Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standoff”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Accretion onto magnetized neutron stars - Structure and interchange instability of a model magnetosphere

A self-consistent model is analyzed for the spherical infall of weakly magnetized plasma into the magnetosphere of a slowly rotating, strongly magnetized neutron star. It is shown that spherical infall is probably a good approximation for X-ray sources which accrete from a stellar wind. The location of the standoff shock which halts the hypersonic infall is estimated along with the emission from the shocked layer. The location of the equilibrium magnetopause and the structure of the magnetic field within it are calculated; it is found that the magnetic poles are true cusps and that the entry of gas due to equilibrium flow across a cusp is almost certainly dominated by the interchange instability near the magnetic equator. The energy principle is applied to derive necessary conditions for the occurrence of this instability. The results indicate that the strong magnetic-pressure gradient stabilizes the gas unless moderately strong radiative cooling takes place and that the cooled plasma enters the magnetosphere as long filaments capable of moving between field lines. The rate at which the equilibrium magnetopause can 'absorb' mass and momentum is derived, the validity of the approximations employed is discussed, and the likely evolution of the sinking filaments is outlined to show that the spatial distribution of the plasma is determined mainly by the dynamics and thermodynamics of the filaments rather than the magnetic-field structure.

Arons, J.↗
NASA NTRS1977

Effect of gyro verticality error on lateral autoland tracking performance for an inertially smoothed control law

The results of a simulation study performed to determine the effects of gyro verticality error on lateral autoland tracking and landing performance are presented. A first order vertical gyro error model was used to generate the measurement of the roll attitude feedback signal normally supplied by an inertial navigation system. The lateral autoland law used was an inertially smoothed control design. The effect of initial angular gyro tilt errors (2 deg, 3 deg, 4 deg, and 5 deg), introduced prior to localizer capture, were investigated by use of a small perturbation aircraft simulation. These errors represent the deviations which could occur in the conventional attitude sensor as a result of the maneuver-induced spin-axis misalinement and drift. Results showed that for a 1.05 deg per minute erection rate and a 5 deg initial tilt error, ON COURSE autoland control logic was not satisfied. Failure to attain the ON COURSE mode precluded high control loop gains and localizer beam path integration and resulted in unacceptable beam standoff at touchdown.

Thibodeaux, J. J.↗
NASA NTRS1977

Numerical solution of the viscous hypersonic flow past blunted cones at angle of attack

Hypersonic viscous flow over spherically blunted cones of large half angle is computed at small angles of attack in the plane of symmetry of the flow field. Time-dependent viscous shock-layer equations in body-oriented coordinates are used to describe the flow field. The shock wave is treated as a discontinuity, across which the Rankine-Hugoniot relations are used to compute the flow conditions behind the shock. A time-marching second-order finite-difference method is used to solve the equations for a perfect gas. The local CFL (Courant-Friedrich-Lewy) time increment is used to advance the solution in time at each grid point. A fourth-order damping is used to damp the oscillations in the flow quantities. The numerical results of the present analysis for quantities such as shock standoff distance, surface-pressure distribution, and heating rates compare well with the existing theoretical and experimental results.

Kumar, A.↗
NASA NTRS1977

The Venus bow shock - Detached or attached

Examination of the locations of the bow shock encounters of Mariner 5 and 10 and Venera 4, 6, and 9 suggests that the bow shock of Venus is on the average detached from the ionosphere. However, the standoff distance of the nose of the shock is closer to the planet than the distance that one would obtain by simply scaling the solar wind Venus interaction under the assumption that Venus completely deflects the solar wind. This fact implies that there is a significant influx of solar wind plasma into the Venus ionosphere. If the absorption of the solar wind by Venus is great enough, the shock may become attached to the ionosphere. The Mariner 10 bow shock encounter may have occurred during such a period. A rough estimate of the average fraction of the solar wind incident on the cross section of the planet that is absorbed is 29%.

Russell, C. T.↗
NASA NTRS1978

An introduction to shuttle/LDEF retrieval operations: The R-bar approach option

Simulated orbiter direct approaches during long duration exposure facility (LDEF) retrieval operations reveal that the resultant orbiter jet plume fields can significantly disturb LDEF. An alternate approach technique which utilizes orbital mechanics forces in lieu of jets to brake the final orbiter/LDEF relative motion during the final approach, is described. Topics discussed include: rendezvous operations from the terminal phase initiation burn through braking at some standoff distance from LDEF, pilot and copilot activities, the cockpit instrumentation employed, and a convenient coordinate frame for studying the relative motion between two orbiting bodies. The basic equations of motion for operating on the LDEF radius vector are introduced. Practical considerations of implementing an R-bar approach, namely, orbiter/LDEF relative state uncertainties and orbiter control system limitations are explored. A possible R-bar approach strategy is developed and demonstrated.

Hall, W. M.↗
NASA NTRS1978

Mercury's helium exosphere after Mariner 10's third encounter

From a comparison of the Mariner 10 third encounter UV spectrometer data with intensities generated from a newly constructed model exosphere, a new value of 4.5 x 10 to the -4th power for the fraction of the solar wind He(++) flux to be intercepted and captured by Mercury's magnetosphere, if the observed He atmosphere is maintained by the solar wind, has been derived. If an internal source for He prevails, the corresponding upper bound for the global outgassing rate is estimated to be 4.5 x 10 to the 22nd power/s. These values differ from those given earlier because of the present use of a surface temperature distribution satisfying the heat equation over Mercury's entire surface which employs Mariner-10-determined mean surface thermal characteristics. The mean standoff distance of Mercury's magnetopause averaged over Mercury's orbit is also used. Agreement between the observed and calculated intensities is found to be good. Minor discrepancies on the nightside of the terminator are explicable in terms of differences between actual and computed temperatures and scale height structure changes.

Curtis, S. A.↗
NASA NTRS1977

Composite propellant combustion modeling studies

A review is presented of theoretical and experimental studies of composite propellant combustion. The theoretical investigations include a model of the combustion of a nonmetallized ammonium perchlorate (AP) propellant (noting time scales for vapor-phase combustion and the condensed phase) and response functions in pressure-coupled oscillations. The experimental studies are discussed with reference to scale-modeling apparatus, flame standoff distance versus velocity as a function of pressure, and results from T-burner firings of a nonmetallized AP/polysulfide propellant. Research applications including problems with nitramine propellants, the feasibility of stop-restart rockets with salt quench, and combustion problems in large boosters are outlined.

Ramohalli, K.↗
NASA NTRS1979

Inhibition of solar wind impingement on Mercury by planetary induction currents

Analytic methods are developed for taking into account finite planetary conductivity in modeling departures from equilibrium of a magnetospheric boundary caused by solar wind stagnation pressure variations. Using the lowest suggested value of the planetary dipole moment (2.4 x 10 to the 22nd G cu cm), it is estimated that a minimum pressure of about 38 P sub 0 (where P sub 0 is the external stagnation pressure in the steady state) is required to force the standoff distance down to the subsolar surface of Mercury if the pressure change persists for at least 1 day. This value is 4.3 times that which would be predicted if Mercury had no core, and it is larger than the maximum pressure predicted at Mercury's orbit (about 25 P sub 0) on the basis of hourly averaged solar wind statistics at 1 AU.

Hood, L. L.↗
NASA NTRS1979

Effects of probe shape change on flow phenomena during Jovian entry

The effects of probe shape change on the flow phenomena around a Jovian entry body is investigated. The initial body shapes considered are: 45-degree sphere cone, 35-degree hyperboloid, and 45-degree ellipsoid. The radiating shock-layer flow is assumed to be axisymmetric, inviscid, and in chemical and local thermodynamic equilibrium. The radiative transfer is calculated with an existing nongray radiation model that accounts for molecular band, atomic line, and continuum transitions. The results indicate that the shock-standoff distance, shock temperature and density, wall pressure distribution and radiative heating to the body are influenced significantly because of the probe shape change. The effect of shape change on radiative heating of the afterbody was considerably larger for the sphere cone and ellipsoid than for the hyperboloid. For the peak heating conditions, the net radiative heating to the body was found to be highest for the ellipsoid

Tiwari, S. N.↗
NASA NTRS1980

Mass reduction for advanced winged entry vehicles through integrated thermostructural-trajectory design

This study examines the impact of aerothermo-structure design integration on thermal protection system (TPS) mass for advanced winged entry vehicles. Four basic categories of TPS are considered: external insulation, metallic hot structures, metallic standoff, and hybrid systems. A variety of concepts that fit in these basic categories are examined. Entry trajectories tailored specifically to the characteristics of each TPS concept are generated. An aerodynamic heating program is used with the appropriately tailored trajectories to determine the centerline TPS requirements for each concept. Included in the investigation is the impact on the combined TPS-structure mass of structural materials which maintain their integrity to higher temperatures. Results indicate that significant mass reduction can be realized through appropriate aerothermo-structure design integration. An assessment is made of the relative merits of the TPS/structure/trajectory combinations considered in the study.

Wurster, K. E.↗
NASA NTRS1980

Flowfield calculations past an entry probe with ablated nose shape

The effects of ablated nose shapes on the flowfield solutions are studied, using a time-dependent finite-difference method developed by Kumar, et al. (1979). Solutions are obtained for the laminar flow of a radiating mixture of H-He in chemical equilibrium past a blunt axisymmetric body at zero angle of attack. The freestream conditions correspond to a point on a typical Jovian entry trajectory, and the initial probe shape is a 45-deg half-angle spherically blunted cone. It is found that as nose bluntness increases, the following occur: in the nose region, shock standoff distances and radiative heating rates increase substantially; surface pressure level increases, but convective heating rates decrease.

Kumar, A.↗
NASA NTRS1981

An assessment of the impact of transition on advanced winged entry vehicle thermal protection system mass

This study examines the impact of turbulent heating on thermal protection system (TPS) mass for advanced winged entry vehicles. Four basic systems are considered: insulative, metallic hot structures, metallic standoff, and hybrid systems. TPS sizings are performed using entry trajectories tailored specifically to the characteristics of each TPS concept under consideration. Comparisons are made between systems previously sized under the assumption of all laminar heating and those sized using a baseline estimate of transition and turbulent heating. The relative effect of different transition criteria on TPS mass requirements is also examined. Also investigated are entry trajectories tailored to alleviate turbulent heating. Results indicate the significant impact of turbulent heating on TPS mass and demonstrate the importance of both accurate transition criteria and entry trajectory tailoring.

Wurster, K. E.↗
NASA NTRS1982

Assessment of alternate thermal protection systems for the Space Shuttle Orbiter

Technical aspects of the alternate thermal protection system (TPS) study for the Shuttle Orbiter are reviewed, and a status report on alternate TPS technology developments is presented. Mission impact, life cycle costs and risks, and selected candidate concepts are identified. The best system would consist of mechanically attached metallic and carbon-carbon TPS concepts employing a titanium multiwall prepackaged concept at temperatures below 1000 F, a superalloy honeycomb prepackaged concept at temperatures between 1000-1800 F, and an advanced carbon-carbon multipost standoff concept above 1800 F. Alternative concepts offer significant improvements in durability and are mass competitive with current ceramic tile reusable surface insulation.

Kelly, H. N.↗
NASA NTRS1982

Efficient structures for geosynchronous spacecraft solar arrays, phase 4

Efficient structures for geosynchronous spacecraft solar arrays were investigated. The STACBEAM (stacking triangular articulated compact beam) concept was selected. The primary component, the solar array blanket, is stored in a folded configuration and is deployed by controlled linear extension. Blanket stiffness is attained by axially tensioning the blanket and by providing periodic lateral ribs and standoffs which attach the blanket to the beam at several places along its length. The STACBEAM deploys sequentially (one bay at a time) using a deployer of sufficient rigidity so that beam stiffness is not degraded during deployment. The beam does not rotate during deployment, thus making blanket beam attachment possible in the packaged condition. In addition to high bending stiffness, the STACBEAM possesses high torsional rigidity due to nonflexible diagonals. The concept is adaptable to various size and loading requirements by changing member diameter and baylength, thus affecting the ratio of packaged and deployed length.

Adams, L. R.↗
NASA NTRS1982

Optical studies of shock generated transient supersonic base flows

A shock tube employing interferometric and schlieren techniques is used to study transient base flow phenomena following shock wave passage over two plane bluff bodies: a hemicircular cylinder and a cylinder with the Galileo Jovian probe profile. An attempt is made to understand the physics of transition from transient to steady state flow, and to provide code verification for a study employing the Illiac IV computer. Transient base flow interactions include a series of shock diffraction, regular, and Mach reflections, coupled with boundary layer development, separation, and recompression. Vorticity generation and transport underlie these features. The quantitative verification of the computer code includes comparisons of transient pressure and density fields, near wake geometries, and bow shock standoff distances.

Liang, P.-Y.↗
NASA NTRS1984

The STEP/STACBEAM experiment technology development for very large solar array deployers

The Stacking Triangular Articulated Compact Beam (STACBEAM) is discussed with reference to structural testing experiments afforded by ground simulation and the Space Technology Experiments Platform (STEP). The STACBEAM lends itself to a deployment technique which offers a radical improvement in flexible blanket solar array technology. A system for deployment and support of a solar array blanket is described which consists of the blanket, its containment structure, the support structure and its deployer, the blanket stiffening battens, and the deployable boom standoffs. In operation, the blanket is pulled out and supported by the STACBEAM which packages next to the folded blanket. Since the STACBEAM does not rotate during extension, complete control of the blanket is maintained during extension. Deployment of this system occurs one bay at a time in a sequential manner. The deployer provides sufficient rigidity so that beam stiffness is not degraded during the deployment process.

Samuels, R.↗
NASA NTRS1983

Stagnation-point ablation of carbonaceous flat disks. II Experiment

Six flat-disk models made of carbon-carbon and carbon-phenolic materials were launched in an argon-filled track-range facility to test ablation characteristics in a radiation-dominated, massive-blowing environment. The shock standoff distances deduced from the shadowgraphs agree with theoretical predictions during the earlier portion of the flight, while the wall temperatures determined by the image-converter photographs agree with predictions during the later portion. The measured surface recessions exceed the calculated values by about 60 percent for carbon-phenolic and 30 percent for carbon-carbon. The discrepancies are attributed to spallation. The measured char thicknesses agree with theoretical predictions.

Park, C.↗
NASA NTRS1984

Analytical characterization of AOTV perigee aerothermodynamic regime

In preliminary design studies of AOTV (Aeroassisted Orbital Transfer Vehicle) configurations, it is desirable to have a simple analytical method for characterizing the aerothermodynamic regime at skip trajectory perigee as a function of vehicle L/D and m/CDA (ballistic coefficient). The present study derives an approximate perigee solution from the generalized equations of motion. For a prescribed entry velocity vector, the solution determines a Zeta function (proportional to density divided by m/CDA) at perigee as a parametric function of the exit velocity vector and (constant) L/D. The perigee Zeta function then determines perigee density (or altitude) as a parametric function of m/CDA. The solution allows the following classic aerothermodynamic parameters to be determined at perigee as parametric functions of m/CDA, L/D, and the exit velocity vector: Reynolds Number (viscous effects), Mach Number (compressibility effects), Knudsen Number (rarefaction effects), sphere and disk bow shock standoff distance, Damkohler Number (relaxation effects), viscous correlation parameter (viscid-inviscid interactions), and Stanton Number (convective heat transfer). Results of the analysis are given for low L/D and mid L/D AOTV configurations on return from geosynchronous and L5 orbits. It is concluded the method successfully provides preliminary estimates of the aerothermodynamic parameters through the use of simple algebraic equations and plots.

Desautel, D.↗