Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

The combustion chemistry of a fuel tracer: Measured flame speeds and ignition delays and a detailed chemical kinetic model for the oxidation of acetone

Acetone ignition delay and stretch-free laminar flame speed measurements have been carried out and a kinetic model has been developed to simulate these and literature data for acetone and for ketene, which was found to be an important intermediate in its oxidation. The mechanism has been based on one originally devised for dimethyl ether and modified through validation of the hydrogen, carbon monoxide and methane sub-mechanisms. Acetone oxidation in argon was studied behind reflected shock waves in the temperature range 1340-1930 K, at 1 atm and at equivalence ratios of 0.5, 1 and 2; it is also shown that the addition of up to 15% acetone to a stoichiometric n-heptane mixture has no effect on the measured ignition delay times. Flame speeds at 298 K and 1 atm of pure acetone in air were measured in a spherical bomb; a maximum flame speed of {proportional_to}35 cm s{sup -1} at {phi}=1.15 is indicated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical prediction of ion current from a small methane jet flame

This paper compares numerical simulations with experiments to describe the underlying mechanisms responsible for the voltage-current characteristic (VCC) response of a capillary-fed methane diffusion flame in an electric field. The numerical simulations, which include both combustion and electric phenomena, show good agreement with previously published experimental results, though computed flame temperatures were higher than those experimentally measured. Sub-saturated, saturated and super-saturated ion current regions are shown in the range of applied potentials: 0-2.5 kV, 2.5-3.4 kV and over 3.4 kV, respectively. The transition between the sub-saturated and saturated region is explored by predicting an evolution of the H{sub 3}O{sup +} ion profile. Furthermore, the transition between the saturated and super-saturated current region is considered by following the rate of ion production. The simulations show an enhancement of ion production at high voltages suggesting that the main factor behind the increased ion production is the entrainment of air by the ion-driven wind into the fuel jet before the reaction zone, producing a partially premixed flame. Additionally, the change in chemical reaction pathways as a result of air entrainment is discussed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of combustion intermediates in a low-pressure premixed laminar 2,5-dimethylfuran/oxygen/argon flame with tunable synchrotron photoionization

Low-pressure (4.0 kPa) premixed laminar 2,5-dimethylfuran (DMF)/oxygen/argon flame with an equivalence ratio of 2.0 was studied with tunable vacuum ultraviolet (VUV) synchrotron radiation photoionization and molecular-beam mass spectrometry. Photoionization mass spectra of DMF/O{sub 2}/Ar flame were recorded and the photoionization efficiency curves of the combustion intermediates were measured. Flame species, including isomeric intermediates, are identified by comparing the measured ionization energies with those reported in literatures or those calculated with Gaussian-3 procedure. More than 70 species have been detected, including furan and its derivatives, aromatics, and free radicals. Possible reaction pathways of DMF, 2-methylfuran, and furan are proposed based on the intermediates identified. DMF can be consumed by H-abstraction and pyrolysis reactions. 2-Methylfuran and furan can be consumed by H-abstraction, H-addition and pyrolysis reactions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A modelling study of aromatic soot precursors formation in laminar methane and ethene flames

A relatively short kinetic mechanism (93 species and 729 reactions) was developed to predict the formation of poly-aromatic hydrocarbons (PAH) and their growth of up to five aromatic rings in methane and ethane-fueled flames. The model is based on the C{sub 0}-C{sub 2} chemistry with recent well-established chemical kinetic data. Reaction paths for mostly stable and well studied PAH molecules were delineated and the reaction rate constants for PAH growth were collected. These were obtained by analysing the data reported in the literature during the last 30 years, or by using the estimates and optimisations of experimentally measured concentration profiles for small and PAH molecules. These profiles were collected by 12 independent work groups in laminar premixed CH{sub 4} and C{sub 2}H{sub 4} flames under atmospheric pressure or in shock tube experiments under elevated pressure. The simulated flame speeds, temporal profiles of small and large aromatics and also soot particles volume fraction data are in good agreement with the experimental data received for different temperatures, mixing ratios and diluents. The extensive analysis of PAH reaction steps showed that the main reaction routes can be conditionally divided into ''low temperature'' reaction routes, dominating at T < 1550 K, and ''high temperature'' reaction routes, which contribute mostly to PAH formation at T > 1550 K. The presented mechanism can be used as the basis for further extensions or reductions applied in kinetic schemes involving PAH and soot production in practical fuel combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lean methane premixed laminar flames doped by components of diesel fuel II: n-propylcyclohexane

For a better understanding of the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with n-propylcyclohexane has been investigated. The inlet gases contained 7.1% (molar) methane, 36.8% oxygen, and 0.81% n-propylcyclohexane (C{sub 9}H{sub 18}), corresponding to an equivalence ratio of 0.68 and a C{sub 9}H{sub 18}/CH{sub 4} ratio of 11.4%. The flame has been stabilized on a burner at a pressure of 6.7 kPa (50 Torr) using argon as diluent, with a gas velocity at the burner of 49.2 cm/s at 333 K. Quantified species included the usual methane C{sub 0}-C{sub 2} combustion products, but also 17 C{sub 3}-C{sub 5} hydrocarbons, seven C{sub 1}-C{sub 3} oxygenated compounds, and only four cyclic C{sub 6+} compounds, namely benzene, 1,3-cyclohexadiene, cyclohexene, and methylenecyclohexane. A new mechanism for the oxidation of n-propylcyclohexane has been proposed. It allows the proper simulation of profiles of most of the products measured in flames, as well as the satisfactory reproduction of experimental results obtained in a jet-stirred reactor. The main reaction pathways of consumption of n-propylcyclohexane have been derived from rate-of-production analysis. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large Eddy simulation of the Sandia Flame series (D-F) using the Eulerian stochastic field method

Three turbulent piloted methane jet flames with increasing levels of local extinction (Sandia Flames D-F) have been computed using Large Eddy simulation. The smallest unresolved scales of the flow, in which combustion occurs, are represented using the filtered probability density function method where the corresponding evolution equation is solved directly. A dynamic model for the sub-grid stresses together with a simple gradient diffusion approximation for the scalar fluxes is applied in conjunction with the linear mean square estimation closure for sub-filter scale mixing. An augmented reduced mechanism (ARM) derived from the full GRI 3.0 mechanism is incorporated to describe the chemical reaction. The results demonstrate the ability of the method in capturing quantitatively finite rate effects such as extinction and re-ignition in turbulent flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of gas compression on flame acceleration in channels with obstacles

The role of gas compressibility in flame acceleration in channels with obstacles is studied analytically. The theory is consistent with the mechanism of extremely fast flame acceleration in obstructed channels obtained recently by Bychkov et al. [Bychkov et al., Phys. Rev. Lett. 101 (2008) 164501]. The present theory accounts for small but finite gas compressibility through expansion for small initial Mach number up to the first-order terms. It is demonstrated that flame-generated compression waves moderate the acceleration process noticeably, and that, for finite but small gas compression, the theory is in good quantitative agreement with numerical simulations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of autoignition in a lifted methane/air flame using an unsteady flamelet/progress variable model

An unsteady flamelet/progress variable (UFPV) model has been developed for the prediction of autoignition in turbulent lifted flames. The model is a consistent extension to the steady flamelet/progress variable (SFPV) approach, and employs an unsteady flamelet formulation to describe the transient evolution of all thermochemical quantities during the flame ignition process. In this UFPV model, all thermochemical quantities are parameterized by mixture fraction, reaction progress parameter, and stoichiometric scalar dissipation rate, eliminating the explicit dependence on a flamelet time scale. An a priori study is performed to analyze critical modeling assumptions that are associated with the population of the flamelet state space. For application to LES, the UFPV model is combined with a presumed PDF closure to account for subgrid contributions of mixture fraction and reaction progress variable. The model was applied in LES of a lifted methane/air flame. Additional calculations were performed to quantify the interaction between turbulence and chemistry a posteriori. Simulation results obtained from these calculations are compared with experimental data. Compared to the SFPV results, the unsteady flamelet/progress variable model captures the autoignition process, and good agreement with measurements is obtained for mixture fraction, temperature, and species mass fractions. From the analysis of scatter data and mixture fraction-conditional results it is shown that the turbulence/chemistry interaction delays the ignition process towards lower values of scalar dissipation rate, and a significantly larger region in the flamelet state space is occupied during the ignition process. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of platinum stagnation surface on the lean extinction limits of premixed methane/air flames at moderate surface temperatures

A stagnation flow reactor was used to study the effects of platinum on the lean flammability limits of atmospheric pressure premixed methane/air flames at moderate stagnation surface temperatures. Experimental and computational methods were used to quantify the equivalence ratio at the lean extinction limit ({phi}{sub ext}) and the corresponding stagnation surface temperature (T{sub s}). A range of flow rates (57-90 cm/s) and corresponding strain rates were considered. The results indicate that the gas-phase methane/air flames are sufficiently strong relative to the heterogeneous chemistry for T{sub s} conditions less than 750 K that the platinum does not affect {phi}{sub ext}. The computational results are in good agreement with the experimentally observed trends and further indicate that higher reactant flow rates (>139 cm/s) and levels of dilution (>{proportional_to}10% N{sub 2}) are required to weaken the gas-phase flame sufficiently for surface reaction to play a positive role on extending the lean flammability limits. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental investigation of characteristics of a diffusion flame established over liquid ethanol surface under opposed air flow

A preliminary study of the shape and the extinction characteristics of a diffusion flame established over a circular liquid fuel surface under the influence of an opposed air flow, is presented. Renewable liquid fuel such as ethanol is employed. A simple heterogeneous combustion setup, which consists of a cylindrical tube containing ethanol located at the bottom, is exposed to an opposed air flow from a coaxial circular pipe of same size located at the top at a fixed separation distance. Axial and radial extents of flame for different air flow rates are qualitatively analyzed. Burning rates of ethanol for different separation distances and air flow rates are recorded. For a fixed separation distance, at a particular air flow rate the flame extinction takes place. Extinction air flow rates and corresponding strain rates for different separation distances are presented. (author)

09 BIOMASS FUELS↗

Dynamics of hydrogen–ammonia–natural gas lean-premixed high-pressure flames

The influence of fuel composition on self-excited combustion instabilities in a high-pressure combustor operated with ammonia, hydrogen, and natural gas fuels is characterized with high-frequency pressure measurements and imaging of the flame structure. A micromix multi-stage injector with 19 elements is used to introduce the fuel blend premixed with heated air into an optically accessible combustor operated at ~1.1 MPa. As hydrogen is substituted for natural gas, longitudinal thermoacoustic instabilities are observed in the combustor with pressure fluctuation amplitudes as large as 8% of the mean chamber value. In the absence of natural gas, limit-cycle instability magnitude is largely insensitive to ammonia addition. However, fuel compositions with > 20% natural gas result in positive correlation between instability amplitude and ammonia concentration. Spatial distribution of heat release in the combustor evaluated from OH* chemiluminescence imaging reveals axial growth in the regions of heat release fluctuation as hydrogen decreases, thus correlating flame length to instability amplitude. Distinct transitions from the first harmonic of the fundamental longitudinal acoustic mode (~1100 Hz) to the fundamental mode (~550 Hz) are observed with root mean square pressure fluctuations exceeding 7% of the mean chamber value. Here, these cases correspond to hydrogen mole fractions ≤ 50%. Analysis of the phase relationship between pressure fluctuations upstream and downstream of the flame zone indicates acoustic coupling of the injector as a key contributor to instability growth.

03 NATURAL GAS↗

Variation of the pressure limits of flame propagation with tube diameter for propane-air mixtures

An investigation was made of the variation of the pressure limits of flame propagation with tube diameter for quiescent propane with tube diameter for quiescent propane-air mixtures. Pressure limits were measured in glass tubes of six different inside diameters, with a precise apparatus. Critical diameters for flame propagation were calculated and the effect of pressure was determined. The critical diameters depended on the pressure to the -0.97 power for stoichiometric mixtures. The pressure dependence decreased with decreasing propane concentration. Critical diameters were related to quenching distance, flame speeds, and minimum ignition energy.

TEST APPARATUS - FLAME PROPOGATION - LFPL↗

Asymptotic Analysis of Premixed N-alkane Cool Flame Propagation

A simplified chemical-kinetic cool-flame mechanism for n-alkanes developed recently is applied to premixed laminar cool-flame deflagrations. The present contribution derives the structure of the associated freely propagating cool premixed flame controlled by the low-temperature chemistry and develops formulas for calculating the corresponding laminar burning velocity. Application of activation-energy asymptotics reveals finite-rate chemistry without heat release occurring throughout the preheat zone and leakage of both fuel and oxygen through the thin heat-release zone, there being zones of consumption of an intermediate species on each side of the heat-release zone, thicker than that zone but still thin compared with the preheat-zone thickness. Predicted laminar burning velocities are compared with recently reported measurements for n-dodecane, performed in a newly deigned high-pressure ignition apparatus, resulting in reasonable agreement.

Cool flames↗

Asymptotic Analysis of Premixed N-alkane Cool Flame Propagation

A simplified chemical-kinetic cool-flame mechanism for n-alkanes developed recently is applied to premixed laminar cool-flame deflagrations. The present contribution derives the structure of the associated freely propagating cool premixed flame controlled by the low-temperature chemistry and develops formulas for calculating the corresponding laminar burning velocity. Application of activation-energy asymptotics reveals finite-rate chemistry without heat release occurring throughout the preheat zone and leakage of both fuel and oxygen through the thin heat-release zone, there being zones of consumption of an intermediate species on each side of the heat-release zone, thicker than that zone but still thin compared with the preheat-zone thickness. Predicted laminar burning velocities are compared with recently reported measurements for n-dodecane, performed in a newly deigned high-pressure ignition apparatus, resulting in reasonable agreement.

cool flames↗

Comparison of submodels for conditional velocity and scalar dissipation in CMC simulation of piloted jet and bluff-body flames

No meaningful difference is observed between the predictions with the conditional velocity modeled by linear scaling and gradient diffusion assumption for the test flames under consideration. The AMC and Girimaji's model for CSDR show similar results, while the pdf integration method results in an asymmetric profile with some deviation from the other two. The difference tends to decrease as mixing proceeds, to result in a lower level of scalar dissipation at downstream locations. Reasonable agreement is achieved with measured scalar dissipation rates at different axial locations for the Sandia Flame D, while direct comparison is difficult due to radially averaged pdfs and no measured scalar dissipation rates being available for the Sydney bluff-body flame.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rotational coherent anti-Stokes Raman spectroscopy (CARS) applied to thermometry in high-pressure hydrocarbon flames

Dual-broadband rotational coherent anti-Stokes Raman spectroscopy (DB-RCARS) has been investigated for thermometry under high-pressure and high-temperature conditions, in the product gas of fuel-lean hydrocarbon flames up to 1 MPa. Initial calibration measurements made in nitrogen, oxygen, and air, at pressures up to 1.55 MPa and temperatures up to 1800 K, showed good agreement between experimental and theoretical spectra. In the high-pressure flames, high-quality single-shot spectra were recorded in which nitrogen lines dominated, and peaks from CO{sub 2} and O{sub 2} were also visible. A spectral model including the species N{sub 2}, CO{sub 2}, and O{sub 2}, as well as the best available Raman linewidth models for flame thermometry, were used to evaluate the experimental spectra. Experimental problems as well as considerations related to the spectral evaluation are discussed. This work demonstrates the significant potential of DB-RCARS thermometry for applications in high-pressure and high-temperature environments. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition and hydrocarbon growth processes for hexadienes in nonpremixed flames

Alkadienes are formed during the decomposition of alkanes and play a key role in the formation of aromatics due to their degree of unsaturation. The experiments in this paper examined the decomposition and hydrocarbon growth mechanisms of a wide range of hexadiene isomers in soot-forming nonpremixed flames. Specifically, C3 to C12 hydrocarbon concentrations were measured on the centerlines of atmospheric-pressure methane/air coflowing nonpremixed flames doped with 2000 ppm of 1,3-, 1,4-, 1,5-, and 2,4-hexadiene and 2-methyl-1,3-, 3-methyl-1,3-, 2-methyl-1,4-, 3-methyl-1,4-pentadiene, and 2,3-dimethyl-1,3-butadiene. The hexadiene decomposition rates and hydrocarbon product concentrations showed that the primary decomposition mechanism was unimolecular fission of C-C single bonds, whose fission produced allyl and other resonantly stabilized products. The one isomer that does not contain any of these bonds, 2,4-hexadiene, isomerized by a six-center mechanism to 1,3-hexadiene. These decomposition pathways differ from those that have been observed previously for propadiene and 1,3-butadiene, and these differences affect aromatic hydrocarbon formation. 1,5-Hexadiene and 2,3-dimethyl-1,3-butadiene produced significantly more C{sub 3}H{sub 4} and C{sub 4}H{sub 4} than the other isomers, but less benzene, which suggests that benzene formation pathways other than the conventional C3 + C3 and C4 + C2 pathways were important in most of the hexadiene-doped flames. The most likely additional mechanism is cyclization of highly unsaturated C5 decomposition products, followed by methyl addition to cyclopentadienyl radicals. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An experimental and kinetic modeling study of premixed NH{sub 3}/CH{sub 4}/O{sub 2}/Ar flames at low pressure

An experimental and modeling study of 11 premixed NH{sub 3}/CH{sub 4}/O{sub 2}/Ar flames at low pressure (4.0 kPa) with the same equivalence ratio of 1.0 is reported. Combustion intermediates and products are identified using tunable synchrotron vacuum ultraviolet (VUV) photoionization and molecular-beam mass spectrometry. Mole fraction profiles of the flame species including reactants, intermediates and products are determined by scanning burner position at some selected photon energies near ionization thresholds. Temperature profiles are measured by a Pt/Pt-13%Rh thermocouple. A comprehensive kinetic mechanism has been proposed. On the basis of the new observations, some intermediates are introduced. The flames with different mole ratios (R) of NH{sub 3}/CH{sub 4} (R0.0, R0.1, R0.5, R0.9 and R1.0) are modeled using an updated detailed reaction mechanism for oxidation of CH{sub 4}/NH{sub 3} mixtures. With R increasing, the reaction zone is widened, and the mole fractions of H{sub 2}O, NO and N{sub 2} increase while those of H{sub 2}, CO, CO{sub 2} and NO{sub 2} have reverse tendencies. The structural features by the modeling results are in good agreement with experimental measurements. Sensitivity and flow rate analyses have been performed to determine the main reaction pathways of CH{sub 4} and NH{sub 3} oxidation and their mutual interaction. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗