Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Temperature dependence of the electron density of states and dc electrical resistivity of disordered binary alloys.

A model calculation of the temperature dependence of the electronic density of states and the electrical conductivity of disordered binary alloys, based on the coherent-potential approximation is made by introducing thermal disorder in the single-band model (Velicky and others). Thermal disorder is found to broaden and smear the static-alloy density of states. The electrical resistivity in weak-scattering alloys always increases with temperature. However, in the strong-scattering case, the temperature coefficient of resistivity can be positive, zero, or negative, depending on the location of the Fermi energy.-

Chen, A.-B.↗
NASA NTRS1982

Temperature dependence of the formation of sulfate aerosols in the stratosphere

Classical nucleation theory is used in calculations of the temperature dependence of the characteristics and nucleation rates of sulfate aerosols in the binary H2SO4-H2O vapor mixture, in order to assess the influence of temperature on the formation of sulfate aerosols in the stratosphere, and to explore the possibility of new particle formation through homogeneous nucleation processes at regions where temperature is as low as -75 C, rather than the often-assumed -50 or -55 C. Calculation results indicate that the number of particles formed at a lower temperature is larger by several orders of magnitude than at higher temperatures, when water and sulfuric acid vapor concentrations are kept constant, and that large quantities of ultrafine particles which cannot be detected by conventional methods may exist at low-temperature stratospheric regions.

Yue, G. K.↗
NASA NTRS1996

Laboratory Measurement of the Temperature Dependence of Gaseous Sulfur Dioxide (SO2) Microwave Absorption with Application to the Venus Atmosphere

High-accuracy laboratory measurements of the temperature dependence of the opacity from gaseous sulfur dioxide (SO2) in a carbon dioxide (CO2) atmosphere at temperatures from 290 to 505 K and at pressures from 1 to 4 atm have been conducted at frequencies of 2.25 GHz (13.3 cm), 8.5 GHz (3.5 cm), and 21.7 GHz (1.4 cm). Based on these absorptivity measurements, a Ben-Reuven (BR) line shape model has been developed that provides a more accurate characterization of the microwave absorption of gaseous S02 in the Venus atmosphere as compared with other formalisms. The developed BR formalism is incorporated into a radiative transfer model. The resulting microwave emission spectrum of Venus is then used to set an upper limit on the disk-averaged abundance of gaseous S02 below the main cloud layer. It is found that gaseous S02 has an upper limit of 150 ppm, which compares well with previous spacecraft in situ measurements and Earth-based radio astronomical observations.

Suleiman, Shady H.↗
NASA NTRS1992

Deposition temperature dependence of the deep defect density for a-Si:H films grown by electron cyclotron resonance microwave plasma

The dependence on deposition temperature of the mobility gap density of states has been determined for hydrogenated amorphous silicon (a-Si:H) films grown by electron cyclotron resonance (ECR) microwave plasma CVD. A minimum in the integrated deep defect density of 1 x 10 exp 16/cu cm was found to occur at a temperature of approximately 250 C, while an Urbach slope minimum of 52 meV was observed at 175 C under our deposition conditions. Based on these measurements the ECR-grown films were found to be of excellent device quality and comparable to a-Si:H films grown by RF plasma-enhanced CVD.

Essick, J. M.↗
NASA NTRS2014

Challenges in Modelling of Lightning-Induced Delamination; Effect of Temperature-Dependent Interfacial Properties

Lightning is a major cause of damage in laminated composite aerospace structures during flight. Due to the dielectric nature of Carbon fiber reinforced polymers (CFRPs), the high energy induced by lightning strike transforms into extreme, localized surface temperature accompanied with a high-pressure shockwave resulting in extensive damage. It is crucial to develop a numerical tool capable of predicting the damage induced from a lightning strike to supplement extremely expensive lightning experiments. Delamination is one of the most significant failure modes resulting from a lightning strike. It can be extended well beyond the visible damage zone, and requires sophisticated techniques and equipment to detect. A popular technique used to model delamination is the cohesive zone approach. Since the loading induced from a lightning strike event is assumed to consist of extreme localized heating, the cohesive zone formulation should additionally account for temperature effects. However, the sensitivity to this dependency remains unknown. Therefore, the major focus point of this work is to investigate the importance of this dependency via defining various temperature dependency profiles for the cohesive zone properties, and analyzing the corresponding delamination area. Thus, a detailed numerical model consisting of multidirectional composite plies with temperature-dependent cohesive elements in between is subjected to lightning (excessive amount of heat and pressure) and delamination/damage expansion is studied under specified conditions.

interlaminar damage↗
NASA NTRS1989

Pressure and temperature dependence of reactions proceeding via a bound complex. II - Application to 2CH3 yielding C2H5 + H

The pressure and temperature dependence of a reaction between two methyl radicals proceeding via ethane intermediate was modeled. Single-channel RRKM calculations were performed, based upon a hindered Gorin model for the transition state; the hindrance parameters were chosen to reproduce the high-pressure limiting rate constant from 300-1400 K. It is shown that the reaction between two methyl radicals may be characterized over wide ranges of temperature and pressure, using three analytical expressions of the type introduced by Troe (1979) for single-channel unimolecular processes.

Stewart, P. H.↗
NASA NTRS1995

Temperature-Dependent Rate Constants and Substituent Effects for the Reactions of Hydroxyl Radicals With Three Partially Fluorinated Ethers

Rate constants and temperature dependencies for the reactions of OH with CF3OCH3 (HFOC-143a), CF2HOCF2H (HFOC-134), and CF3OCF2H (HFOC-125) were studied using a relative rate technique in the temperature range 298-393 K. The following absolute rate constants were derived: HFOC-143a, 1.9E-12 exp(-1555/T); HFOC-134, 1.9E-12 exp(-2006/T); HFOC-125, 4.7E-13 exp(-2095/T). Units are cm(exp 3)molecule(exp -1) s(exp -1). Substituent effects on OH abstraction rate constants are discussed, and it is shown that the CF3O group has an effect on the OH rate constants similar to that of a fluorine atom. The effects are related to changes in the C-H bond energies of the reactants (and thereby the activation energies) rather than changes in the preexponential factors. On the basis of a correlation of rate constants with bond energies, the respective D(C-H) bond strengths in the three ethers are found to be 102, 104, and 106 kcal/mol, with an uncertainty of about 1 kcal/mol.

Hsu, K.-J.↗
NASA NTRS1988

Temperature dependence of cirrus extinction - Implications for climate feedback

The sensitivities of changes in cirrus optical properties to the changes in global temperature were investigated using data obtained in previous extensive lidar and radiometer observations of cirrus clouds. It is demonstrated how the temperature dependence of cirrus optical properties can be used in climate sensitivity calculations to yield predictions of feedback effects at various cirrus temperatures and how these properties can be parameterized simply for use in the GCM or climate models.

Platt, C. Martin R.↗
NASA NTRS2016

Temperature Dependence of Electrical Resistance of Woven Melt-Infiltrated SiCf/SiC Ceramic Matrix Composites

Recent studies have successfully shown the use of electrical resistance (ER)measurements to monitor room temperature damage accumulation in SiC fiber reinforced SiC matrix composites (SiCf/SiC) Ceramic Matrix Composites (CMCs). In order to determine the feasibility of resistance monitoring at elevated temperatures, the present work investigates the temperature dependent electrical response of various MI (Melt Infiltrated)-CVI (Chemical Vapor Infiltrated) SiC/SiC composites containing Hi-Nicalon Type S, Tyranno ZMI and SA reinforcing fibers. Test were conducted using a commercially available isothermal testing apparatus as well as a novel, laser-based heating approach developed to more accurately simulate thermomechanical testing of CMCs. Secondly, a post-test inspection technique is demonstrated to show the effect of high-temperature exposure on electrical properties. Analysis was performed to determine the respective contribution of the fiber and matrix to the overall composite conductivity at elevated temperatures. It was concluded that because the silicon-rich matrix material dominates the electrical response at high temperature, ER monitoring would continue to be a feasible method for monitoring stress dependent matrix cracking of melt-infiltrated SiC/SiC composites under high temperature mechanical testing conditions. Finally, the effect of thermal gradients generated during localized heating of tensile coupons on overall electrical response of the composite is determined.

Ceramic Matrix Composites↗
NASA NTRS2016

Ab Initio Simulations of Temperature Dependent Phase Stability and Martensitic Transitions in NiTi

For NiTi based alloys, the shape memory effect is governed by a transition from a low-temperature martensite phase to a high-temperature austenite phase. Despite considerable experimental and computational work, basic questions regarding the stability of the phases and the martensitic phase transition remain unclear even for the simple case of binary, equiatomic NiTi. We perform ab initio molecular dynamics simulations to describe the temperature-dependent behavior of NiTi and resolve several of these outstanding issues. Structural correlation functions and finite temperature phonon spectra are evaluated to determine phase stability. In particular, we show that finite temperature, entropic effects stabilize the experimentally observed martensite (B19') and austenite (B2) phases while destabilizing the theoretically predicted (B33) phase. Free energy computations based on ab initio thermodynamic integration confirm these results and permit estimates of the transition temperature between the phases. In addition to the martensitic phase transition, we predict a new transition between the B33 and B19' phases. The role of defects in suppressing these phase transformations is discussed.

nickel titanium↗
NASA NTRS1985

HCl vibrational fundamental band - Line intensities and temperature dependence of self-broadening coefficients

Self-broadening in the vibrational fundamental of HCl is inversely proportional to the temperature for transitions which lie near the Boltzmann rotational maximum and becomes monotonically less temperature-dependent as the rotational quantum number increases. The rotationless transition moment was found to have the value of 5.57 + or - 0.13 x 10 to the -3rd (Debye)-squared and the first Herman-Wallis factor, C = -2.543 + or - 0.019 x 10 to the -2nd.

Chackerian, C., Jr.↗