Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Characterization of a modified printed optical particle spectrometer for high-frequency and high-precision laboratory and field measurements

Abstract. The printed optical particle spectrometer (POPS) is a lightweight, low-cost instrument for measurements of aerosol number concentrations and size distributions. This work reports on modifications of the Handix Scientific commercial version of the POPS to facilitate its use in multi-instrument aerosol sampling systems. The flow system is modified by replacing the internal pump with a needle valve and a vacuum pump. The instrument is integrated into closed-flow systems by routing the sheath flow from filtered inlet air. A high-precision multichannel analyzer (MCA) card is added to sample the analog pulse signal. The MCA card is polled at 10 Hz frequency using an external data acquisition system and improves upon the count-rate limitation associated with the POPS internal data acquisition system. The times required to change the concentration between 90 % and 10 % and vice versa for a step change in concentration were measured to be 0.17 and 0.41 s at a flow rate of 5 cm3 s−1. This yields a sampling frequency of ∼ 1–2 Hz, below which the amplitude of measured fluctuations is captured with > 70 % efficiency. The modified POPS was integrated into the dual tandem differential mobility analyzer system to explore the coalescence of dimer particles. Results show that the pulse-height response increases upon dimer coalescence. The magnitude of the increase is broadly consistent with the change in light-scattering amplitude predicted by the T-matrix method. It is anticipated that this modified version of the POPS will extend the utilization of the technique for a range of field and laboratory applications.

54 ENVIRONMENTAL SCIENCES↗

Modeled soft X-ray solar irradiances

Solar soft X-rays have historically been inaccurately modeled in both relative variations and absolute magnitudes by empirical solar extreme ultraviolet (EUV) irradiance models. This is a result of the use of a limited number of rocket data sets which were primarily associated with the calibration of the AE-E satellite EUV data set. In this work, the EUV91 solar EUV irradiance model has been upgraded to improve the accuracy of the 3.0 to 5.0 nm relative irradiance variations. The absolute magnitude estimate of the flux in this wavelength range has also been revised upwards. The upgrade was accomplished by first digitizing the SOLRAD 11 satellite 4.4 to 6.0 nm measured energy flux data set, then extracting and extrapolating a derived 3.0 to 5.0 nm photon flux from these data, and finally by performing a correlation between these derived data and the daily and 81-day mean 10.7 cm radio flux emission using a multiple linear regression technique. A correlation coefficient of greater than 0.9 was obtained between the dependent and independent data sets. The derived and modeled 3.0 to 5.0 nm flux varies by more than an order of magnitude over a solar cycle, ranging from a flux below 1 x 10(exp 8) to a flux greater than 1 x 10(exp 9) photons per sq cm per sec. Solar rotational (27-day) variations in the flux magnitude are a factor of 2. The derived and modeled irradiance absolute values are an order of magnitude greater than previous values from rocket data sets related to the calibration of the AE-E satellite.

Tobiska, W. Kent↗

ATD-1 Avionics Phase 2: Post-Flight Data Analysis Report

This report aims to satisfy Air Traffic Management Technology Demonstration - 1 (ATD-1) Statement of Work (SOW) 3.6.19 and serves as the delivery mechanism for the analysis described in Annex C of the Flight Test Plan. The report describes the data collected and derived as well as the analysis methodology and associated results extracted from the data set collected during the ATD-1 Flight Test. All analyses described in the SOW were performed and are covered in this report except for the analysis of Final Approach Speed and its effect on performance. This analysis was de-prioritized and, at the time of this report, is not considered feasible in the schedule and costs remaining.

Scharl, Julien↗

Bringing Analysis Closer to Data: Developing a Visualization Tool for L2 Earth Science Satellite Data

Earth Science satellite missions provide a unique opportunity for scientists to visualize complex and multifaceted observations projected geospatially across maps of the Earth. While visualization tools can help scientists comprehend, analyze, and share data, visualizing Level-2 Earth Sciences data poses its own specific set of challenges. Since the geospatial information in Level-2 data files is stored as independent variables, the plotting process involves matching dimensional information from latitude and longitude with a desired variable. Variables are stored in different ways across various Earth Science data file formats, which complicates the process of extracting data and plotting variables from a given file without requiring extensive user input and prerequisite familiarity with the file type variable structure. In coordination with NASA’s Goddard Earth Sciences Data Information Services Center (GES DISC), the team developed a Level-2 Earth Science data visualization tool that aims to address some of the complexities associated with plotting Level-2 data. This tool offers command-line and user interface support for file and variable selection to accommodate varying use cases and degrees of user familiarity with the structure of a given file. The visualization tool is written in Python 3 and utilizes a modular approach to facilitate continued expansion and reuse. In addressing some common complications involved in plotting Level-2 Earth Sciences data, the tool aims to help to link the process of analysis more directly with data acquisition and visualization, bringing analysis closer to data across levels of processing.

Li, Angela W.↗

Including Chi-Nu 235 U PFNS Experimental Data into an ENDF/B-VIII.1 Release Candidate Evaluation

This report documents an evaluation of 235 U prompt fission neutron spectra (PFNS) that is a release candidate for the upcoming U.S. nuclear data library, ENDF/B-VIII.1. This evaluation differs from its predecessor, ENDF/B-VIII.0, mainly by the inclusion of 235 U PFNS measured by the Chi-Nu team of LANL and LLNL. This data set is the first one that covers the 235 U PFNS for continuous incident-neutron energies of 1⁻20 MeV and outgoing-neutron energies from 10 keV⁻10 MeV with high precision. Previous data sets were either measured in a limited energy range or with less precision. Hence, these new Chi-Nu data provide decisive information for the evaluation. The resulting evaluated data correspond well to the new experimental PFNS. The evaluated PFNS also produce average mean energies and 239 Pu/ 235 U PFNS in agreement with associated Chi-Nu data. If one uses the new evaluated data to predict the neutron multiplication factor, k eff , of selected ICSBEP critical assemblies, the differences of simulated values compared to those using ENDF/B-VIII.0 is modest (less than 55 pcm). This difference in k eff can be easily accommodated by changes in the 235 U average prompt fission neutron multiplicity that is currently being re-evaluated. In addition to that, the new PFNS predict on average 235 U LLNL pulsed-sphere neutron-leakage spectra better than ENDF/B-VIIII.0 PFNS.

235U↗

Condition Monitoring of Large-Scale Facilities

This document provides a summary of the research conducted for the NASA Ames Research Center under grant NAG2-1182 (Condition-Based Monitoring of Large-Scale Facilities). The information includes copies of view graphs presented at NASA Ames in the final Workshop (held during December of 1998), as well as a copy of a technical report provided to the COTR (Dr. Anne Patterson-Hine) subsequent to the workshop. The material describes the experimental design, collection of data, and analysis results associated with monitoring the health of large-scale facilities. In addition to this material, a copy of the Pennsylvania State University Applied Research Laboratory data fusion visual programming tool kit was also provided to NASA Ames researchers.

Hall, David L.↗

Cell prestress. I. Stiffness and prestress are closely associated in adherent contractile cells

The tensegrity hypothesis holds that the cytoskeleton is a structure whose shape is stabilized predominantly by the tensile stresses borne by filamentous structures. Accordingly, cell stiffness must increase in proportion with the level of the tensile stress, which is called the prestress. Here we have tested that prediction in adherent human airway smooth muscle (HASM) cells. Traction microscopy was used to measure the distribution of contractile stresses arising at the interface between each cell and its substrate; this distribution is called the traction field. Because the traction field must be balanced by tensile stresses within the cell body, the prestress could be computed. Cell stiffness (G) was measured by oscillatory magnetic twisting cytometry. As the contractile state of the cell was modulated with graded concentrations of relaxing or contracting agonists (isoproterenol or histamine, respectively), the mean prestress ((t)) ranged from 350 to 1,900 Pa. Over that range, cell stiffness increased linearly with the prestress: G (Pa) = 0.18(t) + 92. While this association does not necessarily preclude other interpretations, it is the hallmark of systems that secure shape stability mainly through the prestress. Regardless of mechanism, these data establish a strong association between stiffness of HASM cells and the level of tensile stress within the cytoskeleton.

NASA Discipline Cell Biology↗

Cosmic shear power spectra in practice

Cosmic shear is one of the most powerful probes of Dark Energy, targeted by several current and future galaxy surveys. Lensing shear, however, is only sampled at the positions of galaxies with measured shapes in the catalog, making its associated sky window function one of the most complicated amongst all projected cosmological probes of inhomogeneities, as well as giving rise to inhomogeneous noise. Partly for this reason, cosmic shear analyses have been mostly carried out in real-space, making use of correlation functions, as opposed to Fourier-space power spectra. Since the use of power spectra can yield complementary information and has numerical advantages over real-space pipelines, it is important to develop a complete formalism describing the standard unbiased power spectrum estimators as well as their associated uncertainties. Building on previous work, this paper contains a study of the main complications associated with estimating and interpreting shear power spectra, and presents fast and accurate methods to estimate two key quantities needed for their practical usage: the noise bias and the Gaussian covariance matrix, fully accounting for survey geometry, with some of these results also applicable to other cosmological probes. Here, we demonstrate the performance of these methods by applying them to the latest public data releases of the Hyper Suprime-Cam and the Dark Energy Survey collaborations, quantifying the presence of systematics in our measurements and the validity of the covariance matrix estimate. We make the resulting power spectra, covariance matrices, null tests and all associated data necessary for a full cosmological analysis publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

The Design and Evaluation of the Lighting Imaging Sensor Data Applications Display (LISDAD)

The design and evaluation of the Lightning Imaging Sensor Data Applications Display (LISDAD). The ultimate goal of the LISDAD system is to quantify the utility of total lightning information in short-term, severe-weather forecasting operations. To this end, scientists from NASA, NWS, and MIT organized an effort to study the relationship of lightning and severe-weather on a storm-by-storm, and even cell-by-cell basis for as many storms as possible near Melbourne, Florida. Melbourne was chosen as it offers a unique combination of high probability of severe weather and proximity to major relevant sensors - specifically: NASA's total lightning mapping system at Kennedy Space Center (the LDAR system at KSC); a NWS/NEXRAD radar (at Melbourne); and a prototype Integrated Terminal Weather System (ITWS, at Orlando), which obtains cloud-to-ground lightning Information from the National Lightning Detection Network (NLDN), and also uses NSSL's Severe Storm Algorithm (NSSL/SSAP) to obtain information about various storm-cell parameters. To assist in realizing this project's goal, an interactive, real-time data processing system (the LISDAD system) has been developed that supports both operational short-term weather forecasting and post facto severe-storm research. Suggestions have been drawn from the operational users (NWS/Melbourne) in the design of the data display and its salient behavior. The initial concept for the users Graphical Situation Display (GSD) was simply to overlay radar data with lightning data, but as the association between rapid upward trends in the total lightning rate and severe weather became evident, the display was significantly redesigned. The focus changed to support the display of time series of storm-parameter data and the automatic recognition of cells that display rapid changes in the total-lightning flash rate. The latter is calculated by grouping discrete LDAR radiation sources into lightning flashes using a time-space association algorithm. Specifically, the GSD presents the user with the Composite Maximum Reflectivity obtained from the NWS/NEXRAD. Superimposed upon this background image are placed small black circles indicating the locations of storm cells identified by the NSSL/SSA. The circles become cyan if lightning is detected within the storm-cell; if the cell has lightning rates indicative of a severe-storm, the circle turns red. This paper will: (1) review the design of LISDAD system; (2) present some examples of its data display; and shown results of the lightning based severe-weather prediction algorithm.

Boldi, B.↗

A design for a new catalog manager and associated file management for the Land Analysis System (LAS)

Due to the larger number of different types of files used in an image processing system, a mechanism for file management beyond the bounds of typical operating systems is necessary. The Transportable Applications Executive (TAE) Catalog Manager was written to meet this need. Land Analysis System (LAS) users at the EROS Data Center (EDC) encountered some problems in using the TAE catalog manager, including catalog corruption, networking difficulties, and lack of a reliable tape storage and retrieval capability. These problems, coupled with the complexity of the TAE catalog manager, led to the decision to design a new file management system for LAS, tailored to the needs of the EDC user community. This design effort, which addressed catalog management, label services, associated data management, and enhancements to LAS applications, is described. The new file management design will provide many benefits including improved system integration, increased flexibility, enhanced reliability, enhanced portability, improved performance, and improved maintainability.

Greenhagen, Cheryl↗

A Data-Driven Framework for Automated Detection of Aircraft-Generated Signals in Seismic Array Data Using Machine Learning

Abstract Ground motions associated with aircraft overflights can cover a significant portion of the seismic data collected by shallowly emplaced seismometers, such as new nodal and Distributed Acoustic Sensing systems. This article describes the first published framework for automated detection of aircraft on single channel and multichannel seismic data. The seismic data are converted to spectrograms in a sliding time window and classified as aircraft or nonaircraft in each window using a deep convolutional neural network trained with analyst-labeled data. A majority voting scheme is used to convert the output from the sequence of sliding time windows onto a decision time sequence for each channel and to combine the binary classifications on the decision time sequences across multiple channels. Precision, recall, and F-score are used to quantify the detection performance of the algorithm on nodal data using fourfold time-series cross validation. By applying our framework to data from the Sage Brush Flats nodal array in Southern California, we provide a benchmark performance and demonstrate the advantage of using an array of sensors.

Geochemistry & Geophysics↗

Predicting protein functions from redundancies in large-scale protein interaction networks

Interpreting data from large-scale protein interaction experiments has been a challenging task because of the widespread presence of random false positives. Here, we present a network-based statistical algorithm that overcomes this difficulty and allows us to derive functions of unannotated proteins from large-scale interaction data. Our algorithm uses the insight that if two proteins share significantly larger number of common interaction partners than random, they have close functional associations. Analysis of publicly available data from Saccharomyces cerevisiae reveals >2,800 reliable functional associations, 29% of which involve at least one unannotated protein. By further analyzing these associations, we derive tentative functions for 81 unannotated proteins with high certainty. Our method is not overly sensitive to the false positives present in the data. Even after adding 50% randomly generated interactions to the measured data set, we are able to recover almost all (approximately 89%) of the original associations.

Proteins/chemistry/metabolism↗

Finding, Organizing, and Preserving Legacy Nuclear Test Monitoring Data—Examples from the Livermore Nevada Network

A challenge for geophysical research is the relatively short time for which continuous digital data have been available. There are many events of research interest where much of the data were collected by analog or temporary digital means. These legacy data require special efforts to find, organize, and preserve for future research. Here, we focus on one type of legacy data, nuclear explosions, and associated events (e.g., collapses, aftershocks) of high interest for nuclear monitoring research and development. For nuclear tests conducted in Nevada, the Lawrence Livermore Nevada Network recorded valuable data on a variety of formats. In this article, we briefly review this network, and describe one set of data that previously was available via CD-ROM by request, and since 2018 has become available through Incorporated Research Institutions for Seismology as assembled dataset 18-001.

58 GEOSCIENCES↗

Community-Based Services that Facilitate Interoperability and Intercomparison of Precipitation Datasets from Multiple Sources

Over the past 12 years, large volumes of precipitation data have been generated from space-based observatories (e.g., TRMM), merging of data products (e.g., gridded 3B42), models (e.g., GMAO), climatologies (e.g., Chang SSM/I derived rain indices), field campaigns, and ground-based measuring stations. The science research, applications, and education communities have greatly benefited from the unrestricted availability of these data from the Goddard Earth Sciences Data and Information Services Center (GES DISC) and, in particular, the services tailored toward precipitation data access and usability. In addition, tools and services that are responsive to the expressed evolving needs of the precipitation data user communities have been developed at the Precipitation Data and Information Services Center (PDISC) (http://disc.gsfc.nasa.gov/precipitation or google NASA PDISC), located at the GES DISC, to provide users with quick data exploration and access capabilities. In recent years, data management and access services have become increasingly sophisticated, such that they now afford researchers, particularly those interested in multi-data set science analysis and/or data validation, the ability to homogenize data sets, in order to apply multi-variant, comparison, and evaluation functions. Included in these services is the ability to capture data quality and data provenance. These interoperability services can be directly applied to future data sets, such as those from the Global Precipitation Measurement (GPM) mission. This presentation describes the data sets and services at the PDISC that are currently used by precipitation science and applications researchers, and which will be enhanced in preparation for GPM and associated multi-sensor data research. Specifically, the GES-DISC Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni) will be illustrated. Giovanni enables scientific exploration of Earth science data without researchers having to perform the complicated data access and match-up processes. In addition, PDISC tool and service capabilities being adapted for GPM data will be described, including the Google-like Mirador data search and access engine; semantic technology to help manage large amounts of multi-sensor data and their relationships; data access through various Web services (e.g., OPeNDAP, GDS, WMS, WCS); conversion to various formats (e.g., netCDF, HDF, KML (for Google Earth)); visualization and analysis of Level 2 data profiles and maps; parameter and spatial subsetting; time and temporal aggregation; regridding; data version control and provenance; continuous archive verification; and expertise in data-related standards and interoperability. The goal of providing these services is to further the progress towards a common framework by which data analysis/validation can be more easily accomplished.

Liu, Zhong↗

Waterlevel, geochemical, and borehole data from Rifle, Colorado from 2006-2016

The files included in this data package provide site wide water level data, geochemical data, and borehole information associated with the Rifle site in Colorado during the Lawrence Berkeley National Lab (LBNL) led Integrated Field Research Challenge (IFRC) and Scientific Focus Area (SFA) research projects. The data informs hydrogeochemical interactions occurring in the watershed. The readme file contains detailed metadata for the files, including naming conventions, column headers, and data validation.The borehole information is provided in the file called rifle_boreholes.csv. It provides names and location for boreholes/wells at the Rifle. The waterlevel data is provided in the folder rifle_waterlevels. The geochemical data is provided in two folders: the rifle_floodplain_geochemistry folder has data which was collected from wells across the floodplain and a variety of offsite locations that contribute solutes to the floodplain given their upgradient locations. The rifle_plotC_geochemistry folder has data which was collected primarily in plot C, which was a focused study area in which a large number of groundwater manipulation / biostimulation experiments were conducted. While not all geochemical constituents are included for each well location and sampling date, they include anions, cations, trace metals, dissolved organic and inorganic carbon, stable isotopes of water and sulfur (as sulfate), and water quality parameters including pH, groundwater electrical conductivity (EC) and dissolved oxygen (DO). All files are in csv or txt format.

54 ENVIRONMENTAL SCIENCES↗

The partition of energy associated with tropical heat sources

Data sets derived from observations during the First GARP Global Experiment (FGGE) have permitted the study of the behavior of the tropical atmosphere to an extent not possible before. The present summary discusses characteristics of the tropical atmosphere which may be a result of tropical heating. It is shown that the meridional component of the divergent wind is of the same order of magnitude an he rotational meridional wind for the planetary tropical scales. Furthermore, the first and second internal modes dominate over most of the tropics, and it is shown that gravity and Kelvin codes are the main contributors to the total tropical divergence. Comparison with averaged station precipitation data and heating estimates obtained from Goddard Laboratory for Atmospheric Science (GLAS)/National Aeronautics and Space Administration (NASA) show good correspondence between areas with maximum internal mode energy and regions with pronounced latent heat release.

Silva-Dias, P. L.↗

Mobile Device Application for Monitoring Cyanobacteria Harmful Algal Blooms Using Sentinel-3 Satellite Ocean and Land Colour Instruments

Cyanobacterial harmful algal blooms (cyanoHAB) cause human and ecological health problems in lakes worldwide. The timely distribution of satellite-derived cyanoHAB data is necessary for adaptive water quality management and for targeted deployment of water quality monitoring resources. Software platforms that permit timely, useful, and cost-effective delivery of information from satellites are required to help managers respond to cyanoHABs. The Cyanobacteria Assessment Network (CyAN) mobile device application (app) uses data from the European Space Agency Copernicus Sentinel-3 satellite Ocean and Land Colour Instrument (OLCI) in near real-time to make initial water quality assessments and quickly alert managers to potential problems and emerging threats related to cyanobacteria. App functionality and satellite data were validated with 25 state health advisories issued in 2017. The CyAN app provides water quality managers with a user-friendly platform that reduces the complexities associated with accessing satellite data to allow fast, efficient, initial assessments across lakes.

Harmful Algal Bloom↗

Famine Early Warning Systems Network (FEWS NET) Land Data Assimilation System (LDAS) and Other Assimilated Hydrological Data at NASA GES DISC

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provides science support for several data sets relevant to agriculture and food security, including the Famine Early Warning Systems Network (FEWS NET) Land Data Assimilation System (LDAS), or FLDAS data set. The GES DISC is one of twelve NASA Earth Observing System (EOS) data centers that process, archive, document, and distribute data from Earth science missions and related projects. The GES DISC hosts a wide range of remote sensing and model data, and provides reliable and robust data access and other services to users worldwide. Beyond data archive and access, the GES DISC offers many services to visualize and analyze the data. This presentation provides a summary of the hydrological data available at the GES DISC, along with an overview of related data services. Specifically, the FLDAS data set has been adapted to work with domains, data streams, and monitoring and forecast requirements associated with food security assessment in data-sparse, developing country settings. The FLDAS global monthly data have a 0.1 x 0.1 degree spatial resolution covering the period from January 1982 to present. Global FLDAS monthly anomaly and monthly climatology data are also available at the GES DISC to evaluate how current conditions compare to averages over the FLDAS 35-year period. Several case studies using the FLDAS soil moisture, evapotranspiration, rainfall, runoff, and surface temperature data will be presented.

Loeser, Carlee↗