Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High average power ultrafast laser technologies for driving future advanced accelerators

Large scale laser facilities are needed to advance the energy frontier in high energy physics and accelerator physics. Laser plasma accelerators are core to advanced accelerator concepts aimed at reaching TeV electron electron colliders. In these facilities, intense laser pulses drive plasmas and are used to accelerate electrons to high energies in remarkably short distances. A laser plasma accelerator could in principle reach high energies with an accelerating length that is 1000 times shorter than in conventional RF based accelerators. Notionally, laser driven particle beam energies could scale beyond state of the art conventional accelerators. LPAs have produced multi GeV electron beams in about 20 cm with relative energy spread of about 2 percent, supported by highly developed laser technology. This validates key elements of the US DOE strategy for such accelerators to enable future colliders but extending best results to date to a TeV collider will require lasers with higher average power. While the per pulse energies envisioned for laser driven colliders are achievable with current lasers, low laser repetition rates limit potential collider luminosity. Applications will require rates of kHz to tens of kHz at Joules of energy and high efficiency, and a collider would require about 100 such stages, a leap from current Hz class LPAs. This represents a challenging 1000 fold increase in laser repetition rates beyond current state of the art. Here, this whitepaper describes current research and outlook for candidate laser systems as well as the accompanying broadband and high damage threshold optics needed for driving future advanced accelerators.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Universal free-energy landscape produces efficient and reversible electron bifurcation

For decades, it was unknown how electron-bifurcating systems in nature prevented energy-wasting short-circuiting reactions that have large driving forces, so synthetic electron-bifurcating molecular machines could not be designed and built. The underpinning free-energy landscapes for electron bifurcation were also enigmatic. We predict that a simple and universal free-energy landscape enables electron bifurcation, and we show that it enables high-efficiency bifurcation with limited short-circuiting (the EB scheme). The landscape relies on steep free-energy slopes in the two redox branches to insulate against short-circuiting using an electron occupancy blockade effect, without relying on nuanced changes in the microscopic rate constants for the short-circuiting reactions. The EB scheme thus unifies a body of observations on biological catalysis and energy conversion, and the scheme provides a blueprint to guide future campaigns to establish synthetic electron bifurcation machines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Cost-Optimized Cold Climate Heat Pump Development and Field Test

Cold climate heat pumps (CCHPs) expand the heat pump market to climates where heating demand is dominant. They can achieve more than 70% energy savings compared with electric resistance heating and operate at lower cost than using tank-stored propane to fuel a furnace. A high-efficiency heat pump with a heating seasonal performance factor (HSPF)—as defined by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI 2008)—greater than 10.0 would be more efficient than gas heating in terms of source energy. However, developing a cost-effective CCHP involves some challenges. A typical single-speed, air-source heat pump (ASHP) with an HSPF of 7.7 Btu/Wh does not work well under cold outdoor temperature conditions typical of cold climate locations for four major reasons: 1. Discharge temperature is too high—The low suction pressure and high compression pressure ratio at low ambient temperatures causes high compressor discharge temperatures in excess of the maximum limit for many of the compressors on the market. Furthermore, system charge of a heat pump is usually optimized in the cooling mode, which leads to overcharge conditions in the heating mode, further increasing the discharge temperature. 2. Heating capacity is insufficient if sized to meet the building design cooling load— Heating capacity of a single-speed heat pump decreases with ambient temperature. The heating capacity at -13°F (-25°C) typically decreases to 20%–40% of the rated heating capacity at 47°F (8.3°C) (~equivalent to the rated cooling capacity at 95°F [35°C]). Therefore, a single-speed heat pump, typically sized to match the building design cooling load, cannot provide adequate heating capacity to match the building heating load at low ambient temperatures. The capacity deficit is filled by inefficient resistance heat, thus lowering the system efficiency and significantly increasing power demand. 3. Cyclic loss is significant if sized to meet the building design heating load—If a single-speed heat pump is sized to meet the heating load, it will be significantly oversized relative to the cooling load in many cold climates. This will cause excessive on/off cyclic loss during the cooling and heating operations at moderately low ambient temperatures. Thus, capacity modulation capability (e.g., using a variable-speed or multi-stage compressor) is necessary for a CCHP, which uses its full capacity to meet the peak heating load and partial capacity to meet the cooling and part-load heating loads. 4. Coefficient of performance (COP) is low—Heating COP degrades significantly at low ambient temperatures owing to the large temperature difference between the heat source and sink. A target CCHP should be sized to meet the building design heating load while minimizing the cyclic loss for the cooling and heating operations at moderate ambient temperatures.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Effect of Molecular Conformation on Intermolecular Interactions and Photovoltaic Performances of Giant Molecule Acceptors

The molecular conformation of giant molecule acceptors (GMAs) plays a significant role in regulating the intermolecular interactions and their photovoltaic performances in organic solar cells (OSCs). For the linear GMA GT‐l, the stronger homo‐molecular interaction causes its aggregation being weakly affected by the donor, thus forming an ordered molecular stacking and proper phase separation in its blend film. The star‐shaped GMA GT‐s‐based blend film shows a dominant hetero‐molecular interaction that suppresses the aggregation of the donor and acceptor, resulting in smaller phase separation and more uniform vertical phase distribution. While for another star‐shaped GMA GTs, the weakest hetero‐molecular interaction causes its blend film to form larger phase separation. Therefore, the GT‐l based OSC with PM6 as donor shows the highest charge mobilities, the fastest charge transfer (CT) process, reduced energy loss and less charge recombination, contributing to a higher power conversion efficiency (PCE) of 19.03%. Comparatively, the PCEs of the OSCs based on GTs and GT‐s are 18.05% and 17.58% respectively. Notably, all the three GMAs based OSCs show excellent thermal stability and long‐term storage stability. This study provides a facile strategy by tuning the linking unit and its connecting mode for designing highly efficient and stable organic photovoltaic materials.

Chemistry↗
DOE OSTI2022

Development of Carbon Molecular Sieves Hollow Fiber Membranes based on Polybenzimidazole Doped with Polyprotic Acids with Superior H 2 /CO 2 Separation Properties (Final Report)

The goal of this project was to develop a highly efficient membrane-based process to capture CO 2 from coal-derived syngas with 95% CO 2 purity, achieving the cost of electricity (COE) 30% below the baseline capture approaches (i.e., Selexol process) when coupled with the advancement in other areas of the power generation facility. Our core approach is based on high-permeance hollow fiber membranes (HFMs) with superior H 2 /CO 2 separation properties at the syngas process conditions, which can then be further utilized to design membrane reactors for process intensification of H 2 production and purification and CO 2 capture. Three organizations with complementary skills collaborated to achieve the goal, including the University at Buffalo (UB), Los Alamos National Laboratory (LANL), and Trimeric Corporation (Trimeric). We formulated logical steps to bring the membrane technology from Technology Readiness Level (TRL) 3 (Experimental proof of concept) to TRL 4 (Laboratory scale validation in relevant environment). During the budget period (BP) 1, we screened various polymeric materials and identified polybenzimidazole doped with inorganic polyprotic acids as the desirable platform. The acid doping increases the H 2 /CO 2 selectivity, and the sequential carbonization increases H 2 permeability while retaining the high selectivity. By manipulating the acid type and doping level and the carbonization temperature, we demonstrated advanced carbon molecular sieving (CMS) materials with H 2 permeability of above 200 Barrer (1 Barrer = 10 -10 cm 3 (STP) cm cm -2 s -2 cmHg -1 ) and H 2 /CO 2 selectivity of above 40 at 200-300°C with simulated syngas containing CO and water vapor. For example, the PBI-(H 3 PO 4 ) 0.11 carbonized at 700 °C exhibits H 2 permeability of 200 Barrer and H 2 /CO 2 selectivity of 60 at 200 °C, and H 2 permeability of 240 Barrer and H 2 /CO 2 selectivity of 54 at 225 °C, which meets the targeted properties and surpasses Robeson’s upper bound. During the BP2, we focused on the conversion of the advanced CMS materials to stable HFMs. Membranes with H 2 permeance of 1,090 GPU (1 GPU = 10 -6 cm 3 (STP) cm -2 s -2 cmHg -1 ) and H 2 /CO 2 selectivity of 57 at 300 °C were successfully fabricated. The effects of temperature, gas compositions, pressure, and time on the separation properties were systematically investigated. Pencil modules were continuously evaluated for 219 h (dry pure gas) and 669 h (dry simulated syngas) and showed initial decline in permeance and increased H 2 /CO 2 selectivity over time, ultimately achieving a steady state stable value, indicating that the ageing phenomena in the nanoporous structures of the membranes during the test. Membrane reactors were fabricated based on the CMS membranes and evaluated for water-gas shift (WGS) reaction. The use of membranes slightly improves the conversion of the CO. However, parametric tests of the membrane reactors at various temperatures and flow rates need to be conducted, as well as the membranes with improved separation performance. We performed a sensitivity analysis on the impact of H 2 /CO 2 selectivity on the COE based on a hybrid process of a membrane unit and cryogenic unit developed by Membrane Technology and Research, Inc. (MTR). Three H 2 /CO 2 selectivity (40, 60, and 15) cases were developed and compared with the baseline capture process (Case B5B) provided by the DOE report. Increasing the membrane H 2 /CO 2 selectivity reduces COE, but the rate of the decrease of COE also diminishes. The COE values for H 2 /CO 2 selectivities of 40 and 60 were nearly the same. As the H 2 /CO 2 selectivity increases, the inert recycling decreases, leading to smaller equipment, less auxiliary power requirements, and less heating, cooling, and refrigeration duty. The refrigeration system used to liquefy the CO 2 is the most expensive piece of equipment and consumes the most electricity within the CO 2 capture process. Increasing the CO 2 concentration in the recycle stream would improve the economics of the process by reducing the refrigeration duty requirement of the unit and also allow for higher liquefaction temperatures. The high H 2 -selective membrane developed by our team may be applicable in other separation processes where lower pressure H 2 retains value. Typically, hydrogen retains its pressure when it is separated from syngas components. Residual components may be used as low-quality fuel and then vented to the atmosphere. Applications might include control of H 2 /CO ratios or mitigation of the water gas shift reaction by CO 2 recycling to the feed of a gasifier or steam methane reformer. To summarize, we have developed industrial HFMs with the best H 2 /CO 2 separation performance reported in the literature. The membranes demonstrate stability with simulated syngas and show great potential for membrane reactors for WGS reactions, lowering the cost of blue H 2 production.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Why Perovskite Thermal Stress is Unaffected by Thin Contact Layers

Metal halide perovskite photovoltaics have emerged as a high efficiency, low-cost alternative that can potentially rival or enhance conventional silicon technology. Despite exceptional initial power conversion efficiencies, achieving compliance with international standards and widespread adoption requires further enhancements to their operational stability. Notably, addressing mechanical strain and stress in brittle perovskites has emerged as a pivotal approach to mitigate chemical degradation and improve reliability during thermal cycling. Here, in this study, a popularized strain engineering strategy is investigated in which a high coefficient of thermal expansion (CTE) hole transport layer (i.e., PDCBT) is cast onto inorganic perovskite (CsPbI 2 Br) at 100 °C. Contrary to previously published results, the X-ray diffraction (XRD):Sin 2 ψ and substrate curvature measurement techniques show that the hole transport layer has no discernible impact on perovskite strain. The accuracy of the XRD:Sin 2 ψ method for measuring strain is highlighted in contrast to an analysis based on shifts of single XRD peaks which can be influenced by multiple artifacts. The findings in this study are in accordance with mechanics theory: thin layers are unable to induce significant strain changes in perovskite thin films as the force they apply is negligible compared to that applied by a thick and stiff substrate.

14 SOLAR ENERGY↗
DOE OSTI2020

On the Marriage of Asynchronous Many Task Runtimes and Big Data: A Glance

The rise of the accelerator-based architectures and reconfigurable computing have showcased the weakness of software stack toolchains that still maintain a static view of the hardware instead of relying on a symbiotic relationship between static (e.g., compilers) and dynamic tools (e.g., runtimes). In the past decades, this need has given rise to adaptive runtimes with increasingly finer computational tasks. These finer tasks help to take advantage of the hardware by switching out when a long latency operation is encountered (because of the deeper memory hierarchies and new memory technologies that might target streaming instead of random access), thus trading off idle time for unrelated work. Examples of these finer task runtimes are Asynchronous Many Task (AMT) runtimes, in which highly efficient computational graphs run on a variety of hardware. Due to its inherent latency tolerant characteristics, Latency-sensitive applications, such as Graph Analytics and Big Data can effectively use these runtimes. This paper aims to present an example of how the careful design of an AMT can exploit the hardware substrate when faced with high latency applications such as the ones given in the Big Data domain. Moreover, with its introspection and adaptive capabilities, we aim to show the power of these runtimes when facing the changing requirements of the application workloads. We use the Performance Open Community Runtime (P-OCR) as our vehicle to demonstrate the concepts presented here.

adaptive runtime, big data analysis↗
DOE OSTI2020

Isolating p- and n-Doped Fingers With Intrinsic Poly-Si in Passivated Interdigitated Back Contact Silicon Solar Cells

Polycrystalline silicon on silicon oxide (poly-Si/SiO x ) passivating contacts enable ultra high efficiency interdigitated back contact silicon solar cells. To prevent shunt between n- and p-type doped fingers, an insulating region is required between them. We evaluate the use of intrinsic poly Si for this isolation region. Interdigitated fingers were formed by plasma deposition of doped hydrogenated amorphous silicon through mechanically aligned shadow masks, on top of a full-area intrinsic amorphous silicon layer. High temperature annealing then crystallized the a-Si:H to poly Si and drove in the dopants. Two mechanisms were identified which cause contamination of the intrinsic poly Si gap during processing. During deposition of doped fingers, we show using secondary ion mass spectrometry and conductivity measurements that the intrinsic gap becomes contaminated by doped a-Si:H tails several nanometers thick to concentrations of ~10 20 cm -3 . Another source of contamination occurs during high-temperature annealing, where dopants desorb from doped regions and readsorb onto intrinsic a Si:H. Both pathways reduce the resistivity of the intrinsic gap from ~10 5 Ω·cm to ~10 -1 Ω·cm. We show that plasma etching of the a-Si:H surface before crystallizing with a capping layer can eliminate the contamination of the intrinsic poly-Si, maintaining a resistivity of ~10 5 Ω·cm. Lastly, this demonstrates masked plasma deposition as a dopant patterning method for Si solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Designer Metal–Organic Frameworks for Size–Exclusion–Based Hydrocarbon Separations: Progress and Challenges

The separation of hydrocarbons is of primary importance in the petrochemical industry but remains a challenging process. Hydrocarbon separations have traditionally relied predominantly on costly and energy intensive heat-driven procedures such as low temperature distillations. Adsorptive separation based on porous solids represents an alternative technology that is potentially more energy efficient for the separation of some hydrocarbons. Great efforts have been made recently not only on the development of adsorbents with optimal separation performance but also towards the subsequent implementation of adsorption-based separation technology. Emerging as a relatively new class of multifunctional porous materials, metal-organic frameworks hold substantial promise as adsorbents for highly efficient separation of hydrocarbons. This is because of their exceptional and intrinsic porosity tunability which enables size-exclusion based separations that render the highest possible separation selectivity. In this review, we highlight the recent advances in the development of MOFs for separation of selected groups of hydrocarbons, including methane/C2 hydrocarbons, normal alkanes, alkane isomers, alkane/alkene/alkyne, and C8 alkylaromatics, with a particular focus on separations based on size-exclusion mechanism. Insights into tailor-made structures, material design strategies, and structure-property relations will be elucidated. In addition, the existing challenges and possible future directions of this important research field will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Seed‐Assisted Growth for Scalable and Efficient Perovskite Solar Modules

Perovskite solar modules (PSMs) have shown remarkable photovoltaic potentials, but they still suffer from large power conversion efficiency (PCE) loss on scale‐up and instability due to inferior uniformity and crystallization over large areas. Herein, the scalable production of efficient and stable PSMs using a suite of all‐scalable fabrication methods featuring a two‐step blade/dip‐coating approach to deposit the perovskite absorber layer is demonstrated. Rubidium chloride is introduced to embed (PbI 2 ) 2 RbCl complex seeds in the first‐deposited PbI 2 precursor, which assists in uniform crystallization of the perovskite layer with high crystallinity and reduced defect density over large areas. Following the optimization of RbCl additives, a champion PSM with 17.9% PCE on a 7.6 × 7.6 cm 2 substrate with a 37 cm 2 aperture area is achieved. Moreover, the RbCl‐incorporated PSMs demonstrate excellent reproducibility and stability under continuous 1 sun illumination. This work shows that the two‐step blade/dip coating is a promising method for producing high‐efficiency and stable PSMs on an industrially relevant scale.

Energy & Fuels↗
DOE OSTI2022

Programmable heating and quenching for efficient thermochemical synthesis

Conventional thermochemical syntheses by continuous heating under near-equilibrium conditions face critical challenges in improving the synthesis rate, selectivity, catalyst stability and energy efficiency, owing to the lack of temporal control over the reaction temperature and time, and thus the reaction pathways. As an alternative, we present a non-equilibrium, continuous synthesis technique that uses pulsed heating and quenching (for example, 0.02 s on, 1.08 s off) using a programmable electric current to rapidly switch the reaction between high (for example, up to 2,400 K) and low temperatures. The rapid quenching ensures high selectivity and good catalyst stability, as well as lowers the average temperature to reduce the energy cost. Using CH4 pyrolysis as a model reaction, our programmable heating and quenching technique leads to high selectivity to value-added C2 products (>75% versus <35% by the conventional non-catalytic method and versus <60% by most conventional methods using optimized catalysts). Our technique can be extended to a range of thermochemical reactions, such as NH 3 synthesis, for which we achieve a stable and high synthesis rate of about 6,000 μmol g Fe –1 h –1 at ambient pressure for >100 h using a non-optimized catalyst. Furthermore, this study establishes a new model towards highly efficient non-equilibrium thermochemical synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cationic and Anionic Redox of Battery Cathodes Investigated by Advanced Synchrotron‐Based Mapping of Resonant Inelastic X‐ray Scattering

Abstract Redox reaction builds the foundation stone for the energy density of rechargeable battery cathodes. Probing and understanding the redox reaction behavior is crucial, but also extremely formidable, which requires individual and reliable detection of cationic and anionic redox states. Fortunately, the recently developed ultra‐high‐efficiency mapping of resonant inelastic X‐ray scattering (mRIXS) has emerged as a powerful tool to probe the battery chemistry states. Here, the latest advances of employing advanced mRIXS is summarized to investigate the cationic and anionic redox mechanism of battery cathodes during electrochemical operation. Owing to the new dimension of information along the emission energy and high sensitivity to valence 3d states, 3d transition‐metal L ‐edge (TM‐ L ) mRIXS can eliminate the lineshape distortion in conventional 3d TM‐ L fluorescence X‐ray absorption spectra and investigate the cationic redox quantitatively. Moreover, O‐ K mRIXS could fingerprint the intrinsic oxidized lattice oxygen states and quantify the oxygen redox (OR) reversibility, thus demystifying the controversy in traditional wisdom. In addition, different modification strategies coupled with underlying mechanisms for regulating the activity and reversibility of OR utilizing mRIXS are also summarized. This review provides valuable guidance for further exploration of underlying reaction mechanisms of battery cathodes by mRIXS, along with both technological and scientific improvements.

Cheng, Chen↗
DOE OSTI2020

Light‐driven catalysis with engineered enzymes and biomimetic systems

Abstract Efforts to drive catalytic reactions with light, inspired by natural processes like photosynthesis, have a long history and have seen significant recent growth. Successfully engineering systems using biomolecular and bioinspired catalysts to carry out light‐driven chemical reactions capitalizes on advantages offered from the fields of biocatalysis and photocatalysis. In particular, driving reactions under mild conditions and in water, in which enzymes are operative, using sunlight as a renewable energy source yield environmentally friendly systems. Furthermore, using enzymes and bioinspired systems can take advantage of the high efficiency and specificity of biocatalysts. There are many challenges to overcome to fully capitalize on the potential of light‐driven biocatalysis. In this mini‐review, we discuss examples of enzymes and engineered biomolecular catalysts that are activated via electron transfer from a photosensitizer in a photocatalytic system. We place an emphasis on selected forefront chemical reactions of high interest, including CH oxidation, proton reduction, water oxidation, CO 2 reduction, and N 2 reduction.

Edwards, Emily H.↗
DOE OSTI2022

Ionic Liquid Engineering in Perovskite Photovoltaics

Over the past decade, perovskite photovoltaics have approached other currently available technologies and proven to be the most prospective type of solar cells. Although the many-sided research in this very active field has generated consistent results with regard to their undisputed consistently increasing power conversion efficiency, it also produced several rather contradictory opinions. Among other important details, debate surrounding their proneness to surface degradation and poor mechanical robustness, as well as the environmental footprint of this materials class, remains a moot point. The application of ionic liquids appears as one of the potential remedies to some of these challenges due to their high conductivity, the opportunities for chemical “tuning” of the structure, and relatively lower environmental footprint. This article provides an overview, classification, and applications of ionic liquids in perovskite solar cells. Here, we summarize the use and role of ionic liquids as versatile additives, solvents, and modifiers in perovskite precursor solution, in charge transport layer, and in interfacial and stability engineering. Finally, challenges and the future prospects for the design and/or selection of ionic liquids with a specific profile that meets the requirements for next-generation highly efficient and stable perovskite solar cells are proposed.

14 SOLAR ENERGY↗
DOE OSTI2020

Extraction of Ln(III) and An(III) from Alkaline Solutions by Sulfonamide Ligands and Analogs - 20216

As part of our effort to develop advanced separations involving combined extraction of cesium, strontium, and actinides from High-Level Waste (HLW) at the Savannah River Site, we are now reporting highly efficient extraction of Sm(III) from aqueous media of various alkalinity by dichloromethane solutions of several ligands, including tri-sulfonamides, o-mono-sulfonamido-phenols and o-phenylenediamine- derived disulfonamides. Distribution experiments and DFT calculations provide insights on the complexation of Samarium vs Americium by these ligands. Further optimization of these ligands for extraction into highly lipophilic solvents and application to HLW simulants are underway. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Ensemble Kalman filter for data assimilation coupled with low-resolution computations techniques applied in fluid dynamics

This paper presents an innovative Reduced-order model (ROM) for merging experimental and simulation data using data assimilation (DA) to estimate the "True" state of a fluid dynamics system, leading to more accurate predictions. Our methodology introduces a novel approach by implementing the ensemble Kalman filter (EnKF) within a reduced-dimensional framework, grounded in a robust theoretical foundation and applied to fluid dynamics. To address the substantial computational demands of DA, the proposed ROM employs low-resolution (LR) techniques to drastically reduce computational costs. This innovative approach involves downsampling datasets for DA computations, followed by an advanced reconstruction technique based on low-cost singular value decomposition (lcSVD). The lcSVD method, a key innovation in this paper, has never been applied to DA before and offers a highly efficient way to enhance resolution with minimal computational resources. Our results demonstrate significant reductions in both computation time and RAM usage through these LR techniques without compromising the accuracy of the estimations. For instance, in a turbulent test case, for a data compression rate of 15.9, the LR approach can achieve a speed-up of 13.7 and a RAM compression of 90.9% while maintaining a low relative root mean square error (RRMSE) of 2.6%, compared to 0.8% in the high-resolution (HR) reference. Furthermore, we highlight the effectiveness of the EnKF in estimating and predicting the state of fluid flow systems based on limited observations and given low-fidelity numerical data. This paper highlights the potential of the proposed DA method in fluid dynamics applications, particularly for improving computational efficiency in CFD and related fields. Its ability to balance accuracy with low computational and memory costs makes it especially suitable for large-scale and real-time applications, such as environmental monitoring or engineering design. This method will be incorporated into ModelFLOWs-app.

Data Assimilation↗
DOE OSTI2023

Full Exclusion of Branched Hexanes from Their Linear Isomer by a Robust Aluminum Metal–Organic Framework with Tailored Pore Structure

High-efficiency separation of hexane isomers through selective molecular exclusion represents an important yet challenging task in the petrochemical industry. It has stringent requirements on the adsorbents' pore shape and dimensions. Here we report the complete exclusion of branched hexanes from their linear isomer by an aluminum metal-organic framework, CAU-21-ODB (ODB = 4,4'-oxydibenzoate) with high stability. The unique gourd-shaped channels with suitable pore aperture lead to substantial uptake of nHEX (141 mg/g at 30 °C) but negligible adsorption of its branched isomers under identical conditions. Furthermore, the capability of CAU-21-ODB for the separation of hexane isomers has been verified by multicomponent breakthrough experiments. DFT calculations further confirm the size-exclusion based separation mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Scaling and Benchmarking an Evolutionary Algorithm for Constructing Biophysical Neuronal Models

Single neuron models are fundamental for computational modeling of the brain's neuronal networks, and understanding how ion channel dynamics mediate neural function. A challenge in defining such models is determining biophysically realistic channel distributions. Here, we present an efficient, highly parallel evolutionary algorithm for developing such models, named NeuroGPU-EA. NeuroGPU-EA uses CPUs and GPUs concurrently to simulate and evaluate neuron membrane potentials with respect to multiple stimuli. We demonstrate a logarithmic cost for scaling the stimuli used in the fitting procedure. NeuroGPU-EA outperforms the typically used CPU based evolutionary algorithm by a factor of 10 on a series of scaling benchmarks. We report observed performance bottlenecks and propose mitigation strategies. Finally, we also discuss the potential of this method for efficient simulation and evaluation of electrophysiological waveforms.

59 BASIC BIOLOGICAL SCIENCES↗