Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “viz”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Soft X-ray observations of two BL Lacertae objects - Markarian 421 and 501

This paper reports on the soft X-ray (0.15-2.8 keV) observations of two BL Lacertae-type objects, viz., Mrk 421 and Mrk 501. The observations were made with the low-energy detectors on the HEAO 1 satellite during the period 1977 August-1978 December. Steep, soft X-ray power-law spectra with photon index Gamma = 3 are found for both Mrk 421 and Mrk 501. The power-law models are found to give a significantly better fit than the thermal models to the observed pulse-height spectra of Mrk 421 and Mrk 501. Day-to-day soft X-ray (0.25 keV band) intensity variations are observed only in Mrk 501. No significant change is found in Gamma from both the BL Lac objects during the period of observations. However, the sum of all the X-ray observations from 1976 until 1980 can be understood in terms of two spectral components of variable intensity to account for the X-ray emission observed between 0.15 and 20 keV from Mrk 421 and Mrk 501.

Singh, K. P.↗

High-temperature thermoelectric energy conversion. II - Materials survey

The current status of materials research for high-temperature thermoelectric energy conversion is reviewed. Two general classes of materials show promise for high temperature figure of merit (Z) values, viz, the rare-earth chalcogenides and the boron-rich borides. The electronic transport properties of the rare-earth chalcogenides are explicable on the basis of degenerate or partially degenerate n-type semiconductors. Boron and boron-rich borides exhibit p-type hopping conductivity, with detailed explanations proposed for the transport differing from compound to compound. Some discussion is presented on the reasons for the low thermal conductivities in these materials. Also, ZTs greater than one appear to have been realized at high temperature in many of these compounds.

Wood, C.↗

The alpha dynamo parameter and measurability of helicities in magnetohydrodynamic turbulence

Alpha, an important parameter in dynamo theory, is shown to be proportional to either the kinetic, current, magnetic, or velocity helicities of the fluctuating magnetic field and fluctuating velocity field. The particular helicity to which alpha is proportional depends on the assumptions used in deriving the first-order smoothed equations that describe the alpha effect. In two cases, viz., when alpha is proportional to either the magnetic helicity or velocity helicity, alpha can be determined experimentally from two-point measurements of the fluctuating fields in incompressible, homogeneous turbulence with arbitrary rotational symmetry. For the other two possibilities, alpha can be determined if the turbulence is isotropic.

Matthaeus, W. H.↗

Magnetohydrodynamic solitons and radio knots in jets

Weakly nonlinear surface waves are examined in the context of the beam model for jetlike radio sources. By introducing a finite scale length, viz. the beam radius, geometrical dispersion can act to balance nonlinear wave growth and thereby produce solitons, localized wave packets of stable waveform. A method for obtaining a soliton equation from the MHD equations is presented and then applied to radio knots in jets.

Fiedler, R.↗

A look at profiler performance

Since about 1974, Doppler radars operating in UHF and VHF ranges have been used increasingly to study atmospheric winds. Historically, large systems capable of obtaining data from high altitudes have focused attention on the mesosphere and stratosphere, rather than on the troposphere wherein abides most of the weather considered by most meteorologists. Research address some questions the meteorologist must logically ask first, viz., what is the actual performance capability of these systems, how accurate is the wind data of interest to meteorologists, and from what altitudes in the troposphere are the data reliably obtained.

Kessler, E.↗

Evidence of atmospheric gravity wave perturbations of the Brunt-Vaisala frequency in the atmosphere

A series of high altitude, medium resolution, measurements of temperature, pressure and turbulence have been performed by the Air Force Geophysics Laboratory. These measurements were conducted using the VIZ Manufacturing Co. microsondes with attached micro-thermal probes measuring the temperature structure coefficient. A typical atmospheric temperature measurement is given. Several small temperature inversions are evident in the troposphere. The stratosphere is marked with numerous fluctuations in the temperature profile. Microsondes provide temperature and pressure measurements every 4 seconds up to a maximum altitude of 30 km (MSL). Since the average ascent rate is 5 m/s, the altitude interval between the measurement reports is 20 m. The potential temperature is calculated from the temperature and pressure. Spectral analysis of atmospheric Brunt-Vaisala frequencies reveal spectra similiar to the velocity spectra of Dewan et al. (1984), Daniels (1982), and Endlich and Singleton (1969). The Brunt-Vaisala spectra indicate the existence of separate, distinguishable wave modes.

Good, R. E.↗

Preliminary estimates of radiosonde thermistor errors

It has been long realized that radiosonde temperature measurements are subject to errors, not the least of which is the effect of long- and short-wave radiation. Methods of adjusting the daytime temperatures to a nighttime equivalent temperature were developed a number of years ago, and are used by some analysis centers. Other than providing consistent observations for analysis this procedure does not provide a true correction. The literature discusses the problem of radiosonde temperature errors but it is not apparent what effort, if any, has been taken to quantify these errors. In order to quantify this radiation error, radiosondes containing multiple thermistors with different coatings were flown at Goddard Space Flight Center/Wallops Flight Facility. The coatings employed had different spectral characteristics and, therefore, different absorption and emissivity properties. Discrimination of the recorded temperatures enabled day and night correction values to be determined for the US standard white-coated rod thermistor. The correction magnitudes are given and a comparison of US measured temperatures before and after correction are compared with temperatures measured with the Vaisala radiosonde. The US and Vaisala radiosonde data are from the recently completed WMO International Radiosonde Intercomparison held at Wallops. The corrections are in the proper direction, day and night, and reduce day-night temperature differences to less than 0,5°C between surface and 30 hPa. The present uncorrected temperatures used with the Viz radiosonde have day-night differences that exceed 1°C at levels below 90 hPa. Additional measurements are planned to confirm these preliminary results and determine the solar elevation angle effect on the corrections. The technique used to obtain the corrections may also be used to recover a true 'absolute' value and might be considered a valuable contribution to the meteorological community for use as a reference instrument.

Temperature measurement↗

Systematic identification of IRAS point sources

A large scale program was initiated to identify IRAS point sources. At ROE the ideal facilities are at hand to undertake such a large program, viz. the rapid scanning capabilities of the COSMOS measuring machine to exploit the depth and resolution of the U.K. Schmidt Telescope J survey plates. Sources in 44 Schmidt plate areas were identified including 1300 sources and covering 1100 square degrees. The identification comprise 700 galaxy identifications and 600 stellar identifications. There are also about 40 sources with no obvious identification but which can be most easily explained by cirrus, confusion between two sources or sources just outside the 2 sigma error box. A major aim with the galaxy identification is to provide a data base from which sound statistical analyses can be made. Accurate blue magnitudes and morphological classifications for each identification were produced.

Savage, A.↗

Variational approach to probabilistic finite elements

Probabilistic finite element method (PFEM), synthesizing the power of finite element methods with second-moment techniques, are formulated for various classes of problems in structural and solid mechanics. Time-invariant random materials, geometric properties, and loads are incorporated in terms of their fundamental statistics viz. second-moments. Analogous to the discretization of the displacement field in finite element methods, the random fields are also discretized. Preserving the conceptual simplicity, the response moments are calculated with minimal computations. By incorporating certain computational techniques, these methods are shown to be capable of handling large systems with many sources of uncertainties. By construction, these methods are applicable when the scale of randomness is not very large and when the probabilistic density functions have decaying tails. The accuracy and efficiency of these methods, along with their limitations, are demonstrated by various applications. Results obtained are compared with those of Monte Carlo simulation and it is shown that good accuracy can be obtained for both linear and nonlinear problems. The methods are amenable to implementation in deterministic FEM based computer codes.

Belytschko, T.↗

Parallel acceleration and transport of ions from polar ionosphere to plasma sheet

The effect of the convection electric field in accelerating ions that escape from the polar ionosphere is investigated. It is shown that at high altitudes the velocity component of the ions along the magnetic field may be increased by more than an order of magnitude. The highest velocities are acquired by ions that escape from the region of the ionosphere that is connected along magnetic field lines to the dayside cusps. During disturbed times, ions from that region intercept the center plane of the magnetotail in one to two hours at radial distances exceeding about 6 earth radii. Investigation of the resulting O(+) properties in the center plane, viz., their locations, number densities, and energies, indicates that the polar ionosphere near the cusps is the principal source of the O(+) observed in the plasma sheet. Moreover, a study of the ion motion at quiet and disturbed times indicates that the increase of O(+) in the plasma sheet with increasing AE values (Lennartsson and Shelley, 1986) is due mainly to an increase in the source of O(+) rather than alteration of its transport path.

Cladis, J. B.↗

Definition of an auxiliary processor dedicated to real-time operating system kernels

In order to increase the efficiency of process control data processing, it is necessary to enhance the productivity of real time high level languages and to automate the task administration, because presently 60 percent or more of the applications are still programmed in assembly languages. This may be achieved by migrating apt functions for the support of process control oriented languages into the hardware, i.e., by new architectures. Whereas numerous high level languages have already been defined or realized, there are no investigations yet on hardware assisted implementation of real time features. The requirements to be fulfilled by languages and operating systems in hard real time environment are summarized. A comparison of the most prominent languages, viz. Ada, HAL/S, LTR, Pearl, as well as the real time extensions of FORTRAN and PL/1, reveals how existing languages meet these demands and which features still need to be incorporated to enable the development of reliable software with predictable program behavior, thus making it possible to carry out a technical safety approval. Accordingly, Pearl proved to be the closest match to the mentioned requirements.

Halang, Wolfgang A.↗

Computational simulation of turbulent flow in Space Shuttle Main Engine turnaround ducts

Two axisymmetric 180-deg turnaround ducts are used in the Space Shuttle Main Engine (SSME) to connnect the preburners with the main thrust chamber. The prediction of the flow field and heat transfer within the turnaround ducts is important to minimize the pressure drops, size of recirculation and stagnation zones, local overheating, etc. This paper presents the computational approach and selected results for the turbulent flow in the turnaround ducts of the fuel and oxidizer sides of the SSME. The time-averaged, Navier-Stokes equations for the viscous, compressible, turbulent flow are solved in body-fitted-coordinates by using a finite-volume approach. Two turbulence models, viz: the k-epsilon model and a multiple scale turbulence model, are used to examine the sensitivity of calculated flows. Both models produce almost identical solutions for the fuelside turnaround duct (which has no recirculation region). However, for the oxidizer-side duct which has a large recirculation region, the two models show quite different results.

Przekwas, Andrzej J.↗

An approach to simultaneous system design. II - Nonswitching gain and dynamic feedback compensation by algebraic geometric methods

This paper studies structured uncertainty problems in feedback system design, considers a compact parameterization of the space of linear dynamical systems and introduces 'base points' and 'critical points' as two algebraic-geometric objects that have significance in sensitivity and robustness studies, respectively. Using the Nevanlinna-Pick interpolation theory, the author obtains a necessary and sufficient condition for simultaneous stabilization of a structured one-parameter family of plants. A recent result due to Kharitonov, on the simultaneous stability of a parameterized family of polynomials, leads to a sufficiency condition for simultaneous stabilization of a structured multiparameter family of plants. Furthermore, the author considers 'simultaneous pole placement' of an r-tuple of plants as a means to arbitrarily tune the natural frequencies of a multimode linear dynamical system. The concept of 'nondegenerate' and 'twisted' r-tuples of plants is introduced as the pole placement problem is studied via Schubert enumerative geometry as an intersection problem on the associated Grassmannian. Various other design problems, viz., the strong stabilization problem and the dead beat control problem, are also considered.

Ghosh, Bijoy K.↗

Performance limitations in parallel processor simulations

A jet-engine model is partitioned and simulated on a parallel processor system consisting of five 8086/8087 floating-point computers. The simulation uses Heun's integration method. A near-optimal parallel simulation (in the sense of minimum execution time) achieves speedup of only 2.13 and efficiency of 42.6 percent, in effect wasting 57.4 percent of the available processing power. A detailed analysis identifies and graphically demonstrates why the system fails to achieve ideal performance (viz., speedup of 5 and efficiency of 100 percent). Inherent characteristics of the problem equations and solution algorithm account for the loss of nearly half of the available processing power. Overheads associated with interprocessor communication and processor synchronization account for only a small fraction of the lost processing power. The effects of these and other factors which limit parallel processor performance are illustrated through real-time timing-analyzer tracers describing the run/idle status of the parallel processors during the simulation.

O'Grady, E. Pearse↗

Passive films on magnesium anodes in primary batteries

The characteristics of the passive films over Mg anodes, which essentially govern the voltage delay of the latter, have been determined nondestructively from an analysis of the transient and steady-state response of the electrode potential to low amplitude galvanostatic polarization under various experimental conditions viz., with different corrosion inhibitor coatings on Mg, after various periods of ageing of anode in solutions containing corrosion inhibitors, at various low temperatures etc. Using these parameters, the kinetics of film build-up or dissolution under these conditions have been monitored. The morphology of the anode film has been verified with scanning electron microscopy. Similar transients at low temperatures point out a steep rise in the film resistivity which is essentially responsible for the severe voltage delay. Finally, possible application of this technique in secondary Li batteries to improve cycling characteristics of the Li anode has been pointed out.

Ratnakumar, B. V.↗

Antarctic polar stratospheric aerosols: The roles of nitrates, chlorides and sulfates

Nitric and hydrochloric acids have been postulated to condense in the winter polar stratosphere to become an important component of polar stratospheric clouds. One implication is that the removal of NO(y) from the gas phase by this mechanism allows high Cl(x) concentrations to react with O3, because the formation of ClNO3 is inhibited. Contributions of NO3 and Cl to the stratospheric aerosol were determined during the 1987 Airborne Antarctic Ozone Experiment by testing for the presence of nitrates and chlorides in the condensed phase. Aerosol particles were collected on four 500 micron diameter gold wires, each pretreated differently to give results that were specific to certain physical and chemical aerosol properties. One wire was carbon-coated for concentration and size analyses by scanning electron microscopy; X-ray energy dispersive analyses permitted the detection of S and Cl in individual particles. Three more wires were coated with Nitron, barium chloride and silver nitrate, respectively, to detect nitrate, sulfate and chloride in aerosol particles. All three ions, viz., sulfates, nitrates and chlorides were detected in the Antarctic stratospheric aerosol. In terms of number concentrations, the aerosol was dominated by sulfates, followed by chlorides and nitrates. An inverse linear regression can be established between nitrate concentrations and ozone mixing ratio, and between temperature and nitrates.

Pueschel, R. F.↗

Tectonic evolution of the Archaean high-grade terrain of South India

The southern Indian shield consists of three major tectonic provinces viz., (1) Dharwar Craton, (2) Eastern Ghat Mobile Belt, and (3) Pandyan Mobile Belt. An understanding of their mutual relations is crucial for formulating crustal evolution models. The tectonic evolution of these provinces is summarized.

Ramakrishnan, M.↗

Rapid solidification of Nb-base alloys

New Nb-base alloys are of interest for aerospace structural applications at high temperatures, viz, 800 to 1650 C. Fundamental information regarding the effects of rapid solidification in achieving greatly refined microstructures, extended solid solubility, suppression of embrittling equilibrium phases, and formation of new phases is desired in a number of Nb-X alloys. The microstructures and selected properties of Nb-Si and other Nb-base alloys are presented for materials both rapidly quenched from the equilibrium liquidus and rapidly solidified following deep supercooling. Electromagnetic levitation was used to achieve melting and supercooling in a containerless inert gas environment. A variety of solidification conditions were employed including splatting or drop casting of supercooled samples. The morphology and composition of phases formed are discussed in terms of both solidification history and bulk composition.

Gokhale, A. B.↗