Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Nuclear Structure Effects in the Hyperfine Structure of Muonic Lithium, Beryllium, and Boron

Nuclear structure corrections to hyperfine splitting of energy levels in muonic lithium, beryllium, and boron ions are calculated. Account is taken of the contributions from the two-photon exchange amplitudes, including the vacuum polarization effect, and from the one-photon amplitude, which provide corrections to the nuclear structure and recoil of order α{sup 5} and α{sup 6}. Numerical results for different parametrizations of electromagnetic form factors are compared.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of an Accelerator-Based Epithermal Neutron Source for Boron Neutron Capture Therapy

The paper presents a review of the current state of development of accelerator-based epithermal neutron sources for boron neutron capture therapy (BNCT), a promising method for the treatment of malignant tumors. Special attention is paid to an epithermal neutron source based on a new type of accelerator of charged particles: a tandem accelerator with vacuum insulation and a lithium neutron-producing target.

43 PARTICLE ACCELERATORS↗

Growth of n-Si layers by molecular-beam epitaxy on the substrates heavily doped with boron

Epitaxial n-Si layers doped with phosphorus or erbium have been grown by sublimation molecularbeam epitaxy at 500{sup o}C on heavily boron-doped p{sup +}-type substrates with resistivity {rho} = 0.005 {omega} cm. Distribution profiles of the B, Er, and O impurity concentrations in the samples were determined by secondary-ion mass spectrometry. A thermal annealing of the substrate in vacuum at 1300{sup o}C for 10 min and growth at a very low substrate temperature made it possible to obtain an extremely abrupt profile for doping impurities at the layer-substrate interface. This method for growth of n-p{sup +} junctions considerably improves their electrical and luminescent characteristics.

36 MATERIALS SCIENCE↗

Interaction of copper impurity with radiation defects in silicon doped with boron

The spectrum of deep levels formed in boron-doped Czochralski-grown silicon single crystals as a result of interaction of radiation defects with copper impurity is studied. It is shown that, irrespective of the order of introduction of defects (both in the case of low-temperature copper diffusion into crystals preliminarily irradiated with electrons and in the case of irradiation of the samples contaminated with copper), the same set of deep levels appears. In addition to conventional radiation defects, three types of levels have been detected in the band gap of copper-containing crystals. These levels include the level E{sub v} + 0.49 eV (already mentioned in available publications), the level E{sub v} + 0.51 eV (previously not related to copper), and a level close to the donor level of a vacancy. Based on the analysis of concentration profiles, the interstitial carbonoxygen pair is excluded from possible precursors of the copper-containing center with level E{sub v} + 0.49 eV.

36 MATERIALS SCIENCE↗

Electrically active centers formed in silicon during the high-temperature diffusion of boron and aluminum

The parameters of electrically active centers formed during the high-temperature diffusion of boron and aluminum into silicon in various media are studied by the Hall method and capacitance spectroscopy. It is found that the variation in the resistivity of the n base of the structures with p-n junctions fabricated in the study is controlled by the formation of three donor levels Q1, E4, and Q3 with the energies E{sub c} - 0.31, E{sub c} - 0.27, and E{sub c} - 0.16 eV. Diffusion in a chlorine-containing atmosphere introduces only a single level E4, but its concentration is 2.5 times lower, compared with diffusion in air. The values of the ionization energy of the Q3 level, measured under equilibrium (Hall effect) and nonequilibrium (capacitance spectroscopy) conditions, almost coincide. The deepest level E1 with an energy of E{sub c} - 0.54 eV, formed upon diffusion in both media, has no effect on the resistivity in the n base of the structures.

36 MATERIALS SCIENCE↗

Deposition of Silicon Films Doped with Boron and Phosphorus by the Gas-Jet Plasma-Chemical Method

Doped silicon films are fabricated using diborane and phosphine as doping gases by gas-jet plasma-chemical deposition with the application of an electron beam. The influence of the dopant-gas concentration, the addition of a fluorine-containing gas, and the background pressure on the conductivity and crystalline structure of silicon layers is investigated. Boron-doped amorphous films (a-Si:H) with a conductivity up to 5.2 × 10{sup –3} (Ω cm){sup –1} are fabricated; when doping with phosphorus, microcrystalline silicon films (mc-Si:H) with a crystallinity up to 70% and conductivity at a level of 1 (Ω cm){sup –1} are fabricated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ohmic Contacts to CVD Diamond with Boron-Doped Delta Layers

Various methods for the formation of ohmic contacts to boron-doped δ layers in CVD-diamond epitaxial structures are investigated. In the first variant, an additional thin heavily doped layer was formed on the diamond surface to which an ohmic contact is formed. Then, the surface p{sup +} layer between the contact pads is etched out; therefore, the current in the structure flows only through a buried δ layer. In the second approach, the doped diamond selectively grows in the contact windows under a metallic mask after preliminary etching of the undoped diamond layer (cap) up to the δ layer. In this case, the heavily doped p{sup +} layer forms an end contact to the δ layer. These two variants differ in terms of the conditions of applicability, the complexity of the manufacturing technology, the value of the contact resistance, and can be used to solve problems in which it is necessary to have a different quality of the contacts, such as the formation of transistor structures or test cells for measuring physical characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the Two-Phonon Relaxation of Excited States of Boron Acceptors in Diamond

The relaxation of holes from excited states of boron acceptors in diamond with the emission of two optical phonons is studied theoretically. To describe the wave function of acceptor states, an electron-like Hamiltonian with an isotropic effective mass is used. The wave function of the ground state is determined by the quantum-defect method. The probability of the transition is calculated in the adiabatic approximation. It is assumed that the phonon dispersion law is isotropic and the phonon frequency is quadratically dependent on the wave-vector modulus, with the maximum and minimum frequencies ω{sub max} and ω{sub min} at the center and boundary of the Brillouin zone, respectively. A high sensitivity of the probability of the transition to the characteristic of phonon dispersion ω{sub max} – ω{sub min} is revealed, especially for the transition with the energy E{sub T} in the range 2ℏω{sub min} ≤ E{sub T} < ℏω{sub min} + ℏω{sub max}. Depending on the energy of the transition and on the phonon dispersion, the two-phonon relaxation rate at the low-temperature limit varies from extremely small values (<10{sup 8} s{sup –1}) near the threshold E{sub T} = 2ℏω{sub min} to extremely large values (>10{sup 12} s{sup –1}) in the “resonance” range ℏω{sub min} + ℏω{sub max} ≤ E{sub T} ≤ 2ℏω{sub max}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Free Charge Carrier Concentration in Boron-Doped Silicon Nanowires Using Attenuated Total Reflection Infrared Spectroscopy

Attenuated total reflection infrared spectroscopy is used to determine the free charge carrier concentration in arrays of silicon nanowires with characteristic transverse sizes of 50–100 nm and a length of the order of 10 μm formed on lightly doped crystalline p-type silicon by metal-assisted chemical etching and subjected to the additional thermal-diffusion doping of boron at temperatures of 850–1000°C. It is found that the free hole concentration in arrays varies from 5 × 10{sup 18} to 3 × 10{sup 19} cm{sup –3} depending on the annealing temperature and is maximal at temperatures of 900–950°C. These results can be used to extend the range of potential application of silicon nanowires in photonics, sensorics, and thermoelectric power converters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemistry of the Arrow Poison, Tubocurarine, Using Boron Doped Diamond Electrode: Experimental and Theoretical Approaches

In present work boron doped diamond (BDD) electrode was applied for studying electrochemical behavior, as well as for quantitative determination of natural alkaloid, tubocurarine (arrow poison/ TUB). Electrochemical behavior was investigated using several organic solvents and aqueous buffers, at different pHs, as supporting electrolytes. After selection of the most appropriate supporting electrolyte and investigation of its electrochemical behavior, analytical procedures for quantitative analysis of TUB were developed in an acetonitrile/methanol (80:20) mixture and in 1 mol L−1 nitric acid, which had linear quantification ranges from 4 × 10−6 to 1 × 10−4 mol L−1 (LOD = 3.07 × 10−6 mol L−1) and 4 × 10−6 to 9 × 10−5 mol L−1 (LOD = 2.45 × 10−6 mol L−1 and 5.28 × 10−7 mol L−1, depending on the selected peak), respectively. The oxidation mechanism of TUB was proposed from the theoretical aspect. Remarkable selectivity and good sensitivity were obtained after the TUB quantification method was optimized, allowing application of the developed method for TUB quantification in biological fluids, with excellent reproducibility, accuracy and precision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Initial Results from Boron Powder Injection Experiments in WEST Lower Single Null L-mode Plasmas

Using a recently installed impurity powder dropper (IPD), boron powder (< 150 μm) was injected into lower single null (LSN) L-mode discharges in WEST. IPDs possibly enable real-time wall conditioning of the plasma-facing components and may help to facilitate H-mode access in the full-tungsten environment of WEST. The discharges in this experiment featured Ip = 0.5 MA, BT = 3.7 T, q95 = 4.3, tpulse = 12–30 s, ne,0 ~ 4×1019 m-2, and PLHCD ~ 4.5 MW. Estimates of the deuterium and impurity particle fluxes, derived from a combination of visible spectroscopy measurements and their corresponding S/XB coefficients, showed decreases of ~ 50% in O+, N+, and C+ populations during powder injection and a moderate reduction of these low-Z impurities (~ 50%) and W (~ 10%) in the discharges that followed powder injection. Along with the improved wall conditions, WEST discharges with B powder injection observed improved confinement, as the stored energy WMHD, neutron rate, and electron temperature Te increased significantly (10–25% for WMHD and 60–200% for the neutron rate) at constant input power. These increases in confinement scale up with the powder drop rate and are likely due to the suppression of ion temperature gradient (ITG) turbulence from changes in Zeff and/or modifications to the electron density profile.

Boronization↗

Hetero-junctions of Boron Nitride and Carbon Nanotubes: Synthesis and Characterization

Hetero-junctions of boron nitride nanotubes (BNNTs) and carbon nanotubes (CNTs) are expected to have appealing new properties that are not available from pure BNNTs and CNTs. Theoretical studies indicate that BNNT/CNT junctions could be multifunctional and applicable as memory, spintronic, electronic, and photonics devices with tunable band structures. This will lead to energy and material efficient multifunctional devices that will be beneficial to the society. However, experimental realization of BNNT/CNT junctions was hindered by the absent of a common growth technique for BNNTs and CNTs. In fact, the synthesis of BNNTs was very challenging and may involve high temperatures (up to 3000 degree Celsius by laser ablation) and explosive chemicals. During the award period, we have successfully developed a simple chemical vapor deposition (CVD) technique to grow BNNTs at 1100-1200 degree Celsius without using dangerous chemicals. A series of common catalyst have then been identified for the synthesis of BNNTs and CNTs. Both of these breakthroughs have led to our preliminary success in growing two types of BNNT/CNT junctions and two additional new nanostructures: 1) branching BNNT/CNT junctions and 2) co-axial BNNT/CNT junctions, 3) quantum dots functionalized BNNTs (QDs-BNNTs), 4) BNNT/graphene junctions. We have started to understand their structural, compositional, and electronic properties. Latest results indicate that the branching BNNT/CNT junctions and QDs-BNNTs are functional as room-temperature tunneling devices. We have submitted the application of a renewal grant to continue the study of these new energy efficient materials. Finally, this project has also strengthened our collaborations with multiple Department of Energy's Nanoscale Science Research Centers (NSRCs), including the Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory, and the Center for Integrated Nanotechnologies (CINTs) at Sandia National Laboratories and Los Alamos National Laboratory. Results obtained during the current funding period have led to the publication of twelve peer reviewed articles, three review papers, two book and one encyclopedia chapters, and thirty eight conference/seminar presentation. One US provisional patent and one international patent have also been filed.

36 MATERIALS SCIENCE↗

Boron-Coated Straw Collar for Uranium Neutron Coincidence Collar Replacement

The objective of this project was to design and optimize, in simulation space, an active neutron coincidence counter (or collar) using boron-coated straws (BCSs) as a non- 3 He replacement to the Uranium Neutron Coincidence Collar (UNCL). UNCL has been used by the International Atomic Energy Agency (IAEA) and European Atomic Energy Community (Euratom) since the 1980s to verify the 235 U content in fresh light water reactor fuel assemblies for safeguards purposes. This report documents the design and optimization of the BCS collar.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-pressure polymorphism of two high-strength ceramics: Boron carbide (B4C) and silicon carbide (SiC)

We have determined the lattice-level structure of two high-strength, technologically important ceramic materials under shock wave compression. For decades, laboratory shock wave studies have provided crucial information on the dynamic response of many types of materials. However, previous studies were limited to continuum-level information only. By combining laser compression with pulsed X-ray diffraction we are able to obtain in situ structural information on these materials for the first time. Silicon carbide (SiC) and boron carbide (B4C) are two high-strength ceramics with many technical applications including debris shielding, armoring, and coating. We have carried out Xray diffraction measurements of the structure of SiC and B4C under shock compression to 185 and 300 GPa, respectively. Experiments were performed at the Matter in Extreme Conditions beamline of the Linac Coherent Light Source (LCLS). At LCLS, shock waves are driven into the sample using a high powered laser with approximately 10 nanosecond pulse length. The sample is probed with X-rays from the LCLS free electron laser and diffraction is recorded by x-ray detectors. By varying the delay between the laser and the x-ray probe, the sample can be studied at various times relative to the shock wave entering the sample. The diffraction data have been analyzed to determine the crystal structures, lattice parameters, density, and crystallographic texture as a function of pressure and loading time.

36 MATERIALS SCIENCE↗

Boron-Lined Neutron Detector Measurements

Radiation portal monitors used for interdiction of illicit materials at borders include highly sensitive neutron detection systems. The main reason for having neutron detection capability is to detect fission neutrons from plutonium. The currently deployed radiation portal monitors (RPMs) from Ludlum and Science Applications International Corporation (SAIC) use neutron detectors based upon 3He-filled gas proportional counters, which are the most common large neutron detector. There is a declining supply of 3He in the world, and thus, methods to reduce the use of this gas in RPMs with minimal changes to the current system designs and sensitivity to cargo-borne neutrons are being investigated. Four technologies have been identified as being currently commercially available, potential alternative neutron detectors to replace the use of 3He in RPMs. Reported here are the results of tests of a newly designed boron-lined proportional counter option. This testing measured the neutron detection efficiency and gamma ray rejection capabilities of a system manufactured by Reuter Stokes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of Regenerable High Capacity Boron Nitrogen Hydrides as Hydrogen Storage Materials

The objective of this three-phase project is to develop synthesis and hydrogen extraction processes for nitrogen/boron hydride compounds that will permit exploitation of the high hydrogen content of these materials. The primary compound of interest in this project is ammonia-borane (NH{sub 3}BH{sub 3}), a white solid, stable at ambient conditions, containing 19.6% of its weight as hydrogen. With a low-pressure on-board storage and an efficient heating system to release hydrogen, ammonia-borane has a potential to meet DOE's year 2015 specific energy and energy density targets. If the ammonia-borane synthesis process could use the ammonia-borane decomposition products as the starting raw material, an efficient recycle loop could be set up for converting the decomposition products back into the starting boron-nitrogen hydride. This project is addressing two key challenges facing the exploitation of the boron/nitrogen hydrides (ammonia-borane), as hydrogen storage material: (1) Development of a simple, efficient, and controllable system for extracting most of the available hydrogen, realizing the high hydrogen density on a system weight/volume basis, and (2) Development of a large-capacity, inexpensive, ammonia-borane regeneration process starting from its decomposition products (BNHx) for recycle. During Phase I of the program both catalytic and non-catalytic decomposition of ammonia borane are being investigated to determine optimum decomposition conditions in terms of temperature for decomposition, rate of hydrogen release, purity of hydrogen produced, thermal efficiency of decomposition, and regenerability of the decomposition products. The non-catalytic studies provide a base-line performance to evaluate catalytic decomposition. Utilization of solid phase catalysts mixed with ammonia-borane was explored for its potential to lower the decomposition temperature, to increase the rate of hydrogen release at a given temperature, to lead to decomposition products amenable for regeneration, and direct catalytic hydrogenation of the decomposition products. Two different approaches of heating ammonia-borane are being investigated: (a) 'heat to material approach' in which a fixed compartmentalized ammonia-borane is heated by a carefully controlled heating pattern, and (b) 'material to heat approach' in which a small amount of ammonia-borane is dispensed at a time in a fixed hot zone. All stages of AB decomposition are exothermic which should allow the small 'hot zone' used in the second approach for heating to be self-sustaining. During the past year hydrogen release efforts focused on the second approach determining the amount of hydrogen released, kinetics of hydrogen release, and the amounts of impurities released as a function of AB decomposition temperature in the 'hot zone.'

08 HYDROGEN↗

Boron-Lined Neutron Detector Measurements

PNNL-18938 Revision Radiation portal monitors used for interdiction of illicit materials at borders include highly sensitive neutron detection systems. The main reason for having neutron detection capability is to detect fission neutrons from plutonium. The currently deployed radiation portal monitors (RPMs) from Ludlum and Science Applications International Corporation (SAIC) use neutron detectors based upon 3He-filled gas proportional counters, which are the most common large neutron detector. There is a declining supply of 3He in the world, and thus, methods to reduce the use of this gas in RPMs with minimal changes to the current system designs and sensitivity to cargo-borne neutrons are being investigated. Four technologies have been identified as being currently commercially available, potential alternative neutron detectors to replace the use of 3He in RPMs. Reported here are the results of tests of a newly designed boron-lined proportional counter option. This testing measured the neutron detection efficiency and gamma ray rejection capabilities of two successive prototypes of a system manufactured by GE Reuter Stokes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗