Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy - Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Use of Encapsulated Zinc Particles in a Eutectic Chloride Salt to Enhance Thermal Energy Storage Capacity for Concentrated Solar Power

Concentrated Solar Power (CSP) is considered as a viable large-scale renewable energy source to produce electricity. However, current costs to produce electricity from CSP are not cost competitive as compared to the traditional energy generation technologies based on fossil fuels and nuclear. It is envisioned that development of high efficiency and high heat capacity thermal storage fluids will increase system efficiency, reduce structural storage volume, and hence, contribute to reducing costs. Particularly, with respect to CSP, current high temperature energy storage fluids, such as molten salts, are relatively limited in terms of their thermal energy storage capacity and thermal conductivity. The current work explores possibility of boosting the thermal storage capacity of molten salts through latent heat of added phase change materials. We studied the advantage Of adding coated Zn micron-sized particles to alkali chloride salt eutectic for enhanced thermal energy storage. Zinc particles (0.6 mu m and 5 mu m) obtained from commercial source were coated with an organo-phosphorus shell to improve chemical stability and to prevent individual particles from coalescing with one another during melt/freeze cycles. Thermal cycling tests (200 melt/freeze cycles) showed that coated Zn particles have good thermal stability and are chemically inert to alkali chloride salt eutectic in both N-2 and in air atmospheres. Elemental mapping of the cross-sectional view of coated Zn particles from the composite after thermal cycles showed no signs of oxidation, agglomeration or other type of particle degradation. The measured enhancement in volumetric thermal storage capacity of the composite with just similar to 10 vol% of coated Zn particles over the base chloride salt eutectic varies from 15% to 34% depending on cycling temperature range (Delta T = 50 degrees C -100 degrees C. (C) 2015 Elsevier Ltd. All rights reserved.

encapsulation↗

Measuring Relative Energies of Ligand Binding Conformations on Nanocluster Surfaces with Temperature-Dependent FTIR Spectroscopy

We present a method to measure relative energies between binding conformations of carboxylate ligands on InP magic-sized clusters in solution. Using Markov chain Monte Carlo global fitting analysis on temperature-dependent vibrational spectra of cluster-bound ligands, we observe significantly different relative energies between various bidentate and monodentate binding motifs. Relative to the monodentate motif, the chelating conformation is 0.7 ± 0.3 kcal/mol more stable and the syn–syn bridging conformation is 1.1 ± 0.5 kcal/mol more stable, but the syn–anti bridging conformation exhibits no significant difference. Our results demonstrate that the relative energy between monodentate-bound carboxylates and unbound carboxylic acids is 4.52 ± 0.05 kcal/mol, or 1582 ± 19 cm –1 , nearly identical to the carboxylate asymmetric stretching frequency. Here, we suggest that the ligand vibrational energy may play a key role in ligand dissociation by compensating for energy differences between bound and dissociated ligand states. This approach gives important experimental insights into ligand binding and can inform future nanocrystal surface engineering.

Conformation↗

Intrinsic Layer-Dependent Surface Energy and Exfoliation Energy of van der Waals Materials

Stacking and twisting 2D van der Waals (vdW) layers have become versatile platforms to tune the electron correlation. These platforms rely on exfoliating vdW materials down to a single vdW layer and a few vdW layers. We calculate the intrinsic layer-dependent surface and exfoliation energies of typical vdW materials such as graphite, h-BN, black P, MX 2 (M = Mo or W; X = S, Se, or Te), MX (M = Ga or In; X = S, Se, or Te), Bi 2 Te 3 , and MnBi 2 Te 4 using density functional theory. For exchange-correlation functionals with explicit vdW interaction, a single vdW layer always has the smallest surface energy, giving a surface energy reduction when compared to that of thicker vdW layers. Furthermore, the magnitude of this surface energy reduction quickly decreases with an increase in the number of atomic layers inside the single vdW layer for different vdW materials. Such atomic-layer dependence in surface energy reduction helps explain the different effectiveness of exfoliation for different vdW materials down to a single vdW layer.

Anode materials↗

Calorimetric Energies and Chemical Potentials of Metal Atoms in Catalytic Nanoparticles on Oxide and Carbon Supports: Improved Size Dependencies and Adhesion Energies

The chemical potential of metal atoms, μM, in supported metal nanoparticles is an important descriptor related to both the catalytic activity and the stability of the nanoparticles. Here, we derive an expression relating μM to the radius of the particle’s contact area with the support and the adhesion energy at the metal/support interface (E adh ) that assumes the particles have the shape of spherical caps but of arbitrary contact angle with the support (θ c ) and includes an empirical correction for the increase in metal surface energy and adhesion energy with decreasing radius of curvature. We then show that, at any assumed contact angle, we can simultaneously fit previously reported measurements of both calorimetric μ M (from heats of metal vapor adsorption during nanoparticle growth by vapor deposition) versus metal coverage data and the He + low-energy ion scattering (LEIS) intensities for the metal and/or support versus metal coverage (using our recently developed spherical cap model for quantitative LEIS intensities), to determine the particle size versus coverage and E adh . Only one choice of contact angle gives a pair of values for contact angle and E adh , which is consistent with the Young–Dupré equation for the equilibrium shape of a spherical particle. At this equilibrium shape, we then applied this spherical cap model (SCM) to reanalyze microcalorimetric metal chemical potentials and LEIS signals versus coverage data for nine metal/support combinations that were previously analyzed by assuming that the particles had the shape of hemispherical caps, i.e., with a contact angle of 90°. We show that this revised approach gives close agreement with the calorimetric and LEIS data; the best-fit contact angles vary from 64 to 84°, correcting the earlier assumption of 90°. Furthermore, these results provide significant accuracy improvements in particle size versus coverage, metal chemical potential versus size and coverage, metal/support adhesion energies and contact angles for Cu, Ag and Au on CeO 2 (111), Ni on MgO(100), Ag on Fe 3 O 4 (111) and TiO 2 (100), and Ag, Ni and Pd on Ni-supported graphene. This revised approach is much more broadly applicable than the earlier hemispherical cap model (HCM).

99 GENERAL AND MISCELLANEOUS↗

Free Energy Perturbation Hamiltonian Replica-Exchange Molecular Dynamics (FEP\H-REMD) for absolute ligand binding free energy calculations.

Free Energy Perturbation with Replica Exchange Molecular Dynamics (FEP/REMD) offers a powerful strategy to improve the convergence of free energy computations. In particular, it has been shown previously that a FEP/REMD scheme allowing random moves within an extended replica ensemble of thermodynamic coupling parameters '{lambda}' can improve the statistical convergence in calculations of absolute binding free energy of ligands to proteins [J. Chem. Theory Comput. 2009, 5, 2583]. In the present study, FEP/REMD is extended and combined with an accelerated MD simulations method based on Hamiltonian replica-exchange MD (H-REMD) to overcome the additional problems arising from the existence of kinetically trapped conformations within the protein receptor. In the combined strategy, each system with a given thermodynamic coupling factor {lambda} in the extended ensemble is further coupled with a set of replicas evolving on a biased energy surface with boosting potentials used to accelerate the interconversion among different rotameric states of the side chains in the neighborhood of the binding site. Exchanges are allowed to occur alternatively along the axes corresponding to the thermodynamic coupling parameter {lambda} and the boosting potential, in an extended dual array of coupled {lambda}- and H-REMD simulations. The method is implemented on the basis of new extensions to the REPDSTR module of the biomolecular simulation program CHARMM. As an illustrative example, the absolute binding free energy of p-xylene to the nonpolar cavity of the L99A mutant of the T4 lysozyme was calculated. The tests demonstrate that the dual {lambda}-REMD and H-REMD simulation scheme greatly accelerates the configurational sampling of the rotameric states of the side chains around the binding pocket, thereby improving the convergence of the FEP computations.

59 BASIC BIOLOGICAL SCIENCES↗

Density-based Energy Decomposition Analysis for Intermolecular Interactions with Variationally Determined Intermediate State Energies

The first purely density-based energy decomposition analysis (EDA) for intermolecular binding is developed within the density functional theory. The most important feature of this scheme is to variationally determine the frozen density energy, based on a constrained search formalism and implemented with the Wu-Yang algorithm [Q. Wu and W. Yang, J. Chem. Phys. 118, 2498 (2003) ]. This variational process dispenses with the Heitler-London antisymmetrization of wave functions used in most previous methods and calculates the electrostatic and Pauli repulsion energies together without any distortion of the frozen density, an important fact that enables a clean separation of these two terms from the relaxation (i.e., polarization and charge transfer) terms. The new EDA also employs the constrained density functional theory approach [Q. Wu and T. Van Voorhis, Phys. Rev. A 72, 24502 (2005)] to separate out charge transfer effects. Because the charge transfer energy is based on the density flow in real space, it has a small basis set dependence. Applications of this decomposition to hydrogen bonding in the water dimer and the formamide dimer show that the frozen density energy dominates the binding in these systems, consistent with the noncovalent nature of the interactions. A more detailed examination reveals how the interplay of electrostatics and the Pauli repulsion determines the distance and angular dependence of these hydrogen bonds.

08 HYDROGEN↗

Suppression of Divergence of Low Energy Ion Beams by Space Charge Neutralization with Low Energy Electrons Emitted from Field Emitter Arrays

Suppression of divergence of low energy neon ion beam was experimentally demonstrated by neutralizing the space charge of ion beam with low energy electrons emitted from silicon field emitter arrays (Si-FEAs). Treatment of the FEAs with trifluoromethane plasma realized surface carbonization which was efficient to elongate the lifetime of the FEA and to improve the electron energy distribution. Together with the improvement of the performance of Si-FEA, we have developed a novel electron deceleration system to produce low energy electrons. A low energy neon ion beam was produced and the beam property was investigated with and without the electron supply from surface carbonized Si-FEA (Si:C-FEA). As a result, the divergence of the neon ion beam was largely suppressed with presence of the electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Energy Loss of Li and C Ions with MeV Energies in the Polycarbonate and Polypropylene

Stopping power and straggling of Li ions and C ions at mean energy 3.8-5.4 MeV and 5.6-6.9 MeV, respectively, in polycarbonate (PC) and at mean energy 3.7-5.2 MeV and 6.8-8.0 MeV in polypropylene (PP) foils have been measured using ion beams from a Tandetron 4130 MC accelerator. The ions scattered from a thin, primary gold target were registered by a surface barrier detector partially covered with a thin foil of the investigated polymer. The stopping power was determined from the energy difference between the signals from the ions directly backscattered from the Au layer and the ions backscattered and slowed down in the foil. The foil thickness was determined by the weighing procedure. The experimentally determined stopping powers were compared with those calculated with the SRIM 2010 code. The measured stopping powers are in good agreement for Li and C in PC, the differences being within 0.1-1.6% for Li and 0.2-2.1% for C. For Li and C in PP, the stopping powers are lower than the calculated ones, the differences being within 0.5-2.8% for Li and 3.6-6.1% for C. The energy straggling was determined from the width of the RBS signals. The experimentally determined energy straggling was found to fluctuate around the values calculated according to Bohr theory.

36 MATERIALS SCIENCE↗

Energy transfer and energy level decay processes in Tm{sup 3+}-doped tellurite glass

The primary excited state decay and energy transfer processes in singly Tm{sup 3+}-doped TeO{sub 2}:ZnO:Bi{sub 2}O{sub 3}:GeO{sub 2} (TZBG) glass relating to the {sup 3}F{sub 4}{yields}{sup 3}H{sub 6}{approx}1.85 {mu}m laser transition have been investigated in detail using time-resolved fluorescence spectroscopy. Selective laser excitation of the {sup 3}H{sub 4} manifold at 794 nm, the {sup 3}H{sub 5} manifold at 1220 nm, and {sup 3}F{sub 4} manifold at 1760 nm has established that the {sup 3}H{sub 5} manifold is entirely quenched by multiphonon relaxation in tellurite glass. The luminescence from the {sup 3}H{sub 4} manifold with an emission peak at 1465 nm suffers strong suppression due to cross relaxation that populates the {sup 3}F{sub 4} level with a near quadratic dependence on the Tm{sup 3+} concentration. The {sup 3}F{sub 4} lifetime becomes longer as the Tm{sup 3+} concentration increases due to energy migration and decreases to 2.92 ms when [Tm{sup 3+}] = 4 mol. % as a result of quasi-resonant energy transfer to free OH{sup -} radicals present in the glass at concentrations between 1 x 10{sup 18} cm{sup -3} and 2 x 10{sup 18} cm{sup -3}. Judd-Ofelt theory in conjunction with absorption measurements were used to obtain the radiative lifetimes and branching ratios of the energy levels located below 25 000 cm{sup -1}. The spectroscopic parameters, the cross relaxation and Tm{sup 3+}({sup 3}F{sub 4}) {yields} OH{sup -} energy transfer rates were used in a numerical model for laser transitions emitting at 2335 nm and 1865 nm.

36 MATERIALS SCIENCE↗

Fast ignition: Dependence of the ignition energy on source and target parameters for particle-in-cell-modelled energy and angular distributions of the fast electrons

The energy and angular distributions of the fast electrons predicted by particle-in-cell (PIC) simulations differ from those historically assumed in ignition designs of the fast ignition scheme. Using a particular 3D PIC calculation, we show how the ignition energy varies as a function of source-fuel distance, source size, and density of the pre-compressed fuel. The large divergence of the electron beam implies that the ignition energy scales with density more weakly than the ρ{sup −2} scaling for an idealized beam [S. Atzeni, Phys. Plasmas 6, 3316 (1999)], for any realistic source that is at some distance from the dense deuterium-tritium fuel. Due to the strong dependence of ignition energy with source-fuel distance, the use of magnetic or electric fields seems essential for the purpose of decreasing the ignition energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Thomson-type mass and energy spectrometer for characterizing ion energy distributions in a coaxial plasma gun operating in a gas-puff mode

Measurements of ion energy distribution are performed in the accelerated plasma of a coaxial electromagnetic plasma gun operating in a gas-puff mode at relatively low discharge energy (900 J) and discharge potential (4 kV). The measurements are made using a Thomson-type mass and energy spectrometer with a gated microchannel plate and phosphor screen as the ion sensor. The parabolic ion trajectories are captured from the sensor screen with an intensified charge-coupled detector camera. The spectrometer was designed and calibrated using the Geant4 toolkit, accounting for the effects on the ion trajectories of spatial non-uniformities in the spectrometer magnetic and electric fields. Results for hydrogen gas puffs indicate the existence of a class of accelerated protons with energies well above the coaxial discharge potential (up to 24 keV). The Thomson analyzer confirms the presence of impurities of copper and iron, also of relatively high energies, which are likely erosion or sputter products from plasma-electrode interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Double-sided electron energy analyzer for measurement of non-Maxwellian electron energy distributions

Here, a double-sided electron energy analyzer is developed for studies of magnetic reconnection. It can measure electron energy distribution functions along two directions opposite to each other at the same time. Each side is composed of a floating reference grid, an energy selector grid, and a collector plate. The voltage of the selector grid is swept from –40 to 0 V with respect to the reference grid with a frequency of 1 MHz. This fast sweeping is required to resolve sub-Alfvénic changes in plasma quantities of the Magnetic Reconnection Experiment, where the typical Alfvénic time is a few microseconds. The reliability of the energy analyzer is checked in Maxwellian plasmas away from the reconnection region. In this case, the electron temperature computed from the electron energy distribution function agrees with measurements of a reference triple Langmuir probe. When it is located near the reconnection region, the temperatures of the tail electron population from both sides, facing into the electron flow and facing away from it, exceed the bulk electron temperature measured by the Langmuir probe by a factor of about 2.

47 OTHER INSTRUMENTATION↗

ENERGY SPECTRUM AND CHEMICAL COMPOSITION OF ULTRAHIGH ENERGY COSMIC RAYS FROM SEMI-RELATIVISTIC HYPERNOVAE

It has been suggested that hypernova remnants, with a substantial amount of energy in semi-relativistic ejecta, can accelerate intermediate mass or heavy nuclei to ultrahigh energies and provide a sufficient amount of energy in cosmic rays to account for the observed flux. We here calculate the expected energy spectrum and chemical composition of ultrahigh energy cosmic rays from such semi-relativistic hypernovae. With a chemical composition equal to that of the hypernova ejecta and a flat or hard spectrum for cosmic rays at the sources, the spectrum and composition of the propagated cosmic rays observed at the Earth can be compatible with the measurements by the Pierre Auger Observatory.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron and photon energy calibration with the ATLAS detector using 2015–2016 LHC proton-proton collision data

This paper presents the electron and photon energy calibration obtained with the ATLAS detector using about 36 fb –1 of LHC proton-proton collision data recorded at √s = 13 TeV in 2015 and 2016. The different calibration steps applied to the data and the optimization of the reconstruction of electron and photon energies are discussed. The absolute energy scale is set using a large sample of Z boson decays into electron-positron pairs. The systematic uncertainty in the energy scale calibration varies between 0.03% to 0.2% in most of the detector acceptance for electrons with transverse momentum close to 45 GeV . For electrons with transverse momentum of 10 GeV the typical uncertainty is 0.3% to 0.8% and it varies between 0.25% and 1% for photons with transverse momentum around 60 GeV . Validations of the energy calibration with J/ψ → e + e – decays and radiative Z boson decays are also presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nuclear symmetry energy and proton-rich reactions at intermediate energies

Based on an isospin-dependent Boltzmann-Uehling-Uhlenbeck transport model, effects of high-density behavior of nuclear symmetry energy in the proton-rich reaction {sup 22}Si+{sup 22}Si at a beam energy of 400 MeV/nucleon are studied. It is found that the symmetry energy affects {pi}{sup +} production more than {pi}{sup -}. More interestingly, compared to neutron-rich reactions, for {pi}{sup -}/{pi}{sup +} and dense matter's N/Z ratios, effects of symmetry energy in the proton-rich reaction show contrary behaviors. The practical experiment by using the proton-rich reaction {sup 22}Si+{sup 40}Ca to study nuclear symmetry energy is also provided.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis on the Influence of an Energy Storage System and its Impact to the Grid for a Wave Energy Converter

Reducing power fluctuations is essential for controlling the integration impacts of wave energy converter (WEC) plants in both distribution and transmission grids, and in stand-alone isolated power systems. This paper presents an analysis on the cost of and how a battery storage system can be used to further reduce the variation of power generated from the WEC due to the fluctuating nature of waves and its impact to the grid. The electrical power output from WEC-Sim simulations for the six sea states used in the Wave Energy Prize was analyzed to compute the peak power and power time history. The results were used to evaluate the battery storage capacity that is needed for a WEC system to provide reasonable power flow to the grid and estimate its cost based on the latest cost information for battery technologies published by the U.S. Energy Information Administration. Finally, a preliminary grid integration analysis was performed to demonstrate how WEC-generated power would contribute to a small island electricity system. As shown in the study, the instantaneous peak power is the primary cost driver for the battery storage and the power take-off system, and reducing the power fluctuations is essential for reducing the overall levelized cost of energy (LCOE). The power flow variation from WECs can be significantly reduced using battery storage without adding significant overall system costs, and the implementation of battery storage is essential for grid integration applications. There may also be additional opportunities to further investigate energy storage technologies that are specific to WEC applications to reduce these costs even further.

16 TIDAL AND WAVE POWER↗