Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Stabilization of the crystal phase of inorganic/organic lead halide perovskites is critical for their high performance optoelectronic devices. However, due to the highly ionic nature of perovskite crystals, even phase stabilized polycrystalline perovskites can undergo undesirable phase transitions when exposed to a destabilizing environment. While various surface passivating agents have been developed to improve the device performance of perovskite solar cells, conventional deposition methods using a protic polar solvent, mainly isopropyl alcohol (IPA), results in a destabilization of the underlying perovskite layer and an undesirable degradation of device properties. We demonstrate the hidden role of IPA in surface treatments and develop a strategy in which the passivating agent is deposited without destabilizing the high quality perovskite underlayer. This strategy maximizes and stabilizes device performance by suppressing the formation of the perovskite δ-phase and amorphous phase during surface treatment, which is observed using conventional methods. Our strategy also effectively passivates surface and grain boundary defects, minimizing non-radiative recombination sites, and preventing carrier quenching at the perovskite interface. This results in an open-circuit-voltage loss of only ~340 mV, a champion device with a power conversion efficiency of 23.4% from a reverse current–voltage scan, a device with a record certified stabilized PCE of 22.6%, and enhanced operational stability. In addition, our perovskite solar cell exhibits an electroluminescence external quantum efficiency up to 8.9%.

14 SOLAR ENERGY↗
DOE OSTI2019

Observing the colloidal stability of iron oxide nanoparticles in situ

Colloidal processes such as nucleation, growth, ripening, and dissolution are fundamental to the synthesis and application of engineered nanoparticles, as well as numerous natural systems. In nanocolloids consisting of a dispersion of nanoparticles in solution, colloidal stability is in?uenced by factors including the particle surface facet and capping layer, and local temperature, chemistry, and acidity. In this paper, we investigate colloidal stability through the real-time manipulation of nanoparticles using in situ liquid cell Scanning Transmission Electron Microscopy (STEM). In a distribution of uniform iron oxide nanoparticles, we use the electron beam to precisely control the local chemistry of the solution and observe the critical role that surface chemistry plays in nanoparticle stability. By functionalizing the nanoparticle surfaces with charged amino acids and peptides, stability can be tuned to promote dissolution, growth, or agglomeration, either permanently or reversibly. STEM imaging is used to quantify kinetics of individual nanoparticles subject to local variations in chemistry. These measurements of dissolution and growth rates of iron oxide nanoparticles provide insights into nanoparticle stability relevant to synthesis and functionalization for biomedical applications.

Hufschmid, Ryan D.↗
DOE OSTI2017

Stability of Pt/Al 2 O 3 -Based Electrode Langasite SAW Sensors with Al 2 O 3 Capping Layer and Yttria-Stabilized Zirconia Sensing Layer

Surface acoustic wave (SAW) devices have been shown recently to be an appropriate technology for harsh environment sensor applications, such as those in the automotive, aerospace, power plant, and metallurgic industries. Usages include temperature, pressure, torque, strain, gas, liquid, biochemical, and mass sensors in structural health monitoring, industrial process monitoring, environment checking and control, and condition based maintenance. For harsh environment high-temperature applications, battery-free wireless operation associated with sensor robustness, small profile, and mass fabrication capability make SAW sensors a very attractive solution. For high-temperature (< 800°C) gas sensor applications, the stability of SAW sensor platform including protective and sensing film layers must be guaranteed over time and under temperature cycling conditions. This paper reports on the performance and stability of langasite SAW resonator (SAWR) sensor platform using PtAl2O3-based electrode, with atomic layer deposited (ALD) Al2O3 protective layer and yttria-stabilized zirconia (YSZ) gas sensing layer. The effect of 50nm thick Al2O3 or YSZ layers on SAWR sensor resonant frequency and temperature sensitivity responses were investigated. Temperature sensitivities of SAWR sensors with and without ALD Al2O3 protective layer have been compared with numerical predictions for a bare substrate. Measured temperature sensitivities of SAWR sensors with and without the YSZ sensing layers have been compared against each other. In addition, the stability of the SAWR sensor frequency responses have been monitored during multiple 110-hour temperature cycling (over 620 hours in total) from 300°C to 750°C. The measured frequency deviation at 750ºC over six of these 110-hour cycling tests was 0.05%. The results obtained confirm that the presence of the ALD Al2O3 protective layer or the YSZ sensing layer do not compromise the stability of high-temperature harsh environment SAWR sensors, validating their use for the aforementioned applications.

42 ENGINEERING↗
DOE OSTI2017

Stability of rare‐earth‐doped spherical yttria‐stabilized zirconia synthesized by ultrasonic spray pyrolysis

Abstract Phase stability is one of the crucial requirements for any material that can be used at elevated temperature applications such as thermal barrier coating ( TBC ). The most traditional TBC material, partially stabilized zirconia, limits the operating temperature due to its phase transformation. Conversely, the low thermal conductivity of fully stabilized zirconia ( YSZ ) may enable effective reduction in the surface temperature on the coated component, while avoiding deleterious phase transitions, although still being subjected to sintering and grain growth. It has been reported that addition of rare‐earths as dopants to YSZ can significantly increase resistance to grain growth at high temperature. Keeping this under consideration, this work investigates the role of rare‐earths (lanthanum and gadolinium) in increasing thermal stability of YSZ microspheres, the building blocks for high‐temperature photonics for reflective TBC . The spheres were produced by ultrasonic spray pyrolysis, and the doping led to significant improvement of stability by significant inhibition of grain growth. While the individual dopants showed significant growth and sintering inhibition up to 900°C, co‐doping with 4% (in mol) of each (Gd and La) led to coarsening resistance up to 1000°C for 3 hours, when particles retained reasonable spherical features with nanometric crystallite sizes.

Nafsin, Nazia↗
NASA NTRS1971

The relationship between phase stability and frequency stability and a method of converting between them

A method is presented for obtaining the value of the phase stability from time domain frequency stability measurements. Definition of frequency and phase stability are presented. The various types of noise sources in an oscillator and how their location in the oscillator circuitry determines the resultant phase and frequency noise spectrum are described. With this knowledge, the type of noise spectrum from time domain frequency stability measurements is determined. Using certain conversions, the total phase noise spectrum is obtained, which is integrated to obtain the phase stability. Examples of the conversion process are also presented.

Bohn, P. P.↗
NASA NTRS1993

Stability of outer planetary orbits around binary stars - A comparison of Hill's and Laplace's stability criteria

A comparison is made between the stability criteria of Hill and that of Laplace to determine the stability of outer planetary orbits encircling binary stars. The restricted, analytically determined results of Hill's method by Szebehely and coworkers and the general, numerically integrated results of Laplace's method by Graziani and Black (1981) are compared for varying values of the mass parameter mu. For mu = 0 to 0.15, the closest orbit (lower limit of radius) an outer planet in a binary system can have and still remain stable is determined by Hill's stability criterion. For mu greater than 0.15, the critical radius is determined by Laplace's stability criterion. It appears that the Graziani-Black stability criterion describes the critical orbit within a few percent for all values of mu.

Kubala, A.↗
NASA NTRS1958

Methods for obtaining desired helicopter stability characteristics and procedures for stability predictions

Part I of this report presents a brief review of methods available to the helicopter designer for obtaining desired stability characteristics by modifications to the airframe design. The discussion is based on modifications made during the establishment of flying-qualities criteria and includes sample results of theoretical studies of additional methods. The conclusion is reached that it is now feasible to utilize combinations of methods whereby stability-parameter values are realized which in turn provide the desired stability characteristics. Part II reviews some of the methods of predicting rotor stability derivatives. The procedures by which these rotor derivatives are employed to estimate helicopter stability characteristics have been summarized.

Gustafson, F B↗
DOE OSTI2016

Comparison of the Numerical Stability between CMFD and GCMR with Stabilization Techniques

The Coarse Mesh Finite Difference (CMFD) method and the Generalized Coarse Mesh Rebalance (GCMR) method have been applied to many reactor physics codes and these methods contribute for improvement of calculation speed. On the other hand, the numerical instability of these methods have been a crucial issue. In order to overcome this issue, some stabilization techniques such as damping factor and correction techniques of diffusion coefficient have been developed. The systematic comparison of the calculation stability and efficiency between GCMR and CMFD with various stabilization techniques has not been reported and these results are important for the improvement of nuclear reactor analysis. The present summary focuses on this point. Namely, calculation stability and efficiency of the CMFD and the GCMR are compared with investigation of the effect of stabilization techniques on these methods. We applied these methods and techniques to 2D geometries with and without voided regions. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Long-Life, Ultrahigh-Nickel Cathodes with Excellent Air Storage Stability for High-Energy Density Lithium-Based Batteries

With increased energy density and cost advantage, ultrahigh-nickel layered oxides (LiNi x M 1-x O 2 , x = 0.9 - 1.0) are becoming front-runner as cathodes for next-generation lithium-based batteries, yet their commercialization is blocked both by severe capacity fade and exponentially aggravated air degradation. Thus, it is imperative to find effective solutions to address these issues simultaneously. Here, a significant enhancement in both the cycling and air storage stability of the ultrahigh-Ni cathode LiNi 0.94 Co 0.06 O 2 is achieved via a distinctive phosphoric acid treatment strategy. The modified cathode displays remarkably improved capacity retention (from 36 % to 80 % after 1,000 cycles) and rate capability (from 0 to 105 mA h g -1 at 30C rate) in pouch cells. Impressively, the modified cathode, after air storage for 450 days, maintains the morphology and 92% of the initial capacity of the fresh sample with excellent cyclability. Comprehensive interphase and structural analyses reveal that the enhanced electrochemical performance is due to a highly stabilized electrode/electrolyte interphase that suppresses electrode corrosion and lattice reconstruction. The excellent air stability results from an adsorption-buffering effect enabled by phosphoric acid to air attack. Finally, the study demonstrates an engineering pathway to improve the cycling and air stability, facilitating the practical viability of high-capacity, affordable, ultrahigh-Ni cathodes in lithium-based batteries.

25 ENERGY STORAGE↗
DOE OSTI2014

A Crank–Nicolson Leapfrog stabilization: Unconditional stability and two applications

We propose and analyze a linear stabilization of the Crank-Nicolson Leapfrog (CNLF) method that removes all time step/CFL conditions for stability and controls the unstable mode. It also increases the SPD part of the linear system to be solved at each time step while increasing solution accuracy. We give a proof of unconditional stability of the method as well as a proof of unconditional, asymptotic stability of both the stable and unstable modes. As a result, we illustrate two applications of the method: uncoupling groundwater-surface water flows and Stokes flow plus a Coriolis term.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Experimental and numerical investigation of flame stabilization and pollutant formation in matrix stabilized ammonia-hydrogen combustion

Ammonia (NH 3 ) is a carbon-free fuel that offers an attractive alternative for reducing greenhouse gas emissions. However, the slow flame speed, low heating value, and emissions of nitrogen-containing pollutants present significant issues for practical combustion applications. To address these issues, we investigate the use of matrix stabilized combustion. In this type of burner, combustion is performed within an inert porous ceramic foam, heat is recirculated by solid conduction and radiation, which enhances flame speed and combustion stabilization, thereby permitting combustion over a wide range of equivalence ratio conditions. We present a new porous media burner (PMB) capable of stabilizing NH 3 /air flames at ambient conditions. An extensive experimental characterization of the stability of this burner is conducted with up to 30% by volume of hydrogen (H 2 ) in the fuel stream. A 15:1 turndown ratio is demonstrated, with a high thermal power density of 62 MW m -3 . Concentrations of NO, unburnt NH 3 , and H 2 in the exhaust stream are measured. Two regimes are identified for low NO operation: rich and very lean. For rich conditions, NO emissions decrease with increasing equivalence ratio and decreasing H 2 blending. Unburnt NH 3 emissions follow opposite trends. These measurements are complemented by simulations in which the burner is represented by a coupled solid-gas reactor network. In conclusion, this model captures the burner’s pollutant emissions to good accuracy and is used to analyze the mechanisms of pollutant formation.

42 ENGINEERING↗
DOE OSTI2022

Stabilization of glucose-6-phosphate dehydrogenase oligomers enhances catalytic activity and stability of clinical variants

Glucose-6-phosphate dehydrogenase (G6PD) deficiency is a genetic trait that can cause hemolytic anemia. To date, over 150 nonsynonymous mutations have been identified in G6PD, with pathogenic mutations clustering near the dimer and/or tetramer interface and the allosteric NADP + -binding site. Recently, our lab identified a small molecule that activates G6PD variants by stabilizing the allosteric NADP + and dimer complex, suggesting therapeutics that target these regions may improve structural defects. Here, we elucidated the connection between allosteric NADP + binding, oligomerization, and pathogenicity to determine whether oligomer stabilization can be used as a therapeutic strategy for G6PD deficiency (G6PD def ). We first solved the crystal structure for G6PD K403Q , a mutant that mimics the physiological acetylation of wild-type G6PD in erythrocytes and demonstrated that loss of allosteric NADP + binding induces conformational changes in the dimer. These structural changes prevent tetramerization, are unique to Class I variants (the most severe form of G6PD def ), and cause the deactivation and destabilization of G6PD. We also introduced nonnative cysteines at the oligomer interfaces and found that the tetramer complex is more catalytically active and stable than the dimer. Furthermore, stabilizing the dimer and tetramer improved protein stability in clinical variants, regardless of clinical classification, with tetramerization also improving the activity of G6PD K403Q and Class I variants. These findings were validated using enzyme activity and thermostability assays, analytical size-exclusion chromatography (SEC), and SEC coupled with small-angle X-ray scattering (SEC-SAXS). Taken together, our findings suggest a potential therapeutic strategy for G6PD def and provide a foundation for future drug discovery efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Thermal stability of helium bubble superlattice in Mo under TEM in-situ heating

Although the temperature window of He ion irradiation for gas bubble superlattice (GBS) formation was found to be in the range of approximately 0.15 – 0.35 melting point, the thermal stability of He GBS has not been fully investigated. This work reports the experiment using an in-situ heating holder in a transmission electron microscope (TEM). A 3.0 mm TEM disc sample of Mo (99.5% pure) was jet-polished and then irradiated with 40 keV He ions at 300°C to a fluence of 1.0E+17 ions/cm 2 , corresponding to a peak He concentration of approximately 10 at.%, in order to introduce He GBS. In-situ heating was conducted with a ramp rate of ~ 25°C/min, hold time of ~ 30 min, and temperature step of ~ 100°C up to 850°C (0.39T m ). The result shows exceptional thermal stability of He GBS in Mo with no noticeable change on GBS lattice constant and ordering. The implication of this unique and stable ordered microstructure on mechanistic understanding of GBS and its advanced application will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Lipid cross-linking of nanolipoprotein particles substantially enhances serum stability and cellular uptake [Lipid crosslinking enhances the stability of nanolipoprotein particles in serum by multiple orders of magnitude]

Nanolipoprotein particles (NLPs) consist of a discoidal phospholipid lipid bilayer confined by an apolipoprotein belt. NLPs are a promising platform for a variety of biomedical applications due to their biocompatibility, size, definable composition, and amphipathic characteristics. However, poor serum stability hampers the use of NLPs for in vivo applications such as drug formulation. In this study, NLP stability was enhanced upon the incorporation and subsequent UV-mediated intermolecular cross-linking of photoactive DiynePC phospholipids in the lipid bilayer, forming cross-linked nanoparticles (X-NLPs). Both the concentration of DiynePC in the bilayer and UV exposure time significantly affected the resulting X-NLP stability in 100% serum, as assessed by size exclusion chromatography (SEC) of fluorescently labeled particles. Cross-linking did not significantly impact the size of X-NLPs as determined by dynamic light scattering and SEC. X-NLPs had essentially no degradation over 48 h in 100% serum, which is a drastic improvement compared to non-cross-linked NLPs (50% degradation by ~10 min). X-NLPs had greater uptake into the human ATCC 5637 bladder cancer cell line compared to non-cross-linked particles, indicating their potential utility for targeted drug delivery. X-NLPs also exhibited enhanced stability following intravenous administration in mice. Lastly, these results collectively support the potential utility of X-NLPs for a variety of in vivo applications.

59 BASIC BIOLOGICAL SCIENCES↗