Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Intercomparison of the SNPP and NOAA-20 VIIRS DNB High-Gain Stage Using Observations of Bright Stars

The Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi-NPP (SNPP) and NOAA-20 (N20) spacecrafts is a multi-spectral Earth-observing instrument with bands covering wavelengths from visible to long-wave infrared. Among these bands is a panchromatic day/night band (DNB) with a broad spectral response ranging from 500􀀀900 nm, and a high dynamic range spanning over 7 orders of magnitude, allowing for observations to take place during both daytime and nighttime. The DNB operates at 3 gain levels, with low-, mid- , and high-gain stages. The high-gain stage (HGS) is capable of detecting dim city lights during Earth-view observations at night as well as bright stars through the instrument space-view port. Since SNPP and N20 are at opposite points of the same orbit, each VIIRS instrument is able to observe the same stars with the DNB in successive orbits. This will allow us to make a direct comparison of the relative calibration of each instrument using stars over a range of spectral classes. In this work, we develop methodology for accurately identifying target stars in order to make proper comparisons between the DNB HGS of each instrument. We then take observations from multiple stars in order to compute the ratio in the measured irradiance for each instrument as a function of spectral class. For K-type stars, which have the least spectral change over the DNB wavelength range, we measure a calibration bias between the SNPP and N20 DNB HGS of approximately 4%, which is stable over the duration of the N20 mission.

Truman Wilson↗
NASA NTRS2018

An Accurate Method for Correcting Spectral Convolution Errors in Intercalibration of Broadband and Hyperspectral Sensors

The intercalibration between a broadband and a hyperspectral satellite Earth observation system requires the convolution of the hyperspectral data with the spectral response functions (SRFs) of the corresponding broadband channels. There are two potential issues associated with the convolution procedure. First, the finite resolution of a hyperspectral spectrum, that is, the deviation from the highly accurate line-by-line monochromatic radiances, will contribute to convolution errors. The magnitude of the errors depends on the spectral resolution and the SRF shape of the hyperspectral instrument. This type of the convolution error has not been well recognized, and there is a lack of corresponding discussion in most published papers. Although it is small as compared with the instrument accuracy of existing hyperspectral sounders, the error is deemed to be signicant when it is compared with the stringent calibration requirement imposed by future climate missions like the Climate Absolute Radiance and Refractivity Observatory (CLARREO). Second, some broadband channels are insufficiently covered by the hyperspectral data, causing spectral gaps that lead to convolution errors. Although several methods have been developed to fill the spectral gaps and hence compensate for the second type of convolution error, the correction accuracy may still need improvement especially when a large spectral gap needs to be lled. This paper presents a methodology to accurately quantify and compensate for both types of convolution errors. This methodology utilizes the available hyperspectral information to correct the scene-dependent convolution errors due to either the limited spectral resolution or spectral gaps. We use simulations to characterize the intercalibration errors between the Moderate resolution Imaging Spectroradiometer (MODIS) and current operational infrared sounders. We demonstrate that convolution errors can be effectively removed to meet the highly accurate intersatellite calibration requirement proposed by the Climate Absolute Radiance and Refractivity Observatory. Our methodology is also validated using real satellite data for the intercalibration between Aqua MODIS and Aqua Atmospheric Infrared Sounders (AIRS). Our study demonstrates that the accurate characterization and correction for the convolution errors greatly reduces the scene-dependent and spectrally dependent errors, being critical to the consistency check between Infrared Atmospheric Sounding Interferometer (IASI) and AIRS using the double-difference method. The convolution correction also facilitates the evaluation for other intercalibration errors (e.g., the drift of MODIS SRFs). Our derived SRF shift values from MODIS-AIRS (after convolution error corrections) and from MODIS-IASI intercalibration are consistent with each other. We further extend the methodology to study the calibration of a broadband channel which is either completely or largely uncovered bya hyperspectral measurement.The large spectral gap-filling methodology is validated by demonstrating the accurate prediction of the MODIS radiance of band 29 using the Cross-track Infrared Sounder spectra, with the real IASI spectral data being used as the reference.

Correction Method↗
NASA NTRS1973

A radiation model for calculating atmospheric corrections to remotely sensed infrared measurements, version 2

A numerical model is developed which calculates the atmospheric corrections to infrared radiometric measurements due to absorption and emission by water vapor, carbon dioxide, and ozone. The corrections due to aerosols are not accounted for. The transmissions functions for water vapor, carbon dioxide, and water are given. The model requires as input the vertical distribution of temperature and water vapor as determined by a standard radiosonde. The vertical distribution of carbon dioxide is assumed to be constant. The vertical distribution of ozone is an average of observed values. The model also requires as input the spectral response function of the radiometer and the nadir angle at which the measurements were made. A listing of the FORTRAN program is given with details for its use and examples of input and output listings. Calculations for four model atmospheres are presented.

Boudreau, R. D.↗
NASA NTRS1984

Directional reflectance factor distributions of a cotton row crop

The directional reflectance factor distribution spanning the entire exitance hemisphere was measured for a cotton row crop (Gossypium barbadense L.) with 39 percent ground cover. Spectral directional radiances were taken in NOAA satellite 7 AVHRR bands 1 and 2 using a three-band radiometer with restricted 12 deg full angle field of view at half peak power points. Polar co-ordinate system plots of directional reflectance factor distributions and three-dimensional computer graphic plots of scattered flux were used to study the dynamics of the directional reflectance factor distribution as a function of spectral band, geometric structure of the scene, solar zenith and azimuth angles, and optical properties of the leaves and soil. The factor distribution of the incomplete row crops was highly polymodal relative to that for complete vegetation canopies. Besides the enhanced reflectance for the antisolar point, a reflectance minimum was observed towards the forwardscatter direction in the principle plane of the sun. Knowledge of the mechanics of the observed dynamics of the data may be used to provide rigorous validation for two- or three-dimensional radiative transfer models, and is important in interpreting aircraft and satellite data where the solar angle varies widely.

Kimes, D. S.↗
NASA NTRS2017

Radiometric and spectral stray light correction for the Portable Remote Imaging Spectrometer (PRISM) coastal ocean sensor

The airborne Portable Remote Imaging Spectrometer (PRISM) instrument is based on a fast (F/1.8) Dyson spectrometer operating at 350-1050 nm and a two-mirror telescope combined with a Teledyne HyViSI 6604A detector array. Raw PRISM data contain electronic and optical artifacts that must be removed prior to radiometric calibration. We provide an overview of the process transforming raw digital numbers to calibrated radiance values. Electronic panel artifacts are first corrected using empirical relationships developed from laboratory data. The instrument spectral response functions (SRF) are reconstructed using a measurement-based optimization technique. Removal of SRF effects from the data improves retrieval of true spectra, particularly in the typically low-signal near-ultraviolet and near-infrared regions. As a final step, radiometric calibration is performed using corrected measurements of an object of known radiance. Implementation of the complete calibration procedure maximizes data quality in preparation for subsequent processing steps, such as atmospheric removal and spectral signature classification.

Thompson, David R.↗
NASA NTRS1994

X-ray emission from near-main-sequence B stars

Results of a Roengten Satellite (ROSAT) X-ray survey of 12 nearby near-main-sequence B stars are presented. Objects with very low interstellar hydrogen column density were chosen to study the soft X-ray emission properties of the stars. All of the stars were detected at the 3 sigma level. Spectral fits to seven of the stars are presented, and temperatures and source emission measures are derived. The spectra and characterized by emission from gas at a temperature of about 2 x 10(exp 6) K, which is lower than that typically observed for O stars. The ratio L(sub x)/L(sub Bol) decreases sharply with spectral types later than B1, reaching values of about 10(exp -9) at B3 V; much less than the value of 10(exp -7) that holds for O stars and early-B stars. The survey includes four beta Cephei stars and two Be stars. Our observations are consistent with the finding that beta Cephei variables have softer spectra than other stars of the same spectral type. The X-ray emission measures for the stars are compared with upper and lower limits derived using mass loss rates and terminal velocities from line-driven wind theory. It is concluded that if shocks embedded in the winds are the source of the X-ray emission then a significant fraction of the winds in B stars must be hot. One to a few shocks can account for the observed emission measures. As a function of spectral type, there appears to be a transition in X-ray emission properties at about B1 to B1.5, with later type stars having a smaller L(sub x)/L(sub Bol) ratio. Coronal and shock models are discussed in regards to the BO V star tau Sco which has an anomalously high source temperature.

Cassinelli, J. P.↗
NASA NTRS1980

Analytical design of multispectral sensors

An optimal design based on the criterion of minimum mean square representation error using the Karhunen-Loeve expansion was developed to represent the spectral response functions from a stratum based upon a stochastic process scene model. From the overall pattern recognition system perspective, the effect of the representation accuracy on a typical performance criterion (the probability of correct classification) is investigated. The optimum sensor design provides a standard against which practical (suboptimum) operational sensors can be compared. An example design is provided and its performance is illustrated. Although developed primarily for the purpose of sensor design, the procedure has potential for making important contributions to scene understanding. Spectral channels which have narrow bandwidths relative to current sensor systems may be necessary to provide adequate spectral representation and improved classification performance.

Wiersma, D. J.↗
NASA NTRS1992

Application of neural networks to prediction of advanced composite structures mechanical response and behavior

Two types of neural networks were used to evaluate acousto-ultrasonic (AU) data for material characterization and mechanical reponse prediction. The neural networks included a simple feedforward network (backpropagation) and a radial basis functions network. Comparisons of results in terms of accuracy and training time are given. Acousto-ultrasonic (AU) measurements were performed on a series of tensile specimens composed of eight laminated layers of continuous, SiC fiber reinforced Ti-15-3 matrix. The frequency spectrum was dominated by frequencies of longitudinal wave resonance through the thickness of the specimen at the sending transducer. The magnitude of the frequency spectrum of the AU signal was used for calculating a stress-wave factor based on integrating the spectral distribution function and used for comparison with neural networks results.

Cios, K. J.↗
NASA NTRS1991

Equilibrium wave spectrum and sea state bias in satellite altimetry

For a well-developed sea at equilibrium with a constant wind, the energy-containing range of the wavenumber spectrum for wind-generated gravity waves is approximated by a generalized power law involving the angular spread function and mu, interpreted as a fractal codimension of a small surface patch. Dependence of mu on the wave age is estimated, and the 'Phillips constant', beta, along with the low-wavenumber boundary, k0, of the inertial subrange are analyzed on the basis of the wave action and energy conservation principles. The resulting expressions are employed to evaluate various non-Gaussian statistics of a weakly nonlinear sea surface, which determine the sea state bias in satellite altimetry. The locally accelerated decay of the spectral density function in a high-wavenumber dissipation subrange is pointed out as an important factor of wave dynamics and the geometrical optics treatment of the sea state bias. The analysis is carried out in the approximation of a unidirectional wave field and confined to the case of a well-developed sea.

Glazman, Roman E.↗
NASA NTRSDate not supplied

Fusion of Hyperspectral Sounder Products Via Spectral Fingerprinting Methodology

Satellite based measurements of top-of-atmosphere (TOA) spectral radiances in the infrared (IR) region have been in existence for almost two decades and are expected to be continued in the following decades. The data from multiple hyper-spectral IR sounders can therefore be combined to build a long-term data record to further global scale climate trend research. Challenges associated with the fusion of data from different sensors come from the stability and consistency requirement on the climate record. The direct radiance observations from different sounders need to be homogenized by reconciling the differences in calibration, spectral response function (SRF), and spatial-temporal sampling. When geophysical variables derived from radiances measured by different sounders are combined to form long-term climate records, the impacts of any inconsistencies between overlapping measurements on the retrieval must be carefully assessed in order to estimate the uncertainty of the corresponding climate anomalies/trends derived. This paper presents a novel climate fingerprinting methodology and establishes a rigorously-defined inverse relationship that allows us to efficiently evaluate the change in essential climate variables from the change in spectral radiances measured in prescribed spatial and temporal averaging scales. The inverse spectral fingerprinting relationship is constructed based on a unified spectral kernel scheme, providing a direct means for quantifying the potential discontinuity in the derived climate anomalies due to inconsistencies between overlapping measurements. We show in this paper a sample application of using the spectral fingerprinting scheme to derive long-term, global-scale surface temperatures from the Climate Hyperspectral Infrared Radiance Product (CHIRP) and quantify the inter-satellite biases.

Wan Wu↗
NASA NTRS2018

Enhancements to the Open Access Spectral Band Adjustment Factor Online Calculation Tool for Visible Channels

With close to 40 years of satellite observations, from which, cloud, land-use, and aerosol parameters can be measured, inter-consistent calibrations are needed to normalize retrievals across satellite records. Various visible-sensor inter-calibration techniques have been developed that utilize radiometrically stable Earth targets, e.g., deep convective clouds and desert/polar ice pseudo-invariant calibration sites. Other equally effective, direct techniques for intercalibration between satellite imagers are simultaneous nadir overpass comparisons and ray-matched radiance pairs. Combining independent calibration results from such varied techniques yields robust calibration coefficients, and is a form of self-validation. One potential source of significant error when cross-calibrating satellite sensors, however, are the often small but substantial spectral discrepancies between comparable bands, which must be accounted for. As such, visible calibration methods rely on a Spectral Band Adjustment Factor (SBAF) to account for the spectral-response function- induced radiance differences between analogous imagers. The SBAF is unique to each calibration method as it is a function of the Earth-reflected spectra. In recent years, NASA Langley pioneered the use of SCIAMACHY-, GOME-2-, and Hyperion-retrieved Earth spectra to compute SBAFs. By carefully selecting hyperspectral footprints that best represent the conditions inherent to an inter-calibration technique, the uncertainty in the SBAF is greatly reduced. NASA Langley initially provided the Global Space-based Inter-calibration System processing and research centers with online SBAF tools, with which users select conditions to best match their calibration criteria. This article highlights expanded SBAF tool capabilities for visible wavelengths, with emphasis on the use of the spectral range filtering for the purpose of separating scene conditions for the channel that the SBAF is needed based on the reflectance values of other bands. In other words, spectral filtering will enable better scene-type selection for bands where scene determination is difficult without information from other channels, which should prove valuable to users in the calibration community.

Scarino, Benjamin↗
NASA NTRSDate not supplied

Joint Retrieval of Surface BRDF from Geostationary and Polar-Orbiting Satellite Sensors

The latest geostationary sensors like GOES 16/17 ABI and Himawari 8/9 AHI provide high frequent observations of the Earth surface with continuously changing solar illumination geometries, which allow us to retrieve the surface Bidirectional Reflectance Distribution Function (BRDF) with dedicated atmospheric correction algorithms like MAIAC (Multi-Angle Implementation of Atmospheric Correction). However, because the viewing geometry of a specific location from the geostationary satellites are fixed, the angular sampling of surface BRDF by GEO (Geostationary Earth Orbit) sensors is far from comprehensive. This study tries to address this issue by exploring a GEO-LEO (Low-Earth-Orbit) synergy, in particular, jointly retrieving surface BRDF parameters with concurrent ABI/AHI and VIIRS top-of-atmosphere (TOA) reflectance for the near-infrared (NIR) band. The NIR band is chosen because the ABI, AHI, and VIIRS instruments have very similar spectral response functions in this band and therefore simplifies the requirements for cross-sensor radiometric calibration. We compile ABI/AHI and VIIRS TOA data with the best quality (cloud-free and low aerosol loading) at chosen AERONET sites. We then run the GeoNEX MAIAC algorithm to retrieve the Ross-Thick-Li-Sparse (RTLS) surface BRDF parameters with or without the AEORNET measured atmospheric aerosol optical depth (AOD) as inputs. The joint retrieval results are considered the best estimate of surface BRDF. We compare the joint BRDF retrievals with the corresponding MAIAC BRDF products, retrieved with ABI/AHI or VIIRS separately, to evaluate their differences. We expect that the jointly retrieved BRDF data are more robust than the standard products and may help us reduce uncertainties in higher-level earth observation satellite products.

Remote Sensing↗
NASA NTRS2011

Twelve and a Half Years of Observations of Centaurus A with RXTE

The Rossi X-ray Timing Explorer has observed the nearest radio galaxy, Centaurus A, in 13 intervals from 1996 August to 2009 February over the 3 - 200 keV band. Spectra accumulated over the 13 intervals were well described with an absorbed power law and an iron line. Cut-off power laws and Compton reflection from cold matter did not provide a better description. For the 2009 January observation we set a lower limit on the cutoff energy at over 2 MeV. The power spectral density function was generated from RXTE/ASM and PCA data as well as an XMM-Newton long look, and clear evidence for a break at 18(+18/-7) days (68% conf.) was seen. Given Cen A's high black hole mass and very low value of L(sub x)/L(sub Edd), the break was a factor of 17+/-9 times higher than the break frequency predicted by the McHardy and coworkers relation, which was empirically derived for a sample of objects, which are radio-quiet and accreting at relatively high values of L(sub bol)/L(sub Edd). We have interpreted our observations in the context of a clumpy molecular torus. The variability characteristics and the broadband spectral energy distribution, when compared to Seyferts, imply that the bright hard X-ray continuum emission may originate at the base of the jet, yet from behind the absorbing line of sight material, in contrast to what is commonly observed from blazars.

Rothschild, R. E.↗
NASA NTRS2005

Low-Luminosity AGN As Analogues of Galactic Black Holes in the Low/Hard State: Evidence from X-Ray Timing of NGC 4258

We present a broadband power spectral density function (PSD) measured from extensive RXTE monitoring data of the low-luminosity AGN NGC 4258, which has an accurate, maser-determined black hole mass of (3.9 plus or minus 0.1) x 10(exp 7) solar mass. We constrain the PSD break time scale to be greater than 4.5 d at greater than 90% confidence, which appears to rule out the possibility that NGC 4258 is an analogue of black hole X-ray binaries (BHXRBs) in the high/soft state. In this sense, the PSD of NGC 4258 is different to that of some more-luminous Seyferts, which appear similar to the PSDs of high/soft state X-ray binaries. This result supports previous analogies between LLAGN and X-ray binaries in the low/hard state based on spectral energy distributions, indicating that the AGN/BHXRB analogy is valid across a broad range of accretion rates.

Markowitz, A.↗
NASA NTRS2004

Chemical Compositions and Abundance Anomalies in Stellar Coronae ADP 99

New atomic data for tackling some of our spectra have been investigated by co-I Laming (NRL), including the effects of recombination on spectral line fluxes that are not included in, for example, the CHIANTI database models. Promising new progress has been made with modelling some of the recent abundance anomaly results in terms of Alven wave-driven separation of neutrals and ions in the upper chromosphere. The problems that existing models have is that they cannot simultaneously explain the low-FIP enhanced solar-like coronae and the high-FIP rich active coronae of RS CVn-like stars. The Alven wave model shows promise with both of these scenarios, with the fractionation or suppression of low-FIP ions depending on the characteristics of the chromosphere. This work is currently in the writing up stage. In summary, the work to-date is making good progress in mapping abundance anomalies as a function of spectral type and activity level. We are also making good progress with modelling that we will be able to test with our observational results. With one more year of effort, we'anticipate that the bulk of the work described above can be published, together with outstanding key studies on anomalies among the different active binaries.

Oliversen, Ronald J.↗
NASA NTRS1998

On-Orbit Calibration of ADEOS OCTS with an AVIRIS Underflight

The Ocean Color Temperature Scanner (OCTS) onboard the Advanced Earth Observation Satellite (ADEOS) was launched on August 17, 1996. Calibration of OCTS is required for use of the on-orbit measured data for retrieval of physical properties of the ocean. In the solar reflected portion of the electromagnetic spectrum, OCTS measures images with nominally 700-m spatial resolution through eight multispectral bands. The objective of this research was to establish the absolute radiometric calibration of OCTS on orbit through an underflight by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). AVIRIS is a NASA Earth-observing imaging spectrometer designed, built and operated by the Jet Propulsion Laboratory (JPL). AVIRIS acquires data from 20-km altitude on a NASA ER-2 aircraft, above most of the Earth's atmosphere. AVIRIS measures the solar reflected spectrum from 370 nm to 2500 nm through 224 contiguous spectral channels. The full width at half maximum (FWHM) of the spectral channels is nominally 10-nm. AVIRIS spectra are acquired as images of 11 km by up to 800 km extent with 20-m spatial resolution. The high spectral resolution of AVIRIS data allows direct convolution to the spectral response functions of the eight multispectral bands of OCTS. The high spatial resolution of AVIRIS data allows for spatial re-sampling of the data to match the ADEOS sensors spatial resolution. In addition, the AVIRIS high spatial resolution allows assessment of the scaling effects due to environmental factors of thin cirrus clouds, sub-pixel cloud cover, white caps, ocean foam, sun-glint, and bright-target adjacency. The platform navigation information recorded by AVIRIS allows calculation of the position and observation geometry of each spectrum for matching to the OCTS measurement. AVIRIS is rigorously characterized and calibrated in the laboratory prior to and following the flight season. The stability and repeatability of AVIRIS calibration have been validated through an extensive series of inflight calibration experiments. In the OCTS portion of the spectrum, using pre- and post-flight runway calibrations of AVIRIS coupled with the on-board calibrator an absolute calibration accuracy of better than 3% spectral, 2% radiometric, and 5% spatial, has been achieved. An analogous satellite underflight calibration experiment was performed with AVIRIS and the Optical Sensor (OPS) onboard the Japanese Earth Resources Satellite (JERS).

Green, Robert O.↗
NASA NTRS2000

On-Orbit Calibration of ADEOS OCTS with an AVIRIS Underflight

The Ocean Color Temperature Scanner (OCTS) onboard the Advanced Earth Observation Satellite (ADEOS) was launched on August 17, 1996. Calibration of OCTS is required for use of the on-orbit measured data for retrieval of physical properties of the ocean. In the solar reflected portion of the electromagnetic spectrum, OCTS measures images with nominally 700-m spatial resolution through eight multispectral bands. The objective of this research was to establish the absolute radiometric calibration of OCTS on orbit through an underflight by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). AVIRIS is a NASA earth-observing imaging spectrometer designed, built and operated by the Jet Propulsion Laboratory (JPL). AVIRIS acquires data from 20-km altitude on a NASA ER-2 aircraft, above most of the Earth's atmosphere. AVIRIS measures the solar reflected spectrum from 370 nm to 2500 nm through 224 contiguous spectral channels. The full width at half maximum (FWHM) of the spectral channels is nominally 10-nm. AVIRIS spectra are acquired as images of 11 km by up to 800 km extent with 20-m spatial resolution. The high spectral resolution of AVIRIS data allows direct convolution to the spectral response functions of the eight multispectral bands of OCTS. The high spatial resolution of AVIRIS data allows for spatial re-sampling of the data to match the ADEOS sensors spatial resolution. In addition, the AVIRIS high spatial resolution allows assessment of the scaling effects due to environmental factors of thin cirrus clouds, sub-pixel cloud cover, white caps, ocean foam, sun-glint, and bright-target adjacency. The platform navigation information recorded by AVIRIS allows calculation of the position and observation geometry of each spectrum for matching to the OCTS measurement. AVIRIS is rigorously characterized and calibrated in the laboratory prior to and following the flight season. The stability and repeatability of AVIRIS calibration have been validated through an extensive series of inflight calibration experiments. In the OCTS portion of the spectrum, using pre-and post-flight runway calibrations of AVIRIS coupled with the on-board calibrator an absolute calibration accuracy of better than 3% spectral, 2% radiometric and 5% spatial has been achieved. An analogous satellite underflight calibration experiment was performed with AVIRIS and the Optical Sensor (OPS) onboard the Japanese Earth Resources Satellite (JERS).

Green, Robert O.↗
NASA NTRS2001

The 3D Recognition, Generation, Fusion, Update and Refinement (RG4) Concept

This paper describes an active (real time) recognition strategy whereby information is inferred iteratively across several viewpoints in descent imagery. We will show how we use inverse theory within the context of parametric model generation, namely height and spectral reflection functions, to generate model assertions. Using this strategy in an active context implies that, from every viewpoint, the proposed system must refine its hypotheses taking into account the image and the effect of uncertainties as well. The proposed system employs probabilistic solutions to the problem of iteratively merging information (images) from several viewpoints. This involves feeding the posterior distribution from all previous images as a prior for the next view. Novel approaches will be developed to accelerate the inversion search using novel statistic implementations and reducing the model complexity using foveated vision. Foveated vision refers to imagery where the resolution varies across the image. In this paper, we allow the model to be foveated where the highest resolution region is called the foveation region. Typically, the images will have dynamic control of the location of the foveation region. For descent imagery in the Entry, Descent, and Landing (EDL) process, it is possible to have more than one foveation region. This research initiative is directed towards descent imagery in connection with NASA's EDL applications. Three-Dimensional Model Recognition, Generation, Fusion, Update, and Refinement (RGFUR or RG4) for height and the spectral reflection characteristics are in focus for various reasons, one of which is the prospect that their interpretation will provide for real time active vision for automated EDL.

Maluf, David A.↗