Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Location and source of ionospheric high latitude troughs

The global extent of the high-latitude troughs from altitudes between approximately 400 and 1100 km are explored using ion composition measurements from the satellite OGO 6. The trough locations are compared with prominent magnetosphere-ionosphere coupling signatures in order to understand the source and controlling mechanisms for these plasma depletions. It is found that, on the average, the troughs at all local times are in the vicinity of the auroral oval and move equatorward in response to increasing magnetic activity. The average trough location is compared with the average polar cap boundary as defined by the convection electric field reversal and the electron trapping boundary, as well as with the maximum horizontal magnetic disturbance associated with the large-scale field-aligned currents. It is concluded that the troughs are mainly the result of enhanced chemical O(+) losses in regions having high convection velocities.

Grebowsky, J. M.↗
NASA NTRS1995

The Octavolateralis System and Mauthner Cell: Interactions and Questions

This paper is an overview of some of the major points to arise in the accompanying contributions of this special symposium issue. The symposium papers arose out of discussions among investigators interested in the inner ear and Mauthner cell, with the focus on hydrodynamic components that activate the Mauthner cell through the octavolateralis system. The intention of the symposium was to investigate the possibility of using our knowledge of the Mauthner system to help understand acoustic processing by the ear, and of using, our knowledge of fish hearing to better understand Mauthner cell function. This is the first attempt to take a broad look at both systems to see how they might function together. As such, these proceedings can serve as a mini-tutorial for investiaators interested in one system or the other. In this summary paper we also identify some of the major uncertainties in our understanding of the ear-Mauthner connection. These include questions about: (1) the identity of the acoustic stimuli that are neuroethologically relevant to the Mauthner system; (2) the relative importance of the various octavolateralis inputs (acoustic, vestibular, or lateral line); (3) the contribution of the different various acoustic endorgans to the Mauthner system; (4) whether the Mauthner system can distinguish sound source location; and (5) whether Mauthner neurobiology is compatible with the prevailing model (the phase model) for determining sound source location by fishes. We believe these issues provide potentially useful avenues of future investigation that should give important insights into both acoustic processing by fish and the function of the Mauthner system.

Eaton, Robert C.↗
NASA NTRS1973

Study of acoustic emission during mechanical tests of large flight weight tank structure

A PPO-insulated, flight-weight, subscale, aluminum tank was monitored for acoustic emissions during a proof test and during 100 cycles of environmental test simulating space flights. The use of a combination of frequency filtering and appropriate spatial filtering to reduce background noise was found to be sufficient to detect acoustic emission signals of relatively small intensity expected from subcritical crack growth in the structure. Several emission source locations were identified, including the one where a flaw was detected by post-test x-ray inspections. For most source locations, however, post-test inspections did not detect flaws; this was partially attributed to the higher sensitivity of the acoustic emission technique than any other currently available NDT method for detecting flaws. For these non-verifiable emission sources, a problem still remains in correctly interpreting observed emission signals.

Mccauley, B. O.↗
NASA NTRS1972

Study of acoustic emission during mechanical tests of large flight weight tank structure

A polyphenylane oxide insulated, flight weight, subscale, aluminum tank was monitored for acoustic emissions during a proof test and during 100 cycles of environmental test simulating space flights. The use of a combination of frequency filtering and appropriate spatial filtering to reduce background noise was found to be sufficient to detect acoustic emission signals of relatively small intensity expected from subcritical crack growth in the structure. Several emission source locations were identified, including the one where a flaw was detected by post-test X-ray inspections. For most source locations, however, post-test inspections did not detect flaws; this was partially attributed to the higher sensitivity of the acoustic emission technique than any other currently available NDT method for detecting flaws.

Nakamura, Y.↗
NASA NTRS1995

Detection and Location of Transverse Matrix Cracks in Cross-Ply Gr/Ep Composites Using Acoustic Emission

Transverse matrix cracking in cross-ply gr/ep laminates was studied with advanced acoustic emission (AE) techniques. The primary goal of this research was to measure the load required to initiate the first transverse matrix crack in cross-ply laminates of different thicknesses. Other methods had been previously used for these measurements including penetrant enhanced radiography, optical microscopy, and audible acoustic microphone measurements. The former methods required that the mechanical test be paused for measurements at load intervals. This slowed the test procedure and did not provide the required resolution in load. With acoustic microphones, acoustic signals from cracks could not be clearly differentiated from other noise sources such as grip damage, specimen slippage, or test machine noise. A second goal for this work was to use the high resolution source location accuracy of the advanced acoustic emission techniques to determine whether the crack initiation site was at the specimen edge or in the interior of the specimen.In this research, advanced AE techniques using broad band sensors, high capture rate digital waveform acquisition, and plate wave propagation based analysis were applied to cross-ply composite coupons with different numbers of 0 and 90 degree plies. Noise signals, believed to be caused by grip damage or specimen slipping, were eliminated based on their plate wave characteristics. Such signals were always located outside the sensor gage length in the gripped region of the specimen. Cracks were confirmed post-test by microscopic analysis of a polished specimen edge, backscatter ultrasonic scans, and in limited cases, by penetrant enhanced radiography. For specimens with three or more 90 degree plies together, there was an exact 1-1 correlation between AE crack signals and observed cracks. The ultrasonic scans and some destructive sectioning analysis showed that the cracks extended across the full width of the specimen. Furthermore, the locations of the cracks from the AE data were in excellent agreement with the locations measured with the microscope. The high resolution source location capability of this technique, combined with an array of sensors, was able to determine that the cracks initiated at the specimen edges, rather than in the interior. For specimens with only one or two 90 degree plies, the crack-like signals were significantly smaller in amplitude and there was not a 1-1 correlation to observed cracks. This was similar to previous results. In this case, however, ultrasonic and destructive sectioning analysis revealed that the cracks did not extend across the specimen. They initiated at the edge, but did not propagate any appreciable distance into the specimen. This explains the much smaller AE signal amplitudes and the difficulty in correlating these signals to actual cracks in this, as well as in the previous study.

Prosser, W. H.↗
NASA NTRS1991

Analysis of Uranian radio emissions, Uranus Data Analysis Program (UDAP)

Progress under this grant has included identifying certain new radio emission components and determining the source location of both these and the two major Uranian radio emission (the SHF and bursty components) by a unique new statistical minimization technique. This new source location technique has subsequently also been applied at Neptune, with considerable success. New radio spectrograms have been prepared to clarify the behavior of such emissions, using both the usual 48-second, log-averaged data and the original 6-second PRA data, the latter showing a number of interesting new features. Also, a plasmasphere was discovered at Uranus, auroral plasma cavities were discovered at both Uranus and Neptune, and it was found that the currently-accepted rotation period for Uranus is in error by a small amount.

Calvert, W.↗
NASA NTRS2018

Recent Advances in SMAP RFI Processing

The measurements made by the Soil Moisture Active/Passive (SMAP) mission are affected by the presence of Radio Frequency Interference (RFI) in the protected 1400-1427 MHz band. In SMAP data processing, the main protection against RFI is a sophisticated RFI detection algorithm which flags sub-samples in time and frequency that are contaminated by RFI and removes them before estimating the brightness temperature. This contribution presents two additional approaches that have been developed to address the RFI concern in SMAP. The first consists in locating sources of RFI; once located, it becomes possible to report RFI sources to spectrum management authorities, which can lead to less RFI being experienced by SMAP in the future. The second is a new RFI detection method that is based on detecting outliers in the spatial distribution of measured antenna temperatures.

Radio Frequency Interference↗
NASA NTRS1993

Models of Neptune's smooth recurrent radio emission

The quantitative response of the Planetary Radio Astronomy (PRA) instrument to a wave with polarization ellipse of arbitrary shape and orientation, arriving at the antennas from any direction, can be determined. This capability is used to model the time variation of intensity and circular polarization over a range of radio frequencies for proposed radio-source locations and emission characteristics at Neptune. At frequencies below 400 kHz the observed variation of intensity, polarization, and phase are closely simulated in an offset tilted dipole magnetic field by conjugate sources at midlatitude with filled emission cones. The phase of emission at higher frequencies is reproduced by sources at lower latitude. Modeled wide-cone emission does not reach the spacecraft at the observed phase nor have the polarization sense observed before closest approach. Source-surface maps of apparent polarization for the period before closest approach when instrumental response is especially sensitive to source location is presented. The method is capable of extension to more realistic models of the magnetic field.

Sawyer, Constance↗
NASA NTRS1987

The sources of Uranus' dominant nightside radio emissions

The broad-bandwidth radio emission detected by Voyager 2 over the nightside of Uranus is examined. It is concluded that the source location of the smooth component is consistent with emission originating near the electron gyrofrequency from a small set of field lines whose foot points lie near the Uranomagnetic southern (dark) pole. The source centroid is at L = 11.5, and extends in latitude between about L = 8 and L = 25. This deduced source region is primarily on closed field lines that pass through the outer radiation belt and have their opposite foot points near the Uranomagnetic northern pole (near the present epoch terminator). The source location of the bursty component is less well defined but is consistent with the set of open field lines which map down to the region surrounding the planet's south magnetic dipole tip.

Kaiser, M. L.↗
NASA NTRS1998

Galileo Direction Finding of Jovian Radio Emissions

The Galileo spacecraft, in orbit about Jupiter, has observed distinct spin modulation of plasma wave emissions near the Ganymede (G1 and G2) encounters in the frequency range from about 100 kHz to approximately 6 MHz. Assuming circularly polarized, transverse electromagnetic radiation, we have used the spin modulation of the sweep-frequency receivers of the electric dipole antenna over many spins to estimate the source location in the spin plane of the spacecraft. Hectometric (HOM) and decametric (DAM) emission is observed by Galileo as a general and continuous background with frequent bursts that last tens of minutes and can be separated by minutes or hours. We have analyzed HOM and DAM emissions observed near Jupiter just after the GI and G2 encounters, including two HOM/DAM "arc" signatures observed after the G2 encounter. These latter appear to be low-frequency extensions of DAM arcs, with source regions along either the Io or the Ganymede flux tube. While the uncertainties associated with the data analysis do not allow a precise source location, the HOM/DAM emission observed near the G1 and G2 encounters is consistent with a gyroresonant source region, but it is necessary to require refraction due to the Io torus to understand the results. To explain emission from apparent source regions above a gyroresonant source region, wave refraction from asymmetries in the Io plasma torus that extend along magnetic field lines is postulated. Alternatively, if such torus density asymmetries do not exist, emission with sources above a gyroresonant source region would require another free-energy source such as energetic plasma beams in the presence of density gradients or temperature anisotropies.

Menietti, J. D.↗
NASA NTRS1976

Direction-finding measurements of type III radio bursts out of the ecliptic plane

A series of two-dimensional direction-finding measurements for three type III solar radio bursts is presented which is based on spin-modulation measurements from two satellites (IMP 8 and Hawkeye I) whose spin axes were nearly perpendicular to each other. The two-dimensional direction-finding technique is combined with a model of the solar-wind plasma density in order to provide determinations of type III source locations out of the ecliptic plane as well as information on the three-dimensional structure of the solar magnetic field at radial distances of 0.2 to 1.0 AU from the sun. The direction-finding technique is described in detail, characteristics of the bursts observed by the two satellites are summarized, and the solar-wind model is outlined. The results show that the source locations follow an Archimedean spiral when projected onto the ecliptic plane but usually follow a constant heliocentric latitude perpendicular to that plane. It is also found that measured source sizes are a factor of two larger than the angular sizes of previously reported solar-flare electron emissions, that the spin-modulation factor tends to be largest near the beginning of a type III event, and that the arrival direction of the radiation varies systematically during an event.

Baumback, M. M.↗
NASA NTRS1977

A computer program for the identification of helicopter impulsive noise sources

A computer program is presented for calculating the source location of implusive noise in helicopters. The program (INSL) is written in FORTRAN for the CDC 7600 computer. Inputs are the rotor operating conditions and the time intervals (T) between rotor 1/rev index and impulsive noises as measured by different microphones. The outputs are the possible noise source locations in terms of rotor radial and azimuthal coordinates. Typical computer time for a run of six microphone measurements is 1.5 sec, and the cost is about 12 cents for the CDC 7600.

Lee, A.↗
NASA NTRS1986

Flow field and near and far sound field of a subsonic jet

Flow and sound field data are presented for a 2.54 cm diameter air jet at a Mach number of 0.50 and a Reynolds number of 300,000. Distributions of mean velocity, turbulence intensities, Reynolds stress, spectral components of turbulence as well as of the near field pressure, together with essential characteristics of the far field sound are reported. This detailed set of data for one particular flow, erstwhile unavailable in the literature, is expected to help promoote and calibrate subsonic jet noise theories. 'Source locations' in terms of the turbulence maxima, coupling between the entrainment dynamics and the near pressure field, the sound radiation paths, and the balance in mass, momentum and sound energy fluxes are discussed. The results suggest that the large scale coherent structures of the jet govern the 'source locations' by controlling the turbulence and also strongly influence the near field pressure fluctuations.

Zaman, K. B. M. Q.↗
NASA NTRS1997

ALDF Data Retrieval Algorithms for Validating the Optical Transient Detector (OTD) and the Lightning Imaging Sensor (LIS)

A linear algebraic solution is provided for the problem of retrieving the location and time of occurrence of lightning ground strikes from in Advanced Lightning Direction Finder (ALDF) network. The ALDF network measures field strength, magnetic bearing, and arrival time of lightning radio emissions and solutions for the plane (i.e.. no Earth curvature) are provided that implement all of these measurements. The accuracy of the retrieval method is tested using computer-simulated data sets and the relative influence of bearing and arrival time data on the outcome of the final solution is formally demonstrated. The algorithm is sufficiently accurate to validate NASA's Optical Transient Detector (OTD) and Lightning Imaging System (LIS). We also introduce a quadratic planar solution that is useful when only three arrival time measurements are available. The algebra of the quadratic root results are examined in detail to clarify what portions of the analysis region lead to fundamental ambiguities in source location. Complex root results are shown to be associated with the presence of measurement errors when the lightning source lies near an outer sensor baseline of the ALDF network. For arbitrary noncollinear network geometries and in the absence of measurement errors, it is shown that the two quadratic roots are equivalent (no source location ambiguity) on the outer sensor baselines. The accuracy of the quadratic planar method is tested with computer-generated data sets and the results are generally better than those obtained from the three station linear planar method when bearing errors are about 2 degrees.

Koshak, W. J.↗
NASA NTRS1995

The evolutionary status of the stellar population in the rho Ophiuchi cloud core

This contribution reports the results of an infrared imaging survey aimed at characterizing the stellar populations associated with the three densest star-forming cores in the Ophiuchus molecular cloud complex. The survey has sufficient sensitivity at J, H, and K (at 5 sigma limits of 16.5, 15.4, and 14.2) to provide a complete census of embedded young stellar objects (YSOs) with masses greater than the hydrogen-burning limit, provided that their ages are less than 3 Myr and that they are obscured by no more than approximately 18 mag of visual extinction. Our data suggest (1) a large fraction (greater than 70%) of the sources located within the cores are still surrounded by circumstellar disks and/or envelopes; and (2) the shape of the initial mass function for masses, M less than 1 solar mass, appears to be consistent with that derived from the solar neighborhood. We also report the results of a deeper imaging survey of centimeter continuum sources (14 sources) in these star-forming cores and in the larger Ophiuchus complex (eight sources). A large fraction (11/14) of the radio sources associated with the cores appear to have infrared excesses diagnostic of circumstellar accretion disks and/or infalling circumstellar envelopes. In these cases, the centimeter continuum radiation most likely diagnoses the ionized component of energetic winds or jets which characterizes YSOs during the disk accretion phase. By contrast, of the eight radio sources located outside dense cores, only two show infrared excesses.

Strom, Karen M.↗
NASA NTRS1991

Uranus as a radio source

The complex nature of the Uranus radio emissions, both magnetospheric and atmospheric, is reviewed, with emphasis on the identification of distinct components and the determination of their source locations. Seven radii components were discovered in addition to the RF signature of lightning in the planet's atmosphere. Six of the seven magnetospheric components are freely propagating emissions; one component, the nonthermal continuum, is trapped in the density cavity between the magnetopause and the dense inner magnetosphere. The radio components are divided into two types according to their emission signature: bursty emission and smooth emission. The inferred source location for the dominant nightside emission is above the nightside magnetic pole, largely overlapping the UV auroral region and the magnetic polar cap. The N-burst component appears to be associated with solar-wind enhancements at Uranus, consistent with the idea that the solar wind was triggering magnetospheric substormlike activity during the encounter.

Desch, M. D.↗
NASA NTRS2006

Phase Calibration of Microphones by Measurement in the Free-field

Over the past several years, significant effort has been expended at NASA Langley developing new Micro-Electro-Mechanical System (MEMS)-based microphone directional array instrumentation for high-frequency aeroacoustic measurements in wind tunnels. This new type of array construction solves two challenges which have limited the widespread use of large channel-count arrays, namely by providing a lower cost-per-channel and a simpler method for mounting microphones in wind tunnels and in field-deployable arrays. The current generation of array instrumentation is capable of extracting accurate noise source location and directivity on a variety of airframe components using sophisticated data reduction algorithms [1-2]. Commercially-available MEMS microphones are condenser-type devices and have some desirable characteristics when compared with conventional condenser-type microphones. The most important advantages of MEMS microphones are their size, price, and power consumption. However, the commercially-available units suffer from certain important shortcomings. Based on experiments with array prototypes, it was found that both the bandwidth and the sound pressure limit of the microphones should be increased significantly to improve the performance and flexibility of the microphone array [3]. It was also desired to modify the packaging to eliminate unwanted Helmholtz resonance s exhibited by the commercial devices. Thus, new requirements were defined as follows: Frequency response: 100 Hz to 100 KHz (+/-3dB) Upper sound pressure limit: Design 1: 130 dB SPL (THD less than 5%) Design 2: 150-160 dB SPL (THD less than 5%) Packaging: 3.73 x 6.13 x 1.3 mm can with laser-etched lid. In collaboration with Novusonic Acoustic Innovation, NASA modified a Knowles SiSonic MEMS design to meet these new requirements. Coupled with the design of the enhanced MEMS microphones was the development of a new calibration method for simultaneously obtaining the sensitivity and phase response of the devices over their entire broadband frequency range. Traditionally, electrostatic actuators (EA) have been used to characterize air-condenser microphones; however, MEMS microphones are not adaptable to the EA method due to their construction and very small diaphragm size [4]. Hence a substitution based, free-field method was developed to calibrate these microphones at frequencies up to 80 kHz. The technique relied on the use of a random, ultrasonic broadband centrifugal sound source located in a small anechoic chamber. The free-field sensitivity (voltage per unit sound pressure) was obtained using the procedure outlined in reference 4. Phase calibrations of the MEMS microphones were derived from cross spectral phase comparisons between the reference and test substitution microphones and an adjacent and invariant grazing-incidence 1/8-inch standard microphone. The free-field calibration procedure along with representative sensitivity and phase responses for the new high-frequency MEMS microphones are presented here.

Shams, Qamar A.↗