Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tomographic reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The Anatomy of an Unusual Edge-on Protoplanetary Disk. II. Gas Temperature and a Warm Outer Region

We present high-resolution {sup 12}CO and {sup 13}CO 2–1 ALMA observations, as well as optical and near-infrared spectroscopy, of the highly inclined protoplanetary disk around SSTC2D J163131.2–242627. The spectral type we derive for the source is consistent with a 1.2 M {sub ⊙} star inferred from the ALMA observations. Despite its massive circumstellar disk, we find little to no evidence for ongoing accretion on the star. The CO maps reveal a disk that is unusually compact along the vertical direction, consistent with its appearance in scattered light images. The gas disk extends about twice as far away as both the submillimeter continuum and the optical scattered light. CO is detected from two surface layers separated by a midplane region in which CO emission is suppressed, as expected from freeze-out in the cold midplane. We apply a modified version of the tomographically reconstructed distribution method presented by Dutrey et al. to derive the temperature structure of the disk. We find a temperature in the CO-emitting layers and the midplane of ∼33 K and ∼20 K at R < 200 au, respectively. Outside of R > 200 au, the disk’s midplane temperature increases to ∼30 K, with a nearly vertically isothermal profile. The transition in CO temperature coincides with a dramatic reduction in the submicron and submillimeter emission from the disk. We interpret this as interstellar UV radiation providing an additional source of heating to the outer part of the disk.

47 OTHER INSTRUMENTATION↗

Model studies of laser absorption computed tomography for remote air pollution measurement

Model studies of the potential of laser absorption-computed tomography are presented which demonstrate the possibility of sensitive remote atmospheric pollutant measurements, over kilometer-sized areas, with two-dimensional resolution, at modest laser source powers. An analysis of this tomographic reconstruction process as a function of measurement SNR, laser power, range, and system geometry, shows that the system is able to yield two-dimensional maps of pollutant concentrations at ranges and resolutions superior to those attainable with existing, direct-detection laser radars.

Wolfe, D. C., Jr.↗

Holographic interferometry of transparent media using light scattered by embedded test objects

Fringe formation and localization in holographic interferometry of transparent media are discussed for configurations in which light enters the medium and is scattered back through it by an embedded diffuse object. Fringe order numbers are doubled, and the fringe localization region is translated and compressed by a factor of two. The results are applicable to tomographic reconstruction of aerodynamic density fields around opaque test objects.

Prikryl, I.↗

Ultrasonic time-of-flight monitoring of the position of the liquid/solid interface during the Bridgman growth of germanium

Ultrasound has been used to track the movement of the solid/liquid interface during the vertical Bridgman growth of germanium. Digitally processed data representing the received ultrasonic signal indicated a time lag prior to crystal growth, and showed a growth rate close to the pulling rate of the furnace. No effect of the ultrasonic energy on the growth of the crystal or on the formation of defects was observed. The interface was located to within 0.3 mm in the presence of substantial temperature gradients. An extension of the work presented could lead to a tomographic reconstruction of the interface shape.

Carter, John N.↗

Tomographic separation of composite spectra. 2: The components of 29 UW Canis Majoris

We have analyzed the UV photospheric lines of 29 CMa, a 4.39 day period, double-lined O-type spectroscopic binary. Archival data from International Ultraviolet Explorer (IUE)(28 spectra well distributed in oribital phase) were analyzed with several techniques. We find that the mass ratio is q = 1.20 +/- 0.16 (secondary more massive) based on three independent arguments. A tomography algorithm was used to produce the separate spectra of the two stars in six UV spectral regions. The MK spectral classifications of the primary and secondary, O7.5-8 Iab and O9.7 Ib, respectively, were estimated through a comparison of UV line ratios with those in spectral standard stars. The flux ratio of the stars in the UV is 0.36 +/- 0.07 (primary brighter). The primary has a strong P Cygni NIV wavelength 1718 feature, indicating a strong stellar wind. We also present tomographic reconstructions of visual spectral data in the range 4300-4950 A, based on seven observations of differing orbital phases, which confirm the UV classifications, and show that the primary is an Of star. From the spectral classifications, we estimate the temperatures of the stars to be 33,750 K and 29,000 K for primary and secondary, respectively. We then fit visual and UV light curves and show that reasonably good fits can be obtained with these temperatures, a semicontact configuration, an inclination of 74 deg. +/- 2 deg., and an intensity ratio r is less than 0.5.

Bagnuolo, William G., Jr.↗

HD 53975: An O-type spectroscopic binary with a large mass ratio

We present radial velocities and line profiles of the O-type star HD 53975, which we find to be a spectroscopic binary with a period of 6.0173 days. Although there are no obvious signatures of the secondary in the line profiles, we have used the merit function of Shafter et al. (1980) to show that a secondary component is present in lines found in B-type spectra. We have compared the observed merit functions with merit functions for model profiles constructed assuming a main-sequence secondary, and this comparison consistently indicates a companion with a mass ratio of q = M(sub 2)/M(sub 1) = 0.23 +/- 0.04 and a magnitude difference Delta m = 3.3 +/- 0.4. We present a tomographic reconstruction of the spectrum of the secondary for these parameters. We suggest that other large mass ratio binaries may be found among the O stars when observed with high-resolution and high signal-to-noise ratio spectroscopy.

Gies, D. R.↗

Lamb Wave Tomography for Corrosion Mapping

As the world-wide civil aviation fleet continues to age, methods for accurately predicting the presence of structural flaws-such as hidden corrosion-that compromise airworthiness become increasingly necessary. Ultrasonic guided waves, Lamb waves, allow large sections of aircraft structures to be rapidly inspected. However, extracting quantitative information from Lamb wave data has always involved highly trained personnel with a detailed knowledge of mechanical-waveguide physics. Our work focuses on using a variety of different tomographic reconstruction techniques to graphically represent the Lamb wave data in images that can be easily interpreted by technicians. Because the velocity of Lamb waves depends on thickness, we can convert the travel times of the fundamental Lamb modes into a thickness map of the inspection region. In this paper we show results for the identification of single or multiple back-surface corrosion areas in typical aluminum aircraft skin structures.

Hinders, Mark K.↗

Chloroplast Ultrastructure of the Alga Phaeocystis antarctica Karsten: A New Structural Model Using Electron Tomography

Understanding the light-harvesting properties of algae and higher plants are a fundamental topic in photosynthesis research. Using thick sections obtained from fixed and embedded cultures of colonial P antarctica, we calculate tomographic reconstructions of individual chloroplasts under light-limiting and saturating conditions for net photosynthesis. Our goal is to gain an understanding of the continuity of thylakoid membranes and understand the spatial relationship between the pyrenoid, the starch containing organelle, and thylakoid membranes. We found that Phaeocystis showed considerable morphological and physiological flexibility in response to environmental light levels. We found that the thylakoids generally run parallel to the chloroplast membrane with many junctures and bifurcations, many of which are in contact with the chloroplast membrane itself. The considerable flexibility in the. thylakoid membranes allows for the accommodation of the pyrenoid structure. The arrangement of the thylakoids within these structures resemble those found in new structures of mitochondria cristae. We present a new structural model for algal chloroplasts which greatly revises current concepts of thylakoid membrane structure in relation to photoacclimation.

Moisan, Tiffany A.↗

Parallel Computing for the Computed-Tomography Imaging Spectrometer

This software computes the tomographic reconstruction of spatial-spectral data from raw detector images of the Computed-Tomography Imaging Spectrometer (CTIS), which enables transient-level, multi-spectral imaging by capturing spatial and spectral information in a single snapshot.

Lee, Seungwon↗

Heliophysics from and of the Moon - the Solar Occultation Explorer (SOX)

The fundamental processes of the inner corona of the Sun at 1.1 to 3 solar radii can occasionally be investigated in detail by ground-based solar eclipse observations at quasi-yearly intervals. The combination of portable ground-based telescopes and the distant occulting edge provided by the lunar limb allows imaging of coronal structure and ion excitation emission lines at the highest available spatial and spectral resolution. These observations are limited to the visible eastern and western coronal regions and cannot view the intervening region over the central disk in the hemisphere towards Earth. A comparable configuration for continuous coronal observations from a spacecraft, e.g. with an external occulter disk on a 100-meter boom, is conceivable and could generate 3-D data models of the corona via tomographic reconstruction from time series measurements but may not now be technically or economically feasible. The faster and cheaper approach would be to make high cadence eclipse observations from one or more small satellites in lunar orbit. The Solar Occultation Explorer (SOX) is suggested as an explorer-class NASA mission that would conduct eclipse observations at daily to hourly cadence depending on the orbit. This smallsat would carry two principal instrument suites: (1 ) spectroscopic imaging telescope with sub-nm resolution for selected coronal emission lines diagnostic of coronal plasma charge state, denSity, and temperature, and (2) in-situ field & particle instrument suite for measurements of the solar wind and local lunar environments. The most comparable flight heritage instrument, the LASCO C1 spectrometer on the Solar and Heliospheric Observatory (SOHO) mission, did achieve high visible-band spectral resolution with a Fabry-Perot interferometer but was limited in brightness sensitivity by usage of an internal occulter system and has not been operational since June 1998 The SOX mission concept is undergoing initial study by the Lunar Solar Origins Exploration (LunaSOX) project of the NASA Lunar Advanced Science and Exploration Research (LASER) program. This mission would offer high complementarity with the planned Solar Probe Plus spacecraft, designed to investigate.

Cooper, John F.↗

Coronal Polarization of Pseudostreamers and the Solar Polar Field Reversal

The reversal of the solar polar magnetic field is notoriously hard to pin down due to the extreme viewing angle of the pole. In Cycle 24, the southern polar field reversal can be pinpointed with high accuracy due to a large-scale pseudostreamer that formed over the pole and persisted for approximately a year. We tracked the size and shape of this structure with multiple observations and analysis techniques including PROBA2/SWAP EUV images, AIA EUV images, CoMP polarization data, and 3D tomographic reconstructions. We find that the heliospheric field reversed polarity in February 2014, whereas in the photosphere, the last vestiges of the previous polar field polarity remained until March 2015. We present here the evolution of the structure and describe its identification in the Fe XII 1074nm coronal emission line, sensitive to the Hanle effect in the corona.

magnetic field↗

A Fast Hybrid (3-D/1-D) Model for Thermal Radiative Transfer in Cirrus via Successive Orders of Scattering

We investigate the impact of cirrus cloud heterogeneity on the direct emission by cloud or surface and on the scattering by ice particles in the thermal infrared (TIR). Realistic 3-D cirri are modeled with the 3DCLOUD code, and top-of-atmosphere radiances are simulated by the 3-D Monte Carlo radiative transfer (RT) algorithm 3DMCPOL for two (8.65 micrometers and 12.05 micrometers) channels of the Imaging Infrared Radiometer on CALIPSO. At nadir, comparisons of 1-D and 3-D RT show that 3-D radiances are larger than their 1-D counterparts for direct emission but smaller for scattered radiation. For our cirrus cases, 99% of the 3-D total radiance is computed by the third scattering order, which corresponds to 90% of the total computational effort, but larger optical thicknesses need more scattering orders. To radically accelerate the 3-D RT computations (using only few percent of 3-D RT time with a Monte Carlo code), even in the presence of large optical depths, we develop a hybrid model based on exact 3-D direct emission, the first scattering order from 1-D in each homogenized column, and an empirical adjustment linearly dependent on the optical thickness to account for higher scattering orders. Good agreement is found between the hybrid model and the exact 3-D radiances for two very different cirrus models without changing the empirical parameters. We anticipate that a future deterministic implementation of the hybrid model will be fast enough to process multiangle thermal imagery in a practical tomographic reconstruction of 3-D cirrus fields.

radiative transfer↗

PuMA and Multiscale Modeling

The Porous Microstructure Analysis (PuMA) software was initially developed to analyze tomographic reconstructions of fibrous materials, commonly used as insulators in NASA spacecrafts. Since then, the software grew in capabilities and it is now able to compute many different geometric and physical properties, which are often anisotropic at multiple scales. In addition, PuMA can generate its own artificial microstructures in order to study their performance. This talk will give an overview of the main functions and display its application to some of the widely used carbon ablators for heatshields, including the more challenging woven architectures.

Federico Semeraro↗

Tracking Nonradial Outflows in Extreme Ultraviolet and White Light Solar Images

Understanding the solar corona requires knowledge of its dynamics through its various layers and subsequent connectivity to the heliosphere. This requires understanding the nature of the outflows and the physical transitions through the middle corona (∼1.5–6.0 Rs). While this region is still inaccessible to in situ measurements, remote sensing observations are available, but their interpretation can be controversial due to line-of-sight effects and the nonradial motion of outflowing structures close to the Sun (≤3.0 Rs). In this work, we describe a method to mitigate these challenges by generating nonradial height–time profiles of outflows by using advanced image processing techniques. The northern and southern boundaries of a large equatorial streamer during the 2008 solar minimum were identified in STEREO/SECCHI solar images, using two different methodologies based on thresholds of brightness and piecewise polynomial function fitting. To address line-of-sight issues, we used tomographic reconstruction of the 3D distribution of the coronal electron density based on SECCHI/COR2 images. Spectral analysis of the time series of the position angle of the streamer boundary revealed its oscillatory nature at some heights at 36–48 and 10.5–14.6 hr. Dividing the distance between the northern and southern streamer boundaries in equal parts at each height, we obtained nonradial height–time paths from which we generated nonradial profiles of corona/solar wind plasma outflow. We tracked outflows as they moved uninterruptedly from the Sun in EUVI, through COR1 and into COR2. Finally, we discuss the preliminary results of nonradial plane-of-sky velocities for a coronal mass ejection and two small-scale features.

Nathalia Alzate↗

Comparison of AGR-3/4 Fission Product Transport Model to Measurements and Extraction of Diffusivities via Analytical Fits

A one-dimensional finite-element model based on the MOOSE framework has been constructed, and overall transport estimates are predicted based on available diffusivities and sorption isotherms in the extant literature. The predicted transport profiles are compared to experimental results, where such results are available, including total inventory analysis of gamma emitters, liquid scintillation results for Sr-90 concentrations, radial deconsolidation leach-burn-leach within compacts, tomographic reconstructions based on detailed gamma scanning and destructive physical sampling of several rings. The magnitude of expected transport to the sink ring is generally predicted by the model for silver and cesium, however, modeled detailed concentration profiles are not consistent with experimental results. Strontium and europium transport is not well characterized by model results.

07 ISOTOPE AND RADIATION SOURCES↗

Characterization of Pinhole Collimators for High-Resolution Gamma Imaging of Irradiated Fuel

Post-irradiation examination (PIE) of nuclear fuels requires imaging tools capable of resolving isotopic and spatial features with high throughput. This project contributes to a proof-of-concept effort aimed at advancing gamma emission tomography (GET) by evaluating novel fine-aperture pinhole collimators. Two Rose’s metal collimators, 100 µm (20° acceptance angle) and 350 µm (30° acceptance angle), were prototyped and characterized for their effectiveness in transporting gamma rays through the pinhole aperture. To support data collection, a Python-based data acquisition system was developed to coordinate a rotation stage, linear stage, and CZT detector, reducing latency in high-rate gamma event logging to one second per acquisition. Queue-based file writing enabled seamless real-time data capture for count rates up to 35,000 counts per second (cps). List-mode parsing algorithms were implemented to differentiate single and simultaneous gamma interactions for future tomographic reconstruction. Detector response was evaluated in both spectroscopy and list mode acquisition methods across varying source distances to confirm absolute and collimator efficiencies. Preliminary efficiency figures suggest effective collimation of gamma-rays with energies below 700 keV, with ~4% residual intensity through the aperture for Cs-137. The impact of collimator geometry on image quality is currently being evaluated. This groundwork supports the ongoing development of a sub mm resolution cone-beam CT system for imaging fuel phantoms, an essential step toward improving GET efficiency and accelerating nuclear fuel qualification efforts.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

A generative modeling approach to reconstructing 21 cm tomographic data

Abstract Analyses of the cosmic 21 cm signal are hampered by astrophysical foregrounds that are far stronger than the signal itself. These foregrounds, typically confined to a wedge-shaped region in Fourier space, often necessitate the removal of a vast majority of modes, thereby degrading the quality of the data anisotropically. To address this challenge, we introduce a novel deep generative model based on stochastic interpolants to reconstruct the 21 cm data lost to wedge filtering. Our method leverages the non-Gaussian nature of the 21 cm signal to effectively map wedge-filtered 3D lightcones to samples from the conditional distribution of wedge-recovered lightcones. We demonstrate how our method is able to restore spatial information effectively, considering both varying cosmological initial conditions and astrophysics. Furthermore, we discuss a number of future avenues where this approach could be applied in analyses of the 21 cm signal, potentially offering new opportunities to improve our understanding of the Universe during the epochs of cosmic dawn and reionization. Code, pre-trained models, and scripts for making plots in this paper can be found here .

Sabti, Nashwan (ORCID:000000027924546X)↗

Reconstruction of Fission Product Distribution from Tomographic Scans in TRISO Fuel Graphitic Matrix and Nuclear Grade Graphites

An image reconstruction method was developed to rectify shortcomings of earlier methods that became apparent as destructively sampled data became available. This reconstruction method was applied to the tomographic gamma scans of nuclear graphite and graphitic matrix samples from AGR-3/4. There is generally agreement between profiles measured via destructive sampling of these rings and profiles from tomographic reconstruction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗