Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “titanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sinter formation during directed energy deposition of titanium alloy powders

During directed energy deposition (DED) additive manufacturing, powder agglomeration and sintering can occur outside of the melt pool when using titanium alloy powders. Using in situ synchrotron radiography we investigate the mechanisms by which sintering of Ti6242 powder occurs around the pool, performing a parametric study to determine the influence of laser power and stage traverse speed on sinter build-up. The results reveal that detrimental sinter can be reduced using a high laser power or increased stage traverse speed, although the latter also reduces deposition layer thickness. The mechanism of sinter formation during DED was determined to be in-flight heating of the powder particles in the laser beam. Calculations of particle heating under the processing conditions explored in this study confirm that powder particles can reasonably exceed 700 °C, the threshold for Ti surface oxide dissolution, and thus the powder is prone to sintering if not incorporated into the melt pool. The build-up of sinter powder layer on deposit surfaces led to lack of fusion pores. To mitigate sinter formation and its detrimental effects on DED component quality, it is essential that the powder delivery spot area is smaller than the melt pool, ensuring most powder lands in the melt pool.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Correlation of optical properties with particle size, morphology, and polymorph of fine- and nano-particle formulations of titanium dioxide powders

Titanium dioxide (TiO 2 ) particulates are known to exhibit different visible and infrared optical properties compared to the bulk material, showing strong dependence on particle size, crystal structure, and morphology. In this study, the optical properties, sizes, and morphologies of TiO 2 particles from two different sources (nano and fine powders) having a) nominally different particle sizes and b) various crystal polymorph mixture fractions are compared using a combination of single particle mass spectrometry, optical spectroscopies, and aerosol characterization methods. The nano sample was found to be largely particles of the anatase polymorph (88% by mass), while the fine sample was found to consist largely of rutile particles (95% by mass). Two distinct particle morphologies (fractal and compact) were found in each powder sample and could be identified and separated in-situ based on particle aerodynamic properties. The attenuation of near-infrared, visible and ultraviolet light by TiO 2 particles shows strong dependence on particle morphology. Furthermore, while the fine particles were found to have larger near-infrared (675–800 nm) extinction coefficients by mass than the nanoparticles, the reverse was true in the ultraviolet and visible regions (370–675 nm). However, for polydisperse particles with different sizes and shapes, the optical behaviors are not straightforward to directly correlate to a combination of physical parameters.

Lockwood, Schuyler P. [Pacific Northwest National ↗
DOE OSTI2023

Impact of titanium content on the thermo-mechanical and oxidation response of TiAlTa

This study aimed to analyze how the addition of titanium (Ti) to TiAlTa alloys affects their mechanical properties (Young’s modulus and hardness) and oxidation behavior. Alloys with three different Ti additions and equi-atomic Al and Ta were fabricated with nominal compositions of 33Ti-33Al-33Ta at%, 50Ti-25Al-25Ta at%, and 70Ti-15Al-15Ta at%. Phase identification of as-processed and compositionally homogenized alloys was conducted by coupling various electron microscopy, diffraction, and chemical analysis techniques. Composition and structures were modeled using CALPHAD-based phase predictions and compared with experimental results. Each of the alloys exhibited a unique set of microstructures with distinctly different ordered precipitates, dependent on cooling rate and chemical composition. Subsequently, nanoindentation tests were performed at temperatures of 25°C, 250°C, 500°C, and 750°C. Oxidation studies were conducted under static air at 750°C for up to 200 h. 33Ti-33Al-33Ta at% and 70Ti-15Al-15Ta at% alloys showed higher hardness and modulus than 50Ti-25Al-25Ta at% at room temperature. The 50Ti-25Al-25Ta at% alloy exhibited higher hardness and modulus values but lower oxidation resistance at 750°C when compared with the other specimens. The X-ray photoelectron spectroscopy experiments were conducted to further analyze the oxides present in the samples. Despite each sample displaying combinations of mixed oxide layers, TiO 2 was the preferred oxide forming in the 50Ti-25Al-25Ta composition, while the other samples preferred to form Al 2 O 3 . In conclusion, the findings from this systematic exploration of phase evolution in the TiAlTa alloy space provide insights for optimized material chemistries, processing, and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct measurement of the effective properties of an additively manufactured titanium octet truss unit cell using high energy X-ray diffraction

Additively manufactured lattice structures offer a high specific strength-to-density ratio in comparison to conventional, fully dense parts. The small feature size and intricate geometry of lattice structures make it challenging to directly characterize their mechanical properties. This study presents direct measurement of the elastic mechanical properties of an additively manufactured titanium alloy octet truss unit cell. Strut stress and strain were measured using high-energy X-ray diffraction during quasi-static compressive loading. The crystallographic stress-strain relationship was converted into the stress-strain relationship of the octet truss lattice unit cell using the known symmetry of the struts. The sample studied herein was best fit by an orthorhombic linear elastic stress-strain relationship. In conclusion, this technique shows promise for studying additively manufactured lattice structures at length scales not previously reported.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plasmon mediated deposition of Ni on titanium nitride nanoparticles: Applications in enhanced photoreduction of bicarbonate

A suitably designed plasmonic catalyst can provide versatile and energy-efficient strategies to utilize visible light to drive different catalytic reactions. Here we have successfully developed composite plasmonic catalysts by visible-light-induced deposition of popular transition metal nanocatalysts such as Ni and Pt on refractory plasmonic titanium nitride (TiN) nanoparticles. Here, the catalytic properties of the TiN composite nanoparticles were evaluated using the visible light-mediated bicarbonate to formate reduction reaction in the presence of glycerol as the hole-scavenger. Deposition of Ni and Pt nanocatalysts on TiN significantly improves its catalytic efficiency towards the reaction. However, Ni deposited on TiN nanoparticles exhibited better catalytic properties in comparison to that of TiN_Pt composites. The findings of this study can be used to develop stable and efficient visible light-responsive plasmonic composite catalysts which can accelerate different energy extensive reactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Multifunctional transition metal doped titanium dioxide reduced graphene oxide composites as highly efficient adsorbents and photocatalysts

A series of novel, mesoporous transition metal doped titanium dioxide-reduced graphene oxide composites are synthesized where the dopants were Mn, Co, Ni, Mo, and W. An in-situ synthesis method was used which involves a green, economic, hydrothermal process which can be scaled up easily. The composites show high surface areas (165–245 m 2 /g) and monomodal pore size distributions with average pore diameters in the range of 3–5 nm. The homogeneous distributions of the dopants are seen in SEM-EDX mapping data. The indirect band gaps of the composite materials are in the range of 2.20–2.48 eV. The composites show excellent dye adsorption activities where 100% adsorption of Rhodamine B occurs within 5 min when Mo–TiO 2 /rGO composite is used. Furthermore, the adsorbed dye can either be desorbed or photocatalytically degraded and the composite is reusable up to 10 cycles without losing significant activity. Mo–TiO 2 /rGO composite showed excellent adsorption of both cationic and anionic dyes at neutral pH.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Minor titanium addition markedly improves the co-deformability of copper-tantalum composites

We investigated the microstructures of equal channel angular extrusion (ECAE) processed sintered composites of copper (Cu) and tantalum (Ta). These composites were produced with nominal Ta volume percentages ranging from 25% to 75%. Additional composites of the same nominal Ta content were prepared with a minor amount of titanium (Ti) added to facilitate interphase bonding. Ti addition was found to markedly improve the strength and co-deformability of the composites, allowing reliable extrusion of Cu-Ta composites with novel microstructures. A major influence of the Ti appears to be to soften the Ta, which contributes to improved co-deformability by reducing the flow stress mismatch between the composite constituents. Here, a change in the fracture surface morphology in the Ti-modified composite compared to the unmodified composite suggests that the Ti may also improve cohesion between Cu and Ta by reducing Ta surface oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study

Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparison of three measurement modalities for 3D characterization of manufactured features and process-induced porosity in titanium alloy additively manufactured parts

Nondestructive characterization of internal features and defects within complex components is vital for many industrial applications, particularly with the advent of additive manufacturing (AM) technologies. However, community understanding of the limitations of nondestructive methods such as X-ray Computed Tomography (CT) can be limited in certain industrial sectors as these may be emergent applications. In this paper, we investigate the limits of X-ray CT measurements and compare extracted data with mechanical polishing serial sectioning (MPSS) and confocal laser scanning microscopy (CLSM). The test object is an additively manufactured titanium alloy disk that contains both process-induced porosity and machined features, including focused ion beam milled features designed to probe the resolution limits of X-ray CT. Results show that each of these characterization techniques has advantages and disadvantages. We compare data acquisition times, spatial resolution, geometric measurement accuracy and defect visualization fidelity across these modalities to establish a practical framework.

Additive manufacturing↗
DOE OSTI2020

First-Principles Modeling of Sodium Ion and Water Intercalation into Titanium Disulfide Interlayers for Water Desalination

Recent experiments revealed the possibility of using titanium disulfide (TiS 2 ) as the cathode material in capacitive deionization (CDI) devices for water desalination. Although it performed stably up to 70 cycles with a salt removal capacity of 14 mg/g (corresponding to a sodium ion removal capacity of 35.8 mg/g) at high molar concentration (600 mM NaCl), the maximum capacity of TiS 2 as a CDI electrode was much lower (~70 mAh/g) than as a supercapacitor (239 mAh/g). Understanding why the ion capacities of these two configurations of the same material differ will entail elucidating detailed charge/discharge mechanisms at the atomic scale. Here, we present density functional theory simulations of sodium intercalation into TiS 2 interlayers in order to gain such understanding. We systematically investigated TiS 2 stacking patterns and ion intercalation sites, energetics of the intercalated compounds, and phase transformation during sodium intercalation. The calculated structural evolution and capacitance–voltage curve agree quite well with previous measurements. We conclude that the different maximum capacities of TiS 2 measured in aqueous and dry environments originate from weaker interlayer interactions with respect to shear strain after ~33% intercalation of Na + –H 2 O pairs, which is detrimental to the mechanical stability of TiS 2 . In conclusion, this study sheds light on the underlying mechanisms of ion intercalation into layered materials and contributes to understanding requirements for future design and optimization of CDI electrode materials for water desalination.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Structure-Dependent Lithium Metal Reactivity of Lithium Lanthanum Titanium Oxide Solid Electrolytes

Ongoing efforts to design stable, ionically conductive solid-state electrolytes (SSEs) for next-generation solid-state batteries make it clear that both long and short-range structural order strongly influence materials performance. However, clear structure-property relationships are generally lacking, making it difficult to develop design rules for improving the (electro) chemical stability of SSEs. Here, in this work, we synthesize epitaxial, single-crystal lithium lanthanum titanium oxide (LLTO) films and demonstrate that the kinetics of Ti 4+ reduction and lithium intercalation depend sensitively on the crystal orientation, with electrochemical stability increasing as LLTO (001) < (110) similar to (112) < (100). However, thermodynamic stability is ultimately unaffected-all orientations fully reduce after extended contact with Li metal. In contrast, amorphous LLTO films exhibit minimal, self-limiting reactivity that results in an interface that is stable to extended contact with Li metal. The results demonstrate the potential to engineer crystal lattice strain and long-range order to differentially tune the stability of the solid electrolyte toward reactive lithium metal and cathode materials, suggesting strategies for enabling the wider deployment of LLTO and other ionically conductive ceramic films in advanced energy storage technologies

Ketter, Benjamin [Argonne National Laboratory (ANL↗
DOE OSTI2023

Mechanism of Stoichiometrically Governed Titanium Oxide Brownian Tree Formation on Stepped Au(111)

Previously observed formation of substoichiometric titanium oxide dendritic structures across terraces of Au(111) is computationally studied and shown to follow the classical fractal formation mechanism of diffusion-limited aggregation (DLA). Globally optimized gas-phase oxide cluster structures are sampled in a variety of landing formations on gold surfaces and shown to favor isomers driving polymerization to Brownian tree fractal structures. Mobility of Ti 3 O 5 monomers is shown to be extremely high, with diffusion barriers of 0.21 eV or less. Through bonding stabilization, polymerization of these monomers is energetically favorable and irreversible on the 111 terrace but geometrically impossible to propagate along the step edge. Simulated scanning tunneling microscopy (STM) images show strong similarity to experiment. By contrast, observation of Ti 3 O 6 aggregating as wires along step edges is explained by the affinity of oxygen to step edges and statistical arguments for aggregation entropy at the step, in addition to low barriers for monomer diffusion and polymerization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nucleation and Initial Stages of Growth during the Atomic Layer Deposition of Titanium Oxide on Mesoporous Silica

A chemical approach to the deposition of thin films on solid surfaces is highly desirable but prone to affect the final properties of the film. To better understand the origin of these complications, the initial stages of the atomic layer deposition of titania films on silica mesoporous materials were characterized. Adsorption-desorption measurements indicated that the films grow in a layer-by-layer fashion, as desired, but initially exhibit surprisingly low densities, about one-quarter of that of bulk titanium oxide. Electron microscopy, X-ray diffraction, UV/visible, and X-ray absorption spectroscopy data pointed to the amorphous nature of the first monolayers, and EXAFS and 29 Si CP/MAS NMR results to an initial growth via the formation of individual tetrahedral Ti-oxide units on isolated Si-OH surface groups with unusually long Ti-O bonds. Here, density functional theory calculations were used to propose a mechanism where the film growth starts at the nucleation centers to form an open 2D structure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrochemical and Chemical Reactivities of Titanium Oxide-Based Materials with a Chloroaluminate Ionic Liquid Electrolyte for Aluminum Batteries

Here, by selecting three different types of electrode materials, we intended to better understand the Al 3+ intercalation chemistry of titanium oxide-based frameworks with an acidic chloroaluminate electrolyte. In agreement with previous reports, we confirmed that the native interstitial sites of anatase TiO 2 are less prone to accommodate Al 3 + than Li + or Na + ions, while introducing cationic vacancies largely increases the electrochemical storage capacity. Upon the first cycle, the highest reversible capacity, up to 277 mAh/g, was obtained for a hydrated layered structure featuring cationic vacancies. Total scattering data showed that the insertion of Al 3+ ions induced a strong distortion of the framework. In addition, combined 27 Al MAS NMR and DFT calculations revealed that in oxy-hydroxylated vacant sites, the coordination mode of Al 3+ ions depends on the arrangement of anions around vacancies inducing the occurrence of 4-, 5-, and 6-fold coordination modes. Further cycling experiments revealed a progressive capacity fading for all electrode materials. Using cyclic voltammetry on the used electrolyte, we evidenced that a partial dissolution has occurred, which is more pronounced for the layered hydrate compound, and that solubilized species are electrochemically active, giving rise to specific signatures in both CVs and galvanostatic experiments. Raman spectroscopy enabled us to characterize these species, which are derived from the Ti-Cl system. The solubilized species, however, eventually precipitated, as shown by a purple deposit observed on the separator and tentatively assigned to TiCl 3 , known to be insoluble in this medium. By providing further information on the Al 3+ intercalation chemistry and a better understanding of the electrochemical and chemical reactivities of electrode materials, this work will enable progress to be made in the development of aluminum-ion batteries.

Al3+-ion insertion chemistry↗
DOE OSTI2024

Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic–Inorganic Hybrid Photocatalysts

Herein, we report for the first time the use of vapor phase infiltration (VPI) to infuse conducting polymers with inorganic metal oxide clusters that together form a photocatalytic material. While vapor infiltration has previously been used to electrically dope conjugated polymers, this is the first time, to our knowledge, that the resultant hybrid material has been demonstrated to have photocatalytic properties. The system studied is poly(3-hexylthiophene-2,5-diyl) (P3HT) vapor infiltrated with TiCl 4 and H 2 O to create P3HT-TiO x organic–inorganic hybrid photocatalytic materials. X-ray photoelectron spectroscopy analysis shows that P3HT-TiO x VPI films consist of a partially oxidized P3HT matrix, and the infiltrated titanium inorganic is in a 4+ oxidation state with mostly oxide coordination. Upon visible light illumination, these P3HT-TiO x hybrids degrade methylene blue dye molecules. The P3HT-TiO x hybrids are 4.6× more photocatalytically active than either the P3HT or TiO 2 individually or when sequentially deposited (e.g., P3HT on TiO 2 ). On a per surface area basis, these hybrid photocatalysts are comparable or better than other best in class polymer semiconductor photocatalysts. VPI of TiCl 4 + H 2 O into P3HT makes a unique hybrid structure and idealized photocatalyst architecture by creating nanoscale TiO x clusters concentrated toward the surface achieving extremely high catalytic rates. The mechanism for this enhanced photocatalytic rate is understood using photoluminescence spectroscopy, which shows significant quenching of excitons in P3HT-TiO x as compared to neat P3HT, indicating that P3HT acts as a photosensitizer for the TiO x catalyst sites in the hybrid material. This work introduces a new approach to designing and synthesizing organic–inorganic hybrid photocatalytic materials, with expansive opportunities for further exploration and optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoscopic Titanium Dioxide Overlayers Improve the Durability of Porphyrin Molecular Electrocatalysts while Maintaining Molecular Structure and Redox Activity

Molecular catalysts, such as metalated porphyrins, are attractive cocatalysts for photocatalytic water splitting owing to their potential to simultaneously catalyze target reactions at their metal center, extend charge-separated-state lifetimes, and accumulate the requisite charge for product formation. However, porphyrin catalysts, like most molecular catalysts, are often limited by poor stability associated with demetalation, inactivation by undesired bonding (e.g., O2 coordination/redox/dimerization), and detachment from electrode supports or semiconducting photoabsorbers. In this study, nanoscopic titanium dioxide (TiO2) overlayers, deposited by atomic layer deposition (ALD), are demonstrated to encapsulate cobalt(III) meso-tetra(4-carboxyphenyl) porphyrin chloride (CoTCPP) molecular catalysts and thereby improve their adhesion to electrode surfaces over a wide range of electrode potentials spanning from -1.0 V vs RHE to +1.8 V vs RHE. Through analysis of Raman and ultraviolet-visible spectroscopy, it was confirmed that the metalloporphyrin structure was maintained when the surface-bound CoTCPP was encapsulated by 10 - 250 ALD cycles (~2 - 18 nm thick) of TiO2. Additional characterization of CoTCPP catalysts before and after electrochemical measurements reveals that up to 97% of the encapsulated CoTCPP remains tethered to the electrode surface after chronoamperometry tests under hydrogen evolution reaction (HER) conditions, compared to <36% for unencapsulated CoTCPP. This study also shows that encapsulated CoTCPP molecules remain partially redox active for overlayers up to 8 nm, which can also attenuate undesired redox mediator back reactions like ferricyanide reduction.

08 HYDROGEN↗
DOE OSTI2025

Photothermal Properties of Nanostructured Black Titanium Dioxide for Targeted Cellular and Microbial Elimination

Heterophase black titanium dioxide (hB-TiO 2 ), characterized by broadened near-infrared (NIR) absorption, has emerged as a promising photothermally active nanomaterial. This study focused on the synthesis of nanoscale hB-TiO 2 and its evaluation as a multifunctional agent for photothermal therapy (PTT). The purity and composition of the mixed-phase nanoscale hB-TiO 2 were demonstrated by X-ray diffraction, and the morphology of nanoparticles was imaged by transmission electron microscopy. Extensive additional characterization was conducted to validate the optoelectronic properties. The material was further evaluated in biological systems using NIH 3T3-GFP fibroblasts and the fungus Candida albicans. Nanoscale hB-TiO 2 exhibited good biocompatibility in the absence of laser irradiation and effectively ablated both NIH 3T3-GFP cells and C. albicans following 20 min of laser exposure. This noninvasive treatment strategy leverages NIR-responsive materials to induce localized hyperthermia. The findings provide grounds for the use of selectively induced hyperthermia, which could be employed for the targeted destruction of cells or fungi with minimal impact on surrounding tissue if the material is functionalized with specific targeting groups and delivered to cells or fungal infections.

Irradiation↗
DOE OSTI2024

Theoretical Prediction and Experimental Verification of IrO x Supported on Titanium Nitride for Acidic Oxygen Evolution Reaction

Reducing iridium (Ir) catalyst loading for acidic oxygen evolution reaction (OER) is a critical strategy for large-scale hydrogen production via proton exchange membrane (PEM) water electrolysis. However, simultaneously achieving high activity, long-term stability, and reduced material cost remains challenging. To address this challenge, we develop a frame-work by combining density functional theory (DFT) prediction using model surfaces and proof-of-concept experimental ver-ification using thin films and nanoparticles. DFT results predict that oxidized Ir monolayers over titanium nitride (IrO x /TiN) should display higher OER activity than IrO x while reducing Ir loading. Further, this prediction is verified by depositing Ir monolayers over TiN thin films via physical vapor deposition. The promising thin film results are then extended to commercially viable powder IrO x /TiN catalysts, which demonstrate a lower overpotential and higher mass activity than commercial IrO 2 , and a long-term stability of 250 hours to maintain a current density of 10 mA cm -2 . The superior OER performance of IrO x /TiN is further confirmed using proton exchange membrane water electrolyzer (PEMWE), which shows a lower cell voltage than commercial IrO 2 to achieve a current density of 1 A cm -2 . Both DFT and in situ X-ray absorption spectroscopy reveal that the high OER performance of IrO x /TiN strongly depends on the IrO x - TiN interaction via direct Ir-Ti bonding. This study highlights the importance of close interaction between theoretical prediction based on mechanistic understanding and experimental verification based on thin film model catalysts to facilitate the development of more practical powder IrO x /TiN catalysts with high activity and stability for acidic OER.

08 HYDROGEN↗