SEARCH · Engineering Papers

Results for “system strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Visualization of Multifractal Superconductivity in a Two-Dimensional Transition Metal Dichalcogenide in the Weak-Disorder Regime

Eigenstate multifractality is a distinctive feature of noninteracting disordered metals close to a metal–insulator transition, whose properties are expected to extend to superconductivity. While multifractality in three dimensions (3D) only develops near the critical point for specific strong-disorder strengths, multifractality in 2D systems is expected to be observable even for weak disorder. Here we provide evidence for multifractal features in the superconducting state of an intrinsic, weakly disordered single-layer NbSe 2 by means of low-temperature scanning tunneling microscopy/spectroscopy. The superconducting gap, characterized by its width, depth, and coherence peaks’ amplitude, shows a characteristic spatial modulation coincident with the periodicity of the quasiparticle interference pattern. The strong spatial inhomogeneity of the superconducting gap width, proportional to the local order parameter in the weak-disorder regime, follows a log-normal statistical distribution as well as a power-law decay of the two-point correlation function, in agreement with our theoretical model. Furthermore, the experimental singularity spectrum f(α) shows anomalous scaling behavior typical from 2D weakly disordered systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Using Prompt Neutron Decay Constant Measurements to Obtain Additional Kinetics Information

Prompt neutron decay constant measurements are typically used to infer the prompt neutron lifetime in a chain-reacting system, but these measurements include much more information about the kinetics of the system. This work focuses specifically on the Rossi-α method of measuring the prompt neutron decay constant. The Rossi-α system of equations consists of five unknown parameters. With five unknowns and three equations, the system of equations solved by the Rossi-α measurement is under-determined. It has been postulated that a well posed problem can be formulated using independent measurement configurations on a single system. The external source strength, the effective delayed neutron fractions, and Diven’s parameter do not typically change for different configurations of a single experiment. If good detector geometry is chosen, the detector efficiency does not change for multiple measurements of a single experiment using Rossi-α measurements. By making these assumptions, there are only two unique variables. This knowledge can be used to solve for most of the unique parameters using two independent, unique Rossi-α measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

R-matrix calculations for opacities: I. Methodology and computations

Abstract An extended version of the R -matrix methodology is presented for calculation of radiative parameters for improved plasma opacities. Contrast and comparisons with existing methods primarily relying on the distorted wave approximation are discussed to verify accuracy and resolve outstanding issues, particularly with reference to the opacity project (OP). Among the improvements incorporated are: (i) large-scale Breit–Pauli R -matrix calculations for complex atomic systems including fine structure, (ii) convergent close coupling wave function expansions for the ( e + ion) system to compute oscillator strengths and photoionization cross sections, (iii) open and closed shell iron ions of interest in astrophysics and experiments, (iv) a treatment for plasma broadening of autoionizing resonances as function of energy-temperature-density dependent cross sections, (v) a ‘top-up’ procedure to compare convergence with R -matrix calculations for highly excited levels, and (vi) spectroscopic identification of resonances and bound ( e + ion) levels. The present R -matrix monochromatic opacity spectra are fundamentally different from OP and lead to enhanced Rosseland and Planck mean opacities. An outline of the work reported in other papers in this series and those in progress is presented. Based on the present re-examination of the OP work, opacities of heavy elements might require revisions in high temperature-density plasma sources.

Pradhan, A. K. (ORCID:0000000187753643)↗

DOE OSTI2021

Hierarchical excitations from correlated spin tetrahedra on the breathing pyrochlore lattice

The hierarchy of the coupling strengths in a physical system often engenders an effective model at low energies where the decoupled high-energy modes are integrated out. Here, using neutron scattering, we show that the spin excitations in the breathing pyrochlore lattice compound CuInCr 4 S 8 are hierarchical and can be approximated by an effective model of correlated tetrahedra at low energies. At higher energies, intratetrahedron excitations together with strong magnon-phonon couplings are observed, which suggests the possible role of the lattice degree of freedom in stabilizing the spin tetrahedra. Finally, our work illustrates the spin dynamics in CuInCr 4 S 8 and demonstrates a general effective-cluster approach to understand the dynamics on the breathing-type lattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Atom Interferometry with Floquet Atom Optics

Floquet engineering offers a compelling approach for designing the time evolution of periodically driven systems. We implement a periodic atom-light coupling to realize Floquet atom optics on the strontium 1 S 0 - 3 P 1 transition. These atom optics reach pulse efficiencies above 99.4% over a wide range of frequency offsets between light and atomic resonance, even under strong driving where this detuning is on the order of the Rabi frequency. Moreover, we use Floquet atom optics to compensate for differential Doppler shifts in large momentum transfer atom interferometers and achieve state-of-the-art momentum separation in excess of 400 ℏ⁢k. In conclusion, this technique can be applied to any two-level system at arbitrary coupling strength, with broad application in coherent quantum control.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2023

Crystal plasticity finite element simulation of lattice rotation and x-ray diffraction during laser shock compression of tantalum

Here we present a crystal plasticity model tailored for high-pressure, high-strain-rate conditions that uses a multiscale treatment of dislocation-based slip kinetics. We use this model to analyze the pronounced plasticity-induced lattice rotations observed in shock-compressed polycrystalline tantalum via in situ x-ray diffraction. By making direct comparisons between experimentally measured and simulated texture evolution, we can explain how the details of the underlying slip kinetics control the degree of lattice rotation that ensues. Specifically, we show that only the highly nonlinear kinetics caused by dislocation nucleation can explain the magnitude of the rotation observed under shock compression. We demonstrate a good fit between our crystal plasticity model and x-ray diffraction data and exploit the data to quantify the dislocation nucleation rates that are otherwise poorly constrained by experiment in the dynamic compression regime.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Etching with electron beam-generated plasmas: Selectivity versus ion energy in silicon-based films

In the ideal case, plasma-enhanced atomic layer etching enables the ability to not only remove one monolayer of material but also leave adjacent layers undamaged. This dual mandate requires fine control over the flux of species to ensure efficacy, while maintaining an often arduously low ion energy. Electron beam-generated plasmas are well-suited for etching at low ion energies as they are generally characterized by highly charged particle densities (10 10 –10 11 cm –3 ) and low electron temperatures (<1.0 eV), which provide the ability to deliver a large flux of ions whose energies are <5 eV. Raising the ion energy with substrate biasing thus enables process control over an energy range that extends down to values commensurate with the bond strength of most material systems. In this work, we discuss silicon nitride etching using pulsed, electron beam-generated plasmas produced in argon-SF6 backgrounds. We pay particular attention to the etch rates and selectivity versus oxidized silicon nitride and polycrystalline silicon as a function of ion energy from a few eV up to 50 eV. Here, we find the blanket etch rate of Si 3 N 4 to be in the range of 1 A/s, with selectivities (versus SiO 2 and poly-Si) greater than 10:1 when ion energies are below 30 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Progress on Design and Production of Oxide Dispersion–Strengthened Alumina-Forming Austenitic Alloys for Nuclear Applications

Alumina-forming austenitic (AFA) alloys are a promising class of nuclear materials due to their high-temperature oxidation/corrosion resistance and mechanical properties. Unfortunately, these alloys are limited in use for core material applications, specifically in their use as nuclear fuel cladding. Improving these alloys through a fine dispersion of oxide precipitates and thus increasing the effective irradiation sink strength of the alloy system may mitigate many of the degradation phenomena expected during alloy deployment (such as high-temperature helium embrittlement for lead-cooled fast reactor applications). This work package has started using a combination of conventional and advanced manufacturing approaches to the fabrication of oxide dispersion–strengthened (ODS) AFA materials. As such, this report summarizes progress to date in the fabrication of new compositions of these ODS AFA materials with a focus on reactor-specific design and a multifaceted manufacturing approach. Two different compositions of AFA gas-atomized powders were procured, and 200 g of each have been prepared using mechanical alloying with the expectation of high-temperature consolidation in Q1 of FY24. In addition, an approach to use reactive cover gases to promote additional precipitate formation has been developed for implementation in FY24 as a direct comparison with conventionally manufactured alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Evaluating turbulence models at high energy densities

The RESHOCK campaign at Lawrence Livermore National Laboratory has been working on increasing our understanding of the evolution of turbulent, unstable plasma interfaces which are applicable in various HED applications including ICF implosions. A common approach to model such interfaces involves the use of Renolds-Averaged-Navier-Stokes (RANS) models whose parameters have been constrained by theory and experiments. These parameter sets are not unique and the applicability of one set of tuned model parameters to systems with differing shock strengths or material densities has not been well tested. Our new NIF experiments, along with related studies of turbulent shear flows, provide data and model validation for plasma interfaces in the HED regime. Our experiments measure mixing-layer width at an unstable interface in the plasma regime and are specifically designed to challenge mix models of the Reynolds-Averaged-Navier-Stokes (RANS) type where turbulence is assumed to be fully developed, i.e. the flow exhibits a broad spectrum of length scales without memory of the initial condition.4 We utilize precise control of the initial interface conditions (densities on both sides of the interface, an initial rippled perturbation pattern consisting of equally weighted wavelengths between 10 and 20 microns, and initial material compositions) along with a repeatable drive history

36 MATERIALS SCIENCE↗

DOE OSTI2026

Grid and Wind Transient Ride Through Assessment of Type-5 Synchronous Wind Turbine

The integration of the inverter-based renewable energy resources is increasing and replacing conventional synchronous generators in the evolving bulk power system (BPS), impacting the system inertia along the way. Also, the limited over-current capability of power electronic converters continues to deteriorate the grid strength of the evolving power systems. Type-5 wind turbines have the potential to mitigate these problems because this configuration interfaces with the grid through a synchronous generator; hence, its operation and consequent grid impacts might mimic the conventional synchronous generator. The drivetrain of this type of turbines, however, is different from the more common Type-3 and Type-4 turbines. A hydraulic torque converter and gearbox with torque limiting feature are integral parts of a Type-5 wind turbine drivetrain, to isolate the wind speed variations at the wind turbine rotor from the grid connected generator side. This supports the synchronous operation of the generator. However, high fidelity models of Type-5 wind turbine drivetrain including these core components are not openly and widely available for grid integration and transient stability studies. Moreover, Type-5 turbines are not commonly deployed and hence its power generation and frequency stability characteristics are not widely publicized. This hinders appropriate assessment of Type-5 wind power plant's contribution to bulk grid resilience. This work provides transient stability assessment of a standalone Type-5 wind turbine. Normal operation and grid transient studies are performed to see the step load change and wind speed disturbance impacts on the Type-5 drivetrain and generation dispatch. Preliminary results show that Type-5 wind turbines can support load changes of between 0.6 p.u to 1.15 p.u. Beyond this point, the synchronization of the generator starts to deviate from its set point.

17 - WIND ENERGY↗

DOE OSTI2023

Guanajuato Policy Options for Land Transportation Greenhouse Gas Reduction [Slides]

NREL consulted the Mexican state of Guanajuato to help them identify and prioritize policies that are specifically applicable to their land transportation system and help them meet their greenhouse gas (GHG) reduction goals. Three focus groups were held across Guanajuato to get the input from a wide variety of users of the transportation system. These focus groups performed a SWOT (strengths, weaknesses, opportunities and threats) analysis of Guanajuato's transportation system and logged the policy goals of participants. NREL then developed a menu of policy options that have been used successfully in relevant countries and prioritized these policies based on the weighted input from stakeholder groups. The most applicable policies were a paid parking strategy, regional transit master plan, and expanded bike and pedestrian infrastructure. Case studies of these three policies, plus a few more, were then presented to inform Guanajuato of how these policies could successfully be implemented. Finally, the GHG reductions for five of the most applicable policies were estimated to reduce emissions from Guanajuato's land transportation system nearly 40% below business-as-usual emissions by 2050.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

High-throughput quantification of quasistatic, dynamic and spall strength of materials across 10 orders of strain rates

Abstract The response of metals and their microstructures under extreme dynamic conditions can be markedly different from that under quasistatic conditions. Traditionally, high strain rates and shock stresses are achieved using cumbersome and expensive methods such as the Kolsky bar or large spall experiments. These methods are low throughput and do not facilitate high-fidelity microstructure–property linkages. In this work, we combine two powerful small-scale testing methods, custom nanoindentation, and laser-driven microflyer (LDMF) shock, to measure the dynamic and spall strength of metals. The nanoindentation system is configured to test samples from quasistatic to dynamic strain-rate regimes. The LDMF shock system can test samples through impact loading, triggering spall failure. The model material used for testing is magnesium alloys, which are lightweight, possess high-specific strengths, and have historically been challenging to design and strengthen due to their mechanical anisotropy. We adopt two distinct microstructures, solutionized (no precipitates) and peak-aged (with precipitates) to demonstrate interesting upticks in strain-rate sensitivity and evolution of dynamic strength. At high shock-loading rates, we unravel an interesting paradigm where the spall strength vs. strain rate of these materials converges, but the failure mechanisms are markedly different. Peak aging, considered to be a standard method to strengthen metallic alloys, causes catastrophic failure, faring much worse than solutionized alloys. Our high-throughput testing framework not only quantifies strength but also teases out unexplored failure mechanisms at extreme strain rates, providing valuable insights for the rapid design and improvement of materials for extreme environments.

Eswarappa Prameela, Suhas (ORCID:0000000334530184)↗

DOE OSTI2020

Experimental Test Bed to Enable Realistic Evaluations for Direct Transfer Trip Relaying via Private Wireless LTE Communications

Increasing penetration levels of inverter-based distributed energy resources (DERs) in distribution systems are creating challenges in system operation. Currently, wired or proprietary wireless communications are used by advanced distribution management systems (ADMS) to detect the state of the system and control the DERs for optimal operation. Wireless communications are an alternative solution that can enable connectivity between the dispersed assets used in distribution system applications. This paper demonstrates an experimental test bed to enable the realistic evaluation of communications system characteristics for direct transfer trip (DTT) relaying of a photovoltaic inverter system using a private 900-MHz spectrum wireless LTE network. Private LTE network communications can be deployed to many remote DERs and other grid-edge devices to prevent costly infrastructure upgrades across distribution systems. In addition, this paper provides a framework for evaluating the impact of signal strength and network traffic in communications systems. The results shown develop a better understanding of the best practices for using LTE communications systems across multiple utility applications, such as protective relaying, voltage regulation, and supervisory control and data acquisition system messages.

900-MHz LTE network↗

DOE OSTI2020

Experimental Test Bed to Enable Realistic Evaluations for Direct Transfer Trip Relaying via Private Wireless LTE Communications: Preprint

900 MHz LTE network↗

DOE OSTI2021

Experimental Test Bed to Enable Realistic Evaluations for Direct Transfer Trip Relaying via Private Wireless LTE Communications

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Dynamical instability in multi-orbiter systems with gas friction

ABSTRACT Closely packed multiplanet systems are known to experience dynamical instability if the spacings between the planets are too small. Such instability can be tempered by the frictional forces acting on the planets from gaseous discs. A similar situation applies to stellar-mass black holes embedded in active galactic nuclei discs around supermassive black holes. We use N-body integrations to evaluate how the frictional damping of orbital eccentricity affects the growth of dynamical instability for a wide range of K (the difference in the planetary semimajor axes in units of the mutual Hill radius) and (unequal) planet masses. We find that, in general, the stable region (large K) and unstable region (small K) are separated by a “grey zone”, where the (in)stability is not guaranteed. We report the numerical values of the critical spacing for stability Kcrit and the “grey zone” range in different systems, and provide fitting formulae for arbitrary frictional forcing strength. We show that the stability of a system depends on the damping time-scale τ relative to the zero-friction instability growth time-scale tinst: two-planet systems are stable if tinst ≳ τ; three-planet systems require tinst ≳ 10τ−100τ. When K is sufficiently small, tinst can be less than the synodic period between the planets, which makes frictional stabilization unlikely to occur. As K increases, tinst tends to grow exponentially, but can also fluctuate by a few orders of magnitude. We also devise a linear map to analyse the dynamical instability of the “planet + test mass” system, and find qualitative agreement with N-body simulations.

Li, Jiaru (ORCID:0000000155507421)↗

DOE OSTI2023

Strongly Coupled Plasmon and Phonon Polaritons as Seen by Photon and Electron Probes

The ability to control and modify infrared excitations in condensed matter is of both fundamental and applied interest. Here we explore a system supporting low-energy excitations, in particular, mid-infrared localized plasmon modes and phonon polaritons that are tuned to be strongly coupled. We study the coupled modes by using far-field infrared spectroscopy, state-of-the-art monochromated electron energy-loss spectroscopy, numerical simulations, and analytical modeling. Here we demonstrate that the electron probe facilitates a precise characterization of polaritons constituting the coupled system, and enables an active control over the coupling and the resulting sample response both in frequency and space. Although far-field optical spectra can be substantially different from near-field electron energy-loss spectra, we show that a direct comparison is possible via postprocessing and right positioning of the electron beam. The resulting spectra allow us to evaluate the key parameters of the coupled system, such as the coupling strength, which we demonstrate to be probe independent. Our work establishes a rigorous description of the spectral features observed in light- and localized electron-based spectroscopies, which can be extended to the analysis of analogous optical systems with applications in heat management and electromagnetic field concentration or nanofocusing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Quantum Monte Carlo Calculations of Magnetic Form Factors in Light Nuclei

Here, we present Quantum Monte Carlo calculations of magnetic form factors in A = 6-10 nuclei, based on Norfolk two- and three-nucleon interactions, and associated one- and two-body electromagnetic currents. Agreement with the available experimental data for 6 Li, 7 Li, 9 Be and 10 B up to values of momentum transfer q ~ 3 fm -1 is achieved when two-nucleon currents are accounted for. We present a set of predictions for the magnetic form factors of 7 Be, 8 Li, 9 Li, and 9 C. In these systems, two body currents account for ~ 40-60% of the total magnetic strength. Measurements in any of these radioactive systems would provide valuable insights on the nuclear magnetic structure emerging from the underlying many-nucleon dynamics. A particularly interesting case is that of 7 Be, as it would enable investigations of the magnetic structure of mirror nuclei

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗