Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Interaction of feel system and flight control system dynamics on lateral flying qualities

An investigation of feel system and flight control system dynamics on lateral flying qualities was conducted using the variable stability USAF NT-33 aircraft. Experimental variations in feel system natural frequency, force-deflection gradient, control system command architecture type, flight control system filter frequency, and control system delay were made. The experiment data include pilot ratings using the Cooper-Harper (1969) rating scale, pilot comments, and tracking performance statistic. Three test pilots served as evaluators. The data indicate that as the feel system natural frequency is reduced lateral flying qualities degrade. At the slowest feel system frequency, the closed-loop response becomes nonlinear with a 'bobweight' effect apparent in the feel system. Feel system influences were essentially independent of the control system architecture. The flying qualities influence due to the feel system was different than when the identical dynamic systenm was used as a flight control system element.

Bailey, Randall E.↗
NASA NTRS1995

Robust integrated neurocontroller for complex dynamic systems

The goal of this research effort is to develop an integrated control software environment for the purpose of creating an intelligent neurocontrol system. The system will be capable of estimating states, identifying parameters, diagnosing conditions, planning control strategies, and producing intelligent control actions. The distinct features of such control system are adaptability and on-line learning capability. The proposed system will be flexible to allow structure adaptability to account for changes in the dynamic system such as sensory failures and/or component degradations. The developed system should learn system uncertainties and changes, as they occur, while maintaining minimal control level on the dynamic system. The research activities set to achieve the research objective are summarized by the following general items: (1) Development of a system identifier or diagnostic system; (2) Development of a robust neurocontroller system, and; (3) Integration of above systems to create a robust Integration Control system (RIC-system). Two contrary approaches are investigated in this research: classical (traditional) design approach, and the simultaneous design approach. However, in both approaches neural network is the base for the development of different functions of the system. The two resulting designs will be tested and simulation results will be compared for better possible implementation.

Zein-Sabbato, S.↗
NASA NTRS1996

Robust Integrated Neurocontroller for Complex Dynamic Systems

The goal of this research effort is to develop an integrated control software environment for the purpose of creating an intelligent neurocontrol system. The system will be capable of estimating states, identifying parameters, diagnosing conditions, planning control strategies, and producing intelligent control actions. The distinct features of such control system are: adaptability and on-line learning capability. The proposed system will be flexible to allow structure adaptability to account for changes in the dynamic system such as: sensory failures and/or component degradations. The developed system should learn system uncertainties and changes, as they occur, while maintaining minimal control level on the dynamic system. The research activities set to achieve the research objective are summarized by the following general items: (1) Development of a system identifier or diagnostic system, (2) Development of a robust neurocontroller system, and 3. Integration of above systems to create a Robust Integrated Control system (RIC-system). Two contrary approaches are investigated in this research: classical (traditional) design approach, and the simultaneous design approach. However, in both approaches neural network is the base for the development of different functions of the system. The two resulting designs will be tested and simulation results will be compared for better possible implementation.

Zein-Sabatto, S.↗
NASA NTRS1991

Robustified time-optimal control of uncertain structural dynamic systems

A new approach for computing open-loop time-optimal control inputs for uncertain linear dynamical systems is developed. In particular, the single-axis, rest-to-rest maneuvering problem of flexible spacecraft in the presence of uncertainty in model parameters is considered. Robustified time-optimal control inputs are obtained by solving a parameter optimization problem subject to robustness constraints. A simple dynamical system with a rigid-body mode and one flexible mode is used to illustrate the concept.

Liu, Qiang↗
NASA NTRS1996

Guidance of Nonlinear Nonminimum-Phase Dynamic Systems

The research work has advanced the inversion-based guidance theory for: systems with non-hyperbolic internal dynamics; systems with parameter jumps; and systems where a redesign of the output trajectory is desired. A technique to achieve output tracking for nonminimum phase linear systems with non-hyperbolic and near non-hyperbolic internal dynamics was developed. This approach integrated stable inversion techniques, that achieve exact-tracking, with approximation techniques, that modify the internal dynamics to achieve desirable performance. Such modification of the internal dynamics was used (a) to remove non-hyperbolicity which is an obstruction to applying stable inversion techniques and (b) to reduce large preactuation times needed to apply stable inversion for near non-hyperbolic cases. The method was applied to an example helicopter hover control problem with near non-hyperbolic internal dynamics for illustrating the trade-off between exact tracking and reduction of preactuation time. Future work will extend these results to guidance of nonlinear non-hyperbolic systems. The exact output tracking problem for systems with parameter jumps was considered. Necessary and sufficient conditions were derived for the elimination of switching-introduced output transient. While previous works had studied this problem by developing a regulator that maintains exact tracking through parameter jumps (switches), such techniques are, however, only applicable to minimum-phase systems. In contrast, our approach is also applicable to nonminimum-phase systems and leads to bounded but possibly non-causal solutions. In addition, for the case when the reference trajectories are generated by an exosystem, we developed an exact-tracking controller which could be written in a feedback form. As in standard regulator theory, we also obtained a linear map from the states of the exosystem to the desired system state, which was defined via a matrix differential equation.

Devasia, Santosh↗
NASA NTRS1987

Coherent structures and dynamical systems

Any flow of a viscous fluid has a finite number of degrees of freedom, and can therefore be seen as a dynamical system. A coherent structure can be thought of as a lower dimensional manifold in whose neighborhood the dynamical system spends a substantial fraction of its time. If such a manifold exists, and if its dimensionality is substantially lower that that of the full flow, it is conceivable that the flow could be described in terms of the reduced set of degrees of freedom, and that such a description would be simpler than one in which the existence of structure was not recognized. Several examples are briefly summarized.

Jimenez, Javier↗
NASA NTRS1991

A dynamical systems analysis of the kinematics of time-periodic vortex shedding past a circular cylinder

Computer flow simulation aided by dynamical systems analysis is used to investigate the kinematics of time-periodic vortex shedding past a two-dimensional circular cylinder in the context of the following general questions: (1) Is a dynamical systems viewpoint useful in the understanding of this and similar problems involving time-periodic shedding behind bluff bodies; and (2) Is it indeed possible, by adopting such a point of view, to complement previous analyses or to understand kinematical aspects of the vortex shedding process that somehow remained hidden in previous approaches. We argue that the answers to these questions are positive. Results are described.

Ottino, Julio M.↗
NASA NTRS1971

Reachable sets for linear dynamical systems.

The properties of reachable sets for linear dynamical systems for specified control sets are discussed. Iterative procedures for determining numerical approximations of the reachable set are suggested and methods of obtaining an admissible control function which transfers an initial state to as near a prescribed target as possible is described. The problem of reachability with multiple control constraints is discussed and certain aspects of reachability for time-invariant systems with adjustable parameters is considered.

Pecsvaradi, T.↗
NASA NTRS1976

Uncertain dynamical systems: A differential game approach

A class of dynamical systems in a conflict situation is formulated and discussed, and the formulation is applied to the study of an important class of systems in the presence of uncertainty. The uncertainty is deterministic and the only assumption is that its value belongs to a known compact set. Asymptotic stability is fully discussed with application to variable structure and model reference control systems.

Gutman, S.↗
NASA NTRS1967

Analysis of dynamic systems with DAP4H computer program

Dynamic Analysis Program, FORTRAN 4 Level H /DAP4H/, developed from 27 subprograms, features liberal use of the subroutines, subprograms, and skeletonization to minimize programming effort in formulating models of new systems and components. It formulates mathematical models of complex mechanical, pneumatic, and hydraulic dynamic systems.

Absalom, J. G.↗
NASA NTRS2012

Landsat Data Continuity Mission (LDCM) Flight Dynamics System (FDS)

The Landsat Data Continuity Mission (LDCM) will be launched in January 2013 to continue the legacy of Landsat land imagery collection that has been on-going for the past 40 years. While the overall mission and science goals are designed to produce the SAME data over the years, the ground systems designed to support the mission objectives have evolved immensely. The LDCM Flight Dynamics System (FDS) currently being tested and deployed for operations is highly automated and well integrated with the other ground system elements. The FDS encompasses the full suite of flight dynamics functional areas, including orbit and attitude determination and prediction, orbit and attitude maneuver planning and execution, and planning product generation. The integration of the orbit, attitude, maneuver, and products functions allows a very smooth flow for daily operations support with minimal input needed from the operator. The system also provides a valuable real-time component that monitors the on-board orbit and attitude during every ground contact and will autonomously alert the Flight Operations Team (FOT) personnel when any violations are found. This paper provides an overview of the LDCM Flight Dynamics System and a detailed description of how it is used to support space operations. For the first time on a Goddard Space Flight Center (GSFC)-managed mission, the ground attitude and orbits systems are fully integrated into a cohesive package. The executive engine of the FDS permits three levels of automation: low, medium, and high. The high-level, which will be the standard mode for LDCM, represents nearly lights-out operations. The paper provides an in-depth look at these processes within the FDS in support of LDCM in all mission phases.

Good, Susan M.↗
NASA NTRS1974

Parameter identifiability of linear dynamical systems

It is assumed that the system matrices of a stationary linear dynamical system were parametrized by a set of unknown parameters. The question considered here is, when can such a set of unknown parameters be identified from the observed data? Conditions for the local identifiability of a parametrization are derived in three situations: (1) when input/output observations are made, (2) when there exists an unknown feedback matrix in the system and (3) when the system is assumed to be driven by white noise and only output observations are made. Also a sufficient condition for global identifiability is derived.

Glover, K.↗
DOE OSTI2025

Acceleration of Power System Dynamic Simulations Using a Deep Equilibrium Layer and Neural ODE Surrogate

The dominant paradigm for power system dynamic simulation is to build system-level simulations by combining physics-based models of individual components. The sheer size of the system along with the rapid integration of inverter-based resources exacerbates the computational burden of running time domain simulations. Here, in this paper, we propose a data-driven surrogate model based on implicit machine learningspecifically deep equilibrium layers and neural ordinary differential equationsto learn a reduced order model of a portion of the full underlying system. The data-driven surrogate achieves similar accuracy and reduction in simulation time compared to a physics-based surrogate, without the constraint of requiring detailed knowledge of the underlying dynamic models. This work also establishes key requirements needed to integrate the surrogate into existing simulation workflows; the proposed surrogate is initialized to a steady state operating point that matches the power flow solution by design.

Neural ordinary differential equations↗