Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technology modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Updating the Default Anaerobic Digester Technology for Wastewater Sludge Anaerobic Digestion Pathways in R&D GREET 2025 Rev.1

The Greenhouse Gases, Regulated Emissions and Energy Use in Technologies model (R&D GREET) evaluates the life cycle impacts of renewable fuels and materials, including renewable natural gas (RNG) produced from wastewater (WW) sludge. In the sludge-to-RNG pathway, the assumed anaerobic digestion (AD) technology impacts results, such as energy use, greenhouse gases (GHG), and air pollutant emissions. Prior versions assumed sludge was fed through a thermal hydrolysis stage preceding the mesophilic AD (Thermohydrolysis). Such a process is expected to yield biosolids with sufficiently reduced pathogens to qualify for U.S Environmental Protection Agency (EPA) Class A designation. Other technologies, such as mesophilic AD without any advanced pretreatments, typically produce lower quality Class B biosolids but requires a lower energy burden and infrastructure investment. Table 1 displays the available AD technologies and the assumed resulting EPA biosolids class type from each technology. Full descriptions of each technology and their performance differences can be found in previous work.

09 BIOMASS FUELS↗
NASA NTRS1990

A trajectory generation and system characterization model for cislunar low-thrust spacecraft. Volume 2: Technical manual

The documentation of the Trajectory Generation and System Characterization Model for the Cislunar Low-Thrust Spacecraft is presented in Technical and User's Manuals. The system characteristics and trajectories of low thrust nuclear electric propulsion spacecraft can be generated through the use of multiple system technology models coupled with a high fidelity trajectory generation routine. The Earth to Moon trajectories utilize near Earth orbital plane alignment, midcourse control dependent upon the spacecraft's Jacobian constant, and capture to target orbit utilizing velocity matching algorithms. The trajectory generation is performed in a perturbed two-body equinoctial formulation and the restricted three-body formulation. A single control is determined by the user for the interactive midcourse portion of the trajectory. The full spacecraft system characteristics and trajectory are provided as output.

Korsmeyer, David J.↗
NASA NTRS2001

Impacts of Interannual Climate Variability on Agricultural and Marine Ecosystems

The El Nino - Southern Oscillation (ENSO) is the dominant mode of global interannual climate variability, and seems to be the only mode for which current prediction methods are more skillful than climatology or persistence. The Zebiak and Cane intermediate coupled ocean-atmosphere model has been in use for ENSO prediction for more than a decade, with notable success. However, the sole dependence of its original initialization scheme and the improved initialization on wind fields derived from merchant ship observations proved to be a liability during 1997/1998 El Nino event: the deficiencies of wind observations prevented the oceanic component of the model from reaching the realistic state during the year prior to the event, and the forecast failed. Our work on the project was concentrated on the use of satellite data for improving various stages of ENSO prediction technology: model initialization, bias correction, and data assimilation. Close collaboration with other teams of the IDS project was maintained throughout.

Cane, M. A.↗
NASA NTRS2007

Hybrid Modeling Improves Health and Performance Monitoring

Scientific Monitoring Inc. was awarded a Phase I Small Business Innovation Research (SBIR) project by NASA's Dryden Flight Research Center to create a new, simplified health-monitoring approach for flight vehicles and flight equipment. The project developed a hybrid physical model concept that provided a structured approach to simplifying complex design models for use in health monitoring, allowing the output or performance of the equipment to be compared to what the design models predicted, so that deterioration or impending failure could be detected before there would be an impact on the equipment's operational capability. Based on the original modeling technology, Scientific Monitoring released I-Trend, a commercial health- and performance-monitoring software product named for its intelligent trending, diagnostics, and prognostics capabilities, as part of the company's complete ICEMS (Intelligent Condition-based Equipment Management System) suite of monitoring and advanced alerting software. I-Trend uses the hybrid physical model to better characterize the nature of health or performance alarms that result in "no fault found" false alarms. Additionally, the use of physical principles helps I-Trend identify problems sooner. I-Trend technology is currently in use in several commercial aviation programs, and the U.S. Air Force recently tapped Scientific Monitoring to develop next-generation engine health-management software for monitoring its fleet of jet engines. Scientific Monitoring has continued the original NASA work, this time under a Phase III SBIR contract with a joint NASA-Pratt & Whitney aviation security program on propulsion-controlled aircraft under missile-damaged aircraft conditions.

Source record↗
DOE OSTI2021

Summary of Expansions and Updates in GREET ® 2021

The GREET® (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model has been developed by Argonne National Laboratory (Argonne) with the support of the U.S. Department of Energy (DOE). GREET is a life-cycle analysis (LCA) tool, structured to systematically examine the energy and environmental effects of a wide variety of transportation fuels and vehicle technologies in major transportation sectors (i.e., road, air, marine, and rail) and other end-use sectors, and energy systems. Within the transportation sector, GREET covers road, air, water, and rail transportation sub-sectors. Recently, GREET was expanded to cover the building sector. Historically, GREET includes LCA of various materials such as steel, aluminum, cement, and different plastic types. Argonne has expanded and updated the model in various sectors in GREET 2021, and this report provides a summary of the release.

09 BIOMASS FUELS↗
NASA NTRS1991

Electric thruster models for multimegawatt nuclear electric propulsion mission design

Three types of electric thrusters currently under development at JPL have potential to support future missions which utilize multimegawatt nuclear electric propulsion. These electric thrusters are the electron bombardment ion thruster, the magnetoplasmadynamic (MPD) thruster, and the electron-cyclotron-resonance (ECR) thruster. The electron bombardment ion thruster is a relatively mature technology which has been developed for operation at kilowatt power levels but will require new development for application in the multimegawatt regime. The MPD engine represents a technology which may be very well suited to steady-state multimegawatt applications but which has been limited to sub-scale (100's of kW) and pulsed (MW) testing thus far. The ECR plasma engine represents a class of very promising new concepts which are still in the basic research phase of development, but which may possess important fundamental advantages over other electric thruster technologies. Models of these thrusters are described and used to make projections of thrusters specific mass, efficiency, and power handling capacity for operation in the multimegawatt regime.

Leifer, Stephanie D.↗
DOE OSTI2024

End-Use Savings Shapes Measure Documentation: Heat Pump Rooftop Units With Exhaust Air Energy Recovery

This technical report documents the Advanced Rooftop Unit Control End Use Savings Shapes (EUSS) measure, including providing a description of the technology, modeling methods, and the energy savings calculated from applying the measure to applicable across the US commercial building stock using ComStock to quantify its potential. This measure replaces gas furnace and electric resistance rooftop units with high-efficiency variable speed heat pump rooftop units (HP-RTU) that include exhaust air heat or energy recovery. The measure uses the same assumptions and technology as the variable speed HP-RTU measure from EUSS 2023 release 1 but adds energy recovery to precondition outdoor ventilation air to reduce HVAC loads. The HP-RTU compressor lockout temperature is modeled as 0 degrees Fahrenheit; below this temperature, the heat pump is set to shut off. The unit is sized based on the design cooling loads, with backup electric resistance heating addressing any remaining loads including heating hours below the compressor lockout temperature when there is no heat pump heating.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

A Holistic Approach to Procedures

Aviation is a dynamic industry which is constantly changing. These changes require the continuous update of people’s knowledge and skills. A fundamental part of that knowledge and skill is procedures, because procedures form the backbone of aviation operations. On the flightdeck, on the ramp, and in the maintenance shop, procedures and checklists help support pilots, line crews, and mechanics in performing their work effectively, efficiently, and thus -- safely. To design effective and efficient procedures and checklists, one must take into account the full operational context within which these procedures are embedded. This context is defined by the requirements of the technology, the capabilities and limitations of the human operators, and the constraints and affordances of the operational environment. The complexity of this context arises from the interactions of the human, machine, and environment. Procedures are in place to govern those interactions. We present a model of that operational context, namely THE Model (Technology, Human, Environment in the context of a Mission), that lays a foundation for the analysis of each of these elements and their interactions. But procedures have their limitations, and there are risks involved in over-proceduralizing. To understand these limitations and risks, and to determine when to proceduralize and when not, we present the 4P Framework (Practice, Procedures, Policies, Philosophy) as a holistic approach to procedures. This approach brings together the understanding of human behavior, of organizational and operational factors, and of the technologies involved.

procedures↗
NASA NTRS1978

OAST planning model for space systems technology

The NASA Office of Aeronautics and Space Technology (OAST) planning model for space systems technology is described, and some space technology forecasts of a general nature are reported. Technology forecasts are presented as a span of technology levels; uncertainties in level of commitment to project and in required time are taken into account, with emphasis on differences resulting from high or low commitment. Forecasts are created by combining several types of data, including information on past technology trends, the trends of past predictions, the rate of advancement predicted by experts in the field, and technology forecasts already published.

Sadin, S. R.↗
NASA NTRS1988

Spacecraft technology requirements for future NASA missions

By working with advanced planners in the NASA Office of Space Science and Applications (OSSA), a spacecraft technology model has been generated that represents the predominant themes of their respective programs for the next twenty years. This set of missions serves as a base from which a few representative and challenging landmark missions have been extracted to serve as a focal point for identifying the most critical technology issues. Each mission requires significant advances in several technology disciplines in order to be feasible. The mission set selected to serve as a technology focus reflects the increased emphasis within NASA on a potential civil space leadership initiative, and include the Geostationary Earth Observing PLatform from the Planet Earth initiative and the precursor Mars Rover and Sample Return mission from the Mars Exploration Initiative. These missions are briefly described and the key technology requirements are discussed.

Hudson, Wayne R.↗
NASA NTRS2000

Test Cases for Flutter of the Benchmark Models Rectangular Wings on the Pitch and Plunge Apparatus

The supercritical airfoil was chosen as a relatively modem airfoil for comparison. The BOO12 model was tested first. Three different types of flutter instability boundaries were encountered, a classical flutter boundary, a transonic stall flutter boundary at angle of attack, and a plunge instability near M = 0.9 and for zero angle of attack. This test was made in air and was Transonic Dynamics Tunnel (TDT) Test 468. The BSCW model (for Benchmark SuperCritical Wing) was tested next as TDT Test 470. It was tested using both with air and a heavy gas, R-12, as a test medium. The effect of a transition strip on flutter was evaluated in air. The B64AOlO model was subsequently tested as TDT Test 493. Some further analysis of the experimental data for the BOO12 wing is presented. Transonic calculations using the parameters for the BOO12 wing in a two-dimensional typical section flutter analysis are given. These data are supplemented with data from the Benchmark Active Controls Technology model (BACT) given and in the next chapter of this document. The BACT model was of the same planform and airfoil as the BOO12 model, but with spoilers and a trailing edge control. It was tested in the heavy gas R-12, and was instrumented mostly at the 60 per cent span. The flutter data obtained on PAPA and the static aerodynamic test cases from BACT serve as additional data for the BOO12 model. All three types of flutter are included in the BACT Test Cases. In this report several test cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flutter. Cases are selected for classical and stall flutter for the BSCW model, for classical and plunge for the B64AOlO model, and for classical flutter for the BOO12 model. Test Cases are also presented for BSCW for static angles of attack. Only the mean pressures and the real and imaginary parts of the first harmonic of the pressures are included in the data for the test cases, but digitized time histories have been archived. The data for the test cases are available as separate electronic files. An overview of the model and tests is given, the standard formulary for these data is listed, and some sample results are presented.

Robert M Bennett↗
NASA NTRS1979

Large Area Crop Inventory Experiment (LACIE). An overview of the Large Area Crop Inventory Experiment and the outlook for a satellite crop inventory

The author has identified the following significant results. The most important LACIE finding was that the technology worked very well in estimating wheat production in important geographic locations. Based on working through the many successes and shortcomings of LACIE, it can be stated with confidence that: (1) the current technology can successfully monitor what production in regions having similar characteristics to those of the U.S.S.R. wheat areas and the U.S. hard red winter wheat areas; (2) with additional applied research, significant improvements in capabilities to monitor wheat in these and other important production regions can be expected in the near future; (3) the remote sensing and weather effects modeling technology approached used by LACIE is generally applicable to other major crops and crop-producing regions of the world; and (4) with suitable effort, this technology can now advance rapidly and could be widespread use in the late 1980's.

Erb, R. B.↗
DOE OSTI2022

Hydrogen Life-Cycle Analysis in Support of Clean Hydrogen Production

Hydrogen is a basic molecule which is commonly used in the production of chemicals or as an energy carrier or a fuel. Its zero-carbon content means that it does not produce carbon dioxide upon its use. However, depending on the energy source and technology for hydrogen production and delivery, there can be greenhouse gas (GHG) emissions associated with the hydrogen for various end use applications. To provide the largest reduction in GHG emissions, hydrogen produced from clean energy sources should be used. As concerns regarding climate change grows, there is an increasing focus on economic production of clean hydrogen to displace less climate neutral sources of hydrogen. However, there are many different methods of hydrogen production with unique processes that result in different levels of life cycle GHG emissions of hydrogen production and its end use applications. Therefore, a comprehensive life cycle accounting methodology that takes all these factors into account is required. he GREET ® (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model was first developed in 1995 by Argonne National Laboratory with the support from the various offices of the U.S. Department of Energy (DOE). GREET provides in-depth Life Cycle Analysis (LCA) simulations for a variety of products and is available as an Excel spreadsheet (GREET Excel), or as an application (GREET .Net). Both versions are available for public download at no cost. This report accompanies GREET 2022 release to describe the major updates and expansions to the hydrogen technology pathways, and to provide data sources and sample carbon intensity results for each of the pathways.

08 HYDROGEN↗
DOE OSTI2021

WOMBAT (Windfarm Operations and Maintenance cost-Benefit Analysis Tool) WISDEM® [SWR-21-68]

The windfarm operations and maintenance cost-benefit analysis tool (WOMBAT) is software to simulate the operations and maintenance phase of either onshore or offshore windfarms. WOMBAT is a medium-fidelity tool that is designed to model turbine, cable, and substation failures at the subassembly level, but is flexible enough that individual component or asset-level modeling can also be performed. WOMBAT enables users to model technological improvements, the use of a wide range of service equipment from drone repairs and remote resets to heavy lift vessels and crawler cranes, to analyze cost trends with varying trade-offs in conjunction with energy production, availability and a growing range of metrics. This library provides a tool to simulate the operation and maintenance phase (O&M) of distributed, land-based, and offshore windfarms using a discrete event simulation framework. WOMBAT is written around the SimPy discrete event simulation framework. Additionally, this is supported using a flexible and modular object-oriented code base, which enables the modeling of arbitrarily large (or small) windfarms with as many or as few failure and maintenance tasks that can be encoded. Please note that this is still heavily under development, so you may find some functionality to be incomplete at the current moment, but rest assured the functionality is expanding. With that said, it would be greatly appreciated for issues or PRs to be submitted for any improvements at all, from fixing typos (guaranteed to be a few) to features to testing. Also available at: https://pypi.org/project/wombat/

Cooperman, Aubryn↗
DOE OSTI2025

A Life Cycle Analysis Framework for Point Source Capture Systems

NETL studies the costs and benefits of PSC for electricity, industry, and mobile applications. Mobile point source capture (MPSC) and storage applied to freight modes captures emissions directly from exhaust. This poster presents a framework for conducting LCA of PSC systems applied to heavy-duty trucks, freight trains, and marine vessels. The framework defines a wheels-to-storage (gate-to-grave) boundary, including energy demands (electricity, heat, and cooling requirements), solvent use and cycling, onboard system components, carbon storage in a saline aquifer, and upstream manufacturing impacts for equipment, with a suggested functional unit of 1 tonne-km. Potential data sources for analysis include material, energy, and operational data from Oak Ridge National Laboratory, GREET (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model, and scientific literature. The suggested analytical approach includes comparison to publicly available business-as-usual systems without capture across all modes of transportation, sensitivity to composition of the capture solvent, and sensitivity to capture rate variation, all of which would support a wholistic PSC business case analysis. For future consideration, analysis can be augmented with consideration of different sources of electricity (e.g., nuclear), fuel substitution, deploying supportive infrastructure such as pipeline offloading points, and downstream applications like enhanced oil recovery (EOR).

life cycle analysis (LCA)↗
NASA NTRS1995

An object-oriented, technology-adaptive information model

The primary objective was to develop a computer information system for effectively presenting NASA's technologies to American industries, for appropriate commercialization. To this end a comprehensive information management model, applicable to a wide variety of situations, and immune to computer software/hardware technological gyrations, was developed. The model consists of four main elements: a DATA_STORE, a data PRODUCER/UPDATER_CLIENT and a data PRESENTATION_CLIENT, anchored to a central object-oriented SERVER engine. This server engine facilitates exchanges among the other model elements and safeguards the integrity of the DATA_STORE element. It is designed to support new technologies, as they become available, such as Object Linking and Embedding (OLE), on-demand audio-video data streaming with compression (such as is required for video conferencing), Worldwide Web (WWW) and other information services and browsing, fax-back data requests, presentation of information on CD-ROM, and regular in-house database management, regardless of the data model in place. The four components of this information model interact through a system of intelligent message agents which are customized to specific information exchange needs. This model is at the leading edge of modern information management models. It is independent of technological changes and can be implemented in a variety of ways to meet the specific needs of any communications situation. This summer a partial implementation of the model has been achieved. The structure of the DATA_STORE has been fully specified and successfully tested using Microsoft's FoxPro 2.6 database management system. Data PRODUCER/UPDATER and PRESENTATION architectures have been developed and also successfully implemented in FoxPro; and work has started on a full implementation of the SERVER engine. The model has also been successfully applied to a CD-ROM presentation of NASA's technologies in support of Langley Research Center's TAG efforts.

Anyiwo, Joshua C.↗
NASA NTRS2011

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA) that were developed using the Aspen Custom Modeler and Aspen Plus process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Allada, Rama Kumar↗
NASA NTRS2012

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA). These dynamic models were developed using the Aspen Custom Modeler (Registered TradeMark) and Aspen Plus(Registered TradeMark) process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Allada, Rama Kumar↗