Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Anomalous elastic softening in ferroelectric hafnia under pressure

his study employs first-principles density-functional theory (DFT) calculations to explore the elastic and mechanical properties of ferroelectric hafnia (HfO 2 ) in its polar orthorhombic 𝑃⁢𝑐⁢𝑎⁢2 1 phase under varying hydrostatic pressure conditions up to 30 GPa. Utilizing a plane-wave basis set and Perdew-Burke-Ernzerhof generalized-gradient approximation for solids in our DFT calculations, we investigate both pure and yttrium-substituted HfO 2 . Our findings reveal an anomalous reduction in the 𝐶 33 component of the elastic tensor with increasing pressure, which becomes significant above 15 GPa and signals a potential pressure-driven structural phase transition at higher pressure. The analysis of atomic displacements under pressure sheds light on the unusual mechanical behavior and phase stability of this material. Additionally, we observe a transition from an indirect band gap to a direct band gap with increasing pressure, which could have significant implications for optical applications. Here, the effects of yttrium substitution on the mechanical and electronic properties are further examined, revealing that yttrium substitution softens the elastic response of this material and reduces the electronic band gap. These results enhance our understanding of elastic and mechanical responses of ferroelectric hafnia and its potential for applications in microelectronics, piezoelectric devices, and nonvolatile ferroelectric random-access memories. Further experimental validation is recommended to confirm our predictions and explore the practical implications of the observed phase transitions and electronic behavior of the ferroelectric hafnia under high-pressure conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of water on the mechanical properties of silica glass using molecular dynamics

Understanding the effects of water on the mechanical properties of silica glass is important for many applications of silicate glasses. In this study, the effects of water on both elastic and plastic properties of pure silica glass are investigated. The introduction of molecular water leads to an increase of Young's modulus of silica glass at low water content, while hydroxyl exhibits an opposite effect. Although hydroxyl groups decrease both strength and fracture toughness of the glass via destructing the silica network connectivity, molecular water undermines these properties by effectively driving the silica network to a “strained” configuration in absence of external stress. The water effect can be characterized in terms of the change of Si-O bond length and Si-O-Si bond angle. The plateau in the stress-strain curves of silica with the existence of molecular water in compact tension is associated with the Si-O bond breaking followed by formation of silanol groups. Furthermore, the introduction of molecular water lowers the critical tensile stress where the plateau occurs.

36 MATERIALS SCIENCE↗

Dynamic Mechanical Analysis Characterization of Glovebox Gloves

As part of the characterization of various glovebox glove material from four vendors, the permeability of gas through each type as a function of temperature was determined and a discontinuity in the permeability with temperature was revealed. A series of tests to determine the viscoelastic properties of the glove materials as a function of temperature using Dynamic Mechanical Analysis (DMA) was initiated. The glass transition temperature and the elastic and viscoelastic properties as a function of temperature up to maximum use temperature were determined for each glove material. The glass transition temperatures of the gloves were ‐60°C for butyl, ‐30°C for polyurethane, ‐16°C Hypalon®, ‐ 16°C for Viton®, and ‐24°C for polyurethane‐Hypalon®. The glass transition was too complex for the butyl‐Hypalon® and butyl‐Viton® composite gloves to be characterized by a single glass transition temperature. All of the glass transition temperatures exceed the vendor projected use temperatures.

36 MATERIALS SCIENCE↗

Structural and elastic anisotropy of crystals at high pressures and temperatures from quantum mechanical methods: The case of Mg{sub 2}SiO{sub 4} forsterite

We report accurate ab initio theoretical predictions of the elastic, seismic, and structural anisotropy of the orthorhombic Mg{sub 2}SiO{sub 4} forsterite crystal at high pressures (up to 20 GPa) and temperatures (up to its melting point, 2163 K), which constitute earth’s upper mantle conditions. Single-crystal elastic stiffness constants are evaluated up to 20 GPa and their first- and second-order pressure derivatives reported. Christoffel’s equation is solved at several pressures: directional seismic wave velocities and related properties (azimuthal and polarization seismic anisotropies) discussed. Thermal structural and average elastic properties, as computed within the quasi-harmonic approximation of the lattice potential, are predicted at high pressures and temperatures: directional thermal expansion coefficients, first- and second-order pressure derivatives of the isothermal bulk modulus, and P-V-T equation-of-state. The effect on computed properties of five different functionals, belonging to three different classes of approximations, of the density functional theory is explicitly investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-Principle Calculations on the Structural, Mechanical, and Electronic Properties of Mn{sub 2}RuSi and Mn{sub 2}RuGe Under Pressure

The second- and third-order elastic constants of the new Inverse Heusler compounds Mn{sub 2}RuZ (Z = Si, Ge) are determined from the first-principle calculations combined with homogeneous deformation methods. In terms of the second- and third- order elastic constants, the effective second-order elastic constants of Mn{sub 2}RuZ (Z = Si, Ge) are also presented. Besides, the pressure dependence of the brittle/ductile properties, elastic anisotropy factor, Young’s modulus, and Debye temperature is further investigated. It is found that both Mn{sub 2}RuSi and Mn{sub 2}RuGe display ductile nature at ground state and Mn{sub 2}RuGe has better ductility than Mn{sub 2}RuSi under different pressures. This phenomenon is improved by the Young’s modulus. Finally, the density of states of Mn{sub 2}RuZ (Z = Si, Ge) under different pressures is also calculated in order to reveal the origin of the effect of pressure on the the ductility of Mn{sub 2}RuZ (Z = Si, Ge).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic metamaterial beam with remotely tunable stiffness

We demonstrate a dynamically tunable elastic metamaterial, which employs remote magnetic force to adjust its vibration absorption properties. The 1D metamaterial is constructed from a flat aluminum beam milled with a linear array of cylindrical holes. The beam is backed by a thin elastic membrane, on which thin disk-shaped permanent magnets are mounted. When excited by a shaker, the beam motion is tracked by a Laser Doppler Vibrometer, which conducts point by point scanning of the vibrating element. Elastic waves are unable to propagate through the beam when the driving frequency excites the first elastic bending mode in the unit cell. At these frequencies, the effective mass density of the unit cell becomes negative, which induces an exponentially decaying evanescent wave. Due to the non-linear elastic properties of the membrane, the effective stiffness of the unit cell can be tuned with an external magnetic force from nearby solenoids. Measurements of the linear and cubic static stiffness terms of the membrane are in excellent agreement with experimental measurements of the bandgap shift as a function of the applied force. In this implementation, bandgap shifts by as much as 40% can be achieved with ∼30 mN of applied magnetic force. This structure has potential for extension in 2D and 3D, providing a general approach for building dynamically tunable elastic metamaterials for applications in lensing and guiding elastic waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thin Films and Inflatable Applications in Exploration Habitat Structures

NASA's vision to return to the Moon and then extend human exploration to Mars will benefit from human habitat technology development using new and creative applications of polymer materials and concepts. Thin Film and Inflatable (TFVI) materials are particularly interesting for exploration applications due to their light weight and low volume. Whereas TF/I materials can be launched and carried from Earth to multiple and distant exploration sites without the constraints of upmass limitations, eventually, with recycling and reclamation efforts, these materials may be developed using in-situ resources. These materials can be useful for fabricating, patching and repairing vehicles, replacement parts and even habitat structures, as well as for developing stand-alone habitat structure technologies and for nested and integrated applications. TF/Is can also be ideal environmental containment vessels within lunar or Martian regolith walls or as liners inside caves or raw regolith exterior structures for the provisions of atmosphere containment, debris protection and cleanliness. Further, TFOs can be specialized and matured for various and diverse applications. The desired range of applications will require materials specification for such properties as transparency, elasticity, thermal conductivity, mechanical strength, heat capacity, chemical resistance, and permeability. This paper will discuss Marshall Space Flight Center's plans to analyze and prioritize TF/I materials properties and classifications and to develop applications for these highly desirable materials in human habitat construction projects on the Moon and Mars.

Frazier, Donald O.↗

Mechanical Properties of LaRC(tm) SI Polymer for a Range of Molecular Weights

Mechanical testing of an advanced polyimide resin (LaRC(tm)-SI) with known variations in molecular weight was performed over a range of temperatures below the glass transition temperature. Elastic and inelastic properties were characterized as a function of molecular weight and test temperature. It was shown that notched tensile strength is a strong function of both temperature and molecular weight, whereas stiffness is only a strong function of temperature. The combined analysis of calculated yield stress and notched tensile strength indicated that low molecular weight materials tended to fail in a brittle manner, whereas high molecular weight materials exhibited ductile failure. The microphotographs of the failure surfaces also supported these findings.

Whitley, Karen S.↗

Convergence of Legendre Expansion of Doppler-Broadened Double Differential Elastic Scattering Cross Section

Convergence properties of Legendre expansion of a Doppler-broadened double-differential elastic neutron scattering cross section of {sup 238}U near the 6.67 eV resonance at temperature 10{sup 3} K are studied. A variance of Legendre expansion from a reference Monte Carlo computation is used as a measure of convergence and is computed for as many as 15 terms in the Legendre expansion. When the outgoing energy equals the incoming energy, it is found that the Legendre expansion converges very slowly. Therefore, a supplementary method of computing many higher-order terms is suggested and employed for this special case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recrystallization Behavior and Super-Elasticity of a Metastable β-Type Ti-21Nb-7Mo-4Sn Alloy During Cold Rolling and Annealing

Based on the d-electron alloy design theory, a new metastable β-type titanium alloy for biomedical applications, Ti-21Nb-7Mo-4Sn (wt.%) was designed in this article. This theory predicted this alloy was a metastable single β-type titanium alloy with low elastic modulus at room temperature, and the β-phase transition (β to α″) would be easy to occur during the cold rolling. The evolution of microstructure and mechanical properties of this alloy during cold rolling plus annealing were investigated by means of x-ray diffraction, optical microscope, transmission electron microscope and mechanical properties test. The results indicate that only β phase can be identified in this alloy before cold rolling, while a large amount of lath martensite (α″ phase) appears after cold rolling due to stress-induced martensitic transformation, which is in accordance with the prediction of the d-electron alloy design theory. The recrystallization nucleation occurs preferentially in the martensite lath region during the subsequent annealing process, and this region forms a large number of nano-crystals and microcrystals, showing that cold rolling plus annealing can become a new process for refining grains. Compared with casting and cold rolling samples, the annealing materials at 923 K for 10 min have excellent comprehensive mechanical properties with lower elastic modulus (58 GPa) and higher elastic recovery rate (35.39%).

36 MATERIALS SCIENCE↗

Thermal stress analysis of ceramic gas-path seal components for aircraft turbines

Stress and temperature distributions were evaluated numerically for a blade-tip seal system proposed for gas turbine applications. The seal consists of an abradable ceramic layer on metallic backing with intermediate layers between the ceramic layer and metal substrate. The most severe stresses in the seal, as far as failure is concerned, are tensile stresses at the top of the ceramic layer and shear and normal stresses at the layer interfaces. All these stresses reach their maximum values during the deceleration phase of a test engine cycle. A parametric study was carried out to evaluate the influence of various design parameters on these critical stress values. The influences of material properties and geometric parameters of the ceramic, intermediate, and backing layers were investigated. After the parametric study was completed, a seal system was designed which incorporated materials with beneficial elastic and thermal properties in each layer of the seal. An analysis of the proposed seal design shows an appreciable decrease in the magnitude of the maximum critical stresses over those obtained with earlier configurations.

Kennedy, F. E.↗

Assessing exchange-correlation functionals for elasticity and thermodynamics of α - ZrW 2 O 8 : A density functional perturbation theory study

Elastic and thermodynamic properties of negative thermal expansion (NTE) αα-ZrW2O8 have been calculated using PBEsol and PBE exchange-correlation functionals within the framework of density functional perturbation theory (DFPT). Measured elastic constants are reproduced within ~2% with PBEsol and 6% with PBE. The thermal evolution of the Grüneisen parameter computed within the quasi-harmonic approximation exhibits negative values below the Debye temperature, consistent with observation. The standard molar heat capacity is predicted to be C $O\atop{P}$=192.2 and 193.8 J mol -1 K -1 with PBEsol and PBE, respectively. These results suggest superior accuracy of DFPT/PBEsol for studying the lattice dynamics, elasticity and thermodynamics of NTE materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tensile and creep rupture properties of (16) uncoated and (2) coated engineering alloys at elevated temperatures

Sixteen test materials were supplied by NASA-Lewis Research Center as wrought bar or cast remelt stock. The cast remelt stock was cast into test blanks with two such materials being also evaluated after Jocoat coating was applied. Mechanical properties evaluated included tensile, modulus of elasticity, Poisson's Ratio, creep properties and creep rupture strength. Tests were conducted at temperatures applicable to the service temperature of the various alloys. This range extended from room temperature to 1000 C.

Fritz, L. J.↗

Property evaluation and microstructure characterization of the A3-3 matrix graphite - 18440

Spherical fuel elements with TRISO fuel will be used in the pebble-bed high temperature gas-cooled nuclear reactor. The fuel will be located within the center region of the elements, and will be suspended in, and surrounded by a shell of matrix graphite. The matrix graphite provides structural support to the fuel, prevents fuel damage, and allows for heat transfer from the fuel to the coolant. The raw materials for the matrix graphite, type A3-3, includes 64 wt% natural flake graphite, 16 wt% artificial graphite and 20 wt% phenol resin binder. After the final heat treatment, the resulting A3-3 matrix is composed of 71 wt% natural graphite, 18 wt% artificial graphite, and 11 wt% phenol resin-derived coke carbon. The microstructure of A3-3 matrix graphite has direct influences on the material properties, which are crucial to maintaining the integrity and safety of the fuel elements. This presentation will discuss microstructure features, such as lattice, and crystal parameters, porosity, pore size and distribution, and anisotropy. The multiple physical, mechanical and thermal properties of this material, including: elastic modulus, mechanical strength, and oxidation property will also be presented. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nanowires and Nanostructures That Grow Like Polymer Molecules

Unique properties (e.g., rubber elasticity, viscoelasticity, folding, reptation) determine the utility of polymer molecules and derive from their morphology (i.e., one-dimensional connectivity and large aspect ratios) and flexibility. Crystals do not display similar properties because they have smaller aspect ratios, they are rigid, and they are often too large and heavy to be colloidally stable. We argue, with the support of recent experimental studies, that these limitations are not fundamental and that they might be overcome by growth processes that mimic polymerization. Furthermore, we (i) discuss the similarities between crystallization and polymerization, (ii) critically review the existing experimental evidence of polymer-like growth kinetic and behavior in crystals and nanostructures, and (iii) propose heuristic guidelines for the synthesis of “polymer-like” crystals and assemblies. Understanding these anisotropic materials at the boundary between molecules and solids will determine whether we can confer the unique properties of polymer molecules to crystals, expanding them with topology, dynamics, and information and not just tuning them with size.

36 MATERIALS SCIENCE↗

Effect of plasticity on the experimental characterization of the creep property of a cement paste: Spherical vs. conical microindentation

Microindentation is today a powerful tool for rapidly characterizing the elastic modulus and the logarithmic basic creep of a cement paste. However, a theoretical work proved that a microindentation test with a sharp indenter shape involves stress concentration and delayed plasticity which can cause an overestimation of the estimated creep property. This work aims at experimentally investigating the effect of the shape indenter on the identification of the visco-elastic property of a cement paste by microindentation. First, several microindentation grids were carried out on a cement paste with both a Berkovich indenter and a spherical indenter at different penetration depths or load levels for load control (creep) tests or displacement control (relaxation) tests, respectively. As for a visco-elastic material the duality principle between creep and relaxation holds, a numerical method was developed for predicting the relaxation response from the assumed logarithmic creep compliance. The present results show that only spherical microindentation satisfy the duality principle for which creep and relaxation response can be predicted by a unique logarithmic creep compliance function. Finally, spherical microindentation creep tests at low load as well as spherical microindentation relaxation tests provide a greater indentation modulus M and contact creep modulus C{sub v} as likely less affected by possible plasticity effects.

36 MATERIALS SCIENCE↗

An in-situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels

For multiphase advanced high-strength steels, the different mechanical behavior of constituent phases may lead to a non-uniform partitioning of stresses among different phases. In addition, the grain-orientation-dependent elastic/plastic anisotropy in each phase may cause the grain-to-grain interactions, which further modify further the microscopic load partitioning. In the current work, the micromechanical behavior of high-strength steels with multiple phases was characterized by using the in-situ high-energy X-ray diffraction (HEXRD) technique. For the investigated materials, the {200} lattice strains of the constituent phases (the ferrite, bainite, and martensite) with similar crystal structures were determined through separating their overlapped diffraction peaks and, then, examining the respective changes of peak positions during deformation. Based on those experimental data, the anisotropic elastic and plastic properties of the steels were simulated using a Self-Consistent (SC) model for predicting the grain-to-grain and phase-to-phase interactions. The constitutive laws for describing the elastic and plastic behavior of each constituent phase were directly obtained through comparing the predicted lattice- strain distributions with the measured ones. The transmission-electron-microscopy (TEM) observations of the microstructure developments of microstructures also verified the partitioning of plastic strains among different phases. The present investigations provide a good fundamental understanding of the micromechanical behavior, with an emphasis on the stress partitioning of soft and hard phases, and different work-hardening rates, of the studied steels during tensile loading.

36 MATERIALS SCIENCE↗

Influence of volume magnetostriction on the thermodynamic properties of Ni-Mn-Ga shape memory alloys

In the present article, the thermodynamic properties of Ni-Mn-Ga ferromagnetic shape memory alloys exhibiting the martensitic transformations (MTs) above and below Curie temperature are compared. It is shown that when MT goes below Curie temperature, the elastic and thermal properties of alloy noticeably depend on magnetization value due to spontaneous volume magnetostriction. However, the separation of magnetic parts from the basic characteristics of MT is a difficult task, because the volume magnetostriction does not qualitatively change the transformational behaviour of alloy. This problem is solved for several Ni-Mn-Ga alloys by means of the quantitative theoretical analysis of experimental data obtained in the course of stress-strain tests. For each alloy, the entropy change and the transformation heat evolved in the course of MT are evaluated, first, from the results of stress-strain tests and, second, from differential scanning calorimetry data. For all alloys, a quantitative agreement between the values obtained in two different ways is observed. It is shown that the magnetic part of transformation heat exceeds the non-magnetic one for the Ni-Mn-Ga alloys undergoing MTs in ferromagnetic state, while the elevated values of transformation heat measured for the alloys undergoing MTs in paramagnetic state are caused by large MT strains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗