Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind-tunnel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Flight Tests on U.S.S. Los Angeles. Part II : Stress and Strength Determination

The tests described in this report furnished data on the actual aerodynamic forces, and the resulting stresses and bending moments in the hull of the U. S. S. "Los Angeles" during as severe still-air maneuvers as the airship would normally be subjected to, and in straight flight during as rough air as is likely to occur in service, short of squall or storm conditions. The maximum stresses were found to be within the limits provided for in accepted practice in airship design. Normal flight in rough air was shown to produce forces and stresses about twice as great as the most severe still-air maneuvers. No light was thrown upon the forces which might occur in extreme or exceptional conditions, such as the storm which destroyed the "Shenandoah". The transverse aerodynamic forces on the hull proper were found to be small and irregular. Owing to the necessity of conserving helium, it was impossible to fly the airship in a condition of large excess of buoyancy or weight in order to determine the air pressure distribution at a fixed angle of pitch. However, there is every reason to believe that in that condition the forces on the actual airship are as close to the wind-tunnel results as can be determined by present type of pressure measuring apparatus. It is considered that most important data obtained are the coefficients of tail-surface forces and hull-bending moments. These are tabulated in this report.

Burgess, C P↗

Airfoil Pressure Distribution Investigation in the Variable Density Wind Tunnel

Report presents the results of wind tunnel tests of pressure distribution measurements over one section each of six airfoils. Pressure distribution diagrams, as well as the integrated characteristics of the airfoils, are given for both a high and a low dynamic scale or, Reynolds number VL/V, for comparison with flight and other wind-tunnel tests, respectively. It is concluded that the scale effect is very important only at angles of attack near the burble. The distribution of pressure over an airfoil having a Joukowski section is compared with the theoretically derived distribution. A further study of the distribution of pressure over all of the airfoils resulted in the development of an approximate method of predicting the pressure distribution along the chord of any normal airfoil for all attitudes within the working range if the distribution at one attitude is known.

Jacobs, Eastman N↗

A Flight Investigation of the Lateral Control Characteristics of Short Wide Ailerons and Various Spoilers with Different Amounts of Wing Dihedral

This report presents the results of flight tests made to determine the lateral control characteristics of short wide ailerons and spoilers, as a consequence of the promise shown in wind-tunnel tests by these devices as means of obtaining lateral control, particularly at angles of attack above the stall. Several forms of spoilers, front-hinge, rear-hinge, plain retractable, and saw-tooth retractable were tested alone and in combination with the ailerons. The tests were made with several different amounts of wing dihedral so that the effect of the yawing moments of the different lateral control combinations, which varied from large negative to large positive values, could be evaluated. In conjunction with the tests, observations were made to throw some light on the feasibility of operating the airplane with two controls instead of the present three.

Weick, Fred E↗

Aerodynamic characteristics of wings with cambered external airfoil flaps, including lateral control, with a full-span flap

The results of a wind-tunnel investigation of the NACA 23012, the NACA 23021, and the Clark Y airfoils, each equipped with a cambered external-airfoil flap, are presented in this report. The purpose of the research was to determine the relative merit of the various airfoils in combination with the cambered flap and to investigate the use of the flap as a combined lateral-control and high-lift device.

Platt, Robert C↗

Summary Report on the High-Speed Characteristics of Six Model Wings Having NACA 65sub1-Series Sections

A summary of the results of wind-tunnel tests to determine the high-speed aerodynamic characteristics of six model wings having NACA 65sub1-series sections is presented in this report. The 8-percent-thick wings were superior to the 10-percent and 12-percent-thick wings from the standpoint of power economy during level flight for Mach numbers above 0.76. However, airplanes that are to fly at Mach numbers below 0.76 will gain aerodynamically if the percentage thickness of the wing and the aspect ratio are both increased. The lift-curve slopes for the 8-percent-thick wings at 0.85 Mach number were roughly twice their low-speed values.

Hamilton, William T↗

Theoretical and Experimental Investigation of the Effect of Tunnel Walls on the Forces on an Oscillating Airfoil in Two-Dimensional Subsonic Compressible Flow

This report presents a theoretical and experimental investigation of the effect of wind-tunnel walls on the air forces on an oscillating wing in two-dimensional subsonic compressible flow. A method of solving an integral equation which relates the downwash on a wing to the unknown loading is given, and some comparisons are made between the theoretical results and the experimental results. A resonance condition, which was predicted by theory in a previous report (NACA report 1150), is shown experimentally to exist. In addition, application of the analysis is made to a number of examples in order to illustrate the influence of walls due to variations in frequency of oscillation, Mach number , and ratio of tunnel height to wing semichord.

Runyan, Harry L↗

Effects of aerodynamic heating on X-15 temperatures

Paper describes examples which show how wind-tunnel model tests of the actual configuration of the aircraft aid in aerothermodynamic analyses and how these tests have made possible increased accuracy in structural temperature prediction. Also, from this and other research, development and design work on the X-15 has been done to accomplish a design consistent with the specified flight requirements. In this work, structural temperatures have been held within acceptable limits by providing sufficient heat sink material. Limited areas of the skin and leading edges are expected to attain temperatures greater than 1,200 degrees F. However, these areas have been carefully investigated for the effect of these higher temperatures on the structure and have been found to be satisfactory.

Kinsler, Martin R↗

Concerning the flow about ring-shaped cowlings Part VI : further measurements on inlet devices

The present report presents as a supplement to the fourth report (available as ATI 5045, Air Materiel Command) in the series of investigations concerning the flow about ring-shaped cowlings further wind-tunnel measurements on inlet devices which are to show the influence of the radius of the nose of the cowling on the flow conditions. Moreover, a simple rule for the design of such arrangements, containing a hub in the interior, is suggested.

AIR FLOW - ENGINE COWLINGS↗

The interdependence of profile drag and lift with Joukowski type and related airfoils

On the basis of a systematic investigation of Gottingen wind-tunnel data on Joukowski type and related airfoils, it is shown in what manner the profile drag coefficient is dependent on the lift coefficient. The individual factors for the construction of the profile drag polars are given. They afford a more accurate calculation of the performance coefficients of airplane designs than otherwise attainable with the conventional assumption of constant drag coefficient.

Muttray, H↗

Aerodynamic Forces and Moments of a Seaplane on the Water

This report gives the results of wind-tunnel tests with a seaplane model as a contribution to the solution of the aerodynamic problems. In the tests it was assumed that the seaplane rested motionless on the water and was exposed, in various positions with respect to the supposedly flat surface of the water, to a uniform air current 0 to 360 degrees.

Kohler, M↗

The effect of a gap between elevator and stabilizer on the static stability and maneuverability about the lateral axis in flight

A number of German airplanes have a gap between elevator and stabilizer. The effect of this open space is not generally known, although English wind-tunnel experiments have shown that even a very small gap exerts a profound influence on the elevator action. The purpose of the present free-flight measurements is to ascertain whether fairing over the gap would actually result in an appreciable improvement.

Hubner, Walter↗

Experimental determination of the thickness of the boundary layer along a wing section

The thickness and course of the boundary layer were measured in flight, in order to determine whether the relations on an airplane and on a shop-made wing can be brought into agreement with the results of wind-tunnel tests and Horst Muller's calculations of the thickness of the boundary layer, as developed from Karman's integral equation for the boundary layer.

Cuno, Otto↗

Increase in the maximum lift of an airplane wing due to a sudden increase in its effective angle of attack resulting from a gust

Wind-tunnel tests are described, in which the angle of attack of a wing model was suddenly increased (producing the effect of a vertical gust) and the resulting forces were measured. It was found that the maximum lift coefficient increases in proportion to the rate of increase in the angle of attack. This fact is important for the determination of the gust stresses of airplanes with low wing loading. The results of the calculation of the corrective factor are given for a high-performance glider and a light sport plane of conventional type.

Kramer, Max↗

Problems concerning the stability and maneuverability of airplanes

The stability of an airplane can be easily determined by wind-tunnel tests, especially by simple tests with models mounted wind-vane fashion. However, each stability curve plotted by this method is valid only for a certain setting of the corresponding control surface, i.e., it characterizes the stability of the airplane with the control stick in a given position. The problems thus defined are studied from the point of view of longitudinal and transverse stability. Directional stability is not included in this study.

Biche, Jean↗

The dangerous flat spin and the factors affecting it

This report deals first with the fundamental data required for the investigation. These are chiefly the aerodynamic forces and moments acting on an airplane in a flat spin. It is shown that these forces and moments depend principally on the angle of attack and on the rotation about the path axis, and can therefore either be measured in a wind tunnel or calculated from wind-tunnel measurements of lift, drag and moment about the leading edge of the wing of an airplane model at rest. The lift, drag and moments about the span axis are so greatly altered by the rapid rotation in a flat spin, that they can no longer be regarded as independent of rotation. No substantial change in the angles of attack and glide occurring in a flat spin is involved. The cross-wind force, as compared with the lift and drag, can be disregarded in a flat spin.

Fuchs, Richard↗

Tests of a Northrop XSSM-A-3 Missile in the Ames 40- by 80-Foot Wind Tunnel: Stability and Control

This report presents the results of wind-tunnel force tests which were conducted to determine the low-speed stability and control characteristics of a full-scale Northrop XSSM-A-3 missile. Tests were made through a range of angles of attack, sideslip, and control deflection, and at various Reynolds numbers. Characteristics of the complete missile are compared with the characteristics of the missile with the landing skids extended, with the vertical tail removed, and with the fuselage alone. No analysis of the data has been made in order to make the results available as soon as possible.

Maki, Ralph L.↗

New Research on the Cowling and Cooling of Radial Engines

An extensive series of wind-tunnel tests on a half-scale conventional, nacelle model were made by the United Aircraft Corporation to determine and correlate the effects of many variables on cooling air flow and nacelle drag. The primary investigation was concerned with the reaction of these factors to varying conditions ahead of, across, and behind the engine. In the light of this investigation, common misconceptions and factors which are frequently overlooked in the cooling and cowling of radial engines are considered in some detail. Data are presented to support certain design recommendations and conclusions which should lead toward the improvement of present engine installations. Several charts are included to facilitate the estimation of cooling drag, available cooling pressure, and cowl exit area.

Molloy, Richard C.↗

Coherence Analysis of the Space Launch System using Unsteady Pressure Sensitive Paint

Transonic buffet during atmospheric ascent is a major source of unsteady loading on launch vehicles that, in the past, has led to structural failures. Thus, determining accurate buffet forcing functions (BFFs) to properly predict the vehicle response to buffet is of vital importance in launch vehicle design. The state of the art for obtaining the BFFs relies on wind-tunnel tests where the fluctuating pressures are measured by pressure transducers (PTs) at sparse locations on a rigid, geometrically-scaled buffet model. To compute the BFFs, the outer mold line (OML) of the vehicle is mapped onto contiguous panels centered at the location of the PTs and the measured fluctuating pressures are integrated over the panels’ areas. To mitigate conservatism due to the assumption that the measured buffet pressures act in phase across each panel, coherence factors are applied, effectively reducing the integration areas and, therefore, the buffet forces. For coherence factors to provide the proper level of BFF attenuation, accurate knowledge of the spatial and temporal correlation of the buffet pressures is paramount. Unfortunately, even with hundreds of unsteady pressure transducers instrumenting the models, compromises must be made on the spatial resolution of the PTs. Typically, the PT layout aims at resolving the pressure correlation along the longitudinal axis of the vehicle, assuming that coherent structures propagate mostly in the longitudinal direction. As a result, the distribution of azimuthal/cross-stream correlation is not well known and its impact on the estimated BFFs is often neglected. To fill this and other knowledge gaps, extremely high spatial-resolution uPSP data were collected for three different production-design configurations of the Space Launch System in the NASA Ames Research Center Unitary Plan Wind Tunnel 11-Foot Transonic Wind Tunnel. Specifically, two cargo configurations, the Block 1 and Block 1B, and one crew configuration, the Block 1B crew, were surveyed at resolutions ranging from 600,000 to over 1 million uPSP measurement locations. To shed light on the temporal and spectral behavior of are presented. Several OML regions and flow features of interest are investigated, from theexpansion/shock on the Orion Multi-Purpose Crew Vehicle, to the terminal shock environment on the core stage, and the Strouhal shedding behind the boosters forward attach. The sensitivity of these environments to the vehicle attitude is examined. Furthermore, for selected panels,coherence factors that accurately capture the azimuthal coherence distribution of the buffetpressures are derived and their impact on the estimated BFFs is discussed. Finally, distributions of the local convection velocity and cross spectrum phase are presented.

buffet↗