Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stratocumulus clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Stratocumulus simulation with a general circulation model

Stratus and stratocumulus cloud sheets which are among the most common cloud types over the world are discussed. They are characteristic of the undisturbed subtropical marine boundary layer over the eastern oceans, where cool water and large scale sinking motion suppress penetrative cumulus convection. They also occur over the Arctic Ocean, particularly in summer, and behind cold outbreaks over the western oceans in winter. Observational studies were conducted and further observations are planned.

Randall, D. A.↗

A simple dynamical model of a stratocumulus-topped boundary layer

The evolution of a planetary boundary layer topped by stratocumulus clouds is investigated theoretically. The derivation of a simulation model based on two-dimensional shallow moist Boussinesq convection is examined in detail, and the numerical results are presented in extensive tables and maps. The horizontal asymmetry of the circulation within a convective couplet is shown to increase with cloud depth and latent heating, so that the circulation becomes detached from that of the subcloud layer when the clouds fill one-third to one-half of the domain.

Laufersweiler, Mark J.↗

A stratocumulus thermodynamic analysis: July 5 case study

On July 5 (NCAR Electra flight 4, Mission 186-G) the Electra flew a single aircraft mission which consisted of cross and along-wind legs at 6 different altitudes between 10:43 to 16:00 PDT (17:43 to 23:00 GMT). The leg length was kept short (8 to 10 minutes) to permit maximum vertical resolution, and there were 8 soundings. Observer notes report a thin, solid stratocumulus cloud deck which gradually became more broken in the afternoon. Winds were from the north at 10 to 13/ms throughout the night. Sea surface temperature measurements and conservative variable analyses for several of the July 5 legs are presented. These results are preliminary to a study of the thermodynamic budget on July 5; they indicate that: the sea surface temperature dropped more than 1 K (from 17.3 to 15.9 C) over the course of the flight (18:01 and at 21:51 GMT); mixing lines for each of the horizontal subcloud legs show the effect of a strong north-south gradient in SST; and there is a clear demarcation over a transition of 5 to 10 km between air to the south and cooler, moister air to the north. The FSSP measurements indicate there are small clouds/scud 250 m below cloud base on the cold northern side of this transition. The transition is seen in the saturation point diagrams at 984, 959, and 946 mb. There is no corresponding change in the horizontal wind across the transition regions.

Austin, Philip↗

Thermodynamic structure of the stratocumulus-capped boundary layer on 5 July 1987

The National Center for Atmospheric Research (NCAR) Electra flew a single aircraft mission on July 5 in comparatively uniform stratocumulus cloud (80 to 100 percent cloud coverage). The flight pattern, a series of north-south doglegs centered at (32N, -122W), included 15 full or partial soundings to examine layer vertical structure between altitudes of 150 and 5000 m. The air below the inversion was well-mixed in moist static energy, total water, and ozone. The inversion base measured by the aircraft ranged from 920 to 938 hPa, while the thickness of the cloud layer varied between 30 and 10 hPa. Maximum cloud liquid water contents approached 0.3 g kg(-1) (as measured by the Johnson-Williams and King probes). Comparison of soundings made in the same location show a strengthening of the inversion and increasing shear at cloud top over the observation period (16:50 to 00:22 UT). Typical windspeeds below the inversion were approximately 10 m s(-1) decreasing to 6 m s(-1) 8 hPa above cloud top. A thermodynamic budget for this case is in preparation; it will provide a comparison and contrast with the more complicated July 7 case.

Austin, Philip H.↗

Direct measurements of tropospheric ozone using TOMS data

Fishman and Larsen have proposed a new algorithm, called 'tropospheric residual method,' which retrieves the climatological tropospheric ozone by using SAGE (Stratospheric Aerosol and Gas Experiment) and TOMS (Total Ozone Mapping Spectrometer) data. In this paper, we will examine the feasibility of detection for tropospheric ozone using only TOMS data. From a case study over the Atlantic Ocean off the coast of west Africa, it has been found that total ozone in the archived TOMS data has been overestimated over a region of marine-stratocumulus clouds.

Hudson, Robert D.↗

Results from ORACLES-2016: Observed Biomass Burning Aerosol Properties over the Southeast Atlantic Ocean and the Relationship to Meteorology

The Southeast Atlantic Ocean (SEA), with seasonal biomass burning (BB) smoke plumes overlying persistent stratocumulus cloud deck, offers an excellent natural laboratory to make the observations necessary to understand the complexities of aerosol-cloud-radiation interactions. The first field deployment of the NASA ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) campaign was conducted in September of 2016 out of Walvis Bay, Namibia. During this deployment, two NASA aircraft (a P-3 and an ER-2) were flown with a suite of aerosol, cloud, radiation, and meteorological instruments for remote-sensing and in-situ observations. In this talk, I will first present results from an intercomparison of the different instrument retrievals for the 2016 flights, with a specific focus on the measures of aerosol absorption. In ORACLES, data collected by eight different instrument teams are used to derive aerosol properties over this region by independent methods. We focus on the single scattering albedo (SSA), a measure of the relative absorption versus total extinction by aerosols, as the main comparable property between all methods. I will also discuss comparisons of the retrieved aerosol absorption parameters, as well as the agreement and the variability seen between different instruments, and spatially over the study region. Another important factor in understanding aerosol radiative effects is how the magnitude of these effects may be modified by meteorological conditions. I will next describe observations collected from the P-3 aircraft (from near-surface up to 6-7 kilometers) which show a strong correlation between the in-situ pollution indicators (carbon monoxide and aerosol properties) and atmospheric water vapor content, seen at all altitudes above the boundary layer. This condition is seen to persist over all flights, with minimal detrainment during advection from the continental source. In exploring the potential causal factors behind and implications of this relationship, we see indications that convective dynamics over the continent likely contribute to this elevated signal, but neither meteorological reanalysis nor trajectory analysis fully capture the magnitude and vertical structure of the observed elevated signal. Finally, I will discuss the radiative implications of the observed correlations, a topic of ongoing analysis in ORACLES: understanding the mechanisms which cause water vapor to covary with plume strength is important to quantifying the radiative effects (direct and semi-direct) of biomass burning aerosol in the region.

Pistone, Kristina↗

Exploring the Elevated Water Vapor Signal Associated With the Free Tropospheric Biomass Burning Plume Over the Southeast Atlantic Ocean

In southern Africa, widespread agricultural fires produce substantial biomass burning (BB) emissions over the region. The seasonal smoke plumes associated with these emissions are then advected westward over the persistent stratocumulus cloud deck in the southeast Atlantic (SEA) Ocean, resulting in aerosol effects which vary with time and location. Much work has focused on the effects of these aerosol plumes, but previous studies have also described an elevated free tropospheric water vapor signal over the SEA. Water vapor influences climate in its own right, and it is especially important to consider atmospheric water vapor when quantifying aerosol–cloud interactions and aerosol radiative effects. Here we present airborne observations made during the NASA ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) campaign over the SEA Ocean. In observations collected from multiple independent instruments on the NASA P-3 aircraft (from near-surface to 6–7 km), we observe a strongly linear correlation between pollution indicators (carbon monoxide (CO) and aerosol loading) and atmospheric water vapor content, seen at all altitudes above the boundary layer. The focus of the current study is on the especially strong correlation observed during the ORACLES-2016 deployment (out of Walvis Bay, Namibia), but a similar relationship is also observed in the August 2017 and October 2018 ORACLES deployments. Using reanalyses from the European Centre for Medium-Range Weather Forecasts (ECMWF) and Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), and specialized WRF-Chem simulations, we trace the plume–vapor relationship to an initial humid, smoky continental source region, where it mixes with clean, dry upper tropospheric air and then is subjected to conditions of strong westward advection, namely the southern African easterly jet (AEJ-S). Our analysis indicates that air masses likely left the continent with the same relationship between water vapor and carbon monoxide as was observed by aircraft. This linear relationship developed over the continent due to daytime convection within a deep continental boundary layer (up to ∼5–6 km) and mixing with higher-altitude air, which resulted in fairly consistent vertical gradients in CO and water vapor, decreasing with altitude and varying in time, but this water vapor does not originate as a product of the BB combustion itself. Due to a combination of conditions and mixing between the smoky, moist continental boundary layer and the dry and fairly clean upper-troposphere air above (∼6 km), the smoky, humid air is transported by strong zonal winds and then advected over the SEA (to the ORACLES flight region) following largely isentropic trajectories. Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT) back trajectories support this interpretation. This work thus gives insights into the conditions and processes which cause water vapor to covary with plume strength. Better understanding of this relationship, including how it varies spatially and temporally, is important to accurately quantify direct, semi-direct, and indirect aerosol effects over this region.

Kristina Pistone↗

Biomass Burning Smoke and Coincident Water Vapor Over the Southeast Atlantic Stratocumulus Region: Results from Observations and Models

In southern Africa, widespread agricultural fires produce substantial biomass burning (BB) emissions over the region. The seasonal smoke plumes associated with these emissions are then advected westward over the persistent stratocumulus cloud deck in the Southeast Atlantic (SEA) Ocean. We present airborne observations made during the NASA ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) campaign over the SEA. Using multiple airborne datasets, we observe a strongly linear correlation between biomass burning indicators (carbon monoxide (CO) and aerosol loading) and atmospheric water vapor content, seen at all altitudes above the boundary layer. This relationship was particularly strong in the 2016 observations, but was also present in the 2017 and 2018 deployments. Using ECMWF and MERRA-2 reanalyses and specialized WRF-Chem simulations, we trace the plume-vapor relationship to an initial humid, smoky continental source region, where it mixes with clean, dry upper-tropospheric air and then is subjected to conditions of strong westward advection, namely the South African Easterly Jet (AEJ-S). Our analysis indicates that airmasses likely left the continent with the same relationship between water vapor and carbon monoxide as was observed by aircraft. This linear relationship developed over the continent due to daytime convection within a deep continental boundary layer (up to ~5-6km) and mixing with higher-altitude air, which resulted in fairly consistent vertical gradients in CO and water vapor, decreasing with altitude and varying in time, but this water vapor does not originate as a product of the BB combustion itself. The smoky, humid mixed air is then subjected to strong zonal winds and advected over the SEA following largely isentropic trajectories. HYSPLIT back trajectories support this interpretation. With better understanding of this relationship, and its spatial and temporal variations, we are working towards accurately quantifying the radiative and dynamical effects of both aerosol and water vapor over this region.

Kristina Pistone↗

Vertical structure of biomass burning aerosol transported over the southeast Atlantic Ocean

Biomass burning in southwestern Africa produces smoke plumes that are transported over the Atlantic Ocean and overlie vast regions of stratocumulus clouds. This aerosol layer contributes to direct and indirect radiative forcing of the atmosphere in this region particularly during the months of August, September, and October. There was a multi-year international campaign to study this aerosol and its interactions with clouds. Here, we report on the evolution of aerosol distributions and properties as measured by the airborne high spectral resolution lidar (HSRL-2) during the ORACLES (Observations of Aerosols above Clouds and their intEractionS) campaign in September 2016. The NASA Langley HSRL-2 instrument was flown on the NASA ER-2 aircraft for several days in September 2016. Data were aggregated at two pairs of 2° × 2° grid boxes to examine the evolution of the vertical profile of aerosol properties during transport over the ocean. Results showed that the structure of the profile of aerosol extinction and microphysical properties is maintained over a 1 to 2 d timescale. In the 3–5 km altitude range, 95 % of the aerosol extinction was contributed by particles in the 0.05–0.50 µm radius size range with the aerosol in this size range having an average effective radius of 0.16 µm. This indicates that there is essentially no scavenging or dry deposition at these altitudes. Moreover, there is very little day-to-day variation in these properties, such that time sampling as happens in such campaigns may be representative of longer periods such as monthly means. Below 3 km, there is considerable mixing with larger aerosol, most likely continental source near land. Furthermore, these measurements indicated that there was often a distinct gap between the bottom of the aerosol layer and cloud tops at the selected locations as evidenced by a layer of several hundred meters that contained relatively low aerosol extinction values above the clouds.

lidar↗

A climatology of satellite-derived cloud properties over marine stratocumulus regions

Satellite data on cloud properties obtained during the First ISCCP Regional Experiment (FIRE) (where ISCCP stands for Interantional Satellite Cloud Climatology Project) were analyzed using a methodology used in the 1987 FIRE Intensive Field Observations (IFO) measurements, in order to link the small-scale IFO results to the ISCCP large-scale bulk cloud properties and to provide a detailed climatology for climate modeling. The preliminary results of the analysis delineated some of the features common to all four major subtropical marine stratus areas analyzed. The differences observed between the areas were greatest for the values of cloud optical depths.

Heck, Patrick W.↗

Interaction of the ABL with stratocumulus and cumulus cloud layers, appendix N

The role of the atmospheric boundary layer (ABL) over the oceans which in the general circulation of the atmosphere is to supply moisture to cumulus and stratus clouds is outlined. In extreme weather events, such as powerful storms and intense droughts, the primary role of the ABL is to supply or deny moisture to the weather system. Even for routine weather regimes, cloudiness and precipitation are key elements of any forecast. The premier problem for ABL parameterization is to formulate the physical coupling between the ABL turbulence and the clouds.

Randall, D. A.↗

Impacts of Solar-Absorbing Aerosol Layers on the Transition of Stratocumulus to Trade Cumulus Clouds

The effects of an initially overlying layer of solar-absorbing aerosol on the transition of stratocumulus to trade cumulus clouds are examined using large-eddy simulations. For lightly drizzling cloud the transition is generally hastened, resulting mainly from increased cloud droplet number concentration (Nc) induced by entrained aerosol. The increased Nc slows sedimentation of cloud droplets and shortens their relaxation time for diffusional growth, both of which accelerate entrainment of overlying air and thereby stratocumulus breakup. However, the decrease in albedo from cloud breakup is more than offset by redistributing cloud water over a greater number of droplets, such that the diurnal-average shortwave forcing at the top of the atmosphere is negative. The negative radiative forcing is enhanced by sizable longwave contributions, which result from the greater cloud breakup and a reduced boundary layer height associated with aerosol heating. A perturbation of moisture instead of aerosol aloft leads to a greater liquid water path and a more gradual transition. Adding absorbing aerosol to that atmosphere results in substantial reductions in liquid water path (LWP) and cloud cover that lead to positive short-wave and negative longwave forcings on average canceling each other. Only for heavily drizzling clouds is the breakup delayed, as inhibition of precipitation overcomes cloud water loss from enhanced entrainment. Considering these simulations as an imperfect proxy for biomass burning plumes influencing Namibian stratocumulus, we expect regional indirect plus semi-direct forcings to be substantially negative to negligible at the top of the atmosphere, with its magnitude sensitive to background and perturbation properties.

Zhou, Xiaoli↗

Aerosol measurements in the stratocumulus project

Cloud Condensation Nuclei (CCN) and Condensation Nuclei (CN) were measured from the National Center for Atmospheric Research (NCAR) Electra throughout the marine stratocumulus project. The total particle concentration was measured with a condensation nucleus counter. The CCN were measured with the Desert Research Institute (DRI) instantaneous CCN spectrometer. This instrument simultaneously measures the concentration of aerosol active at up to 100 different critical supersaturations (Sc). This is accomplished by exposing the sample to a fixed supersaturation field and using the size of the droplets produced in this cloud chamber to deduce the Sc of the nuclei upon which they have grown. Droplet size is associated with Sc through a calibration which is accomplished by passing soluble aerosols of known size and composition through the cloud chamber. This procedure results in a calibration curve of Sc vs. droplet size. This then allows the channel number to be directly associated with Sc. Thus, number concentration vs. Sc is obtained and this is a CCN spectrum. Since the instrument operates continuously, the measurements at all Sc's are available simultaneously. Samples are drawn directly from the ambient air and data is displayed in nearly real time. Samples were integrated over times of about 10 seconds so that substantial spatial resolution is available. Calibrations were performed once or twice a day and were found to be consistent. Preliminary results are shown.

Hudson, James G.↗

Cloud top liquid water from lidar observations of marine stratocumulus

Marine stratus clouds were simultaneously observed by nadir Nd:YAG lidar measurements and in situ cloud physics measurements. A procedure was applied to derive the two-dimensional vertical cross section of the liquid water from within the cloud top lidar observations. A comparison to direct in-cloud liquid water observations gave good results. The liquid water retrieval was limited to an effective optical depth of 1.5. The true cloud optical thickness was also obtained from the retrieval procedure to a corresponding limit of 3.8. The optical thickness of the observed marine stratus clouds was predominantly below 3.0.

Spinhirne, J. D.↗

Evidence for Limited Indirect Aerosol Forcing in Stratocumulus

Increases in cloud cover and condensed water contribute more than half of the indirect aerosol effect in an ensemble of general circulation model (GCM) simulations estimating the global radiative forcing of anthropogenic aerosols. We use detailed simulations of marine stratocumulus clouds and airborne observations of ship tracks to show that increases in cloud cover and condensed water in reality are far less than represented by the GCM ensemble. Our results offer an explanation for recent simplified inverse climate calculations indicating that indirect aerosol effects are greatly exaggerated in GCMs.

Ackerman, Andrew S.↗

Aerosol-Radiation-Cloud Interactions in the South-East Atlantic: Future Suborbital Activities to Address Knowledge Gaps in Satellite and Model Assessments

Southern Africa produces almost a third of the Earth's biomass burning (BB) aerosol particles. Particles lofted into the mid-troposphere are transported westward over the South-East (SE) Atlantic, home to one of the three permanent subtropical stratocumulus (Sc) cloud decks in the world. The SE Atlantic stratocumulus deck interacts with the dense layers of BB aerosols that initially overlay the cloud deck, but later subside and may mix into the clouds. These interactions include adjustments to aerosol-induced solar heating and microphysical effects, and their global representation in climate models remains one of the largest uncertainties in estimates of future climate. Hence, new observations over the SE Atlantic have significant implications for global climate change scenarios. Our understanding of aerosol-cloud interactions in the SE Atlantic is hindered both by the lack of knowledge on aerosol and cloud properties, as well as the lack of knowledge about detailed physical processes involved. Most notably, we are missing knowledge on the absorptive and cloud nucleating properties of aerosols, including their vertical distribution relative to clouds, on the locations and degree of aerosol mixing into clouds, on the processes that govern cloud property adjustments, and on the importance of aerosol effects on clouds relative to co-varying synoptic scale meteorology. We discuss the current knowledge of aerosol and cloud property distributions based on satellite observations and sparse suborbital sampling. Recent efforts to make full use of A-Train aerosol sensor synergies will be highlighted. We describe planned field campaigns in the region to address the existing knowledge gaps. Specifically, we describe the scientific objectives and implementation of the five synergistic, international research activities aimed at providing some of the key aerosol and cloud properties and a process-level understanding of aerosol-cloud interactions over the SE Atlantic: NASA's ORACLES, the UK Met Office's CLARIFY-2016, the DoE's LASIC, NSF's ONFIRE, and CNRS' AEROCLO-SA.

aerosols↗

Statistical Analyses of Satellite Cloud Object Data From CERES: Boundary-layer Cloud Objects During 1998 El Nino - Part 4

Three boundary-layer cloud object types, stratus, stratocumulus and cumulus, that occurred over the Pacific Ocean during January-August 1998, are identified from the CERES (Clouds and the Earth s Radiant Energy System) single scanner footprint (SSF) data from the TRMM (Tropical Rainfall Measuring Mission) satellite. This study emphasizes the differences and similarities in the characteristics of each cloud-object type between the tropical and subtropical regions and among different size categories and among small geographic areas. Both the frequencies of occurrence and statistical distributions of cloud physical properties are analyzed. In terms of frequencies of occurrence, stratocumulus clouds dominate the entire boundary layer cloud population in all regions and among all size categories. Stratus clouds are more prevalent in the subtropics and near the coastal regions, while cumulus clouds are relatively prevalent over open ocean and the equatorial regions, particularly, within the small size categories. The largest size category of stratus cloud objects occurs more frequently in the subtropics than in the tropics and has much larger average size than its cumulus and stratocumulus counterparts. Each of the three cloud object types exhibits small differences in statistical distributions of cloud optical depth, liquid water path, TOA albedo and perhaps cloud-top height, but large differences in those of cloud-top temperature and OLR between the tropics and subtropics. Differences in the sea surface temperature (SST) distributions between the tropics and subtropics influence some of the cloud macrophysical properties, but cloud microphysical properties and albedo for each cloud object type are likely determined by (local) boundary-layer dynamics and structures. Systematic variations of cloud optical depth, TOA albedo, cloud-top height, OLR and SST with cloud object sizes are pronounced for the stratocumulus and stratus types, which are related to systematic variations of the strength of inversion with cloud object sizes, produced by large-scale subsidence. The differences in cloud macrophysical properties over small regions are significantly larger than those of cloud microphysical properties and TOA albedo, suggesting a greater control of (local) large-scale dynamics and other factors on cloud object properties. When the three cloud object types are combined, the relative population among the three types is the most important factor for determining the cloud object properties in a Pacific transect where the transition of boundary-layer cloud types takes place.

Xu, Kuan-Man↗

Modeling marine boundary-layer clouds with a two-layer model: A one-dimensional simulation

A two-layer model of the marine boundary layer is described. The model is used to simulate both stratocumulus and shallow cumulus clouds in downstream simulations. Over cold sea surfaces, the model predicts a relatively uniform structure in the boundary layer with 90%-100% cloud fraction. Over warm sea surfaces, the model predicts a relatively strong decoupled and conditionally unstable structure with a cloud fraction between 30% and 60%. A strong large-scale divergence considerably limits the height of the boundary layer and decreases relative humidity in the upper part of the cloud layer; thus, a low cloud fraction results. The efffects of drizzle on the boundary-layer structure and cloud fraction are also studied with downstream simulations. It is found that drizzle dries and stabilizes the cloud layer and tends to decouple the cloud from the subcloud layer. Consequently, solid stratocumulus clouds may break up and the cloud fraction may decrease because of drizzle.

Wang, Shouping↗