Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BODY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Numerical solution of the Navier-Stokes equations for blunt nosed bodies in supersonic flows

A time dependent, two dimensional Navier-Stokes code employing the method of body fitted coordinate technique was developed for supersonic flows past blunt bodies of arbitrary shapes. The bow shock ahead of the body is obtained as part of the solution, viz., by shock capturing. A first attempt at mesh refinement in the shock region was made by using the forcing function in the coordinate generating equations as a linear function of the density gradients. The technique displaces a few lines from the neighboring region into the shock region. Numerical calculations for Mach numbers 2 and 4.6 and Reynolds numbers from 320 to 10,000 were performed for a circular cylinder with and without a fairing. Results of Mach number 4.6 and Reynolds number 10,000 for an isothermal wall temperature of 556 K are presented in detail.

Warsi, Z. U. A.↗

Nature and evolution of the meteorite parent bodies: Evidence from petrology and metallurgy

The physical as well as chemical properties of the meteorite parent bodies are reviewed and it is concluded that many differentiated meteorites were likely formed in asteroidal-sized parents. A new model is developed for the formation of pallasites at the interface between an iron core and olivine mantle in differentiated bodies only about 10 km in diameter, which are later incorporated into a second generation of larger (100 km) parent bodies.

Wood, J. A.↗

Significance of radiation models in investigating the flow phenomena around a Jovian entry body

Formulation is presented to demonstrate the significance of a simplified radiation model in investigating the flow-phenomena in the viscous radiating shock layer of a Jovian entry body. For this, a nongray absorption model for hydrogen-helium gas is developed which consists of 30 steps over the spectral range of 0-20 eV. By employing this model results were obtained for temperature, pressure, density, and radiative flux in the shock layer and along the body surface. These are compared with results of two sophisticated radiative transport models available in the literature. Use of the present radiation model results in significant reduction in computational time. Results of this model are found to be in general agreement with results of other models. It is concluded that use of the present model is justified in investigating the flow phenomena around a Jovian entry body because it is relatively simple, computationally fast, and yields fairly accurate results.

Tiwari, S. N.↗

Postural illusions experienced during Z-axis recumbent rotation and their dependence upon somatosensory stimulation of the body surface

A blindfolded recumbent subject experiences a variety of postural illusions when rotated about his Z axis. Initially, during the acceleratory phase of rotation, turning about his Z axis is experienced; but, as rotary velocity increases, a spiraling of the body outward in the direction opposite to true rotation is experienced as well. Above 15-20 rpm, only orbital motion of the body is experienced, with the subject feeling that he is always facing in the same direction. One cycle of the apparent orbit is completed each time the subject actually rotates 360 deg. The reverse sequence of illusory motion is experienced during deceleration. The illusory motion all subjects experience during Z-axis recumbent rotation is shown to depend upon the touch and pressure stimulation of the body surface generated by contact forces of support.

Lackner, J. R.↗

Effects of precursor heating on chemical and radiative nonequilibrium viscous flow around a Jovian entry body

The influence of precursor heating on viscous chemical nonequilibrium radiating flow around a Jovian entry body is investigated. Results obtained for a 45 deg hyperboloid blunt body entering the Jupiter's nominal atmosphere at zero angle of attack indicate that the nonequilibrium radiative heating rate is significantly higher than the corresponding equilibrium heating. The precursors heating, in general, increases the radiative and convective heating to the body and this increase is slightly higher for the nonequilibrium conditions.

Tiwari, S. N.↗

Significance of radiation models in investigating the flow phenomena around a Jovian entry body

Formulation is presented to demonstrate the significance of a simplified radiation model in investigating the flow phenomena in the viscous radiating shock layer of a Jovian entry body. The body configurations used are a 55 degree sphere cone and 50 degree hyperboloid. A nongray absorption model for hydrogen-helium gas is developed which consists of 30 steps over the spectral range of 0 to 20 eV. By employing this model, results were obtained for temperature, pressure, density, the shock layer and along the body surface. These are compared with results of two sophisticated radiative transport models available in the literature.

Tiwari, S. N.↗

Effects of precursor heating on chemical and radiation nonequilibrium viscous flow around a Jovian entry body

The influence of precursor heating on viscous chemical nonequilibrium radiating flow around a Jovian entry body is investigated. Results obtained for a 45-degree hyperboloid blunt body entering Jupiter's nominal atmosphere at zero angle of attack indicate that the nonequilibrium radiative heating rate is significantly higher than the corresponding equilibrium heating. The precursor heating, in general, increases the radiative and convective heating to the body, and this increase is slightly higher for the nonequilibrium conditions.

Tiwari, S. N.↗

Study report on interfacing major physiological subsystem models: An approach for developing a whole-body algorithm

Using a whole body algorithm simulation model, a wide variety and large number of stresses as well as different stress levels were simulated including environmental disturbances, metabolic changes, and special experimental situations. Simulation of short term stresses resulted in simultaneous and integrated responses from the cardiovascular, respiratory, and thermoregulatory subsystems and the accuracy of a large number of responding variables was verified. The capability of simulating significantly longer responses was demonstrated by validating a four week bed rest study. In this case, the long term subsystem model was found to reproduce many experimentally observed changes in circulatory dynamics, body fluid-electrolyte regulation, and renal function. The value of systems analysis and the selected design approach for developing a whole body algorithm was demonstrated.

Fitzjerrell, D. G.↗

Numerical solution of flow problems using body-fitted coordinate systems

The technique of boundary-fitted coordinate systems is based on a method of automatic numerical generation of a general curvilinear coordinate system having a coordinate line coincident with each boundary of a general multi-connected region containing any number of arbitrarily shaped bodies. Once the curvilinear coordinate system is generated, any partial differential system of interest can be solved on this coordinate system by transforming the equations and solving the resulting system in finite difference approximation on the rectangular transformed plane. This method of automatic body-fitted curvilinear coordinate generation is used to construct finite-difference solutions of the full, time dependent Navier-Stokes equations for the unsteady viscous flow about arbitrary two-dimensional airfoils, or any other two-dimensional bodies. Finally, initial results for three-dimensional applications are also presented.

Thompson, J. F.↗

An experimental and theoretical investigation of the effect of nonmetric over-the-wing nacelles on wing-body aerodynamics

Drag reduction benefits due to blowing the jet exhausts over the wing for a transport-type wing-body configuration were investigated in the Langley 16-foot transonic tunnel. A combination of a wing-body model and a powered-nacelle test rig was tested at Mach numbers of 0.50 and 0.80 at angles of attack from -2 degrees to 4 degrees and jet total-pressure ratios from jet off to 3 or 4 (depending on Mach number) for a variety of nacelle locations relative to the wing. The experimental results were compared with the predictions obtained from several theoretical techniques. It was concluded that positioning of the nacelles (nonmetric) can have large effects on the wing-body drag. Some positions yielded higher drag than the baseline position, whereas others yielded lower drag than the baseline position. The theoretical method which utilized a quasi-vortex-lattice for the wing and wing-jet interaction in combination with a jet entrainment model gave generally reasonable predictions of the drag increments.

Reubush, D. E.↗

Numerical solution of the Navier-Stokes equations for arbitrary blunt bodies in supersonic flows

A time-dependent, two-dimensional Navier-Stokes code employing the body-fitted coordinate technique has been developed for supersonic flows past blunt bodies of arbitrary shape. The computer program is based on the finite-difference approximation of the compressible Navier-Stokes equations transformed to nonorthogonal curvilinear coordinates with the contravariant components of the velocity vector as dependent variables. The bow shock ahead of the body is obtained as part of the solution, by 'shock capturing'. Numerical solutions of the complete equations are presented in detail for free-stream Mach number 4.6, Reynolds number 10,000, and an isothermal wall temperature of 556 K for a circular cylinder with the free-stream outer boundaries forming a hyperbola in the front and a circular arc in the back.

Warsi, Z. U. A.↗

Experimental and numerical results of sound scattering by a body

The interaction of aerodynamic noise with a fuselage shaped body is discussed. A numerical technique is presented which permits the computation of the scattering of an acoustic source by a body at rest for frequencies of aeroacoustic interest. A parallel experiment is described which confirms the results of the computations. A numerical study of varying the geometry of the scattering is presented. In addition, the effect of forward motion on the mean velocity and static pressure profiles in the wake of such a body with a jet exiting from it is simulated. Experimental results are presented and a similarity law is given.

Maestrello, L.↗

Flow and Force Equations for a Body Revolving in a Fluid

A general method for finding the steady flow velocity relative to a body in plane curvilinear motion, whence the pressure is found by Bernoulli's energy principle is described. Integration of the pressure supplies basic formulas for the zonal forces and moments on the revolving body. The application of the steady flow method for calculating the velocity and pressure at all points of the flow inside and outside an ellipsoid and some of its limiting forms is presented and graphs those quantities for the latter forms. In some useful cases experimental pressures are plotted for comparison with theoretical. The pressure, and thence the zonal force and moment, on hulls in plane curvilinear flight are calculated. General equations for the resultant fluid forces and moments on trisymmetrical bodies moving through a perfect fluid are derived. Formulas for potential coefficients and inertia coefficients for an ellipsoid and its limiting forms are presented.

Zahm, A. F.↗

Torques on a nearly rigid body in a relativistic gravitational field

The effect of post-Newtonian potentials on the rotation of a nearly rigid body is shown to consist of a precession and a torque. The frequency of the precession can be exactly represented by means of suitable differential operators. The relativistic torques in the quadrupole approximation depend on the instantaneous orientation of the principal axes of one body with respect to the position like the classical torque and velocity of the other. For a relatively low mass body, such as a gyroscope, these velocity-dependent torques have no observable consequences.

Caporali, A.↗

Assessment of analytic methods for the prediction of aerodynamic characteristics of arbitrary bodies at supersonic speeds

Trends toward the automation of the design process for airplanes and missiles accentuate the need for analytic techniques for the prediction of aerodynamic characteristics. A number of computer codes have been developed or are under development which show promise of significantly improving the estimation of aerodynamic characteristics for arbitrarily-shaped bodies at supersonic speeds. The programs considered range in complexity from a simple linearized solution employing slender body theory to an exact finite difference solution of the Euler equations. The results from five computer codes are compared with experimental data to determine the accuracy, range of applicability, ease of use, and computer time and cost of the programs. The results provide a useful guide for selecting the appropriate method for treating bodies at the various levels of an automated design process.

Landrum, E. J.↗

Some possible effects of solid-state deformation on the thermal evolution of ice-silicate planetary bodies

Several ways in which solid-state deformation could be important in the evolution of an ice-silicate body are considered. The considerations suggest several scenarios for the evolution of Ganymede and Callisto which might be tested on the basis of Voyager and Galileo results. Several potential sources of heat may have caused extensive melting early in the history of these bodies, including a high initial luminosity of Jupiter, accretional heating, gravitational segregation of ice and silicates in a homogeneously accreted body, and deformation by synchronous rotation. The analysis leads to the conclusion that two mechanisms - diapirism and solid-state convection - could be sufficient to inhibit the development of an excessive liquid water mantle, or to cause refreezing of such a mantle formed prior to steady-state conditions or from other heat sources.

Parmentier, E. M.↗

Predicted vortex shedding from noncircular bodies in supersonic flow

A method to predict nose vortex shedding from circular and noncircular bodies in supersonic flow at angles of attack and roll is presented. The body is represented by a supersonic panel method, and the lee side vortex wake is modeled by discrete vortices in crossflow planes. The three-dimensional steady flow problem is reduced to a two-dimensional, unsteady, separated flow problem for solution. Comparison of measured and predicted surface pressure distributions, flow field surveys, and aerodynamic characteristics are presented for circular and elliptic bodies.

Mendenhall, M. R.↗

A three-dimensional body-fitted coordinate system for flow field calculations on asymmetric nosetips

A three dimensional body-fitted coordinate system developed for use in the calculation of inviscid flows over ablated, asymmetric reentry vehicle nosetips is described. Because of the potential geometric asymmetries, no standard coordinate system (e.g., spherical, axisymmetric reference surface-normal) is capable of being closely aligned with the nosetip surface. To generate a 3-D, body-fitted coordinate system an analytic mapping procedure is applied that is conformal within each meridional plane of the nosetip; these transformations are then coupled circumferentially to yield a three dimensional coordinate system. The mappings used are defined in terms of hinge points, which are points selected to approximate the body contours in each meridional plane. The selection of appropriate hinge points was automated to facilitate the use of the resulting nosetip flow field code.

Hall, D. W.↗