clusters. Au5+ is bonded in a rectangular see-saw-like geometry to one N2- and three Cl1- atoms. The Au–N bond length is 1.93 Å. There are two shorter (2.31 Å) and one longer (2.35 Å) Au–Cl bond lengths. N2- is bonded in a single-bond geometry to one Au5+ atom. There are three inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Au5+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one Au5+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one Au5+ atom.

36 MATERIALS SCIENCE↗

Materials Data on CeSe2 by Materials Project

CeSe2 is High (Orthorhombic) Tridymite-like structured and crystallizes in the tetragonal I-4c2 space group. The structure is three-dimensional. Ce4+ is bonded to four Se2- atoms to form corner-sharing CeSe4 tetrahedra. All Ce–Se bond lengths are 2.71 Å. There are three inequivalent Se2- sites. In the first Se2- site, Se2- is bonded in a linear geometry to two equivalent Ce4+ atoms. In the second Se2- site, Se2- is bonded in a bent 150 degrees geometry to two equivalent Ce4+ atoms. In the third Se2- site, Se2- is bonded in a linear geometry to two equivalent Ce4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on MnNF3 by Materials Project

(MnF3)2N2 is High-temperature superconductor-derived structured and crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional and consists of four ammonia molecules and one MnF3 framework. In the MnF3 framework, Mn2+ is bonded to six F1- atoms to form corner-sharing MnF6 octahedra. The corner-sharing octahedral tilt angles are 2°. There are a spread of Mn–F bond distances ranging from 1.89–2.14 Å. There are two inequivalent F1- sites. In the first F1- site, F1- is bonded in a linear geometry to two equivalent Mn2+ atoms. In the second F1- site, F1- is bonded in a linear geometry to two equivalent Mn2+ atoms.

36 MATERIALS SCIENCE↗

The effect of heavy rain on an airfoil at high lift

No serious studies of the relationship of heavy rain to aircraft safety were made until 1981 when it was suggested that the torrential rain which often occurs at the time of severe wind shear might substantially increase the danger to aircraft operating at slow speeds and high lift in the vicinity of airports. While these data were not published until early 1983, appropriate measures were taken by NASA to study the effect of heavy rain on the lift of wings typical of commercial aircraft. One of the aspects of these tests that seemed confirmed by the data was the existence of a velocity effect on the lift data. The data seemed to indicate that when all the normal non-dimensional aerodynamic parameters were used to sort out the data, the effect of velocity was not accounted for, as it usually is, by the effect of dynamic pressure. Indeed, the measured lift coefficients at high lift indicated a dropoff in lift coefficient for the same free-stream water content as velocity was increased. indicated a drop-off in lift coefficient for the same free-stream water content as velocity was increased.

Donaldson, Coleman DUP.↗

Particle displacement tracking applied to air flows

Electronic Particle Image Velocimeter (PIV) techniques offer many advantages over conventional photographic PIV methods such as fast turn around times and simplified data reduction. A new all electronic PIV technique was developed which can measure high speed gas velocities. The Particle Displacement Tracking (PDT) technique employs a single cw laser, small seed particles (1 micron), and a single intensified, gated CCD array frame camera to provide a simple and fast method of obtaining two-dimensional velocity vector maps with unambiguous direction determination. Use of a single CCD camera eliminates registration difficulties encountered when multiple cameras are used to obtain velocity magnitude and direction information. An 80386 PC equipped with a large memory buffer frame-grabber board provides all of the data acquisition and data reduction operations. No array processors of other numerical processing hardware are required. Full video resolution (640x480 pixel) is maintained in the acquired images, providing high resolution video frames of the recorded particle images. The time between data acquisition to display of the velocity vector map is less than 40 sec. The new electronic PDT technique is demonstrated on an air nozzle flow with velocities less than 150 m/s.

Wernet, Mark P.↗

An experimental investigation of hollow cathode-based plasma contactors

Experimental results are presented which describe operation of the plasma environment associated with a hollow cathod-based plasma contactor collecting electrons from or emitting them to an ambient, low density Maxwellian plasma. A one-dimensional, phenomenological model of the near-field electron collection process, which was formulated from experimental observations, is presented. It considers three regions, namely, a plasma cloud adjacent to the contactor, an ambient plasma from which electrons are collected, and a double layer region that develops between the contactor plasma cloud and the ambient plasma regions. Results of the electron emission experiments are also presented. An important observation is made using a retarding potential analyzer (RPA) which shows that high energy ions generally stream from a contactor along with the electrons being emitted. A mechanism for this phenomenon is presented and it involves a high rate of ionization induced between electrons and atoms flowing together from the hollow cathode orifice. This can result in the development of a region of high positive potential. Langmuir and RPA probe data suggest that both electrons and ions expand spherically from this hill region. In addition to experimental observations, a one-dimensional model which describes the electron emission process and predicts the phenomena just mentioned is presented and shown to agree qualitatively with these observations.

Williams, John D.↗

Investigation of high‐level waste glass melting using X‐ray computed tomography

Abstract A method has been developed to quantitatively assess the melting behavior of simulated nuclear waste glasses in a 5‐cm‐diameter stainless steel beaker heated from the bottom. The method applies X‐ray scanning and computed tomography to build three‐dimensional volumetric data of a heat‐treated sample and performs an adaptive segmentation analysis of the volumetric data to identify morphologically distinct regions in the sample matrix and quantify the amount of material in each region based on computed tomography density. The method was applied to two different series of simulated high‐level waste glass melter feeds, and the results showed that it provides detailed images of samples at various stages of melting, including distribution of gas bubbles of varying sizes within the sample matrix, as well as a quantitative measure of how fast various waste/frit feeds melted relative to each other. The results show that the melting rate is influenced by the rate of calcine gas evolution, melt viscosity, and the presence of modifier ions in the feed.

Choi, Alexander S.↗

A Geometry-Driven Longitudal Topic Model

A simple and scalable framework for longitudinal analysis of Twitter data is developed that combines latent topic models with computational geometric methods. Dimensionality reduction tools from computational geometry are applied to learn the intrinsic manifold on which the latent, temporal topics reside. Then shortest path distances on the manifold are used to link together these topics. The proposed framework permits visualization of the low-dimensional embedding which provides clear interpretation of the complex, high-dimensional trajectories that may exist among latent topics. Practical application of the proposed framework is demonstrated through its ability to capture and effectively visualize natural progression of latent COVID-19 related topics learned from Twitter data. Interpretability of the trajectories is achieved by comparing to real-world events. In addition, the framework permits study of spatial variation in Twitter behavior for learned topics. The analysis demonstrates that the proposed framework is able to capture granular-level impact of COVID-19 on public discussions. We end by arguing that Twitter data, when analyzed within the proposed framework, can serve as a valuable supplementary data stream for COVID-related studies.

97 MATHEMATICS AND COMPUTING↗

Understanding the interplay between pilot fuel mixing and auto-ignition chemistry in hydrogen-enriched environment

The diesel-piloted dual-fuel compression ignition combustion strategy is well-suited to accelerate the decarbonization of transportation by adopting hydrogen as a renewable energy carrier into the existing internal combustion engine with minimal engine modifications. Despite the simplicity of engine modification, many questions remain unanswered regarding the optimal pilot injection strategy for reliable ignition with minimum pilot fuel consumption. The present study uses a single-cylinder heavy-duty optical engine to explore the phenomenology and underlying mechanisms governing the pilot fuel ignition and the subsequent combustion of a premixed hydrogen-air charge. The engine is operated in a dual-fuel mode with hydrogen premixed into the engine intake charge with a direct pilot injection of n-heptane as a diesel pilot fuel surrogate. Optical diagnostics used to visualize in-cylinder combustion phenomena include high-speed IR imaging of the pilot fuel spray evolution as well as high-speed HCHO* and OH* chemiluminescence as indicators of low-temperature and high-temperature heat release, respectively. Three pilot injection strategies are compared to explore the effects of pilot fuel mass, injection pressure, and injection duration on the probability and repeatability of successful ignition. The thermodynamic and imaging data analysis supported by zero-dimensional chemical kinetics simulations revealed a complex interplay between the physical and chemical processes governing the pilot fuel ignition process in a hydrogen containing charge. Hydrogen strongly inhibits the ignition of pilot fuel mixtures and therefore requires longer injection duration to create zones with sufficiently high pilot fuel concentration for successful ignition. Results show that ignition typically tends to rely on stochastic pockets with high pilot fuel concentration, which results in poor repeatability of combustion and frequent misfiring. In conclusion, this work has improved the understanding on how the unique chemical properties of hydrogen pose a challenge for maximization of hydrogen’s energy share in hydrogen dual-fuel engines and highlights a potential mitigation pathway.

33 ADVANCED PROPULSION SYSTEMS↗

Vented and sealed cookoff of powdered and pressed ε-CL-20

In this work, we have completed a series of vented and sealed cookoff experiments of the ε-polymorph of CL-20 in our Sandia Instrumented Thermal Ignition (SITI) apparatus using both powder and pressed pellets at nominal densities of 313 ± 8 kg/m 3 and 1030 ± 4 kg/m 3 , respectively. The boundary temperature of our aluminum confinement cylinder was ramped in 10 minutes from room temperature to a prescribed set-point temperature ranging between 448 nd 468 K and held at the set-point temperature until ignition. A universal cookoff model (UCM) has been calibrated using the ε-CL-20 SITI data to predict pressurization and thermal ignition of ε-CL-20. The ignition model was validated by using one-dimensional time-to-explosion (ODTX) ignition data from a different laboratory. We found that a thirtyfold increase in the reaction rates due to liquefaction at 520 K could explain the high temperature ODTX cookoff data. The model gives a plausible explanation of why melting is important in fast cookoff events involving CL-20. Our model also gives support to 520 K as the liquefaction point of CL-20, which has different values in the literature.

36 MATERIALS SCIENCE↗

High-precision determination of low-energy effective parameters for a two-dimensional Heisenberg quantum antiferromagnet

The two-dimensional (2D) spin-(1/2) Heisenberg antiferromagnet with exchange coupling J is investigated on a periodic square lattice of spacing a at very small temperatures using the loop-cluster algorithm. Monte Carlo data for the staggered and uniform susceptibilities are compared with analytic results obtained in the systematic low-energy effective field theory for the staggered magnetization order parameter. The low-energy parameters of the effective theory, i.e., the staggered magnetization density M{sub s}=0.307 43(1)/a{sup 2}, the spin stiffness {rho}{sub s}=0.180 81(11)J, and the spin wave velocity c=1.6586(3)Ja, are determined with very high precision. Our study may serve as a test case for the comparison of lattice quantum chromodynamics Monte Carlo data with analytic predictions of the chiral effective theory for pions and nucleons, which is vital for the quantitative understanding of the strong interaction at low energies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Particle displacement tracking applied to air flows

Electronic Particle Image Velocimetric (PIV) techniques offer many advantages over conventional photographic PIV methods such as fast turn around times and simplified data reduction. A new all electronic PIV technique was developed which can measure high speed gas velocities. The Particle Displacement Tracking (PDT) technique employs a single CW laser, small seed particles (1 micron), and a single intensified, gated CCD array frame camera to provide a simple and fast method of obtaining two-dimensional velocity vector maps with unambiguous direction determination. Use of a single CCD camera eliminates registration difficulties encountered when multiple cameras are used to obtain velocity magnitude and direction information. An 80386 PC equipped with a large memory buffer frame-grabber board provides all of the data acquisition and data reduction operations. No array processors of other numerical processing hardware are required. Full video resolution (640 x 480 pixel) is maintained in the acquired images, providing high resolution video frames of the recorded particle images. The time between data acquisition to display of the velocity vector map is less than 40 sec. The new electronic PDT technique is demonstrated on an air nozzle flow with velocities less than 150 m/s.

Wernet, Mark P.↗

Simulations of the flow past a cylinder using an unsteady double wake model

In the present work, the in-house UnSteady Double Wake Model (USDWM) is used to simulate flows past a cylinder at subcritical, supercritical, and transcritical Reynolds numbers. The flow model is a two-dimensional panel method which uses the unsteady double wake technique to model flow separation and its dynamics. In the present work the separation location is obtained from experimental data and fixed in time. The highly unsteady flow field behind the cylinder is analyzed in detail, comparing the vortex shedding charactericts under the different flow conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unsteady design-point flow phenomena in transonic compressors

High-frequency response probes which had previously been used exclusively in the MIT Blowndown Facility were successfully employed in two conventional steady state axial flow compressor facilities to investigate the unsteady flowfields of highly loaded transonic compressors at design point operation. Laser anemometry measurements taken simultaneously with the high response data were also analyzed. The time averaged high response data of static and total pressure agreed quite well with the conventional steady state instrumentation except for flow angle which showed a large spread in values at all radii regardless of the type of instrumentation used. In addition, the time resolved measurements confirmed earlier test results obtained in the MIT Blowdown Facility for the same compressor. The results of these tests have further revealed that the flowfields of highly loaded transonic compressors are heavily influenced by unsteady flow phenomena. The high response measurements exhibited large variations in the blade to blade flow and in the blade passage flow. The observed unsteadiness in the blade wakes is explained in terms of the rotor blades' shed vorticity in periodic vortex streets. The wakes were modeled as two-dimensional vortex streets with finite size cores. The model fit the data quite well as it was able to reproduce the average wake shape and bi-modal probability density distributions seen in the laser anemometry data. The presence of vortex streets in the blade wakes also explains the large blade to blade fluctuations seen by the high response probes which is simply due to the intermittent sampling of the vortex street as it is swept past a stationary probe.

Gertz, J. B.↗