SEARCH · Engineering Papers

Results for “Current mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Reduced Common-Mode Voltage PWM Scheme for Full-SiC Three-Level Uninterruptible Power Supply With Small DC-Link Capacitors

In this article, a pulsewidth modulation (PWM) scheme for three-level full-SiC uninterruptible power supplies is developed to achieve a high power density. Two key passive components are selected for size reduction of the ac-ac stage: common-mode (CM) EMI filter, and dc-link capacitors. To reduce the CM noise, a new vector combination is proposed based on synchronous switching among three-phases. The proposed combinations align CM voltage (CMV) to be a single pulse per switching period. Owing to the simple shape, CMV cancellation between a three-level rectifier and inverter can be maximally utilized. A transition between the three combinations can control the drift of neutral point voltage. An equivalent carrier-based implementation is developed. Second, a simple algorithm to compensate neutral point voltage fluctuation is proposed both for differential mode (DM) and CM output voltage. Low-order harmonics on three-phase currents and an additional high-frequency CM noise by misaligned switching instant can be eliminated. The proposed compensation can be implemented by a simple correction on carrier slopes and injected zero-sequence voltage. The proposed PWM scheme is verified with 20-kW full-SiC UPS switching at 60 kHz with 140 μF dc-link capacitors.

42 ENGINEERING↗

DOE OSTI2020

Evaluation of high-stability optical beats in laser chaos by plasmonic photomixing

The stability of optical beats in a chaotically oscillating laser is compared to that of a free-running continuous-wave laser using a highly efficient plasmonic photomixer. Using a chaotically oscillating laser diode, stable optical beats are observed over an operation current range of 60-90 mA. The optical spectra are stable even with frequent mode hopping. In contrast, optical beats in a free-running continuous-wave laser are not stable compared to those of a chaotically oscillating laser, because of intermittent hopping of the laser modes. The high stability of chaotically oscillating lasers makes these lasers promising candidates for optical pump sources in terahertz time-domain spectroscopy systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Non-contact imaging of terahertz surface currents with aperture-type near-field microscopy

Terahertz (THz) near-field imaging and spectroscopy provide valuable insights into the fundamental physical processes occurring in THz resonators and metasurfaces on the subwavelength scale. However, so far, the mapping of THz surface currents has remained outside the scope of THz near-field techniques. In this study, we demonstrate that aperture-type scanning near-field microscopy enables non-contact imaging of THz surface currents in subwavelength resonators. Through extensive near-field mapping of an asymmetric D-split-ring THz resonator and full electromagnetic simulations of the resonator and the probe, we demonstrate the correlation between the measured near-field images and the THz surface currents. The observed current dynamics in the interval of several picoseconds reveal the interplay between several excited modes, including dark modes, whereas broadband THz near-field spectroscopy analysis enables the characterization of electromagnetic resonances defined by the resonator geometry.

Norman, Sarah↗

DOE OSTI2022

Novel High-Current SRF Cavity With On-Cell Waveguide Dampers

A new concept was proposed to improve the Higher-Order-Mode (HOM) damping in Superconducting Radio Frequency (SRF) cavities beyond state-of-the-art. A prototype cavity was planned to be built and tested in JLab’s Vertical Test Area as a proof-of-principle.

42 ENGINEERING↗

DOE OSTI2024

ARM FY2025 Radar Plan

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

ARM FY2025 Radar Plan

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility is dedicated to delivering high-quality radar data that significantly advance our understanding of cloud and precipitation processes, improving climate models. With radars operating across diverse frequencies, scanning modes, and global climate conditions, extensive staffing is essential for effective management. Due to current staffing constraints, achieving the expected level of operational excellence requires a more strategic approach. To address this challenge, ARM has developed an operational radar plan for the upcoming Fiscal Year 2025 (FY25) based on budget and staffing considerations. This report summarizes the Fiscal Year 2024 (FY24) ARM radar-related activities and outlines the strategic plan for FY25. It presents a comprehensive radar plan that includes detailed activities, priorities, and a projected timeline aligned with the ARM radar roadmap. Key tasks, detailed in Table 1, cover various radar operational stages and coordinated efforts among ARM teams.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Characterization of Carbon Foam Products Made from Coal at Atmospheric Pressure

Carbon foam products are currently manufactured on a commercial scale utilizing a high-pressure autoclave in batch mode. In an effort to increase manufacturing speed and reduce cost, carbon foam products (both panels and aggregates) were produced at atmospheric pressure in a continuous belt kiln. Here, the microstructure, properties, and performance of these materials were characterized and assessed in various applications. Lightweight aggregate was explored for use as a proppant, as well as it use in concrete and asphalt. The thermal conductivity, water permeability, and fire resistance of panels were evaluated, and its performance with respect to screw pullout was compared against conventional building materials. Some interesting performance aspects and potential for future work was revealed. This work was supported by a cooperative agreement with the Department of Energy – National Energy Technology Laboratory (DE-FOA-0002185, Area of Interest 4: Coal-Derived Carbon Foam Produced via a Continuous Process, award number DE-FE-0031992).

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2026

Fyn–Saracatinib Complex Structure Reveals an Active State-like Conformation

Fyn is a Src-family tyrosine kinase implicated in synaptic dysfunction and neuroinflammation across multiple neurodegenerative disorders, including Alzheimer’s disease (AD) and Parkinson’s disease (PD). Saracatinib (AZD0530) is a potent Src-family inhibitor that has been explored as a repurposed therapeutic; however, its clinical utility is limited by poor kinase selectivity caused by high sequence conservation within Src-family ATP-binding sites. Here, we combine surface plasmon resonance (SPR) and X-ray crystallography to define saracatinib recognition by the Fyn kinase domain (KD). SPR single-cycle kinetics shows that saracatinib binds the isolated Fyn KD and full-length Fyn with low-nanomolar affinity, whereas dasatinib binds with subnanomolar affinity and markedly slower dissociation. We determined the crystal structure of the Fyn KD-saracatinib complex at 2.22 Å resolution. The kinase adopts an active-like conformation with the DFG motif and αC-helix in the ‘in’ state and a conserved β3 αC Lys-Glu salt bridge. Saracatinib occupies the adenine and ribose pockets, and engages the hinge through direct and water-mediated hydrogen bonding while complementing a hydrophobic back pocket by van der Waals contacts. Comparison with reported saracatinib-bound structures of other kinases suggests that the active-state geometry observed for Fyn creates a pocket not observed in inactive-like complexes, providing a structural handle for designing Fyn-selective inhibitors. Comparison with all saracatinib-bound kinase co-structures currently available in the PDB (ALK2 and PKMYT1) indicates a conserved monodentate hinge binding mode but kinase-dependent αC-helix conformations, providing a structural rationale for designing Fyn-selective analogues.

AZD0530↗

DOE OSTI2020

A new method for operating a continuous flow diffusion chamber to investigate immersion freezing: assessment and performance study

Glaciation in mixed-phase clouds predominately occurs through the immersion freezing mode where ice nucleating particles (INPs) immersed within supercooled droplets induce nucleation of ice. Currently, model representations of this process are a large source of uncertainty in simulating cloud radiative properties, and to constrain these estimates, continuous flow diffusion chamber (CFDC)-style INP devices are commonly used to assess the immersion freezing efficiencies of INPs. In this study, a new approach was explored to operating such an ice chamber that provides maximum activation of particles without droplet breakthrough and correction factor ambiguity to obtain high-quality INP measurements in a manner that has not been demonstrated as possible previously. The conditioning section of the chamber was maintained at ~ –20 °C and water relative humidity (RH w ) ~ 113 % conditions to maximize the droplet activation, and the droplets were supercooled with an independently temperature-controlled nucleation section at a steady cooling rate (0.5 °C min –1 ) to induce the freezing of droplets and evaporation of unfrozen droplets. The performance of the modified ice chamber was evaluated using four INP species: K-feldspar, illite-NX, Argentinian soil dust, and airborne arable dust that had shown ice nucleation over a wide span of supercooled temperatures. Dry dispersed and size-selected K-feldspar particles were generated in the laboratory. Illite-NX and soil dust particles were sampled during the second phase of the Fifth International Ice Nucleation Workshop (FIN-02) campaign, and airborne arable dust particles were sampled from the aerosol inlet located on the rooftop of the laboratory. The measured ice nucleation efficiencies of model aerosols with a surface active site density (n s ) metric were higher, but mostly agreed within one order of magnitude compared to literature results.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1967

Ionospheric stabilization of the interchange mode.

Ionospheric stabilization of interchange mode calculation applied to electron debris of Star Fish event, noting role of ionospheric current

STAR FISH PROJECT↗

NASA NTRS1976

Mission planning, mission analysis and software formulation. Level C requirements for the shuttle mission control center orbital guidance software

The formulation of Level C requirements for guidance software was reported. Requirements for a PEG supervisor which controls all input/output interfaces with other processors and determines which PEG mode is to be utilized were studied in detail. A description of the two guidance modes for which Level C requirements have been formulated was presented. Functions required for proper execution of the guidance software were defined. The requirements for a navigation function that is used in the prediction logic of PEG mode 4 were discussed. It is concluded that this function is extracted from the current navigation FSSR.

Langston, L. J.↗

NASA NTRS1974

User's instructions for the GE cardiovascular model to simulate LBNP and tilt experiments, with graphic capabilities

The present form of this cardiovascular model simulates both 1-g and zero-g LBNP (lower body negative pressure) experiments and tilt experiments. In addition, the model simulates LBNP experiments at any body angle. The model is currently accessible on the Univac 1110 Time-Shared System in an interactive operational mode. Model output may be in tabular form and/or graphic form. The graphic capabilities are programmed for the Tektronix 4010 graphics terminal and the Univac 1110.

Source record↗

NASA NTRS1981

Edge delamination in angle-ply composite laminates

Edge delamination has caused severe concern in the design and analysis of advanced composite materials and structures. Due to its complex nature, very limited knowledge for the problem is currently available. It involves not only geometric and material discontinuities but also inherently coupled mode I, II and III fracture in the layered anisotropic system. Based on complex-variable stress potentials in the anisotropic elasticity theory and eigenfunction expansion, exact orders of the crack-tip stress singularity and complete field solutions are obtained. Results are given for edge delaminated, angle-ply composites subjected to uniform axial extension for illustrative purposes. Effects of geometric, lamination, and crack variables are determined.

Wang, S. S.↗

NASA NTRS1990

High power density dc/dc converter: Selection of converter topology

The work involved in the identification and selection of a suitable converter topology is described. Three new dc/dc converter topologies are proposed: Phase-Shifted Single Active Bridge DC/DC Converter; Single Phase Dual Active Bridges DC/DC Converter; and Three Phase Dual Active Bridges DC/DC Converter (Topology C). The salient features of these topologies are: (1) All are minimal in structure, i.e., each consists of an input and output bridge, input and output filter and a transformer, all components essential for a high power dc/dc conversion process; (2) All devices of both the bridges can operate under near zero-voltage conditions, making possible a reduction of device switching losses and hence, an increase in switching frequency; (3) All circuits operate at a constant frequency, thus simplifying the task of the magnetic and filter elements; (4) Since, the leakage inductance of the transformer is used as the main current transfer element, problems associated with the diode reverse recovery are eliminated. Also, this mode of operation allows easy paralleling of multiple modules for extending the power capacity of the system; (5) All circuits are least sensitive to parasitic impedances, infact the parasitics are efficently utilized; and (6) The soft switching transitions, result in low electromagnetic interference. A detailed analysis of each topology was carried out. Based on the analysis, the various device and component ratings for each topology operating at an optimum point, and under the given specifications, are tabulated and discussed.

Divan, Deepakraj M.↗

NASA NTRS1990

Simultaneous expansion and orthogonalization of measured modes for structure identification

Tests of large structures on-orbit will be performed with measurements at a relatively few structure points. Values for the unmeasured degrees of freedom (dofs) can be estimated based on measured dofs and analytical model dynamic information. These 'expanded' mode shapes are useful for optimal-update identification and damage location as well as test/analysis correlation. A new method of expansion for test mode shape vectors is developed from the orthogonal Procrustes problem from computational linear algebra. A subspace defined by the set of measured dofs is compared to a subspace defined by mode shapes from an analytical model of the structure. The method simultaneously expands and orthogonalizes the mode shape vectors. Two demonstration problems are used to compare the new method to current expansion techniques. One demonstration uses test data from a laboratory scale-model truss structure. Performance of the new method is comparable or superior to that of the previous expansion methods which require separate orthogonalization.

Smith, Suzanne Weaver↗

NASA NTRS1990

The electrochemical generation of useful chemical species from lunar materials

Electrochemical cells have been fabricated for the simultaneous generation of oxygen and lithium from a Li2O-containing molten salt (Li2O-LiCl-LiF). The cell utilizes an oxygen vacancy conducting solid electrolyte, yttria-stabilized zirconia (YSZ), to effect separation between oxygen evolving and lithium reduction half-cell reactions. The cell, which operates at 700-850 C, possesses rapid electrode kinetics at the lithium-alloy electrode with exchange current density values being greater than 60 mA/sq cm. When used in the electrolytic mode, lithium produced at the negative electrode would be continuously removed from the cell for later use (under lunar conditions) as an easily storable reducing agent for the chemical refining of lunar ores. Because of the high reversibility of this electrochemical system, it has also formed the basis for the lithium-oxygen secondary battery system which possesses the highest theoretical energy density yet investigated.

Tsai, Kan J.↗

NASA NTRS1995

Signal-processing theory for the TurboRogue receiver

Signal-processing theory for the TurboRogue receiver is presented. The signal form is traced from its formation at the GPS satellite, to the receiver antenna, and then through the various stages of the receiver, including extraction of phase and delay. The analysis treats the effects of ionosphere, troposphere, signal quantization, receiver components, and system noise, covering processing in both the 'code mode' when the P code is not encrypted and in the 'P-codeless mode' when the P code is encrypted. As a possible future improvement to the current analog front end, an example of a highly digital front end is analyzed.

Thomas, J. B.↗

NASA NTRS1995

Rectangular Waveguides with Two Conventional and Two Superconducting Walls

The propagation properties of transverse electric TE(sup pm) modes and their dispersion relations in rectangular waveguides with two conventional and two superconducting walls, derived by using the Meissner boundary conditions on the superconducting walls, are presented. In addition to recovering some previously known results, some novel results have been obtained: the cut-off wavelength of the dominant TE(sup 10) mode is greater than that of the conventional TE(sub 10) mode, and the tangential electric field and normal magnetic field for the dominant mode TE(sup 10) exist on the superconducting surfaces. Expressions for electromagnetic components, surface currents, attenuation coefficient, maximum transmitted power, dispersion and wave impedance are also presented.

Yalamanchili, Raj↗