Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Photoconductivity of InAs/GaAs structures with InAs nanoclusters in the near-infrared region

InAs/GaAs multilayered heterostructures containing dense arrays of the low-defect partially relaxed InAs nanoclusters larger than defect-free quantum dots are fabricated by metal-organic chemical vapor deposition in an atmospheric-pressure reactor. The structures have intense photoconductivity in the wavelength range of 1-2 {mu}m at room temperature. The detectivity of fabricated prototypes of photodetectors is D* = 10{sup 9} cm Hz{sup 1/2} W{sup -1}. The relaxation time of photoconductivity at a wavelength of 1.5 {mu}m is less than 10 ns.

36 MATERIALS SCIENCE↗

The cyclotron resonance of holes in InGaAs/GaAs heterostructures with quantum wells in quantizing magnetic fields

The spectra of the cyclotron resonance of holes in the InGaAs/GaAs selectively doped heterostructures with quantum wells are studied in pulsed magnetic fields as high as 50 T at 4.2 K. The previously observed effect of the inverted (compared with the results of the single-particle calculation of the Landau levels) ratio of the spectral weight of two split components of the line of the cyclotron resonance, which is attributed to the effects of the exchange interaction of holes, is confirmed. It is found that the ratios of intensities of the components of the line of the cyclotron resonance profoundly differ on the ascending and descending branches of the magnetic field pulse, which may be associated with a long time of the spin relaxation of holes between the two lowest Landau levels, which constitute tens of milliseconds.

36 MATERIALS SCIENCE↗

Trapping of charge carriers into InAs/AlAs quantum dots at liquid-helium temperature

The problem of how the probability of trapping of charge carriers into quantum dots via the wetting layer influences the steady-state and time-dependent luminescence of the wetting layer and quantum dots excited via the matrix is analyzed in the context of some simple models. It is shown that the increase in the integrated steady-state luminescence intensity of quantum dots with increasing area fraction occupied by the quantum dots in the structure is indicative of the suppression of trapping of charge carriers from the wetting layer into the quantum dots. The same conclusion follows from the independent decays of the time-dependent luminescence signals from the wetting layer and quantum dots. The processes of trapping of charge carriers into the InAs quantum dots in the AlAs matrix at 5 K are studied experimentally by exploring the steady-state and time-dependent photoluminescence. A series of structures with different densities of quantum dots has been grown by molecular-beam epitaxy on a semi-insulating GaAs (001) substrate. It is found that the integrated photoluminescence intensity of quantum dots almost linearly increases with increasing area occupied with the quantum dots in the structure. It is also found that, after pulsed excitation, the photoluminescence intensity of the wetting layer decays more slowly than the photoluminescence intensity of the quantum dots. According to the analysis, these experimental observations suggest that trapping of excitons from the wetting layer into the InAs/AlAs quantum dots at 5 K is suppressed.

36 MATERIALS SCIENCE↗

Laser diodes with several emitting regions ({lambda} = 800-1100 nm) on the basis of epitaxially integrated heterostructures

The results of a series of studies concerned with formation of epitaxially integrated InGaAs/AlGaAs and AlGaAs/AlGaAs heterostructures with several emitting regions and with investigation of properties of laser diodes based on the above structures operating in the spectral ranges {lambda} = 800-810, 890-910, and 1040-1060 nm are summarized. It is shown that the suggested approach to integration of individual laser structures by the method of the MOVPE epitaxy operates efficiently in fabrication of laser diodes for a wide spectral range on the basis of various types of heterostructures. This approach made it possible to efficiently increase the output power of the laser diodes practically without variation in their mass-and-dimension characteristics. The main advantages of this approach and its limitations are outlined. Epitaxial integration of two laser heterostructures made it possible to increase the differential quantum efficiency by 1.7-2.0 times, while integration of three laser heterostructures increases the differential quantum efficiency by a factor of 2.5-3.0.

36 MATERIALS SCIENCE↗

Effect of the built-in electric field on optical and electrical properties of AlGaAs/InGaAs/GaAs P-HEMT nanoheterostructures

This study is concerned with the photoluminescence spectra and electrical parameters of AlGaAs/InGaAs/GaAs pseudomorphic high-electron-mobility transistor (P-HEMT) structures with a quantum well grown at different depths L{sub b} with respect to the surface. The samples are produced so as to make the concentration of electrons in the quantum well unchanged, as the barrier layer thickness L{sub b} is reduced. It is established that the photoluminescence spectra of all of the samples exhibit peaks at the photon energies h{sub {omega}} = 1.28-1.30 and 1.35-1.38 eV. The ratio between the intensities of these peaks increases as L{sub b} is decreased. Calculations of the band structure show that variations in the spectra are due to the fact that the built-in electric field increases as the quantum well is set closer to the surface.

36 MATERIALS SCIENCE↗

Electroluminescence and absorption spectra of low-optical-loss semiconductor lasers based on InGaAs/AlGaAs/GaAs QW heterostructures

Spontaneous emission, optical loss, and gain spectra of a laser heterostructure with a quantum-well InGaAs active region have been studied at various optical and electrical pumping levels. It is shown that carrier accumulation in the active region under open-circuit conditions for the photocurrent leads to disappearance of the long-wavelength edge peak in the absorption spectrum. It is found that flowing photocurrent precludes accumulation of photogenerated carriers, with the result that the absorption spectrum retains its shape, irrespective of the optical pumping level. It is shown that many-particle effects of carrier interaction lead to a temperature-unrelated narrowing of the band gap in the InGaAs quantum-well active region by up to 30 meV and to tailing of the long-wavelength edge of the gain spectrum. As a result, a spectral range can be found for mesa-stripe laser diodes in which the gain in the region under the stripe contact is positive and the loss in passive regions is close to zero.

36 MATERIALS SCIENCE↗

Electrochemical capacitance-voltage profiling of the free-carrier concentration in HEMT heterostructures based on InGaAs/AlGaAs/GaAs compounds

The depth distribution of free carriers over the HEMT structures with quantum-well layers is studied by electrochemical capacitance-voltage profiling. It is shown that the actual distribution of the concentration of free carriers and their energy spectrum in the HEMT structure channel can be obtained by numerical simulation of the results of profiling based on the self-consistent solution of one-dimensional Schroedinger and Poisson equations.

36 MATERIALS SCIENCE↗

Effect of AlGaAs-(AlGa){sub x}O{sub y} pedestal parameters on characteristics of a microdisk laser with active region based on InAs/InGaAs quantum dots

Effect of parameters of the AlGaAs-(AlGa){sub x}O{sub y} layer forming the pedestal of a microdisk laser with an active region based on InAs/InGaAs quantum dots on specific features of the emission spectrum at a temperature of 15 K under optical excitation has been studied. A decrease in the oxidation depth of the Al{sub 0.97}Ga{sub 0.03}As layer results in a decrease in the intensity of 'whispering gallery mode' lines; simultaneously, the lasing threshold becomes higher and the Q factor is diminished by increased leakages into the substrate region.

36 MATERIALS SCIENCE↗

Scattering and electron mobility in combination-doped HFET-structures AlGaAs/InGaAs/AlGaAs with high electron density

Molecular-beam epitaxy is used for growing structures differing in doping technique and doping level and having a high two-dimensional-electron concentration n{sub s} in the quantum well. The effect of doping combining uniform and {delta} doping on the electron-transport properties of heterostructures is investigated. A new type of structure with a two-sided silicon {delta} doping of GaAs transition layers located on the quantum-well boundaries is proposed. The largest value of electron mobility {mu}{sub H} = 1520 cm{sup 2}/(V s) is obtained simultaneously with a high electron density n{sub s} = 1.37 Multiplication-Sign 10{sup 13} cm{sup -2} at 300 K with such a doping. It is associated with decreasing electron scattering by an ionized impurity, which is confirmed by the carried out calculations.

36 MATERIALS SCIENCE↗

Radiation-induced surface degradation of GaAs and high electron mobility transistor structures

Transistor heterostructures with high-carrier-mobility have been studied. It is shown that, as the {gamma}-irradiation dose {Phi} increases, their degradation occurs in the following sequence. (i) At {Phi} < 10{sup 7} rad, the GaAs surface layer is damaged to a depth of 10 nm due to a >0.2-eV decrease in the diffusion energy of intrinsic defects and, probably, atmospheric oxygen. (ii) At {Phi} > 10{sup 7} rad, highly structurally disordered regions larger than 1 {mu}m are formed near microscopic defects or dislocations. (iii) At {Phi} > 10{sup 8} rad, there occurs degradation of the internal AlGaAs/InGaAs/GaAs interfaces and the working channel. An effective method for studying the degradation processes in heterostructures is to employ a set of structural diagnostic methods to analyze processes of radiation-induced and aging degradation, in combination with theoretical simulation of the occurring processes.

36 MATERIALS SCIENCE↗

Persistent photoconductivity and electron mobility in In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As/InP quantum-well structures

The influence of the width of the quantum well L and doping on the band structure, scattering, and electron mobility in nanoheterostructures with an isomorphic In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well grown on an InP substrate are investigated. The quantum and transport mobilities of electrons in the dimensionally quantized subbands are determined using Shubnikov-de Haas effect measurements. These mobilities are also calculated for the case of ionized-impurity scattering taking into account intersub-band electron transitions. It is shown that ionized-impurity scattering is the dominant mechanism of electron scattering. At temperatures T < 170 K, persistent photoconductivity is observed, which is explained by the spatial separation of photoexcited charge carriers.

36 MATERIALS SCIENCE↗

Statistical analysis of AFM topographic images of self-assembled quantum dots

To obtain statistical data on quantum-dot sizes, AFM topographic images of the substrate on which the dots under study are grown are analyzed. Due to the nonideality of the substrate containing height differences on the order of the size of nanoparticles at distances of 1-10 {mu}m and the insufficient resolution of closely arranged dots due to the finite curvature radius of the AFM probe, automation of the statistical analysis of their large dot array requires special techniques for processing topographic images to eliminate the loss of a particle fraction during conventional processing. As such a technique, convolution of the initial matrix of the AFM image with a specially selected matrix is used. This makes it possible to determine the position of each nanoparticle and, using the initial matrix, to measure their geometrical parameters. The results of statistical analysis by this method of self-assembled InAs quantum dots formed on the surface of an AlGaAs epitaxial layer are presented. It is shown that their concentration, average size, and half-width of height distribution depend strongly on the In flow and total amount of deposited InAs which are varied within insignificant limits.

36 MATERIALS SCIENCE↗

Electrical and optical properties of near-surface AlGaAs/InGaAs/AlGaAs quantum wells with different quantum-well depths

A series of AlGaAs/InGaAs/AlGaAs quantum-well heterostructures with different quantum-well depths and approximately the same concentrations of two-dimensional electrons is grown by molecular-beam epitaxy. The built-in electric field in the grown samples is determined from the photoreflectance data and, on this basis, the energy-band structure in the quantum-well region is calculated. It is found that the highest mobility {mu}{sub e} of two-dimensional electrons is attained in the sample with a barrier-layer thickness of L{sub b} = 11 nm. Measurements of the photoluminescence spectra and the band-structure calculations demonstrate that, as the quantum well becomes closer to the surface, the doping profile broadens due to diffusion and segregation processes. The nonmonotonic dependence of {mu}{sub e} on the distance between the surface and the quantum well is explained.

36 MATERIALS SCIENCE↗

Electron microscopy of GaAs-based structures with InAs and As quantum dots separated by an AlAs barrier

Electron microscopy studies of GaAs-based structures grown by molecular beam epitaxy and containing arrays of semiconductor InAs quantum dots and metal As quantum dots are performed. The array of InAs quantum dots is formed by the Stranski-Krastanov mechanism and consists of vertically coupled pairs of quantum dots separated by a GaAs spacer 10 nm thick. To separate the arrays of semiconductor and metal quantum dots and to prevent diffusion-induced mixing, the array of InAs quantum dots is overgrown with an AlAs barrier layer 5 or 10 nm thick, after which a GaAs layer is grown at a comparatively low temperature (180 Degree-Sign C). The array of As quantum dots is formed in an As-enriched layer of the low-temperature GaAs by means of post-growth annealing at 400-760 Degree-Sign C for 15 min. It is established that the AlAs barrier layer has a surface profile corresponding to that of a subbarrier layer with InAs quantum dots. The presence of such a profile causes the formation of V-shaped structural defects upon subsequent overgrowth with the GaAs layer. Besides, it was obtained that AlAs layer is thinned over the InAs quantum dots tops. It is shown that the AlAs barrier layer in the regions between the InAs quantum dots effectively prevents the starting diffusion of excess As at annealing temperatures up to 600 Degree-Sign C. However, the concentration of mechanical stresses and the reduced thickness of the AlAs barrier layer near the tops of the InAs quantum dots lead to local barrier breakthroughs and the diffusion of As quantum dots into the region of coupled pairs of InAs quantum dots at higher annealing temperatures.

36 MATERIALS SCIENCE↗

Specific features of the photoluminescence of HEMT nanoheterostructures containing a composite InAlAs/InGaAs/InAs/InGaAs/InAlAs quantum well

The specific features of the photoluminescence and the electrical properties of doped nanoheterostructures containing a composite InAlAs/InGaAs/InAlAs quantum well with a thin InAs insert in the middle are studied. The insert thickness is varied in the range from 1.7 to 3.0 nm. It is established that the position of the peaks in the photoluminescence spectra in the photon energy range 0.6–0.8 eV correlates with the InAs insert thickness. Simulation of the band structure shows that the experimentally observed variation in the energy of optical transitions is associated with lowering of the energy of electron and hole states in the quantum well with increasing insert thickness. In the photon energy range 1.24–1.38 eV, optical transitions in the region of the InAlAs buffer-InP substrate interface are observed. The signal photon energy and intensity depend on the features of the formation of this heterointerface and on the conditions of substrate annealing. It is conceived that this is due to the formation of a transition region between the InAlAs buffer and the substrate.

36 MATERIALS SCIENCE↗

Identification of photoluminescence bands in AlGaAs/InGaAs/GaAs PHEMT heterostructures with donor-acceptor-doped barriers

The photoluminescence of AlGaAs/InGaAs/GaAs pseudomorphic high-electron mobility transistor heterostructures with donor-acceptor-doped AlGaAs barriers is studied. It is found that the introduction of additional p{sup +}-doped AlGaAs layers into the design brings about the appearance of new bands in the photoluminescence spectra. These bands are identified as resulting from transitions (i) in donor-acceptor pairs in doped AlGaAs layers and (ii) between the conduction subband and acceptor levels in the undoped InGaAs quantum well.

36 MATERIALS SCIENCE↗

Thermal resistance of ultra-small-diameter disk microlasers

The thermal resistance of AlGaAs/GaAs microlasers of the suspended-disk type with a diameter of 1.7–4 μm and InAs/InGaAs quantum dots in the active region is inversely proportional to the squared diameter of the microdisk. The proportionality factor is 3.2 × 10{sup −3} (K cm{sup 2})/W, and the thermal resistance is 120–20°C/mW.

36 MATERIALS SCIENCE↗

Photoluminescence properties of modulation-doped In{sub x}Al{sub 1–x}As/In{sub y}Ga{sub 1–y}As/In{sub x}Al{sub 1–x}As structures with strained inas and gaas nanoinserts in the quantum well

The photoluminescence spectra of modulation-doped InAlAs/InGaAs/InAlAs heterostructures with quantum wells containing thin strained InAs and GaAs inserts are investigated. It is established that the insertion of pair InAs layers and/ or a GaAs transition barriers with a thickness of 1 nm into a quantum well leads to a change in the form and energy position of the photoluminescence spectra as compared with a uniform In{sub 0.53}Ga{sub 0.47}As quantum well. Simulation of the band structure shows that this change is caused by a variation in the energy and wave functions of holes. It is demonstrated that the use of InAs inserts leads to the localization of heavy holes near the InAs layers and reduces the energy of optical transitions, while the use of GaAs transition barriers can lead to inversion of the positions of the light- and heavy-hole subbands in the quantum well. A technique for separately controlling the light- and heavy-hole states by varying the thickness and position of the GaAs and InAs inserts in the quantum well is suggested.

36 MATERIALS SCIENCE↗