Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Air Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Heterogeneous multiphase flow properties of volcanic rocks and implications for noble gas transport from underground nuclear explosions

Of interest to the Underground Nuclear Explosion Signatures Experiment are patterns and timing of explosion-generated noble gases that reach the land surface. The impact of potentially simultaneous flow of water and gas on noble gas transport in heterogeneous fractured rock is a current scientific knowledge gap. This article presents field and laboratory data to constrain and justify a triple continua conceptual model with multimodal multiphase fluid flow constitutive equations that represents host rock matrix, natural fractures, and induced fractures from past underground nuclear explosions (UNEs) at Aqueduct and Pahute Mesas, Nevada National Security Site, Nevada, USA. Capillary pressure from mercury intrusion and direct air–water measurements on volcanic tuff core samples exhibit extreme spatial heterogeneity (i.e., variation over multiple orders of magnitude). Petrographic observations indicate that heterogeneity derives from multimodal pore structures in ash-flow tuff components and post-depositional alteration processes. Comparisons of pre- and post-UNE samples reveal different pore size distributions that are due in part to microfractures. Capillary pressure relationships require a multimodal van Genuchten (VG) constitutive model to best fit the data. Relative permeability estimations based on unimodal VG fits to capillary pressure can be different from those based on bimodal VG fits, implying the choice of unimodal vs. bimodal fits may greatly affect flow and transport predictions of noble gas signatures. The range in measured capillary pressure and predicted relative permeability curves for a given lithology and between lithologies highlights the need for future modeling to consider spatially distributed properties.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Mixed Alcohol Dehydration over Bronsted and Lewis Acidic Catalysts

Mixed alcohols are attractive oxygenated products of biomass-derived syngas because they may be catalytically converted to a range of hydrocarbon products, including liquid hydrocarbon fuels. Catalytic dehydration to form olefins is a potential first step in the conversion of C 2 –C 4 alcohols into longer-chain hydrocarbons. Here, we describe the physical and chemical characterization along with catalytic activity and selectivity of 4 Brønsted and Lewis acidic catalysts for the dehydration of two mixed alcohol feed streams that are representative of products from syngas conversion over K-CoMoS type catalysts (i.e., ethanol, 1-propanol, 1-butanol and 2-methyl-1-propanol). Specifically, a Lewis acidic Zr-incorporated mesoporous silicate (Zr-KIT-6), a commercial Al-containing mesoporous silicate (Al-MCM-41), a commercial microporous aluminosilicate (HZSM-5), and a commercial microporous silicoaluminophosphate (SAPO-34) were tested for mixed alcohol dehydration at 250, 300 and 350 °C. The zeolite materials exhibited high activity (>98% ethanol conversion) at all temperatures while the mesoporous materials only displayed significant activity (>10% ethanol conversion) at or above 300 °C. The turnover frequencies for ethanol dehydration at 300 °C decreased in the following order: HZSM-5 > SAPO-34 > Al-MCM-41 > Zr-KIT-6, suggesting that Brønsted acidic sites are more active than Lewis acidic sites for alcohol dehydration. At 300 °C, SAPO-34 produced the highest yield of olefin products from both a water-free ethanol rich feed stream and a C 3+ -alcohol rich feed stream containing water. Post-reaction characterization indicated changes in the Brønsted-to-Lewis acidic site ratios for Zr-KIT-6, Al-MCM-41 and HZSM-5. Ammonia temperature programmed desorption indicated that the acid sites of post-reaction samples could be regenerated following treatment in air. The post-reaction SAPO-34 catalyst contained more aromatic, methylated aromatic and polyaromatic compounds than its zeolite counterpart HZSM-5, while no aromatic compounds were observed on post-reaction Al-MCM-41 or Zr-KIT-6 catalysts. Olefin yield at 300 °C over SAPO-34 (>95%) was comparable to published values for the methanol-to-olefins process, indicating the potential industrial application of mixed alcohol dehydration. Furthermore, the olefin product distribution over SAPO-34 was tunable by the composition of the alcohol feed mixture.

09 BIOMASS FUELS↗

Effect of 60 Co γ-radiation on the tetrafluoroethylene/perfluoro(methyl vinyl ether) copolymer

The chemical and paramagnetic composition of the surface of the tetrafluoroethylene / perfluoro(methyl vinyl ether) copolymer (MFA) was investigated before and after γ-irradiation. The content of fluorine and carbon decreases at radiolysis of MFA, as well as the proportion of oxygen increases as a result of the oxidation reaction of radicals formed during γ-irradiation. The electron paramagnetic resonance (EPR) spectrum of the copolymer irradiated at 77 K contains the radicals ~CF 2 C∙FCF 2 ~ (1) and >CFOC∙F 2 (2). The absence of ~CF 2 C∙F 2 radicals, which can be formed at radiolytic rupture of the C—C bond of the copolymer main chain is associated with the effect of recombination of the resulting radical pair. The EPR spectrum of irradiated MFA at 300 K only recorded radical (1), which transform into peroxide radicals when air oxygen is introduced into the irradiated sample. Thermomechanical curves of native and radiolyzed MFA show three structural states of the amorphous block (glass, transition region, plateau of highly elastic deformation), as well as melting and molecular flow of the copolymer. The radio thermoluminescence curve shows five maxima associated with the emission of light during the recombination of stabilized ions and radicals during heating of the pre-irradiated MFA at 77 K. The temperature of the luminescence peak maximum at 336 K is close to the temperature of the onset of the devitrification of the chains of the amorphous block of MFA on the thermomechanical curve at 341 K. Irradiation leads to an increase in crystallinity of MFA. The heat of fusion of irradiated MFA on the Differential Scanning Calorimeter (DSC) curve is 50 % higher than the fusion heat of native copolymer. During the heating of γ-irradiated MFA, the relative content of COF molecules in the thermal decomposition products increases by an order of magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Sulfate Sequestration by Ba-Sn Composite Material on Re Retention in Low-Activity Waste Glass

Difficulty incorporating radioactive Tc-99 into glass during vitrification of low-activity waste (LAW) at the Hanford Site is a technical challenge. Previous studies suggested that the presence of sulfate salts in the melt hinder the incorporation of Re, a non-radioactive surrogate for Tc-99, into nuclear waste glass. In this study, we assessed the capability of a Ba-Sn composite to sequester sulfate during vitrification of AN-102 LAW feed and the resulting effects on Re retention in the glass. We also investigated a feed where the initial soluble sulfate source in the simulated LAW (Na2SO4) was replaced with insoluble BaSO4. The Ba-Sn composite-treated feed and BaSO4-substitute feed were compared to a control, AN-102 baseline. The feeds were prepared and then heated to temperatures from 400-1000 °C at 5 °C/min and air-quenched to room temperature. The heated samples and dried feeds were leached in deionized water. The solutions from the leach test were analyzed by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) to determine the amount of soluble sulfate as a function of temperature and the resulting solids were analyzed for Re retention. Although the Ba-Sn composite material successfully sequestered sulfate in the as-prepared LAW feed, heating to 400 °C resulted in most of the sulfate partitioning to a soluble salt phase. By 700°C, sulfate partitioning in the composite-treated feed was identical to the baseline feed. Throughout the entire temperature range the BaSO4-substitute feed behaved similarly to the composite-treated feed. The results of the study show that sequestering sulfate into a BaSO4 phase is ineffective for rhenium retention as the sulfate salt behavior was identical in the three feeds at =700 °C. The fraction of rhenium retained in the glass at 1000°C varied from 39.4-46.6% for the three feeds, which is shown to be an insignificant difference.

George, Jaime L.↗

Processing and properties of a solid energy fuel from municipal solid waste (MSW) and recycled plastics

Highlights: • Briquetting was used to produce solid fuels from municipal solid waste and recycled plastics. • Optimal drying, processing temperature and pressure were found to produce stable briquettes. • Addition of waste plastics yielded heating values comparable with typical coal feedstocks. • This processing method improves utilization of paper and plastic diverted from landfills. - Abstract: Diversion of waste streams such as plastics, woods, papers and other solid trash from municipal landfills and extraction of useful materials from landfills is an area of increasing interest especially in densely populated areas. One promising technology for recycling municipal solid waste (MSW) is to burn the high-energy-content components in standard coal power plant. This research aims to reform wastes into briquettes that are compatible with typical coal combustion processes. In order to comply with the standards of coal-fired power plants, the feedstock must be mechanically robust, free of hazardous contaminants, and moisture resistant, while retaining high fuel value. This study aims to investigate the effects of processing conditions and added recyclable plastics on the properties of MSW solid fuels. A well-sorted waste stream high in paper and fiber content was combined with controlled levels of recyclable plastics PE, PP, PET and PS and formed into briquettes using a compression molding technique. The effect of added plastics and moisture content on binding attraction and energy efficiency were investigated. The stability of the briquettes to moisture exposure, the fuel composition by proximate analysis, briquette mechanical strength, and burning efficiency were evaluated. It was found that high processing temperature ensures better properties of the product addition of milled mixed plastic waste leads to better encapsulation as well as to greater calorific value. Also some moisture removal (but not complete) improves the compacting process and results in higher heating value. Analysis of the post-processing water uptake and compressive strength showed a correlation between density and stability to both mechanical stress and humid environment. Proximate analysis indicated heating values comparable to coal. The results showed that mechanical and moisture uptake stability were improved when the moisture and air contents were optimized. Moreover, the briquette sample composition was similar to biomass fuels but had significant advantages due to addition of waste plastics that have high energy content compared to other waste types. Addition of PP and HDPE presented better benefits than addition of PET due to lower softening temperature and lower oxygen content. It should be noted that while harmful emissions such as dioxins, furans and mercury can result from burning plastics, WTE facilities have been able to control these emissions to meet US EPA standards. This research provides a drop-in coal replacement that reduces demand on landfill space and replaces a significant fraction of fossil-derived fuel with a renewable alternative.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Valence-Dependent Electrical Conductivity in a 3D Tetrahydroxyquinone-Based Metal–Organic Framework

Electrically conductive metal–organic frameworks (cMOFs) have become a topic of intense interest in recent years because of their great potential in electrochemical energy storage, electrocatalysis, and sensing applications. Most of the cMOFs reported hitherto are 2D structures, and 3D cMOFs remain rare. Herein we report FeTHQ, a 3D cMOF synthesized from tetrahydroxy-1,4-quinone (THQ) and iron(II) sulfate salt. FeTHQ exhibited a conductivity of 3.3 ± 0.55 mS cm –1 at 300 K, which is high for 3D cMOFs. The conductivity of FeTHQ is valence-dependent. Additionally, a higher conductivity was measured with the as-prepared FeTHQ than with the air-oxidized and sodium naphthalenide-reduced samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of synthetic aperture radar and impact-echo imaging for detecting delamination in concrete

In this paper we evaluate the utility of microwave and mechanical wave nondestructive testing techniques to detect delamination in reinforced concrete bridge deck mock-up samples. The mechanical wave tests comprise air-coupled impact-echo measurements, while the microwave measurements comprise three-dimensional synthetic aperture radar imaging using wideband reflectometery in the frequency range of 1–4 GHz. The results of these investigations are presented in terms of images that are generated from these data. Based on a comparison of the results, we show that the two methods are complementary, in that provide distinct capabilities for defect detection. More specifically, the former approach is unable to detect depth of a delaminated region, while the latter may provide this information. Therefore, the two methods may be used in a complementary fashion (i.e., data fusion) to give more comprehensive information about the 3D location of delamination.

42 ENGINEERING↗

Existence of Fe{sup 4+} ions in Co{sub 2.25}Fe{sub 0.75}O{sub 4} spinel ferrite confirmed from SXRD and XANES spectroscopy

The Co{sub 2.25}Fe{sub 0.75}O{sub 4} ferrite composition has been prepared by chemical co-precipitation route. The as-prepared sample after annealing at 900°C in air formed single phase cubic spinel structure. Synchrotron X-ray diffraction and X-ray absorption near edge structure (XANES) measurements were used to study charge states of the cations in octahedral and tetrahedral sites of the cubic spinel structure. Raman spectra indicated normal cubic spinel structure. XANES data suggested the existence of Fe{sup 4+} ions in the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen diffusion and segregation during solid phase epitaxial regrowth of preamorphized Si

The redistribution of hydrogen during solid phase epitaxial regrowth (SPER) of preamorphized silicon has been experimentally investigated, modeled, and simulated for different H concentrations and temperatures. H was introduced by H implantation and/or infiltration from the sample surface during partial thermal anneals in air in the 520–620 °C temperature range. We characterized the time evolution of the H redistribution by secondary ion mass spectrometry and time resolved reflectivity. The good agreement between all experimental data and the simulations by means of full rate equation numerical calculations allows the quantitative assessment of all the phenomena involved: in-diffusion from annealing atmosphere and the H effect on the SPER rate. We describe the temperature dependence of microscopic segregation of H at the amorphous/crystal (a-c) interface. Only a fraction of H atoms pushed by the a-c interface can be incorporated into the crystal bulk. We propose an energetic scheme of H redistribution in amorphous Si. The segregation of H at the a-c interface is also considered for (110) and (111) orientated substrates. Our description can also be applied to other material systems in which redistribution of impurities during a solid-solid phase transition occurs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dissimilar responses of fungal and bacterial communities to soil transplantation simulating abrupt climate changes

Both fungi and bacteria play necessary roles in regulating soil carbon cycling. To implement future carbon stability, it is imperative to understand their responses to environmental changes, which is subject to large uncertainty. As current global warming is causing range shifts toward higher latitudes, we conducted three reciprocal soil transplantation experiments over large transects in 2005 to simulate abrupt climate changes. Six years after soil transplantation, fungal biomass of transplanted soils showed a general pattern of changes from donor sites to destination, which were more obvious in bare fallow soils than in maize cropped soils. Strikingly, fungal community compositions were clustered by sites, demonstrating that fungi of transplanted soils acclimatized to the destination environment. Several fungal taxa displayed sharp changes in relative abundance, including Podospora, Chaetomium, Mortierella and Phialemonium. In contrast, bacterial communities remained largely unchanged. Consistent with the important role of fungi in affecting soil carbon cycling, 8.1%-10.0% of fungal genes encoding carbon-decomposing enzymes were significantly (p < 0.01) increased as compared with those from bacteria (5.7%-8.4%). To explain these observations, we found that fungal occupancy across samples was mainly determined by annual average air temperature and rainfall, whereas bacterial occupancy was more closely related to soil conditions, which remained stable 6 years after soil transplantation. Together, these results demonstrate dissimilar response patterns and resource partitioning between fungi and bacteria, which may have considerable consequences for ecosystem-scale carbon cycling.

54 ENVIRONMENTAL SCIENCES↗

Electrical, optical, and photoluminescence properties of ZnO films subjected to thermal annealing and treatment in hydrogen plasma

The photoluminescence and optical absorption spectra and electrical properties of ZnO films grown by the metal–organic chemical vapor deposition and hydrothermal techniques, subjected to heat treatments and plasma treatment in a hydrogen atmosphere, are studied. It is shown that the adsorption of oxygen at grain boundaries upon annealing in an oxidizing atmosphere determines the electrical properties of the films. Vacuum annealing improves the electrical properties of the samples after degradation induced by annealing in air. Treatment in hydrogen plasma passivates surface states at the grain boundaries. The intrinsic photoluminescence intensity after plasma treatment is higher in the case of increased amounts of oxygen adsorbed at grain surfaces upon annealing in air. Surface states involving oxygen and hydrogen atoms are responsible for the high-intensity intrinsic photoluminescence band.

36 MATERIALS SCIENCE↗

Pilot-Scale Removal of Fluoride from Legacy Plutonium Materials Using Vacuum Salt Distillation

Between September 2009 and January 2011, the Savannah River National Laboratory (SRNL) and HB-Line designed, developed, tested, and successfully deployed a system for the distillation of chloride salts. In 2011, SRNL adapted the technology for the removal of fluoride from fluoride-bearing salts. The method involved an in situ reaction between potassium hydroxide (KOH) and the fluoride salt to yield potassium fluoride (KF) and the corresponding oxide. The KF and excess KOH can be distilled below 1000°C using vacuum salt distillation (VSD). The apparatus for vacuum distillation contains a zone heated by a furnace and a zone actively cooled using either recirculated water or compressed air. During a vacuum distillation operation, a sample boat containing the feed material is placed into the apparatus while it is cool, and the system is sealed. The system is evacuated using a vacuum pump. Once a sufficient vacuum is attaned, heating begins. Volatile salts distill from the heated zone to the cooled zone where they condense, leaving behind the non-volatile material in the feed boat. Studies discussed in this report were performed involving the use of non-radioactive simulants in small-scale and pilot-scale systems as well as radioactive testing of a small-scale system with plutonium-bearing materials. Aspects of interest include removable liner design considerations, boat materials, in-line moisture absorption, and salt deposition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Aerosol Engineering Facility 2021-22 summary sheet [Slides]

The Aerosol Engineering Facility solves problems that involve radioactive particulates, including HEPA air filters, storage containers, exhaust stacks, and continuous air monitors. Other work includes silica dust sampling, bioaerosols, and insecticide sprays. Aerosol technology science describes the behavior of microscopic and nano-sized particles, in both molecular and continuum gas flow regimes.

36 MATERIALS SCIENCE↗

Oxidation of TD nickel at 1050 C and 1200 C as compared with three grades of nickel of different purity

The isothermal oxidation of three nickels of different purity, Ni-200, Ni-270, and JM-Ni, was compared with that of TD-Ni in air at 1050 and 1200 C. The samples were oxidized as ground, as polished, or as annealed and polished. Weight change, metal loss, scale thickness, oxide morphology, and scale texture were determined. In degree of oxidation, TD-Ni was nearly the same as the higher purity materials, Ni-270 and JM-Ni; and less pure Ni-200 oxidized more than the others. However, in microstructure and scale texture the TD-Ni more closely resembled Ni-200. Grinding only charged the texture of the oxides of Ni_200 and TD-Ni.

Lowell, C. E.↗

A computer program for calculation of spectral radiative properties of gas mixtures

A computer code is described whereby calculations of radiative properties of gas mixtures may be made. The program is arranged so that distinct radiative processes for each species are computed in individual subroutines. Provision is made for calculating radiative properties in nonequilibrium situations - separate rotational, vibrational, and electronic temperatures may be used. These features should provide a flexibility not currently available in such programs. The basic equations and the program listing in FORTRAN 4 language are presented. Sample calculations are given for high temperature air and carbon dioxide and are compared to calculations made with previously developed programs.

Nealy, J. E.↗

Laboratory measurements of p-wave seismic Q on lunar and analog rocks

The longitudinal-wave, internal friction quality factor (Qp) of out-gassed rock subjected to hydrostatic confining pressure was measured by a technique of aerodynamically shaping the sample ends to remove most of the air drag. Q values of about 1000 and 100 were obtained at 100 MPa and in laboratory air, respectively. The temperature dependence of Q in lunar rock 70215.85 and an analog of lunar basalt was investigated over the range -100 to 450 deg C. A systematic increase in Q was observed at 50 Hz, 5 kHz and 50 kHz. When the temperature was lowered to -100 deg C moderate decreases in Q were observed from 100 to 250 deg C, and high Q values were obtained at 450 deg C. The temperature and pressure dependences of Q suggest that high lunar seismic Q values imply a very dry crust to depths of at least 50 km. These results further indicate that elastic waves are damped in volatile-rich rock by an absorption mechanism which involves changes in the bonding, structure and coverage of the molecular, physisorbed and chemisorbed H2O at crack and grain boundaries.

Tittmann, B. R.↗

A portable x-ray analyzer for wearmetal particles in lubricants

An extensive program exists for the systematic sampling and analysis of lubricants in U.S. Air Force aircraft engines. The sudden development of excessive engine wear can usually be detected on the basis of monitoring the concentration of several key metallic elements for each aircraft engine. In many cases even the specific fault within an engine can be recognized. The two types of equipment which are currently being employed for the conduction of oil analyses make use of atomic emission or atomic absorption spectroscopy. In both cases, heavy, large, and relatively fragile pieces of equipment are involved. Difficulties concerning the transportation of these devices have led to the development of a small, sturdy, and easily portable wearmetal analyzer. The analyzer makes use of an X-ray fluorescence technique.

Clark, B. C.↗