Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sulfides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Detection of 2.6-millimeter radiation probably due to nitrogen sulfide

Results are reported for observations of millimeter-wavelength radiation in Sgr B2 at two frequencies corresponding to the transitions between the J = 5/2 and J = 3/2 Lambda-doublet sublevels in the 2 Pi(1/2) state of nitrogen sulfide. Difficulties in making a positive identification of the source of this radiation are discussed which result from the apparently anomalous ratio of the hyperfine components. However, it is noted that observations of the d-state by Gottlieb et al. (1975) showing the hyperfine components more exactly in their optically thin ratio confirm that the observed radiation is due to nitrogen sulfide.

Kuiper, T. B. H.↗
NASA NTRS1975

A search for sulfide-bearing areas using LANDSAT-1 data and digital image-processing techniques

Two experiments were conducted using LANDSAT-1 multispectral scanner data to identify ground features that are indicators of sulfide-bearing rock. A nearby known sulfide deposit was used as a control. In the first experiment, false-color composites were examined visually to locate possible favorable areas; in the second, favorable areas were classified by digital-computer processing. The results of the experiment show that outcrops of hydrothermally altered and mineralized rock can be identified from LANDSAT-1 data under favorable conditions. The empirical method of digital-computer classification of the multispectral scanner data was relatively unrefined and rapid. The five mineralized prospecting sites identified are in locations that the geologist would not have selected as favorable on the basis of geologic knowledge or photogeologic interpretation at the time of the investigation.

Schmidt, R. G.↗
NASA NTRS1975

Stopping cross sections for 0.25-3.0-MeV He-4 ions in cadmium sulfide

Stopping cross sections of He-4 ions with energies between 0.25 and 3.0 MeV have been measured for cadmium sulfide with a probable error of plus or minus 7% to 8%. The experimental method utilized the Rutherford backscattering technique and measured the energy loss of elastically scattered He-4 ions from films of cadmium sulfide sputtered on carbon substrates. The experimental data are compared with recent experimental and theoretical results.

Miller, W. E.↗
NASA NTRS1976

Absolute rate parameters for the reaction of ground state atomic oxygen with dimethyl sulfide and episulfide

It is pointed out that the investigated reaction of oxygen with dimethyl sulfide may play an important role in photochemical smog formation and in the chemical evolution of dense interstellar clouds. Kinetic data were obtained with the aid of the flash photolysis-resonance fluorescence method. The photodecomposition of molecular oxygen provided the oxygen atoms for the experiments. The decay of atomic oxygen was studied on the basis of resonance fluorescence observations. Both reactions investigated were found to be fast processes. A negative temperature dependence of the rate constants for reactions with dimethyl sulfide was observed.

Lee, J. H.↗
NASA NTRS1978

Hydrogen attack - Influence of hydrogen sulfide

An experimental study is conducted on 12.5-mm-thick SAE 1020 steel (plain carbon steel) plate to assess hydrogen attack at room temperature after specimen exposure at 525 C to hydrogen and a blend of hydrogen sulfide and hydrogen at a pressure of 3.5 MN/sq m for exposure times up to 240 hr. The results are discussed in terms of tensile properties, fissure formation, and surface scales. It is shown that hydrogen attack from a high-purity hydrogen environment is severe, with the formation of numerous methane fissures and bubbles along with a significant reduction in the room-temperature tensile yield and ultimate strengths. However, no hydrogen attack is observed in the hydrogen/hydrogen sulfide blend environment, i.e. no fissure or bubble formation occurred and the room-temperature tensile properties remained unchanged. It is suggested that the observed porous discontinuous scale of FeS acts as a barrier to hydrogen entry, thus reducing its effective equilibrium solubility in the iron lattice. Therefore, hydrogen attack should not occur in pressure-vessel steels used in many coal gasification processes.

Eliezer, D.↗
NASA NTRS1978

Upper critical field of copper molybdenum sulfide

The upper critical field of sintered and sputtered copper molybdenum sulfide Cu(x)Mo6S8 was measured and found to exceed the Werthamer, Helfand, and Hohenberg (1966) value for a type II superconductor characterized by dirty limit, weak isotropic electron phonon coupling, and no paramagnetic limiting. It is suggested that the enhancement results from anisotropy or clean limit or both. Other ternary molybdenum sulfides appear to show similar anomalies.

Alterovitz, S. A.↗
NASA NTRS1978

Superconducting properties of evaporated copper molybdenum sulfide films

Films of copper molybdenum sulfide were produced by coevaporation. Those that were superconducting contained only the ternary compound and free molybdenum. The range of copper content in the ternary compound was as large as that in polycrystalline material, that is, it includes either phase alone, or a mixture of the two phases of this material. This is in contrast with sputtered materials where copper concentration has been limited to a narrower range. The upper critical field and the critical current were measured as functions of external magnetic field, and found to be similar to those of sputtered copper molybdenum sulfide, when the comparison was made for samples having the same amount of copper.

Woollam, J. A.↗
NASA NTRS1978

Normal state properties of the ternary molybdenum sulfides

By making a large number of normal state and superconducting properties measurements, all on the same ternary molybdenum sulfide samples, we obtain values for Fermi surface and superconducting parameters. From these we conclude that sputtered ternary molybdenum sulfides are not completely in the dirty superconductor limit, and that they are d-band metals with a high electron carrier density.

Woollam, J. A.↗
NASA NTRS1979

Clues to the origin of sulfide minerals in CI chondrites

The dominant sulfide in CI carbonaceous chondrites is an Fe-deficient pyrrhotite containing about 1% Ni, Alais, Ivuna, and Orgueil also contain minor cubanite, CuFe2S3, and Alais minor pentlandite, (Fe,Ni)9S8. All pyrrhotites contain 39.4 + or - 0.1% S; Ni contents range from 0.7 to 1.3%. The phase diagrams reveal no temperature at which the observed pentlandite-pyrrhotite assemblage is at equilibrium. Similarly, the pyrrhotite composition alone are inconsistent with equilibrium formation from a gas of solar composition. In Xe from high-purity submilligram Orgueil pyrrhotite separates, the ratios Xe-129/Xe-132 are not significantly larger than those in trapped meteoritic Xe. The lack of positive evidence for extinct I-129 in pyrrhotite does not permit any inferences regarding cooling rates in the early solar nebula. It is concluded that sulfides in CI chondrites cannot be nebular condensates formed under equilibrium conditions. Argon isotopic abundances reveal the presence of significant spallation and trapped gas components in Orgueil pyrrhotite. The Orgueil exposure age is calculated to be at least about 10 m.y.

Kerridge, J. F.↗
NASA NTRS1981

Infrared absorption spectra of metal carbides, nitrides and sulfides

The infrared absorption spectra of 12 kinds of metal carbides, 11 kinds of nitrides, and 7 kinds of sulfides, a total of 30 materials, were measured and the application of the infrared spectra of these materials to analytical chemistry was discussed. The measurements were done in the frequency (wave length) range of (1400 to 400/cm (7 to 25 mu). The carbides Al4C3, B4C, the nitrides AlN, BN, Si3N4, WB, and the sulfides Al2S3, FeS2, MnS, NiS and PbS were noted to have specific absorptions in the measured region. The sensitivity of Boron nitride was especially good and could be detected at 2 to 3 micrograms in 300 mg of potassium bromide.

Kammori, O.↗
NASA NTRS1981

Infrared spectra of some sulfides and their analogs of binary composition in the long-wave region

The far infrared spectra (500-60/cm) of some simple sulfides and their analogs were studied. In all, 22 minerals with different structure types were investigated, out of which 14 are sulfides (galena, alabandite, pyrrhotite, sphalerite, wurtzite, cinnabar, realgar, orpiment, getchelite antimonite, molybdenite, pyrite, marcasite and heazlewoodite) 6 arsenides (niccolite, domeykite, arsenopyrite, lollingite, rammelsbergite and skutterudite), one telluride (tetradymite) and native arsenic. The main bands of infrared absorption spectra of the minerals are compared with the relative strength of the interatomic bonds and their interpretation is given.

Povarennykh, A. S.↗
NASA NTRS1981

Weathering of iron sulfides under Mars surface ambient conditions

The study of iron sulfide surface alternation reactions under Mars' surface ambient conditions begun during 1980 was extended through improved irradiation design and experimental protocols. A wider range of humidities and more intense irradiation were incorporated in the study. X-ray photoelectron spectra of irradiated chips suggest formation of FeSO4, FeCO3, and an iron oxide on the iron sulfide substrates studied.

Blackburn, T. R.↗
NASA NTRS1982

Sulfide saturation of basalt and andesite melts at high pressures and temperatures

When the sulfur content of an Fe-bearing magma exceeds the saturation limit for the bulk composition, an immiscible iron sulfide melt fraction separates. For an understanding of the geochemistry of sulfur-bearing magmatic systems, more information is needed regarding the solubility of metal sulfide in silicate melt at its source and the solubility changes as a function of changing intensive and extensive variables. In the present investigation, the sulfur saturation surface is determined for the pressure range from 12.5 to 30 kbar and the temperature range from 1300 to 1460 C for three silicate melt compositions representing a range of SiO2 and FeO compositions.

Wendlandt, R. F.↗
NASA NTRS1983

The application of remote sensing in geobotanical exploration for metal sulfides

A field study was conducted in Mineral, VA in 1980-82 to test the suitability of remote sensing techniques for geobotanical exploration. It was found that on trees growing over lead sulfide deposits, buds opened later and leaves were smaller than on trees growing on soils with background levels of lead and copper. This difference in leaf growth could be detected in remotely sensed data. In the spring, the smaller leaf size of metal-stressed trees resulted in a greater contribution from the soil and bark to the total reflectance imaged by the sensor. In the fall, the leaves of metal-stressed oaks sensed earlier than surrounding vegetation, which was also detected in remotely sensed data. It is concluded that vegetation growing on lead sulfide deposits has a shorter growing season than surrounding vegetation on unmineralized soil and that remotely sensed data collected at either end of the growing season can be used to locate geobotanical anomalies associated with these deposits.

Masuoka, E. J.↗
NASA NTRS1986

Partitioning of K, U, and Th between sulfide and silicate liquids - Implications for radioactive heating of planetary cores

Experimental partitioning studies are reported of K, U, and Th between silicate and FeFeS liquids designed to test the proposal that actinide partitioning into sulfide liquids is more important then K partitioning in the radioactive heating of planetary cores. For a basaltic liquid at 1450 C and 1.5 GPa, U partitioning into FeFeS liquids is five times greater than K partitioning. A typical value for the liquid partition coefficient for U from a granitic silicate liquid at one atmosphere at 1150 C and low fO2 is about 0.02; the coefficient for Th is similar. At low fO2 and higher temperature, experiments with basaltic liquids produce strong Ca and U partitioning into the sulfide liquid with U coefficient greater than one. The Th coefficient is less strongly affected.

Murrell, M. T.↗
NASA NTRS1987

Thermoelectric Properties of Lanthanum Sulfide

Report describes measurement of Seebeck coefficient, electrical resistivity, thermal conductivity, and Hall effect in gamma-phase lanthanum sulfide with composition of La3-x S4. Results of study, part of search for high-temperature thermoelectric energy-conversion materials, indicate this sulfide behaves like extrinsic semiconductor over temperature range of 300 to 1,400 K, with degenerate carrier concentration controlled by stoichiometric ratio of La to S.

Wood, C.↗
NASA NTRS1987

Weathering of sulfides on Mars

Pyrrhotite-pentlandite assemblages in mafic and ultramafic igneous rocks may have contributed significantly to the chemical weathering reactions that produce degradation products in the Martian regolith. By analogy and terrestrial processes, a model is proposed whereby supergene alteration of these primary Fe-Ni sulfides on Mars has generated secondary sulfides (e.g., pyrite) below the water table and produced acidic groundwater containing high concentrations of dissolved Fe, Ni, and sulfate ions. The low pH solutions also initiated weathering reactions of igneous feldspars and ferromagnesian silicates to form clay silicate and ferric oxyhydroxide phases. Near-surface oxidation and hydrolysis of ferric sulfato-and hydroxo-complex ions and sols formed gossan above the water table consisting of poorly crystalline hydrated ferric sulfates (e.g., jarosite), oxides (ferrihydrite, goethite), and silica (opal). Underlying groundwater, now permafrost contains hydroxo sulfato complexes of Fe, Al, Mg, Ni, which may be stabilized in frozen acidic solutions beneath the surface of Mars. Sublimation of permafrost may replenish colloidal ferric oxides, sulfates, and phyllosilicates during dust storms on Mars.

Burns, Roger G.↗
NASA NTRS1987

Mineralogical studies of sulfide samples and volatile concentrations of basalt glasses from the southern Juan de Fuca Ridge

Sulfide samples obtained from Alvin dives on the southern Juan de Fuca Ridge were examined, showing the presence of two previously undiscovered minerals, both formed at low temperatures. The first detection of lizardite, starkeyite, and anatase in such an environment is also reported. Sulfide geothermometry involving the Cu-Fe-S system shows a vent temperature of less than 328 C for one sample. Ice-melting temperatures on inclusions from this sample are about -2.8 C, and fluid inclusion studies on crystals near this sample show pressure-corrected homogenization temperatures of 268 and 285 C. Volatile concentrations from vesicle-free basalt glass from the vent field are found to be about 0.0013 wt pct CO2 and 0.16 wt pct H2O.

Brett, Robin↗