Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DYES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Cyanohydridoborate Anions: Synthesis, Salts, and Low‐Viscosity Ionic Liquids

Abstract High‐yield syntheses up to molar scales for salts of [BH(CN) 3 ] − ( 2 ) and [BH 2 (CN) 2 ] − ( 3 ) starting from commercially available Na[BH 4 ] (Na 5 ), Na[BH 3 (CN)] (Na 4 ), BCl 3 , (CH 3 ) 3 SiCN, and KCN were developed. Direct conversion of Na 5 into K 2 was accomplished with (CH 3 ) 3 SiCN and (CH 3 ) 3 SiCl as a catalyst in an autoclave. Alternatively, Na 5 is converted into Na[BH{OC(O) R } 3 ] ( R =alkyl) that is more reactive towards (CH 3 ) 3 SiCN and thus provides an easy access to salts of 2 . Some reaction intermediates were identified, for example, Na[BH(CN){OC(O)Et} 2 ] (Na 7 b ) and Na[BH(CN) 2 {OC(O)Et}] (Na 8 b ). A third entry to 2 and 3 uses ether adducts of BHCl 2 or BH 2 Cl such as the commercial 1,4‐dioxane adducts that react with KCN and (CH 3 ) 3 SiCN. Alkali metal salts of 2 and 3 are convenient starting materials for organic salts, especially for low viscosity ionic liquids (ILs). [EMIm] 3 has the lowest viscosity and highest conductivity with 10.2 mPa s and 32.6 mS cm −1 at 20 °C known for non‐protic ILs. The ILs are thermally, chemically, and electrochemically robust. These properties are crucial for applications in electrochemical devices, for example, dye‐sensitized solar cells (Grätzel cells).

Bischoff, Lisa A.↗

Polarity control at interfaces: Quantifying pseudo-solvent effects in nano-confined systems

Surface functionalization controls local environments and induces solvent-like effects at liquid–solid interfaces. We explored structure–property relationships between organic groups bound to pore surfaces of mesoporous silica nanoparticles and Stokes shifts of the adsorbed solvatochromic dye Prodan. Correlating shifts of the dye on the surfaces with its shifts in solvents resulted in a local polarity scale for functionalized pores. The scale was validated by studying the effects of pore polarity on quenching of Nile Red fluorescence and on the vibronic band structure of pyrene. Measurements were done in aqueous suspensions of porous particles, proving that the dielectric properties in the pores are different from the bulk solvent. The precise control of pore polarity was used to enhance the catalytic activity of TEMPO in the aerobic oxidation of furfuryl alcohol in water. Furthermore, an inverse relationship was found between pore polarity and activity of TEMPO in the pores, demonstrating that controlling the local polarity around an active site allows modulating the activity of nanoconfined catalysts.

36 MATERIALS SCIENCE↗

A Current Perspective on Photocatalysis

The efficient conversion of solar photons into solar electricity and solar fuels is one of the most important scientific challenges of this century owing to dwindling fossil fuel reserves and the need for clean energy. While research in the direct conversion of solar energy to electricity in the areas of low-cost photovoltaic (PV) systems based on all-inorganic semiconductors, dye-sensitized solar cells, organic, and molecular PV is more technically advanced than its direct conversion to fuels, electricity may not be the ultimate primary solar energy conversion choice owing to the intermittence of solar radiation, the considerable energy loss during transmission, the availability of cost-effective storage media for electricity, and the continuing need for liquid transportation fuels. On the other hand, the direct conversion of solar photons to fuels such as H{sub 2}, CO, alcohols, and hydrocarbons using H{sub 2}O and CO{sub 2} as feedstocks offers a solution for the storage and distribution of solar energy in the form of stable chemical bonds that can be activated to provide energy at arbitrary times and locations. The latter approach to photocatalysis is generally called artificial photosynthesis, and has received renewed interest over the past five or so years. While 'photocatalysis' has not traditionally been restricted to the generation of 'solar fuels,' and has included the production of other useful chemicals, polymerization, and environmental remediation applications, the recent upsurge of interest has been driven mostly by renewable energy issues. It was the pioneering work on photo-electrochemical splitting of water to H{sub 2} and O{sub 2} by n-type TiO{sub 2} using ultraviolet light, by Fujishima and Honda in 1972, that ushered in the area of research that has come to be known as 'solar fuels,' and that has led to the terms 'photocatalysis' and 'solar fuels' becoming almost synonymous. This special issue of ChemSusChem is devoted to providing a current perspective on the field of photocatalysis. It contains invited papers from leading researchers in a wide range of important aspects of the field that address materials, photophysical, photochemical, and electrocatalysis issues. The area remains primarily the domain of basic research studies because progress toward the promise offered by the early work has (at least until recently) been slow, despite its significance having become increasingly recognized. The present collection of papers deals with new semiconductor photocatalysts, molecular catalysts for hydrogen production and water oxidation, dye-sensitized photoelectrochemical cells, and electrochemical CO{sub 2} reduction. Overall photochemical water splitting without any applied bias potential is achieved in several systems, especially under UV irradiation. Further advances are also achieved in a few semiconductor systems, such as GaZn oxynitrides or two-step (so-called 'Z-scheme') systems to produce H{sub 2} and O{sub 2} without any sacrificial reagent under visible irradiation. When band gaps of semiconductors are narrowed to absorb more visible light for greater efficiency, or when band positions are not suitable for carrying out one-electron redox processes, multielectron catalysts are required to promote proton-coupled electron transfer reactions in producing solar fuels. In homogeneous photocatalysis systems, sacrificial reagents are typically used to investigate the catalytic activity, detailed kinetics, and mechanisms of a half reaction. Photoelectrolysis systems with immobilized catalysts (metals, metal oxides, or molecular catalysts) on electrodes can separate oxidized products, such as O{sub 2}, and reduced products, such as H{sub 2}, CO, CH{sub 3}OH, and others, by means of proton- or hydroxide-conducting membranes. The following paragraphs briefly summarize these contributions. In the area of UV-driven water splitting, Townsend et al. prepared Pt-and/or IrO{sub x}-coated niobate (Nb{sub 6}O{sub 17}{sup 4-}) nanoscrolls and tested photochemical water reduction with methanol as a sacrificial reagent, and water oxidation with AgNO{sub 3} as a sacrificial reagent. In this work, factors for improving the limited photocatalytic activity of the system are explored. Nishiyama et al. investigated factors controlling the photocatalytic water splitting activity, such as preparation temperature and crystallinity of the semiconductor materials, the amount of co-catalyst loading, and the degree of dispersion of the co-catalyst with RuO{sub 2}-loaded niobium and tantalum bronzes, M{sub 8}P{sub 4}O{sub 32}{sup 4-} (M=Nb, Ta). Their DFT calculations demonstrate that severe distortion of NbO{sub 6} octahedra plays an important role in photocatalytic water splitting.

08 HYDROGEN↗

Synthesis of N-Guanidinium-Chitosan/Silica Hybrid Composites: Efficient Adsorbents for Anionic Pollutants

A new chitosan derivative, N-guanidinium chitosan acetate, has been synthesized by direct guanylation of chitosan by cyanamide in presence of scandium(III) triflate under mild acidic condition. Starting from this material, N-guanidinium chitosan/silica microhybrids were prepared via a sol gel method using 3-glycidoxypropyl trimethoxysilane as silica precursor. Both N-guanidinium chitosan and the N-guanidinium chitosan/silica hybrid were characterized by a range of analytical techniques such as {sup 29}Si/{sup 13}C solid state NMR, FT-IR, scanning electron microscopy, thermogravimetry and elemental analysis. The characterization of the chitosan/silica hybrid indicated that this material is a highly hydrophilic nanocomposite material containing an organic core and a highly condensed silica shell. The N-guanidinium chitosan/silica microhybrids display excellent adsorption properties for anionic dyes such as methyl orange (MO) with very high capacities up to 917 mg/g. The fixation of MO as anionic dye was investigated in detail as a function of contact time, pH and the MO concentration. The adsorption kinetics of MO on N-guanidinium chitosan/silica microhybrids was more accurately described by pseudo second-order model. Langmuir isotherm model exhibited a better fit with adsorption data than Freundlich isotherm model. This work opens new possibilities for using N-guanidinium chitosan as a reusable adsorbent for water purification. Graphical Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of β-Cyclodextrin Immobilized Starch and Its Application for the Removal of Dyestuff from Waste-Water

A natural polymeric adsorbent, β-cyclodextrin immobilized starch (CS-βCD) was prepared by introducing host functional molecule β-cyclodextrin (β-CD) onto starch in presence of citric acid. The immobilization conditions were optimized to: m CA:m CS = 1:2, reaction time of 2 h and reaction temperature at 120 °C, by varying the input levels of the reactant, CS-βCD with a series of immobilization ratio (IR) and carboxyl content (CC) could be obtained. The FT-IR and {sup 13}C-NMR analysis indicated the β-CD molecules have been immobilized onto starch via the formation of ester linkages. The XRD and SEM analysis showed CS-βCD had more looser structure and more irregular surface compared with native starch. The GPC analysis showed CS-βCD had a reduced molecular weight but a more complicated molecular configuration. The adsorbing capacities of CS-βCD to three cationic dyes (methylene blue, methyl purple and basic fuchsin) were significantly improved compared with native starch, diatomite and zeolite. The adsorption behaviors of CS-βCD to the three dyes had high fitting degrees to both Langmuir and Freundlich models (R{sup 2} > 0.98). The decolourization ratio of CS-βCD to the mixed dyestuff waste-water had reached 88.75%, which was much higher than other absorbents. The results indicated the CS-βCD would become a high-efficiency dyestuff adsorbent, and would have a promising application in the industrial dyestuff waste-water treatment.

36 MATERIALS SCIENCE↗

Removal of Methylene Blue from Aqueous Solutions Using Poly(vinyl alcohol)/Montmorillonite Nanocomposite Hydrogels: Taguchi Optimization

Nanocomposite hydrogel adsorbents on the basis of poly(vinyl alcohol) containing 0, 4, 8 and 12 wt% (based on dry basis) of montmorillonite were prepared using a cyclic freezing–thawing process. The capabilities of the adsorbents in adsorbing of a cationic dye, methylene blue, were studied in aqueous solutions having different temperatures, pH and concentrations. The Taguchi method was utilized to optimize the controllable factors, including the montmorillonite loading level, the solution temperature and pH and also the methylene blue concentration in adsorption solution. The prepared nanocomposite hydrogel adsorbents were characterized by Fourier transform infrared spectroscopy and their gel content and swelling values were also measured. The results showed that the gel content and swelling of nanocomposite hydrogel adsorbents had a direct and inverse dependency to the loading level of incorporated montmorillonite to adsorbent, respectively. The successful dye adsorption by the prepared nanocomposite hydrogel adsorbents was confirmed by the Fourier transform infrared spectroscopy. Based on the Taguchi method, the optimized conditions for methylene blue adsorption were found as: montmorillonite loading level of 12 wt%, adsorption temperature of 50 °C, pH of the aqueous solution of 9 and methylene blue concentration in adsorption solution of 5 mg/L. The percentage contribution of each parameter on the removal of methylene blue was determined using the Analysis of Variance method and the following order was found: temperature > concentration of methylene blue in solution > montmorillonite loading level in adsorbent > pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of NiFe{sub 2}O{sub 4} Nanoparticles for the Enhancement of Direct Sunlight Photocatalytic Degradation of Methyl Orange

The current investigation shows the simple and direct sunlight-mediated photocatalytic degradation of methyl orange dye by quasi globular NiFe{sub 2}O{sub 4} nanocrystals synthesized from the high-temperature chemical co-precipitation method. The experiment was carried out under direct sunlight which shows significant degradation results lead to the practical possibility of heterogeneous photocatalysis towards environmental remediation. The as-synthesized quasi globular NiFe{sub 2}O{sub 4} nanocrystals also were characterized by well-known analytical measurements of their structural, morphological, bonding, surface area, band gap and magnetic properties prior to the photocatalytic experiments. The presence of active free radicals formed during the photocatalytic reaction was confirmed from the EPR signals recorded for the solution containing the photocatalyst and dye solution, and accordingly, the photocatalytic degradation mechanism was discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma Bubble Column Reactor: A High Throughput Reactor Design for Water Treatment

Plasma-based water treatment (PWT) is a promising technology that can degrade various emerging contaminants. However, PWT application on an industrially viable scale is hindered by the lack of an efficient reactor design that combines enhanced plasma-liquid contact with high liquid throughput. This work investigates the applicability of a bubble column gas-liquid contactor to PWT. A pulsed plasma bubble column reactor (PBCR) with a concentric rod-cylinder electrode configuration was used to correlate contaminant removal performance with the gas-liquid contact parameters of the bubble column. A surfactant, rhodamine B dye, and a nonsurfactant, caffeine, were used as model contaminants at µM concentration levels. The bubble column characteristics, i.e., gas holdup, bubble size distribution, and gas-liquid area, were measured as a function of superficial gas velocity using image-based methods. Degradation rates of both contaminants increased with gas flowrate. For caffeine, the increase was attributed to intensified bulk liquid mixing, while dye degradation increased due to the increased gas-liquid area. Ultimately, we show that bubble column contactors significantly improve the utilization of plasma-generated reactive species toward contaminant degradation by distributing them over a large contact area. As a result, a better match between the plasma species interfacial flux and the interfacial contaminant concentration leads to improved treatment energy efficiency. Furthermore, typical degradation energy efficiencies were ~10 g/kWh for caffeine and ~60 g/kWh for rhodamine B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel epoxy-silica nanoparticles to develop non-enzymatic colorimetric probe for analytical immuno/bioassays

We have developed a novel method to develop epoxy silica nanoparticles (EfSiNP) in a single pot. High surface coverage of epoxy functional groups between 150 and 57000 molecules per particles (~10 13 –10 16 molecules/mL of 200 nm EfSiNPs) was achieved for different preparation conditions. We then created a red colored probe by conjugating Fuchsin dye to the epoxy functionalities of EfSINPs. Anti-mouse IgG was co-immobilized with Fuchsin and their ratios were optimized for achieving optimum ratios by testing those in functional assays. Dye to antibody ratios were in good negative correlation with a coefficient of -1.00 measured at a confidence level of over 99%. We employed the developed non-enzymatic colorimetric immunonanoprobe for detecting mouse IgG in a direct immunoassay format. We achieved a sensitivity of 427 pg/mL with the assay.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct fluorescence in situ hybridization on human metaphase chromosomes using quantum dot-platinum labeled DNA probes

The telomere shortening in chromosomes implies the senescence, apoptosis, or oncogenic transformation of cells. Since detecting telomeres in aging and diseases like cancer, is important, the direct detection of telomeres has been a very useful biomarker. We propose a telomere detection method using a newly synthesized quantum dot (QD) based probe with oligonucleotide conjugation and direct fluorescence in situ hybridization (FISH). QD-oligonucleotides were prepared with metal coordination bonding based on platinum-guanine binding reported in our previous work. The QD-oligonucleotide conjugation method has an advantage where any sequence containing guanine at the end can be easily bound to the starting QD-Pt conjugate. A synthesized telomeric oligonucleotide was bound to the QD-Pt conjugate successfully and this probe hybridized specifically on the telomere of fabricated MV-4-11 and MOLT-4 chromosomes. Additionally, the QD-telomeric oligonucleotide probe successfully detected the telomeres on the CGH metaphase slide. Due to the excellent photostability and high quantum yield of QDs, the QD-oligonucleotide probe has high fluorescence intensity when compared to the organic dye-oligonucleotide probe. Our QD-oligonucleotide probe, conjugation method of this QD probe, and hybridization protocol with the chromosomes can be a useful tool for chromosome painting and FISH. - Highlights: • We prepared a probe linked between QD and telomeric oligonucleotide with platinum-guanine bonding. • Telomeres were detected by our new telomere probes successfully in three different human metaphase chromosomes. • QDPt-DNA probe has high fluorescence intensity in comparison with organic dye-DNA probe.

60 APPLIED LIFE SCIENCES↗

Cellular response to high pulse repetition rate nanosecond pulses varies with fluorescent marker identity

Nanosecond electric pulses (nsEP's) are a well-studied phenomena in biophysics that cause substantial alterations to cellular membrane dynamics, internal biochemistry, and cytoskeletal structure, and induce apoptotic and necrotic cell death. While several studies have attempted to measure the effects of multiple nanosecond pulses, the effect of pulse repetition rate (PRR) has received little attention, especially at frequencies greater than 100 Hz. In this study, uptake of Propidium Iodide, FM 1–43, and YO-PRO-1 fluorescent dyes in CHO-K1 cells was monitored across a wide range of PRRs (5 Hz–500 KHz) using a laser-scanning confocal microscope in order to better understand how high frequency repetition rates impact induced biophysical changes. We show that frequency trends depend on the identity of the dye under study, which could implicate transmembrane protein channels in the uptake response due to their chemical selectivity. Finally, YO-PRO-1 fluorescence was monitored in the presence of Gadolinium (Gd{sup 3+}), Ruthenium Red, and in calcium-free solution to elucidate a mechanism for its unique frequency trend. - Highlights: • Pulse repetition rate (PRR) is understudied in nanosecond electric pulsing. • 200 V pulses were applied to CHO-K1 cells from 5 Hz to 500 KHz. • Pulsing was repeated using a variety of fluorophores and imaging conditions. • The response is highly dependent on the fluorophore and the imaging conditions. • This may implicate protein channels in the nanoporation response.

60 APPLIED LIFE SCIENCES↗

Identification of a repressor and an activator of azoreductase gene expression in Pseudomonas putida and Xanthomonas oryzae

Highlights: • Transcriptional regulators of azoreductase of P. putida and X. oryzae were found. • They were named AzoPR (for P. putida) and AzoXR (for X. oryzae). • Despite 51% amino acid identity, AzoPR is a repressor, while AzoXR is an activator. • They respond differently to methyl red which acts as an inducer of gene expression. Genes responsible for the production of azoreductase enzymes in 2 gram-negative bacteria, the soil bacterium Pseudomonas putida (AzoP) and the plant pathogen Xanthomonas oryzae (AzoX), were identified. The deduced amino acid sequences of AzoP and AzoX, share 46% amino acid identity to each other. Two different bacterial transcription factors, a repressor (AzoPR) and an activator (AzoXR), in P. putida and X. oryzae, respectively, were found to be divergently oriented to their respective azoreductase genes. Both regulators are LysR-type transcriptional regulators (LTTR) that respond to the azo dye inducer, methyl red (MR). AzoPR represses transcription of azoP in P. putida, which is reversed when cells are exposed to MR. Interestingly, in X. oryzae, AzoXR positively regulates azoX transcription upon MR induction. Moreover, despite their similarity, with 51% amino acid sequence identity, azoPR and azoXR are expressed differently in response to MR. The transcription of azoPR is increased in a dye concentration-dependent manner, while azoXR transcription is constitutive and relatively higher than azoPR. Both regulators are autoregulatory. Gel mobility shift assays (EMSA) verified the binding between the regulators and their corresponding promoter regions. Additionally, binding only occurred under reduced conditions in the presence of 0.5 mM dithiothreitol (DTT), indicating that the proteins are active in their reduced form.

60 APPLIED LIFE SCIENCES↗

Explicit quantification of residence and flushing times in the Salish Sea using a sub-basin scale shoreline resolving model

The Salish Sea, located in the Pacific Northwest region of North America has complex currents and circulation features distributed over numerous interconnected deep basins with islands. Increased risk of exposure to oil spills and untreated wastewater from maritime emergencies and treatment plant failures have led to a need for quantifying residence and flushing characteristics at a sub-basin scale using a shoreline resolving hydrodynamic model. An unstructured grid model of the Salish Sea was developed using FVCOM with a ≈75-100m shoreline resolution. In addition to 7 tides and 23 salinity and temperature monitoring stations, an extensive currents data set from 135 stations collected over a span of three years was used for skill assessment and validation. Explicit forward computations were then conducted to define and quantify residence and flushing times in various sub-basins of interest using (a) Lagrangian particles and (b) Numerical/virtual dye experiments. The results in most basins show expected seasonal variability with longer flushing time associated with summer lower tides and lower freshwater inflows. However, contrary to expectation, flushing time is significantly longer in wintertime in large fjord-like basins such as Hood Canal (≈138 days), likely due to increased stratification and reduced mixing. The flushing time for the Puget Sound region of the Salish Sea is ≈115 days, while Georgia Basin is 240 days when analyzed as stand-alone basins with zero background concentrations. When examined as part of the flushing of the entire Puget Sound filled with virtual dye, the compounded flushing times for embedded sub-basins can be significantly longer in order of magnitudes and largely dictated by the flushing time of Puget Sound. The computed residence and flushing time scales tabulated over 36 sub-basins provide an improved understanding of water renewal in the system, informing pollution management actions.

54 ENVIRONMENTAL SCIENCES↗

Highly stable multi-anchored magnetic nanoparticles for optical imaging within biofilms

Magnetic nanoparticles are the next tool in medical diagnoses and treatment in many different biomedical applications, including magnetic hyperthermia as alternative treatment for cancer and bacterial infections, as well as the disruption of biofilms. The colloidal stability of the magnetic nanoparticles in a biological environment is crucial for efficient delivery. A surface that can be easily modifiable can also improve the delivery and imaging properties of the magnetic nanoparticle by adding targeting and imaging moieties, providing a platform for additional modification. The strategy presented in this paper includes multiple nitroDOPA anchors for robust binding to the surface tied to the same polymer backbone as multiple poly(ethylene oxide) chains for steric stability. This approach provides biocompatibility and enhanced stability in fetal bovine serum (FBS) and phosphate buffer saline (PBS). As a proof of concept, these polymer-particles complexes were then modified with a near infrared dye and utilized in characterizing the integration of magnetic nanoparticles in biofilms. Finally, the work presented in this manuscript describes the synthesis and characterization of a nontoxic platform for the labeling of near IR-dyes for bioimaging.

36 MATERIALS SCIENCE↗

Fluorescence and confocal imaging of mammalian cells using conjugated oligoelectrolytes with phenylenevinylene core

Over the last few years, considerable efforts are taken, in order to find a molecular fluorescent probe fulfilling their applicability requirements. Due to a good optical properties and affinity to biological structures conjugated oligoelectrolytes (COEs) can be considered as a promising dyes for application in fluorescence-based bioimaging. In this work, we synthetized COEs with phenylenevinylene core (PV-COEs) and applied as fluorescent membranous-specific probes. Cytotoxicity effects of each COE were probed on cancerous and non-cancerous cell types and little to no toxicity effects were observed at the high range of concentrations. The intensity of cell fluorescence following the COE staining was determined by the photoluminescence analysis and fluorescence activated cell sorting method (FACS). Intercalation of tested COEs into mammalian cell membranes was revealed by fluorescent and confocal microscopy colocalization with commercial dyes specific for cellular structures including mitochondria, Golgi apparatus and endoplasmic reticulum. The phenylenevinylene conjugated oligoelectrolytes have been found to be suitable for fluorescent bioimaging of mammalian cells and membrane-rich organelles. Due to their water solubility coupled with spontaneous intercalation into cells, favorable photophysical features, ease of cell staining, low cytotoxicity and selectivity for membranous structures, PV-COEs can be applied as markers for fluorescence imaging of a variety of cell types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthetic trends for BiVO{sub 4} photocatalysts: Molybdenum substitution vs. TiO{sub 2} and SnO{sub 2} heterojunctions

The influence of hydrothermal synthesis, thermal post-treatment at 500 Degree-Sign C and Mo content on a series of Bi{sub 1-x/3}V{sub 1-x}Mo{sub x}O{sub 4} (0.02<x<0.15) photocatalysts was investigated for methylene blue (MB) degradation and O{sub 2} evolution. Mo incorporation stabilizes the tetragonal scheelite phase of BiVO{sub 4}, thereby inducing a small blue shift of the band gap. This adverse effect can be partially compensated by incorporation of lower Mo amounts (up to ca. 4%), which stabilizes the particle morphology upon calcination. Both BiVO{sub 4}-TiO{sub 2} and BiVO{sub 4}:Mo-TiO{sub 2} heterojunction composites with TiO{sub 2} particle coatings in the 10 nm range were newly synthesized and displayed promising photocatalytic performance in MB degradation. Comparative studies with SnO{sub 2} heterojunctions revealed a superior influence of TiO{sub 2} deposition over SnO{sub 2} coating on both BiVO{sub 4} and Bi{sub 1-x/3}V{sub 1-x}Mo{sub x}O{sub 4} oxide substrates. Different synthetic guidelines for BiVO{sub 4}-based solid solutions and heterojunctions in photocatalytic wastewater treatment and water oxidation are discussed. - Graphical Abstract: The influence of Mo substitution on the structure, morphology and surface area of BiVO{sub 4} photocatalysts was investigated through hydrothermal synthesis of nanoscale Bi{sub 1-x/3}V{sub 1-x}Mo{sub x}O{sub 4} mixed oxides. Their catalytic activity in organic dye degradation and water oxidation was compared to the newly synthesized Bi{sub 1-x/3}V{sub 1-x}Mo{sub x}O{sub 4}-MO{sub 2} (M=Ti, Sn) heterojunctions. Highlights: Black-Right-Pointing-Pointer New hydrothermal approach to nanoscale Bi{sub 1-x/3}V{sub 1-x}Mo{sub x}O{sub 4} photocatalysts. Black-Right-Pointing-Pointer Influence of molybdenum substitution on organic dye degradation and water oxidation. Black-Right-Pointing-Pointer Photocatalytic activity of novel Bi{sub 1-x/3}V{sub 1-x}Mo{sub x}O{sub 4}-MO{sub 2} (M=Ti, Sn) heterojunctions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗