SEARCH · Engineering Papers

Results for “Digitalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

NASA NTRS1990

A novel demodulator/detector for digital and analog signals on LMR channels

The design, implementation, and performance of an all-digital demodulator/detector suitable for differentially encoded phase-shift keying (DPSK), continuous-phase frequency-shift keying (CPFSK), frequency-shift keying (FSK), and analog FM are discussed. In this demodulator/detector, two detectors, one noncoherent and another differentially coherent, operate simultaneously to provide data detection and automatic frequency control (AFC). Test results indicate that the system provides improved performance over the conventional analog quadrature detector for two-period raised-cosine (2RC) CPFSK modulation in additive white Gaussian noise (AWGN) and Rayleigh fading channels. Being all-digital, the demodulator/detector is well suited for integrated circuit implementation. In addition, the system performs as well as the analog quadrature detector for analog FM voice transmissions, thereby maintaining full compatibility with analog land mobile radio (LMR) transmissions.

Saulnier, Gary J.↗

NASA NTRS1990

Simultaneous multivelocity component laser Doppler velocimetry using one digital frequency processor

Digital frequency processing used in conjunction with optical frequency shifting is an ideal way to achieve simultaneous multivelocity component measurements in laser Doppler velocimetry. This becomes obvious once realized that multivelocity component information at different frequency offsets can be obtained directly from the composite frequency spectrum of a single-channel digital frequency processor. The approach has numerous advantages over the very popular approach of using a different laser wavelength, photodetector, and signal processor for each velocity component.

Johnson, D. A.↗

NASA NTRS1990

The derivation of a sub-canopy digital terrain model of a flooded forest using synthetic aperture radar

Synthetic aperture radar data from the Shuttle Imaging Radar-B Mission were combined with the tide surface information to create a digital terrain model for a 70-km by 40-km section of the Mouths of the Ganges forests in southern Bangladesh. The dominance of the interaction phenomenon (canopy to surface or surface to canopy reflection) in flooded forests was exploited to create sub-canopy flood boundary maps for two different tide times. The boundary maps were digitally combined in x, y, z space with tide elevation models created from tide gauge data gridding the survey site and used as input to interpolation routines to create a terrain model. The end product represents a significant step in our ability to characterize the topography and hydrology of wetland ecosystems. The model derived here can be used for simulating tidal flow and nutrient transport from the forest to the marine habitat.

Imhoff, Marc Lee↗

NASA NTRS1990

Development and testing of methodology for evaluating the performance of multi-input/multi-output digital control systems

The development of a controller performance evaluation (CPE) methodology for multiinput/multioutput digital control systems is described. The equations used to obtain the open-loop plant, controller transfer matrices, and return-difference matrices are given. Results of applying the CPE methodology to evaluate MIMO digital flutter suppression systems being tested on an active flexible wing wind-tunnel model are presented to demonstrate the CPE capability.

Polotzky, Anthony S.↗

NASA NTRS1989

A coherent digital demodulator for multiple signal formats and widely varying data rates

The Tracking and Data Relay Satellite System (TDRSS) uses four ground station demodulators for K-band signals with data rates from 1 kb/s to 300 Mb/s. The author discusses the feasibility of replacing these demodulators with a single digital demodulator that may be reconfigured by altering stored parameters to accommodate all signal formats and data rates. This implementation will reduce total ground station cost and facilitate automation of ground station operation. Analysis of system performance concentrates on the carrier tracking loop. Analytic and simulation results relate system performance to parameter values and signal format as data rate and power vary independently on the In-phase and quadrature channels. It is demonstrated that a single digital demodulator can support TDRSS-compatible signals at data rates conservatively extending from 1K symbols/s to 10M symbols/s, using off-the-shelf hardware with 6 or more bits of accuracy.

Mcguffin, Bruce F.↗

NASA NTRS1991

Digital Signal Combiner For Receiving-Antenna Feed Array

Proposed digital system combines digitized baseband samples of signals received by array of feeds in large Cassegrainian paraboloidal-dish antenna. Signals received by subantennas in focal-plane array of large dish antenna combined by system compensating in real time for distortions of wave fronts caused by mechanical distortions of antenna. Signal-combining system combines baseband output signals of receiver front ends according to complex weighting parameters estimated from signals themselves. Intended to compensate in real time for degradation of signal-to-noise ratio by vibrational, gravitational, and wind-induced deformations of antenna structure.

Vilnrotter, Victor A.↗

NASA NTRS1991

Improved Remapping Processor For Digital Imagery

Proposed digital image processor improved version of Programmable Remapper, which performs geometric and radiometric transformations on digital images. Features include overlapping and variably sized preimages. Overcomes some of limitations of image-warping circuit boards implementing only those geometric tranformations expressible in terms of polynomials of limited order. Also overcomes limitations of existing Programmable Remapper and made to perform transformations at video rate.

Fisher, Timothy E.↗

NASA NTRS1991

Digital Image Velocimetry

Proposed technique for production of velocity maps from sequences of photographic video images of flows seeded with small particles. In digital image velocimetry, image analyzed by digital Fourier tranformation. Process free of noise, more precise, and consumes less time. Eliminates need to process photographs, indicates directions of velocity vectors unambiguously, and offers increased dynamic ranges. Because all processing performed electronically, eventually capable of mapping flow-velocity fields in real time.

Cho, Y. C.↗

NASA NTRS1990

Time concurrency/phase-time synchronization in digital communications networks

Digital communications networks have the intrinsic capability of time synchronization which makes it possible for networks to supply time signals to some applications and services. A practical estimation method for the time concurrency on terrestrial networks is presented. By using this method, time concurrency capability of the Nippon Telegraph and Telephone Corporation (NTT) digital communications network is estimated to be better than 300 ns rms at an advanced level, and 20 ns rms at final level.

Kihara, Masami↗

NASA NTRS1989

Digital redesign of the control system for the Robotics Research Corporation model K-1607 robot

The analog control system for positioning each link of the Robotics Research Corporation Model K-1607 robot manipulator was redesigned for computer control. In order to accomplish the redesign, a linearized model of the dynamic behavior of the robot was developed. The parameters of the model were determined by examination of the input-output data collected in closed-loop operation of the analog control system. The robot manipulator possesses seven degrees of freedom in its motion. The analog control system installed by the manufacturer of the robot attempts to control the positioning of each link without feedback from other links. Constraints on the design of a digital control system include: the robot cannot be disassembled for measurement of parameters; the digital control system must not include filtering operations if possible, because of lack of computer capability; and criteria of goodness of control system performing is lacking. The resulting design employs sampled-data position and velocity feedback. The criteria of the design permits the control system gain margin and phase margin, measured at the same frequencies, to be the same as that provided by the analog control system.

Carroll, Robert L.↗

NASA NTRS1991

Design and status of the RF-digitizer integrated circuit

An integrated circuit currently under development samples a bandpass-limited signal at a radio frequency in quadrature and then performs a simple sum-and-dump operation in order to filter and lower the rate of the samples. Downconversion to baseband is carried out by the sampling step itself through the aliasing effect of an appropriately selected subharmonic sampling frequency. Two complete RF digitizer circuits with these functions will be implemented with analog and digital elements on one GaAs substrate. An input signal, with a carrier frequency as high as 8 GHz, can be sampled at a rate as high as 600 Msamples/sec for each quadrature component. The initial version of the chip will sign-sample (1-bit) the input RF signal. The chip will contain a synthesizer to generate a sample frequency that is a selectable integer multiple of an input reference frequency. In addition to the usual advantages of compactness and reliability associated with integrated circuits, the single chip will replace several steps required by standard analog downconversion. Furthermore, when a very high initial sample rate is selected, the presampling analog filters can be given very large bandwidths, thereby greatly reducing phase and delay instabilities typically introduced by such filters, as well as phase and delay variation due to Doppler changes.

Rayhrer, B.↗

NASA NTRS1991

A new technique for enlargement and reconstruction of digital sensor imagery

A new image enlargement and reconstruction routine, the digital image enlarging balanced reconstruction algorithm (DIEBRA), is described. Using a highly modified form of 'balanced' two-dimensional polynomial interpolation, this program enlarges digital imagery, creating synthetic high spatial resolution images. Statistical analysis shows the DIEBRA-generated imagery to be significantly closer to true high spatial resolution imagery at all frequencies than imagery generated by a cubic convolutional reconstruction filter.

Rhea, W. Joseph↗

NASA NTRS1991

3-D CFD in a day - The laser digitizer project

The computation of airflow over complex configurations requires a complete description of the geometry. This can be obtained from CAD data, from blueprints, or from actual models. In any case, the time required is currently estimated at 4 to 6 months. It is proposed to shorten this time by a factor of 10 to 100 through the use of automated software, a fast, highly parallel computer and a three-dimensional laser digitizer. This device can provide (x,y,z) coordinates of surface points at rates exceeding 14,500/sec. Thus, it is possible to digitize an entire model in a few minutes. The accuracy of measurement on a flat white surface is better than 0.005 inches. Higher accuracy is available at higher cost. This work discusses the challenges which remain to be addressed. In particular, the surface point data need to be converted into a surface description, the surface description needs to be made into a surface grid, and the surface grid used to make a volume grid for the flow solver. Algorithms are kept in place or in mind for all of these problems. Integration of the more mature flow solution and visualization algorithms then allows generation of solution graphics directly from a wind tunnel model.

Merriam, Marshal↗

NASA NTRS1991

Analyzing remote sensing geobotanical trends in Quetico Provincial Park, Ontario, Canada, using digital elevation data

A 10 x 13-km area in Quetico Provincial Park, Canada has been studied using a digital elevation model to separate different drainage classes and to examine the influence of site factors and lithology on vegetation. Landsat Thematic Mapper data have been classified into six forest classes of varying deciduous-coniferous cover through nPDF, a procedure based on probability density functions. It is shown that forests growing on mafic lithologies are enriched in deciduous species, compared to those growing on granites. Of the forest classes found on mafics, the highest coniferous component was on north facing slopes, and the highest deciduous component on south facing slopes. Granites showed no substantial variation between site classes. The digital elevation derived site data is considered to be an important tool in geobotanical investigations.

Warner, Timothy A.↗

NASA NTRS1991

Doppler detection of decompression bubbles with computer assisted digitization of ultrasonic signals

The use of an inexpensive, commercially available audio digitizer in conjunction with a PC to digitize Doppler bubble signals for visual and electronic evaluation is reported. This device can be operated simultaneously with Doppler audio monitoring. Precordial and arterial Doppler recordings of gas bubbles were obtained from anesthetized dogs after intravascular infusion or following decompression. Additional evaluations were conducted on Doppler bubble recordings obtained from human decompression studies. The device can be used in real-time or for later signal analysis. Accompanying menu-driven software provides for numerous signal modification options and visual displays. This device can provide a simultaneous visual display of Doppler signals normally available only for audio evaluation.

Butler, B. D.↗

NASA NTRS1991

Digital Doppler measurement with spacecraft

Digital and analog phase-locked loop (PLL) receivers were operated in parallel, each tracking the residual carrier from a spacecraft. The PLL tracked the downlink carrier and measured its instantaneous phase. This information, combined with a knowledge of the uplink carrier and the transponder ratio, permitted the computation of a Doppler observable. In this way, two separate Doppler measurements were obtained for one observation window. The two receivers agreed on the magnitude of the Doppler effect to within 1 mHz. There was less jitter on the data from the digital receiver. This was due to its smaller noise bandwidth. The demonstration and its results are described.

Kinman, Peter W.↗

NASA NTRS1992

Detecting Latent Faults In Digital Flight Controls

Report discusses theory, conduct, and results of tests involving deliberate injection of low-level faults into digital flight-control system. Part of study of effectiveness of techniques for detection of and recovery from faults, based on statistical assessment of inputs and outputs of parts of control systems. Offers exceptional new capability to establish reliabilities of critical digital electronic systems in aircraft.

Mcgough, John↗

NASA NTRS1992

Digital Correlation In Laser-Speckle Velocimetry

Periodic recording helps to eliminate spurious results. Improved digital-correlation process extracts velocity field of two-dimensional flow from laser-speckle images of seed particles distributed sparsely in flow. Method which involves digital correlation of images recorded at unequal intervals, completely automated and has potential to be fastest yet.

Gilbert, John A.↗