Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTITUDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Minimum time attitude slewing maneuvers of a rigid spacecraft

The problems of large-angle attitude maneuvers of a spacecraft have gained much consideration in recent years. The configurations of the spacecraft considered are: completely rigid, a combination of rigid and flexible parts, or gyrostat-type systems. The performance indices usually include minimum torque integration, power criterion, and frequency-shaped cost functionals. The minimum time slewing problem of a rigid spacecraft was examined. Optimal control theory (Maximum Principal) was applied to the slewing motion of a general rigid spacecraft. Control torque about all three axes was computed. The equations for the system are composed of the Euler dynamical equations in the spacecraft body axes and the quaternion kinematical equation. By introducing the costates for the quaternion and the angular velocity, the Hamiltonian of the system can be formed and the optimal control obtained. Finally the methods are applied to the SCOLE slewing motion. The control variables include three control moments on the Shuttle and two control forces on the reflector. Numerical results are discussed.

Li, Feiyue↗

Nonlinear attitude control of elastic spacecraft-antenna system

An approach to large angle rotational maneuvers of a spacecraft-beam-tip body (an antenna or a reflector) configuration based on nonlinear invertibility and linear feedback stabilization is presented. A control law u sub d is derived to obtain independent decoupled control of attitude angles, lateral elastic deflections, slopes due to bending and angular deflection due to torsion at the tip of the beam using torquers and force actuators. For the stabilization of the elastic oscillations, a linear feedback control law, u sub s, is obtained based on a linearized model about the terminal state augmented with a servo-compensator. Simulation results obtained for single axis control, for simplicity, show that large slewing and elastic mode stabilization can be accomplished in spite of uncertainty in the system using the total control u = u sub d + u sub s.

Singh, S. N.↗

The Spartan attitude control system - Control electronics assembly

The Spartan attitude control system (ACS) represents an evolutionary development of the previous STRAP-5 ACS through the use of state-of-the-art microprocessors and hardware. Despite a gyro rate signal noise problem that caused the early depletion of argon gas, the Spartan 101 experiment was able to collect several hours of data from two targets. Attention is presently given to the ACS sequencer module, sensor interface box, valve driver box, control electronics software, jam tables, and sequencer programs.

Stone, R. W.↗

The Spartan attitude control system - Ground support computer

The Spartan Attitude Control System (ACS) contains a command and control computer. This computer is optimized for the activities of the flight and contains very little human interface hardware and software. The computer system provides the technicians testing of Spartan ACS with a convenient command-oriented interface to the flight ACS computer. The system also decodes and time tags data automatically sent out by the flight computer as key events occur. The duration and magnitude of all system maneuvers is also derived and displayed by this system. The Ground Support Computer is also the primary Ground Support Equipment for the flight sequencer which controls all payload maneuvers, and long term program timing.

Schnurr, R. G., Jr.↗

The mission configuration process for the Spartan attitude control system

The Spartan attitude control system (ACS) control electronics assembly cold plate has a standard connector interface to the rest of the Spartan payload and ground equipment. The connectors carry gyro signals, optical sensor signals, the experiment interface, the gas command decoder interface, and a pneumatics interface. Different flights can employ different optical sensor complements; the ACS engineer must accordingly connect the sensor error signals to the proper pins and connectors on the ACS electronics.

Stone, R. W.↗

Nonlinear attitude control of flexible spacecraft under disturbance torque

A control law for large-angle single-axis rotational maneuvers of a spacecraft-beam-tip body (an antenna or a reflector) configuration is presented. It is assumed that an unknown but bounded disturbance torque is acting on the spacecraft. A model reference adaptive torque control law is derived for the slewing of the space vehicle. This controller includes a dynamic system in the feedback path and requires only attitude angle and rate of the space vehicle for feedback. For damping out the elastic motion excited by the slewing maneuver, a stabilizer is designed assuming that a torquer and a force actuator are available at the tip body. The stabilizer uses only the flexible modes for the synthesis of the control law. Simulation results are presented to show that fast, large-angle rotational maneuvers can be performed using the adaptive controller and the stabilizer in spite of the presence of continuously acting unknown torque on the spacecraft.

Singh, Sahjendra N.↗

Space Infrared Telescope Facility/Multimission Modular Spacecraft Attitude Control System conceptual design

A control system utilizing the Multi-mission Modular Spacecraft (MMS) Attitude Control System (ACS) was developed and analyzed for the Space Infrared Telescope Facility (SIRTF) spacecraft. Alternative torquer augmentation schemes were studied to determine viable ACS approaches. A control law was developed to use a dual set of single-axis Control Moment Gyros (CMGs) for two-axis control. Flexible structural models were developed using a high fidelity, flight tested NASTRAN model of the MMS, coupled with a NASTRAN model of the SIRTF telescope. Modal significance criteria were employed to reduce the structural model. Multivariable interactive techniques were used to synthesize the control system (including the structural filters). Control system performance for the SIRTF operational modes (quiescent inertial hold, slewing, nodding, and rastering) was then determined using both single-axis and three-axis simulations). The control system described met performance requirements for all modes but the raster with the use of CMGs. The raster performance was limited by the structural flexibility.

Class, Brian F.↗

The Galileo attitude and articulation control system - A radiation-hard, high precision, state-of-the-art control system

The Galileo mission and spacecraft, consisting of a Jupiter-orbiter and an atmospheric entry probe, are discussed. Components will include: magnetometers and plasma-wave antennas on a boom, high-gain antenna, probe vehicle, two different bus electronics packages, and a radioisotope thermoelectric generator. Instruments, investigators and objectives are tabulated for both probe science and orbiter science investigations. Requirements in the design of the attitude and articulation control system are very stringent because of the complex dynamics, flexible body effects, the need for autonomy, and the severe radiation environment in the Jupiter nighborhood. Galileo was intended to be ready for launch via Space Shuttle in May of 1986.

Stephenson, R. Rhoads↗

Robust nonlinear attitude control of flexible spacecraft

This paper presents an approach to large-angle rotational maneuvers of a spacecraft-beam-tip body configuration based on nonlinear invertibility and linear feedback stabilization. A control law u sub d is derived for the decoupled control of attitude angles, lateral elastic deflections, slopes due to bending and angular deflection due to torsion at the tip of the beam using torquers and force actuators. For the stabilization of the elastic modes, a linear feedback control law u sub s is obtained based on a linearized model augmented with a servocompensator. Simulation results are presented to show that large slewing and elastic mode stabilization can be accomplished.

Singh, Sahjendra N.↗

An innovative design for autonomous backup attitude control of the Gamma Ray Observatory

The Gamma Ray Observatory is a NASA funded three-axis stabilized spacecraft which will carry four scientific instruments to observe gamma ray phenomena. The requirement to protect the scientific mission from system failures led to the attitude control and determination system design described in this paper. The design employs nine control modes with error detection, hardware substitution, and autonomous mode switching. The system architecture evolved to eliminate cross-dependence between the primary on-board computer (OBC) and the backup control processor electronics. Cross strapping of sensors and actuators and separation of the input/output electronics ensure that a reliable set of sensors and actuators will be available for backup mode operation. The OBC software includes failure detection, hardware reconfiguration, and mode switching logic which provide the ability to autonomously transfer, upon anomaly, to a reliable backup mode. Verification of this mode transition design is done in four test programs: at the unit level, by analytical simulation, by a hybrid breadboard electronics-simulation setup, and by a flight hardware-simulation test.

Tai, F.↗

Reducing Drift In Computation Of Spacecraft Attitude

Error in approximation less than computer truncation error. Report discusses scheme for reduction of computational drift in estimation of attitude of spacecraft from strapdown-gyroscope measurements.

Huang, Whittak H.↗

Attitude Control Working Group report

The goals were to establish the Attitude Control System (ACS) requirements, constraints, technology assessment, technology shortfalls, expected in the year 2000. These were based upon all missions, military and civil, for LEO and GEO. The critical ACS technology issues were identified and ACS programs developed to address these critical issues.

Reid, Daniel F.↗

Development of a coupled expert system for the spacecraft attitude control problem

A majority of the current expert systems focus on the symbolic-oriented logic and inference mechanisms of artificial intelligence (AI). Common rule-based systems employ empirical associations and are not well suited to deal with problems often arising in engineering. Described is a prototype expert system which combines both symbolic and numeric computing. The expert system's configuration is presented and its application to a spacecraft attitude control problem is discussed.

Kawamura, K.↗

The Galileo Attitude and Articulation Control System - A radiation-hard, high precision, state-of-the-art control system

The Galileo Mission and Spacecraft design impose tight requirements on the Attitude and Articulation Control System (AACS). These requirements, coupled with the flexible spacecraft, the need for autonomy, and a severe radiation environment, pose a great challenge for the AACS designer. The resulting design and implementation are described, along with the discovery and solution of the Single-Event Upset problem. The status of the testing of the AACS in the Integration and Test Laboratory as well as at the spacecraft level is summarized.

Rhoads Stephenson, R.↗

Magellan attitude and articulation control subsystem closed loop testing

In the spring of 1989, the Magellan spacecraft will embark on a two-year mission to map the surface of the planet Venus. Guiding it there will be the Attitude and Articulation Control Subsystem (AACS). To ensure reliable operations the AACS is being put through a rigorous test program at Martin Marietta Denver Aerospace. Before Magellan ever leaves the Space Shuttle bay from which it is to be launched, its components will have flown a simulated spaceflight in a ground-based lab. The primary objectives of the test program are to verify form, fit, and function of the AACS, particularly subsystem external interfaces and functional operation of the flight software. This paper discusses the Magellan Closed Loop Test Systems which makes realistic tests possible by simulating the dynamic and 'visual' flight environment for AACS components in the lab.

Olschansky, David G.↗

Minimum time attitude slewing maneuvers of a rigid spacecraft

The minimum time attitude slewing motion of a rigid spacecraft with its controls provided by torques and forces, which have their upper and lower limits prescribed, is considered. The two-point boundary-value problem is derived by applying the Pontriagin's Maximum Principle to the system and solved by using a quasi-linearization algorithm. The nominal solutions to the problem as well as the starting values of the total slewing time and the unknown initial costates for this algorithm are generated by using Euler's eigenaxis rotation theorem. It is pointed out that one of the four initial costates associated with the quaternions can be arbitrarily selected without affecting the optimal controls and, thus, simplifying the computation. The minimum slewing time is determined by shortening the total slewing time until at least one of the controls becomes a bang-bang type. Several numerical tests for the rigidized SCOLE model are presented to show the applications of the methods.

Li, Feiyue↗

Embedding of attitude determination in n-dimensional spaces

The problem of attitude determination in n-dimensional spaces is addressed. The proper parameters are found, and it is shown that not all three-dimensional methods have useful extensions to higher dimensions. It is demonstrated that Rodriguez parameters are conveniently extendable to other dimensions. An algorithm for using these parameters in the general n-dimensional case is developed and tested with a four-dimensional example. The correct mathematical description of angular velocities is addressed, showing that angular velocity in n dimensions cannot be represented by a vector but rather by a tensor of the second rank. Only in three dimensions can the angular velocity be described by a vector.

Bar-Itzhack, Itzhack Y.↗

Measurements of pressures on the tail and aft fuselage of an airplane model during rotary motions at spin attitudes

The NASA-Langley Spin Tunnel was used to determine the empennage and aft fuselage surfaces of an aircraft model while it was rotated at spinning-event attitudes, in order to ascertain stern flow conditions and the effects of horizontal tail, as well as the wings, on the vertical tail. A substantial horizontal tail influence is noted on both sides of the vertical tail; the removal of the horizontal tail was found to change the propelling or damping moment characteristics of the vertical tail. The wing was also found to have a large influence on the magnitude of the pressures measured on both the empennage and the aft-fuselage areas.

Hultberg, Randy S.↗