Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Orbit and attitude determination results during launch support operations for SBS-5

Presented are orbit and attitude determination results from the launch of Satellite Business Systems (SBS)-5 satellite on September 8, 1988 by Arianespace. SBS-5 is a (HS-376) spin stabilized spacecraft. The launch vehicle injected the spacecraft into a low inclination transfer orbit. Apogee motor firing (AMF) attitude was achieved with trim maneuvers. An apogee kick motor placed the spacecraft into drift orbit. Postburn, reorientation and spindown maneuvers were performed during the next 25 hours. The spacecraft was on-station 19 days later. The orbit and attitude were determined by both an extended Kalman filter and a weighted least squares batch processor. Although the orbit inclination was low and the launch was near equinox, post-AMF analysis indicated an attitude declination error of 0.034 deg., resulting in a saving of 8.5 pounds of fuel. The AMF velocity error was 0.4 percent below nominal. The post-AMF drift rate was determined with the filter only 2.5 hours after motor firing. The filter was used to monitor and retarget the reorientation to orbit normal in real time.

Hartman, K. R.↗

Experimental determination of stator endwall heat transfer

Local Stanton numbers were experimentally determined for the endwall surface of a turbine vane possage. A six vane linear cascade having vanes with an axial chord of 13.81 cm was used. Resutls were obtained for Reynolds numbers based on inlet velocity and axial chord between 75,000 and 495,000. The test section was connected to a low pressure exhaust system. Ambient air was drawn into the test section, inlet velocity was controlled up to a maximum of 59.4 m/sec. The effect of the inlet boundary layer thickness on the endwall heat transfer was determined for a range of test section flow rates. The liquid crystal measurement technique was used to measure heat transfer. Endwall heat transfer was determined by applying electrical power to a foil heater attached to the cascade endwall. The temperature at which the liquid crystal exhibited a specific color was known from a calibration test. Lines showing this specific color were isotherms, and because of uniform heat generation they were also lines of nearly constant heat transfer. Endwall static pressures were measured, along with surveys of total pressure and flow angles at the inlet and exit of the cascade.

Boyle, Robert J.↗

Determinations of cloud liquid water in the tropics from the SSM/I

Upward-looking microwave radiometric observations were used to validate the SSM/I determinations, and also as a basis for the determination of new coefficients. Due to insufficiency of the initial four channel algorithm for cloud liquid water, the improved algorithm was derived from the CORRAD (the University of Massachusetts autocorrelation radiometer) measurements of cloud liquid water and the matching SSM/I brightness temperatures using the standard linear regression. The correlation coefficients for the possible four channel combinations, and subsequently the best and the worst combinations were determined.

Alishouse, John C.↗

Determining the properties of accretion-gap neutron stars

If neutron stars have radii as small as has been argued by some, observations of accretion-powered X-rays could verify the existence of innermost stable circular orbits (predicted by general relativity) around weakly magnetized neutron stars. This may be done by detecting X-ray emission from clumps of matter before and after they cross the gap (where matter cannot be supported by rotation) between the inner accretion disk and the stellar surface. Assuming the validity of general relativity, it would then be possible to determine the masses of such neutron stars independently of any knowledge of binary orbital parameters. If an accurate mass determination were already available through any of the methods conventionally used, the new mass determination method proposed here could then be used to quantitatively test strong field effects of gravitational theory.

Kluzniak, Wlodzimierz↗

Determination of the optical thickness and effective particle radius of clouds from reflected solar radiation measurements. I - Theory

A method is presented for determining the optical thickness and effective particle radius of stratiform cloud layers from reflected solar radiation measurements. A detailed study is presented which shows that the cloud optical thickness (tau c) and effective particle radius (r/e/) of water clouds can be determined solely from reflection function measurements at 0.75 micron and 2.16 microns, provided tau c is not less than 4 and r(e) is not less than 6 microns. For optically thin clouds, the retrieval becomes ambiguous, resulting in two possible solutions for the effective radius and optical thickness. Adding a third channel near 1.65 micron does not improve the situation noticeably, whereas the addition of a channel near 3.70 microns reduces the ambiguity in deriving the effective radius. The effective radius determined by the above procedure corresponds to the droplet radius at some optical depth within the cloud layer.

Nakajima, Teruyuki↗

Voyager 2 orbit determination at Neptune

In August 1989 the Voyager 2 spacecraft encountered Neptune and Triton. Precise knowledge of the trajectory of the spacecraft relative to the Neptunian system was essential to ensure successful observations during the flyby, and to perform trajectory control. Determination of the orbit of Voyager 2 with respect to the Neptunian system was accomplished by the use of radiometric Doppler, range, and VLBI observations of the spacecraft in combination with spacecraft-based optical observations of Neptune, Triton, Nereid, and the Voyager-discovered satellite 1989N1. These data types were used in a new version of the JPL Orbit Determination Program to determine the orbit of the spacecraft as well as Neptunian system ephemerides and dynamical parameters, resulting in accurate delivery of the spacecraft to targeted conditions at Neptune and Triton.

Lewis, G. D.↗

A determination of the radio-planetary frame tie and the DSN tracking station locations

The orientation of the reference frame of radio source catalogs relative to that of planetary ephemerides is uncertain by 30 mas (150 nrad). At this level of uncertainty this orientation offset, or 'frame tie', can be a major systematic error source for interplanetary spacecraft orbit determination. This work presents a method of determining the radio-planetary frame tie from a comparison of Very Long Baseline Interferometry (VLBI) and Lunar Laser Ranging (LLR) station coordinate and earth orientation parameter estimates. Preliminary results are presented which indicate that accuracies of 5 mas or better may be achieved with this method. An important by-product of this method of frame tie determination is a set of Deep Space Network (DSN) station locations with 10 cm per component accuracy. This station set is in a geocentric coordinate system with known orientation relative to the radio and planetary frames.

Finger, Mark H.↗

Evaluation of orbit determination using dual-TDRS tracking

This paper describes the results of a study to evaluate the orbit determinatioin of Tracking and Data Relay Satellite System (TDRSS) user spacecraft within the dual-Tracking and Data Relay Satellite (TDRS) environment. Dense TDRSS tracking of the Earth Radiation Budget Satellite (ERBS) was acquired for the period August 16 through 22, 1989. This tracking information was processed to evaluate the orbit determination consistency achieved using the Goddard Trajectory Determination System batch least-squares estimator. The effects of the use of the second operational relay spacecraft, of refinements in orbit determination models (geopotentials, polar motion, solid earth tidal gravitational perturbations, ionospheric refraction corrections), and of methods for providing relay spacecraft spacecraft position information were also studied.

Oza, D. H.↗

On three dimensional object recognition and pose-determination: An abstraction based approach

A method of computing reliable Gaussian and mean curvature sign-map descriptors from the polynomial approximation of surfaces was demonstrated. Such descriptors which are invariant under perspective variation are suitable for hypothesis generation. A means for determining the pose of constructed geometric forms whose algebraic surface descriptors are nonlinear in terms of their orienting parameters was developed. This was done by means of linear functions which are capable of approximating nonlinear forms and determining their parameters. It was shown that biquadratic surfaces are suitable companion linear forms for cylindrical approximation and parameter estimation. The estimates provided the initial parametric approximations necessary for a nonlinear regression stage to fine tune the estimates by fitting the actual nonlinear form to the data. A hypothesis-based split-merge algorithm for extraction and pose determination of cylinders and planes which merge smoothly into other surfaces was developed. It was shown that all split-merge algorithms are hypothesis-based. A finite-state algorithm for the extraction of the boundaries of run-length regions was developed. The computation takes advantage of the run list topology and boundary direction constraints implicit in the run-length encoding.

Quek, Kok How Francis↗

Remote object configuration/orientation determination

This invention relates to object detection and location systems and, more particularly, to a method for determining the configuration and location of an object with respect to an X, Y, X coordinate frame. In space applications in particular, there is a need to be able to passively determine the orientation of an object at a distance, for example, in the control of large, flexible space structures. At present, there is no available method or apparatus which will allow the operator to make such a determination. A similar problem and need exists in robotic application. It is the primary object of this invention to provide a system for remotely defining an object's configuration in a manner compatible with a computer's analytical capability.

Schumacher, Larry L.↗

Method and apparatus for determining return stroke polarity of distant lightning

A method is described for determining the return stroke polarity of distant lightning for distances beyond 600 km by detecting the electric field associated with a return stroke of distant lightning, and processing the electric field signal to determine the polarity of the slow tail of the VLF waveform signal associated with the detected electric field. The polarity of the return stroke of distant lightning is determined based upon the polarity of the slow tail portion of the waveform.

Blakeslee, Richard J.↗

Protein solubilities determined by a rapid technique and modification of that technique to a micro-method

A simple, rapid method for determination of protein solubilities has been developed which is based upon maximization of the free solution volume to be brought into equilibrium. The tetragonal lysozome solubility diagram has been determined from pH 4.0 to 5.2 (0.1 M sodium acetate), 2-7 percent NaCl, 3-25 C, and portions of the orthorhombic solubility diagram using this technique. Both tetragonal and orthorhombic solubilities were found to increase smoothly with decreasing salt concentration and increasing temperature; no retrograde solubilities were observed. Using column volumes of 75, 300, and 900 microliters, identical tetragonal lysozyme solubility diagrams were obtained. Chymotrypsinogen solubilities have also been determined using this apparatus, being retrograde over the temperature range tested. It is noted that the primary limiting factor in reducing the crystalline volume is the minimum solution sample size needed to accurately quantitate the protein.

Cacioppo, Elizabeth↗

Optical neural network system for pose determination of spinning satellites

An optical neural network architecture and algorithm based on a Hopfield optimization network are presented for multitarget tracking. This tracker utilizes a neuron for every possible target track, and a quadratic energy function of neural activities which is minimized using gradient descent neural evolution. The neural net tracker is demonstrated as part of a system for determining position and orientation (pose) of spinning satellites with respect to a robotic spacecraft. The input to the system is time sequence video from a single camera. Novelty detection and filtering are utilized to locate and segment novel regions from the input images. The neural net multitarget tracker determines the correspondences (or tracks) of the novel regions as a function of time, and hence the paths of object (satellite) parts. The path traced out by a given part or region is approximately elliptical in image space, and the position, shape and orientation of the ellipse are functions of the satellite geometry and its pose. Having a geometric model of the satellite, and the elliptical path of a part in image space, the three-dimensional pose of the satellite is determined. Digital simulation results using this algorithm are presented for various satellite poses and lighting conditions.

Lee, Andrew↗

The role of laser determined orbits in geodesy and geophysics

Some of the results of orbit analysis from the NASA SLR analysis group are presented. The earth's orientation was determined for 5-day intervals to 1.9 mas for the pole and 0.09 msec for length of day. The 3d center of mass station positions was determined to 33 mm over a period of 3 months, and geodesic rates of SLR tracking sites were determined to 5 mm/yr.

Kolenkiewicz, R.↗

A simplified method for determining the number of independent slip systems in crystals

A novel method for determining the number of independent slip systems for any family or a combination of families of slip systems is proposed, which is more direct than previous approaches. This technique makes it possible to easily determine, from the known operative slip systems, if the material is slip-system-deficient. The method also makes it possible to determine if twinning may contribute additional deformation modes.

Cotton, J. D.↗

Quaternion normalization in additive EKF for spacecraft attitude determination

This work introduces, examines, and compares several quaternion normalization algorithms, which are shown to be an effective stage in the application of the additive extended Kalman filter (EKF) to spacecraft attitude determination, which is based on vector measurements. Two new normalization schemes are introduced. They are compared with one another and with the known brute force normalization scheme, and their efficiency is examined. Simulated satellite data are used to demonstrate the performance of all three schemes. A fourth scheme is suggested for future research. Although the schemes were tested for spacecraft attitude determination, the conclusions are general and hold for attitude determination of any three dimensional body when based on vector measurements, and use an additive EKF for estimation, and the quaternion for specifying the attitude.

Bar-Itzhack, I. Y.↗

Determination of Rotordynamic Coefficients for Labyrinth Seals and Application to Rotordynamic Design Calculations

In today's rotordynamic calculations, the input parameters for a finite element analysis (FEA) determine very much the reliability of eigenvalue and eigenmode predictions. While modeling of an elastic structure by means of beam elements etc. is relatively straightforward to perform and the input data for journal bearings are usually known exactly enough, the determination of stiffness and damping for labyrinth seals is still the subject of many investigations. Therefore, the rotordynamic influence of labyrinths is often not included in FEA for rotating machinery because of a lack of computer programs to calculate these parameters. This circumstance can give rise to severe vibration problems especially for high performance turbines or compressors, resulting in remarkable economic losses. The forces generated in labyrinths can be described for small motions around the seal center with a linearized force-motion relationship. Several years ago, we started with the development of computer codes for the determination of rotordynamic seal coefficients. Our different approaches to evaluate the dynamic fluid forces generated by turbulent, compressible seal flow are introduced.

Weiser, P.↗

Orbit-determination performance of Doppler data for interplanetary cruise trajectories. Part 2: 8.4-GHz performance and data-weighting strategies

A consider error covariance analysis was performed in order to investigate the orbit-determination performance attainable using two-way (coherent) 8.4-GHz (X-band) Doppler data for two segments of the planned Mars Observer trajectory. The analysis includes the effects of the current level of calibration errors in tropospheric delay, ionospheric delay, and station locations, with particular emphasis placed on assessing the performance of several candidate elevation-dependent data-weighting functions. One weighting function was found that yields good performance for a variety of tracking geometries. This weighting function is simple and robust; it reduces the danger of error that might exist if an analyst had to select one of several different weighting functions that are highly sensitive to the exact choice of parameters and to the tracking geometry. Orbit-determination accuracy improvements that may be obtained through the use of calibration data derived from Global Positioning System (GPS) satellites also were investigated, and can be as much as a factor of three in some components of the spacecraft state vector. Assuming that both station-location errors and troposphere calibration errors are reduced simultaneously, the recommended data-weighting function need not be changed when GPS calibrations are incorporated in the orbit-determination process.

Ulvestad, J. S.↗