Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “torque control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Brushless Excitation for Wound-field Synchronous Machines using Multi-harmonic Windings

Wound-field synchronous machines (WFSM) are promising alternatives to electric machines with permanent magnets (PM). The ability to control the rotor field in these machines makes them well-suited to safety critical applications, while the absence of rare-earth permanent magnets makes these machines sustainable. The WFSM rotor excitation schemes have traditionally used carbon brushes, which significantly reduces the reliability of these machines, limiting their widespread adoption. To overcome this limitation and improve the reliability of WFSMs, several brushless rotor excitation schemes have been developed. However, most of these systems require additional windings or dedicated power electronics, making them expensive and limiting achievable power-density. In this paper a new brushless excitation scheme is proposed. In this scheme, a multiphase, multi-harmonic stator winding is designed. This winding can independently control two spatial harmonics in the airgap of the machine; the first to create torque and the second to wirelessly transfer power to the rotor to excite it.

Gadiyar, Nishanth [ORNL] (ORCID:0000000348267524)↗
DOE OSTI2023

Large Spin-Orbit-Torque Efficiency and Room-Temperature Magnetization Switching in Sr Ir O 3 / Co-Fe-B Heterostructures

Spin-orbit-torque (SOT) switching is a potentially energy-efficient mechanism by which electrical current can control magnetization. We demonstrate room-temperature SOT switching in nanometer-thick Co⁢Fe⁢B/Sr⁢Ir⁢O 3 bilayers despite the amorphous nature of CoFeB and the interface. This behavior is attributed to the large spin Hall angle in Sr⁢Ir⁢O 3 as well as high spin transmission at the interface that contribute to the SOT efficiency ξ SOT . Our bilayers exhibit large ξ SOT of up to 1.4 and effective spin Hall conductivity of 0.9 ×10 5 (ℏ/2e)Ω –1 ⁢m –1 . In our bilayers, we observe unidirectional magnetoresistance and current-induced magnetization switching with a low critical current density of 1.38 ×10 10 A/m 2 at room temperature. Finally, our results are promising for heterostructures combining technologically relevant CoFeB with high spin-orbit-coupling oxides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Controlling the helicity of light by electrical magnetization switching

Controlling the intensity of emitted light and charge current is the basis of transferring and processing information. By contrast, robust information storage and magnetic random-access memories are implemented using the spin of the carrier and the associated magnetization in ferromagnets. In this study, the missing link between the respective disciplines of photonics, electronics and spintronics is to modulate the circular polarization of the emitted light, rather than its intensity, by electrically controlled magnetization. Here we demonstrate that this missing link is established at room temperature and zero applied magnetic field in light-emitting diodes through the transfer of angular momentum between photons, electrons and ferromagnets. With spin-orbit torque a charge current generates also a spin current to electrically switch the magnetization. This switching determines the spin orientation of injected carriers into semiconductors, in which the transfer of angular momentum from the electron spin to photon controls the circular polarization of the emitted light. The spin-photon conversion with the nonvolatile control of magnetization opens paths to seamlessly integrate information transfer, processing and storage. Our results provide substantial advances towards electrically controlled ultrafast modulation of circular polarization and spin injection with magnetization dynamics for the next-generation information and communication technology, including space-light data transfer. The same operating principle in scaled-down structures or using two-dimensional materials will enable transformative opportunities for quantum information processing with spin-controlled single-photon sources, as well as for implementing spin-dependent time-resolved spectroscopies.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Coordinated Steering Angle and Yaw Moment Distribution to Increase Vehicle Regenerative Energy in Autonomous Driving

This paper presents an algorithm that increases vehicle regenerative braking energy recovery in autonomous driving by leveraging connected and automated vehicle (CAV) technology. Autonomous vehicles may select different maneuvers to increase kinetic energy recovery during deceleration. In the proposed algorithm, the cornering resistance that influences regenerative energy and energy consumption is defined in terms of steering angle during regenerative braking. In particular, a model predictive controller that distributes control inputs of the vehicle is adopted to reduce the cornering resistance for increasing regenerative braking torque. Utilizing the information from CAV technology, this algorithm enables the vehicle to safely conduct braking while increasing its regenerative energy recovery. CarSim-Simulink joint simulations demonstrate the effectiveness of the proposed method.

Choi, Junghyun↗
DOE OSTI2025

Emergent properties of magnons coupled to microwave photons (Final Technical Report)

Studying the emergent properties of hybrid quantum material platforms holds great promise for advancing quantum technologies and transforming our ability to control quantum mechanical interactions. A key development in recent years is the recognition that magnons – the elementary quanta of spin waves – can serve as fundamental building blocks in quantum systems. Understanding the mechanisms behind the generation and control of hybrid quasiparticles based on magnons could pave the way for engineering new materials for quantum coherent processing and quantum computing. This research project focused on the precise control of light-matter interactions in magnetic hybrid systems and nanostructures, where light is carried by microwave photons and matter by magnons in engineered magnetic metamaterials. Furthermore, we investigated hybridized magnon interactions in magnetic nanostructures and devices. To this end, the project has developed new measurement techniques and systematically studied novel material systems for efficient magnon-photon coupling. A key focus was uncovering the fundamental mechanisms governing magnon-photon and magnon-phonon interactions – critical for utilizing magnons as coherent information transducers between carriers. Specifically, this research addressed: 1. Investigate the dispersion and collective properties of magnon hybrid systems in new material systems. 2. Develop magnonic hybrids with non-zero wavevectors and achieve effective control of magnon-polariton properties through engineered magnonic behaviors. 3. Determine how spin-orbit torques interact with electromagnetic fields in the strong coupling regime. This work generated new insights into the physics of magnonic hybrid systems and their emergent properties by broadening the range of material platforms and measurement techniques used to study magnon-photon and magnon-magnon coupling. The findings deepen our understanding of magnon-polaritons and lay the groundwork for novel spintronic devices with potential applications in quantum information science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Ultrafast Control of Interfacial Exchange Coupling in Ferromagnetic Bilayer

Fast spin manipulation in magnetic heterostructures, where magnetic interactions between different materials often define the functionality of devices, is a key issue in the development of ultrafast spintronics. Although recently developed optical approaches such as ultrafast spin-transfer and spin–orbit torques open new pathways to fast spin manipulation, these processes do not fully utilize the unique possibilities offered by interfacial magnetic coupling effects in ferromagnetic multilayer systems. Here, ultrafast optically controlled interfacial exchange interactions in the ferromagnetic Co 2 FeAl/(Ga,Mn)As system at low laser fluence levels are experimentally demonstrated. The excitation efficiency of Co 2 FeAl with the (Ga,Mn)As layer is 30–40 times higher than the case with the GaAs layer at 5 K due to the modification of exchange coupling interaction via photoexcited charge transfer between the two ferromagnetic layers. In addition, the coherent spin precessions persist to room temperature, excluding the drive of pump-modulated magnetization in the (Ga,Mn)As layer and indicating a proximity-effect-related optical excitation mechanism. The results highlight the importance of interfacial exchange interactions in ferromagnetic heterostructures and how these magnetic coupling effects can be utilized for ultrafast, low-power spin manipulation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unconventional fieldlike spin torques in CrPt 3

The topological semimetal CrPt 3 has potential for generating unconventional spin torques due to its ferrimagnetic ordering, topological band structure, and high anomalous Hall effect. CrPt 3 exhibits ferrimagnetic behavior only in its chemically ordered phase and is paramagnetic in its chemically disordered phase. By controlling the growth and annealing temperatures, we prepare epitaxial films of both chemically ordered and chemically disordered phases of CrPt 3 , allowing us to investigate the effect of magnetic ordering on unconventional-torque generation. We use angle-dependent spin-torque-ferromagnetic-resonance and second-harmonic Hall measurements to probe the spin torques generated from epitaxial CrPt 3 in CrPt 3 /Cu/Ni 81 ⁢Fe 19 heterostructures. With current applied along specific directions with respect to the crystal order, we reveal unconventional spin torques in both ordered and disordered films. When current flows parallel to the [$1\bar{1}1$] and [ $\bar{1}11$] directions, we observe an unconventional fieldlike torque that is opposite in sign for the two directions. Finally, our calculations reveal that this unconventional torque originates from an indirect nonlocal spin-orbit torque due to spin scattering at the CrPt 3 /Cu interface, in addition to symmetry breaking at this interface.

ferromagnetic resonance↗
DOE OSTI2023

Electric and Hydraulic Propel Torque Modulation for a Compact Track Loader With the Hybrid Hydraulic Electric Architecture (HHEA)

Abstract The Hybrid Hydraulic Electric Architecture (HHEA) has previously been proposed for off-highway vehicles to reap the efficiency and controllability benefits of electrification without needing very large electric motors. This is achieved with the use of a set of selectable common pressure rails to transmit the majority of power and small electric motors to modulate that power. Previous work has shown significant energy savings for the work circuits of a variety of machines. In this paper, the energy saving potential of HHEA for the propel circuit of a compact track loader is studied. The ports of the track hydraulic motors are selectably connected to the common pressure rails, and instead of using the electric assist motors to buck/boost pressure, as in HHEA for linear actuators, small electric assist motors are used to add/subtract torque directly. The interplay between the torque limits of the electric motors and the ability of the hydraulic motor to vary displacements is studied, along with the effect these factors have on energy saving potential. It is found that the ability to vary the displacement of the hydraulic motor allows for: more efficient electric motor operating conditions, reduced electric torque requirement, and reduced pressure rail switching events. All three of these advantages can be achieved at once using variable displacements; but trade-offs exist between these advantages (i.e. improved efficiency can be achieved at the expense of a larger electric torque requirement). Overall, the HHEA can reduce energy consumption by ∼ 36% compared to the stock machine, depending on the hydraulic motor’s ability to vary displacements, and assuming the electric motor torque is limited to 20% of that required in a direct electrification scheme.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Wave Energy Power Take-off Validation with a Hydraulicly Actuated Rotary Dynamometer and a Bi-Directional High-Power DC Supply

There are many organizations working towards the commercialization of wave energy converter technologies and are advancing their designs through the technology readiness levels (TRLs). A critical step before the field deployment of prototype wave energy converters is the validation of the subsystems and components that are contained in the wave energy converter through laboratory testing and performance characterization. In 2021, the National Renewable Energy Laboratory (NREL) developed and demonstrated a system for testing power takeoffs (PTO) with a low-speed, high-torque dynamometer and a grid-tied high-power DC power source and sink before field deployment. The hydraulic dynamometer allows for the simulation of PTO actuation from wave motion and is capable of a wide range of wave periods and heights which are represented as various speeds and torques from the dynamometer. The high-power bidirectional power supply allows for hardware in the loop and controller in the loop testing to be conducted on WEC power electronics. This presentation was made to describe the methods used by NREL research staff to test all components and sub-systems in the PTO of a novel wave energy converter before field deployment.

dynamometer↗
DOE OSTI2023

Wave Energy Power Take-Off Validation with a Hydraulicly Actuated Rotary Dynamometer and a Bidirectional High-Power DC Supply: Preprint

There are many organizations working towards the commercialization of wave energy converter technologies and are advancing their designs through the technology readiness levels (TRLs). A critical step before the field deployment of prototype wave energy converters is the validation of the subsystems and components that are contained in the wave energy converter through laboratory testing and performance characterization. In 2021, the National Renewable Energy Laboratory (NREL) developed and demonstrated a system for testing power takeoffs (PTO) with a low-speed, high-torque dynamometer and a grid-tied high-power DC power source and sink before field deployment. The hydraulic dynamometer allows for the simulation of PTO actuation from wave motion and is capable of a wide range of wave periods and heights which are represented as various speeds and torques from the dynamometer. The high-power bidirectional power supply allows for hardware in the loop and controller in the loop testing to be conducted on WEC power electronics. This presentation was made to describe the methods used by NREL research staff to test all components and sub-systems in the PTO of a novel wave energy converter before field deployment.

dynamometer↗
DOE OSTI2025

A molecular conveyor belt-associated protein controls the rotational direction of the bacterial type 9 secretion system

ABSTRACT Many bacteria utilize the type 9 secretion system (T9SS) for gliding motility, surface colonization, and pathogenesis. This dual-function motor supports both gliding motility and protein secretion, where rotation of the T9SS plays a central role. Fueled by the energy of the stored proton motive force and transmitted through the torque of membrane-anchored stator units, the rotary T9SS propels an adhesin-coated conveyor belt along the bacterial outer membrane like a molecular snowmobile, thereby enabling gliding motion. However, the mechanisms controlling the rotational direction and gliding motility of T9SS remain elusive. Shedding light on this mechanism, we find that in the gliding bacteriumFlavobacterium johnsoniae, deletion of the C-terminus of the conveyor belt-associated protein GldJ controls and, in fact, reverses the rotational direction of T9SS from counterclockwise (CCW) to clockwise (CW). This suggests that the interface between the conveyor belt-associated protein GldJ and the T9SS ring protein GldK plays an important role in controlling the directionality of T9SS, potentially by modulating its interaction with the stator complex GldLM, which drives motor rotation. Combined with MD simulation of the T9SS stator units GldLM, we suggest a “tri-component gearset” model where GldJ controls the rotational direction of its driver, the T9SS, thus providing adaptive sensory feedback to influence the motility of the gliding bacterium. IMPORTANCE The type 9 secretion system (T9SS) is fundamental to bacterial gliding motility, pathogenesis, and surface colonization. Our findings reveal that the C-terminal region of the conveyor belt-associated protein GldJ functions as a molecular switch which is capable of reversing the rotational direction of T9SS. Through the coordinated actions of the T9SS stator units (akin to a driving motor), the GldK ring (the gear that converts rotational energy into linear movement), and GldJ, this machinery forms a smart conveyor belt system reminiscent of flexible or cognitive mechanical conveyors. Such advanced conveyors can alter their direction to adapt to shifting demands. Here, we show that the bacterial T9SS similarly adjusts its rotational bias based on feedback from the conveyor belt-associated protein GldJ. This dual-role feedback mechanism underscores an evolved, controllable biological snowmobile, offering new avenues for studying how bacteria fine-tune motility in dynamic environments.

Microbiology↗
DOE OSTI2021

Dynamic Symmetry Breaking in Chiral Magnetic Systems

The Dzyaloshinskii–Moriya interaction (DMI) in magnetic systems stabilizes spin textures with preferred chirality, applicable to next-generation memory and computing architectures. In perpendicularly magnetized heavy-metal/ferromagnet films, the interfacial DMI originating from structural inversion asymmetry and strong spin-orbit coupling favors chiral Néel-type domain walls (DWs) whose energetics and mobility remain at issue. Thus, a new effect is characterized in which domains expand unidirectionally in response to a combination of out-of-plane and in-plane magnetic fields, with the growth direction controlled by the in-plane field strength. These growth directionalities and symmetries with applied fields cannot be understood from static treatments alone. The authors theoretically demonstrate that perpendicular field torques stabilize steady-state magnetization profiles highly asymmetric in elastic energy, resulting in a dynamic symmetry breaking consistent with the experimental findings. This phenomenon sheds light on the mechanisms governing the dynamics of Néel-type DWs and expands the utility of field-driven DW motion to probe and control chiral DWs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Probabilistic locked mode predictor in the presence of a resistive wall and finite island saturation in tokamaks

We present a framework for estimating the probability of locking to an error field in a rotating tokamak plasma. This leverages machine learning methods trained on data from a mode-locking model, including an error field, resistive magnetohydrodynamics modeling of the plasma, a resistive wall, and an external vacuum region, leading to a fifth-order ordinary differential equation (ODE) system. It is an extension of the model without a resistive wall introduced by Akçay et al. [Phys. Plasmas 28, 082106 (2021)]. Tearing mode saturation by a finite island width is also modeled. We vary three pairs of control parameters in our studies: the momentum source plus either the error field, the tearing stability index, or the island saturation term. The order parameters are the time-asymptotic values of the five ODE variables. Normalization of them reduces the system to 2D and facilitates the classification into locked (L) or unlocked (U) states, as illustrated by Akçay et al., [Phys. Plasmas 28, 082106 (2021)]. This classification splits the control space into three regions: L̂, with only L states; Û, with only U states; and a hysteresis (hysteretic) region Ĥ, with both L and U states. In regions L̂ and Û, the cubic equation of torque balance yields one real root. Region Ĥ has three roots, allowing bifurcations between the L and U states. The classification of the ODE solutions into L/U is used to estimate the locking probability, conditional on the pair of the control parameters, using a neural network. We also explore estimating the locking probability for a sparse dataset, using a transfer learning method based on a dense model dataset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Performance Evaluation of Three RTU Energy Efficiency Technologies

This project was part of an effort by CLEAResult and ComEd to evaluate the energy saving potential of emerging technologies in the Chicago area. This project focused on evaluating emerging technologies related to rooftop units (RTUs). An RTU with a single-stage compressor and a constant-speed fan with an induction motor was selected as the baseline for technology comparison. Three retrofit strategies were investigated. The first two involved replacing the single-stage compressor of an RTU by either a two-stage or variable-speed compressor and adding a variable frequency drive (VFD) to the constant speed fan. The use of a multi-/variable-stage compressor improves the part-load efficiency of the compressor which will ultimately result in annual energy savings as well as peak demand shaving in some cases where the design capacity of the RTU is larger than the maximum cooling load of the building space that it is serving. The third technology was the use of a high rotor pole switched reluctance motor (SRM) as a replacement for the constant-speed supply fan. The SRM was applied in single-speed, two-stage and variable-speed compressor RTUs. SRM motors run via reluctance torque. Their stator poles are driven by direct current (DC) power and require an inverter as well as active control when using alternating current (AC) power. This inherent property results in high efficiency over a range of operating conditions. It also exhibits higher efficiency compared to variable frequency drives (VFDs) since its switching frequency is much slower (SCE, 2018).The three technologies investigated are summarized below: 1) Replacing the single-speed compressor with a two-stage compressor and adding a VFD to the supply fan. 2)Replacing the single-speed compressor with a variable-speed compressor and adding a VFD to the supply fan. 3) Replacing the constant-speed induction motor of the supply fan with a high rotor pole SRM. DOE’s building simulation platform EnergyPlus and its graphical user interface OpenStudio were used to evaluate the energy-saving potential of upgrading RTUs, by leveraging experimental data from previous research.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Transmission-mounted combined energy recovery drive

An energy recovery drive system includes a motor-generator that is structured to selectively operate in a motor mode and a generator mode. A first shaft is operatively coupled to a transmission power take-off shaft. A second shaft is operatively coupled to the motor-generator and to an alternative power source. The energy recovery drive system is controllably operated in a plurality of operating modes. In a first operating mode, the motor-generator is in torque providing engagement with each of the first and second shafts. In a second operating mode, the motor-generator is in torque communicating engagement with each of the first and second shafts. In a third operating mode, which the motor-generator is in torque communicating engagement with the second shaft and is disengaged from transferring torque to the first shaft and from receiving torque from the first shaft.

Correa, Dixon Malcolm↗
DOE OSTI2020

Parallel Time Integration for Constrained Optimization

The number of transistors in an average processor continues to increase, but individual clock speeds have plateaued. Those transistors are instead going into additional cores, increasing the number of different things that a processor can do at once and placing an emphasis on parallel computation. Many problems in scientific computing follow a time-evolution model, and it can be difficult to solve such problems in parallel across the temporal domain. The Multi-Grid Reduction In Time (MGRIT) algorithm, developed at Lawrence Livermore National Laboratory (LLNL), solves differential equations with a method designed specifically to take advantage of extreme numbers of processors by parallelizing across time. The Tri-diagonal MGRIT (TriMGRIT) algorithm, also developed at LLNL, is a generalization of MGRIT which enables parallel-in-time solving of a greater number of problems. Constrained optimization problems, in particular, may be solved in parallel using TriMGRIT. These consist of choosing a control function such that an objective functional is minimized, constrained by a differential-equation. We consider two such problems: applying torque to a pendulum to bring it to a gentle stop and moving a crowd of people from one distribution into another. We also perform some miscellaneous theoretical and practical research, including investigating the use of a line-search subroutine to refine intermediate TriMGRIT results and preliminary work on strategies for choosing operators for TriMGRIT to use.

97 MATHEMATICS AND COMPUTING↗