Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solvent extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Characterization of Porosity and Pore Accessibility of Vitrinite-Rich Bituminous and Subbituminous Coals by Small-Angle Neutron Scattering, Mercury Intrusion Porosimetry, and Low-Pressure N 2 Adsorption

Three bituminous and one subbituminous vitrinite-rich coals were characterized using small-angle neutron scattering with contrast matching, mercury intrusion porosimetry, and low-pressure N 2 adsorption techniques to quantify their porosity and pore accessibility in an effort to assess their solvent extractabilities, as a first approximation, for manufacturing useful end-products. The techniques revealed consistent results while complimenting one another. The total porosity was found to follow the coal rank with the lowest rank having the highest porosity within the studied coals. The amount of inaccessible pores was found to increase with rank for the bituminous coals studied here. Finally, the increase in the ease of accessibility and total porosity with decreasing rank suggested easier penetration of chemical reagents for solvent extraction, for example.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multi-Sensor Data Acquisition System for Process Monitoring

Idaho National Laboratory is building a new nuclear fuel cycle test bed. This fuel cycle test bed named “Beartooth” will give researchers the opportunity to study the nuclear fuel cycle process. The process operations include the use of centrifugal contactors and process flow for the purification of special nuclear material recovery in used fuel. This new research facility has the need to use non-traditional measurement sensors to determine the state-of-health of the solvent extraction process. These non-traditional sensors can also enhance nuclear nonproliferation supervision and other activities. The non-traditional sensors include accelerometers, acoustic, current, flow, colorimetric, temperature, pH and conductivity. The challenge behind deploying all these sensors, is the need for fast and reliable data collection. The data acquisition system (DAQ) needs to be capable of recording up to 12 accelerometers and/or acoustic microphones simultaneously at rates up to 12.8 kSamples/second/channel. This requires the need for a strong architecture and data collection solution. This summary identifies the system architecture, DAQ, and sensors needed to support non-traditional measurements in a solvent extraction process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

2,3-Butanediol recovery from fermentation broth using membrane pertraction

2,3-Butanediol (BDO) has gained immense interest for use as a platform chemical in the production of many important chemicals such as synthetic rubber, plasticizer, and octane boosters. Using BDO as a precursor for sustainable aviation fuel production may significantly reduce the carbon footprint of the airline industry. However, recovery of BDO is challenging due to its relatively low concentration (∼10 wt %) in fermentation broth and its high affinity for water. In this work, we developed a membrane pertraction process for BDO recovery from biomass derived fermentation broth. Different organic solvents such as hexanol and oleyl alcohol were investigated. With traditional solvent extraction, hexanol required a solvent to feed ratio of 10 to recover >90 % BDO, and oleyl alcohol could recover 35 % of BDO at the same ratio. BDO recovery of >90 % was demonstrated with pertraction; a BDO extraction rate of 15 g 1 m −2 h −1 was achieved using hexanol, and an extraction rate of 10 g 1 m −2 h −1 was achieved using oleyl alcohol. Impurities commonly found in fermentation broth did not affect the separation performance of the pertraction process. In conclusion, this work demonstrates pertraction as a low-footprint, scalable method for recovery of high-purity BDO from fermentation broth.

2,3 butanediol↗
DOE OSTI2020

Sorption and Desorption Study of a Nerve-Agent Simulant from Office Materials for Forensic Applications

Dimethyl methylphosphonate (DMMP) was used as a simulant to investigate the sorption and desorption of G-series nerve agents such as sarin (GB) released into an office space. DMMP was disseminated systematically as an aerosol and vapor on three common office materials, cardboard, polyurethane foam, and cured acrylic-based paint. The amount of DMMP initially captured on the office materials and the amount retained over a period of 10 hours was tracked gravimetrically and by solvent extraction and gas chromatography/mass spectrometry (GC/MS). Physicochemical properties of the office media including the specific surface area per mass, polarity, and Henry’s constants were determined to help explain the capture and release of DMMP that was observed. Polyurethane foam was found to have the largest sorption capacity for DMMP in a low-humidity setting, however, cardboard was found to have the largest sorption capacity at higher humidity. A fraction of the DMMP collected desorbed with first-order kinetics from all of the office materials in an open-air atmosphere over 8 hours. However, importantly for forensic purposes relevant to an indoor attack, a significant quantity (most notably on cardboard) of the nerve agent simulant was retained after 6 weeks and could be analyzed efficiently using solvent extraction followed by GC/MS.

chemical forensics↗
DOE OSTI2024

Influence of Aqueous Phase Acidity on Ln(III) Coordination by N , N , N ', N '-Tetraoctyldiglycolamide

Here, this study highlights the importance of combining distribution ratio measurements with multiple spectroscopic techniques to provide a more comprehensive understanding of organic phase Ln coordination chemistry. Solvent extraction investigations with N,N,N',N'-tetraoctyldiglycolamide (TODGA) in n-heptane reveal the sensitivity of Ln complexation to the HNO 3 concentration. Distribution ratio measurements in tandem with UV–Vis demonstrated that increasing the concentration of HNO3 above 0.5 M with a constant NO 3 – of 1 M increases the number of coordinating TODGA molecules, from a 1:2 to a 1:3 Ln:TODGA complex. At each concentration of HNO 3 considered herein (from 0.01 to 1 M), Eu lifetime analysis demonstrated no evidence of H 2 O coordination. Results from Fourier transform infrared investigations suggest the presence of inner-sphere NO 3 – under low concentrations of HNO 3 when the 1:2 Ln:TODGA complex is present. Increasing the HNO 3 concentration above 0.5 M increases the propensity for outer-sphere interactions by removing the coordinated NO 3 – and saturating the Ln coordination sphere with three TODGA molecules, resulting in the well-established cationic, trischelate homoleptic [Ln(TODGA) 3 ] 3+ complex. This work demonstrates the importance in considering the NO 3 – source for solvent extraction systems. In particular, for systems with an affinity for outer-sphere interactions with molar concentrations of HNO 3 , changing the NO 3 – source can change the inner-sphere coordination of the Ln complex, which, in turn, affects the separation efficacy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding Europium and Terbium Speciation and Ion Pairing in Carbonate Complexes Using Advanced Spectroscopy Techniques

Lanthanide (Ln) elements are critical materials that are typically extracted/mined together. Their separation by solvent extraction from acidic media is well known; however, there are few studies in basic media with carbonate anions. We investigated the complexation of Eu(III) and Tb(III) carbonates as solids and solutions in alkaline K2CO3, wherein we sought to access a Tb(IV) carbonate complex through ozonolysis. L3-edge XANES of Eu and Tb carbonate solids, colorless solutions, and a red-hued Tb solution (obtained by ozonolysis) all showed Ln(III) cations. The absence of evidence for a Tb(IV) complex was confirmed through XAS and EPR analyses, despite the solution exhibiting a deep red color. For solids and solutions, EXAFS results indicate molecular Ln(III)-carbonato anions. In terms of the Eu(III) carbonate coordination number, the coordination does not change upon dissolution of the solid sample. Furthermore, EXAFS for the solutions revealed evidence for the association of potassium cations with the Ln(III)-carbonato anions. Furthermore, this direct observation of contact ion pairing by EXAFS at room temperature is rare. The insights into Ln(III) carbonate complexation and solution speciation afforded by XANES-EXAFS, FT-IR, and EPR provides perspectives that serve as benchmarks for future computational and experimental efforts focused on caustic-side solvent extraction of Ln(III) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A New Triketone Ligand for Extraction of Lithium from Brines**

Recovery of lithium from brines by liquid-liquid solvent extraction (LLE) with diketones and synergistic co-ligands has been investigated for decades, but industrial application has been limited. In pursuit of a ligand with improved properties, a series of ketonamides with beta-carbonyl groups were designed, synthesized, and tested in extraction of lithium from sulfate and carbonate simulants of clay mineral tailing leachates. The best performing ligand, a novel tricarbonyl amide, was characterized for lithium extraction with and without four synergistic co-ligands. Further, the tricarbonyl amide combined with the synergistic co-ligand Cyanex-923 was absorbed on a resin support. The ligand-modified resin was tested for performance in extraction of dilute brine simulants and up to 60 % recovery of lithium was achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Characterization of the ALSEP Process at Equilibrium: Speciation and Stoichiometry of the Extracted Complex

We have determined the identity of the complexes extracted into the ALSEP process solvent from solutions of nitric acid. The ALSEP process is a new solvent extraction separation designed to separate americium and curium from trivalent lanthanides in irradiated nuclear fuel. ALSEP employs a mixture of two extractants, 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra(2-ethylhexyl)diglycolamide (TEHDGA) in n-dodecane, which makes it difficult to ascertain the nature of the extracted metal complexes. It is often asserted that the weak acid extractant HEH[EHP] does not participate in the extracted complex under ALSEP extraction conditions (2–4 M HNO 3 ). However, the analysis of the Am extraction equilibria, Nd absorption spectra, and Eu fluorescence emission spectra of metal-loaded organic phases argues for the participation of HEH[EHP] in the extracted complex despite the high acidity of the aqueous phases. The extracted complex was determined to contain fully protonated molecules of HEH[EHP] with an overall stoichiometry of M(TEHDGA) 2 (HEH[EHP]) 2 ·3NO 3 . Computations also demonstrate that replacing one TEHDGA molecule with one (HEH[EHP]) 2 dimer is likely energetically favorable compared to Eu(TEHDGA) 3 ·3NO 3 , whether the HEH[EHP] dimer is monodentate or bidentate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Design of closed-loop recycling production of a Diels–Alder polymer from a biomass-derived difuran as a functional additive for polyurethanes

Acetalization of biomass-derived 5-hydroxymethyl furfural (HMF) with pentaerythritol produced a difuran (HPH) monomer in the presence of an acid catalyst. A recyclable polymer was then synthesized by Diels–Alder reaction of bismaleimide and the HMF-derived difuran (HPH). A polyurethane, produced from the Diels–Alder polymer has a higher glass transition temperature than a polyurethane, produced from ethylene glycol. The polyurethane, containing Diels–Alder polymer also has a self-healing ability. The Diels–Alder polymer could be hydrolyzed in acidic acetate buffer at 60 °C to produce the monomers for recycling. Each produced monomer was separated by solvent extraction, and the extracted monomers were recovered in different solvent fractions, such as aqueous, ethyl acetate, and acetone fractions. Techno economic analysis was used to assess the minimum selling price ($\$14.1$ per kg) for the primary production of Diels–Alder polymer at a feed capacity of 400 tons per year. The economic viability of the primary recovery process for the most expensive recovered monomer, bismaleimide, was assessed by calculating the minimum selling price of the bismaleimide ($\$15.2$ per kg). In conclusion, a circular closed-loop recycling production process for the Diels–Alder polymer was developed and this approach can produce the Diels–Alder polymer at $8.2 per kg when the feed capacity was 40 ktons per year.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Economic analysis of precious metal recovery from electronic waste through gas-assisted microflow extraction

The recycling of end-of-life (EoL) electronic products is motivated by the enormous investment of resources in their creation and the environmental concerns associated with electronic waste (e-waste). Hydrometallurgical methods that utilize conventional leaching and solvent extraction are often applied to extract target materials from e-waste; however, these techniques have significant technical and economic limitations when extracting high-value, low concentration metals from complex waste streams. This study proposes and evaluates a novel process based on gas-assisted microflow extraction (GAME) that efficiently recovers precious metals from waste printed circuit boards (WPCBs). Further, an economic analysis is conducted to verify the economic feasibility of the GAME-based process at an industrial scale. The economic outputs are further investigated to identify the most cost-effective production strategies, particularly with respect to the plant feedstock rate. It is envisioned that this study may establish a paradigm for making economically-informed decisions for sustainable technologies.

42 ENGINEERING↗
DOE OSTI2021

Chemometric optimisation of pressurised liquid extraction for the determination of alliin and S‐allyl‐cysteine in giant garlic ( Allium ampeloprasum L.) by liquid chromatography tandem mass spectrometry

Abstract Introduction Giant garlic is a functional food that contains different kinds of bioactive molecules with beneficial effects on chronic noncommunicable diseases like diabetes and cardiovascular conditions. Considering biosynthesis pathways, abundance, and biological activity, alliin and S‐allyl‐cysteine were used as chemical markers of organosulphur compounds present in giant garlic. Objective To establish a chemometric optimisation of pressurised liquid extraction for the determination of alliin and S‐allyl‐cysteine in giant garlic by liquid chromatography tandem mass spectrometry (LC–MS/MS). Methodology Samples were blanched (ca. 90°C for 10 min) to inactivate alliinase and γ‐glutamyl transpeptidase enzymes and then freeze‐dried. Chemometric optimisation was performed via response surface methodology based on central composite design (CCD). Organosulphur compound yields were determined applying a validated LC–MS/MS method in multiple reaction monitoring (MRM) mode using the following transitions: for alliin m/z 178 → 74 and for S‐allyl‐cysteine m/z 162 → 41. Results According to CCD results, under constant conditions of pressure (1500 psi) and time (20 min), the optimal conditions for pressurised liquid extraction of alliin and S‐allyl‐cysteine were 70.75 and 68.97% v/v of ethanol in extraction solvent and 76.45 and 98.88°C as extraction temperature, respectively. Multiple response optimisation for the simultaneous extraction of both organosulphur compounds was established via desirability function. Under these conditions, 2.70 ± 0.27 mg g −1 dry weight (DW) of alliin and 2.79 ± 0.22 mg g −1 DW of S‐allyl‐cysteine were extracted. Conclusions These results clearly demonstrated that pressurised liquid extraction is an efficient green technique to extract bioactive organosulphur compounds from giant garlic. Extraction yields were significantly ( p < 0.05) higher than those obtained with conventional ultra‐turrax extraction.

Peterssen‐Fonseca, Darlene↗
DOE OSTI2023

Microporous structure in silicone polymers with polylactic acid and polyethylene glycol microspheres: Synthesis and characterization

Porosity in polymer parts could improve mechanical properties while reducing weight and density. Individual pores must be small enough that bulk mechanical properties are retained but significant enough to reduce the density of the material. Filler materials can be incorporated into polymer matrices and removed to create voids. Here, this paper focuses on creating spherical pores in silicone matrices by inserting and removing core materials or fillers during post-cure. A method was developed to incorporate pore formers into an uncured polymer resin and remove the pore former materials from the matrix. Polyethylene glycol (PEG) and polylactic acid (PLA) microspheres were created and incorporated into silicone matrices as pore formers. Microspheres with controllable size distributions were formed via an emulsion formation. Microspheres are removed from the matrix by solvent extraction and calcination. Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), and optical imaging characterize and determine the successful creation of micropores in the polymer matrices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Changes in nitrate binding with lanthanides in BLPhen complexes

Preorganized ligands such as bis-lactam-1,10-phenanthroline (BLPhen) offer unique selectivity trends in solvent extraction of rare-earth ions, particularly from aqueous nitrate solutions. However, due to the ligand’s lipophilicity it is experimentally challenging to obtain crystal structures of the corresponding lanthanide (Ln):ligand complexes to describe the local structure of the first coordination shell and the role of the nitrate ions in the organic phase. In this work, we report first principles molecular dynamics (FPMD) simulations of the complexation of trivalent lanthanide ions (La, Nd, and Eu) with the BLPhen ligand in the presence of nitrate ions in the dichloroethane (DCE) solvent. We find that two nitrate anions are present in the first solvation shell and the third nitrate anion is far from the first solvation shell in all three [Ln(BLPhen) 2 ] 3+ complexes examined. Moving along the lanthanide series from La to Nd to Eu, the binding pocket formed by the two BLPhen ligands shrinks in size; as a result, the two nitrate configuration changes from one-monodentate/one-bidentate binding mode for La and Nd to all monodentate for Eu. Meanwhile, the total coordination number drops from 11 for La and Nd to 10 for Eu. More interestingly, the bidentate binding in [La(BLPhen) 2 ] 3+ and [Nd(BLPhen) 2 ] 3+ complexes is highly dynamic, frequently switching to monodentate and back. The FPMD insights into the differing modes and dynamics of nitrates in the first coordination shell will be useful for further atomistic understanding of the complex structure, formation, and stability in the organic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sulfonamide and Sulfonamido-phenol Ligands for Extraction of f-Elements from Alkaline High-Level Waste

Alkaline High Level Waste (HLW) has been accumulated at Hanford and Savannah River Sites as a result of reprocessing for nuclear weapons production during the cold war. A large volume (∼100 MGal) has been accumulated in carbon steel tanks at Savannah River (SRS) and Hanford. The tank waste contains three separate phases generated when NaOH was added to previously acidic Purex raffinates: 1-2 Supernatant liquid, salt-cake, and sludge. The sludge consists mainly of insoluble hydroxides of transition metals while the supernate and salt-cake contain caustic-soluble materials, including salts of highly radioactive fission products Cs(I) and Sr(II). Current treatment of alkaline HLW in SRS includes: i) The Actinide Removal Process (ARP), which is based on sorption of {sup 90}Sr and Actinides (An) on monosodium titanate (MST), also known as 'alpha-strike' process, followed by ii) Caustic Side Solvent Extraction (CSSX),4 which is used for the extraction of {sup 137}Cs by modified calixarenes in a hydrocarbon diluent. Residual actinides in some tanks are removed after CSSX by an additional ARP process commonly referred to as 'alpha-finishing'. Despite the success of ARP for Sr and An removal, as it is a sorption process, it represents the kinetic bottleneck of integrated salt waste processing. Hence potential introduction of additional organic ligands for actinide extraction (in a modified CSSX process) could simplify the overall integrated process, making it more efficient and economical, with less titanate needed and shorter sorption time, as some of the actinide component would be removed during CSSX. In this study tri-sulfonamide and o-sulfonamido-phenol (mono-sulfonamide) ligands have been studied as extractants for Sm(III), which is being used as an Am(III) surrogate. Our prior studies in the group using a tri-sulfonamide (iPr-tsa-B) showed favorable extraction for Sm(III) nitrate salts from alkaline solutions. Mono-sulfonamides possess similar orientation of binding sites to pyrocatechols, which have been found to be good ligands for Am(III) binding and extraction from alkaline media. Tri-sulfonamide of the type iPr-tsa-B6 (1 mM in CH{sub 2}Cl{sub 2} solution) was studied for Ln{sup 3+} extraction using Sm(NO{sub 3}){sub 3}.6H{sub 2}0 (10 and 25 μM) in alkaline solution of NaOH (0.05, 0.1, 0.2, 0.3 mM) / 0.1 M NaNO{sub 3}. Stripping of the organic phase was done using 0.1 M HNO{sub 3} and quantification of Sm{sup 3+} was done using ICP-OES at 359.3 nm. The need to improve stability of the complex led to synthesis of compounds with N-donor site closer to the central benzene ring to facilitate cation-π interactions. Synthesis of tri-sulfonamide type A: a) Chloromethyl methyl ether, SnCl{sub 4}, CH{sub 2}Cl{sub 2}, 0 deg. C, N{sub 2}, 4 h, 57%; b) NaN{sub 3}, reflux in H{sub 2}O/acetone for 22 h, 80%; c) PPh{sub 3}, THF/H{sub 2}O, 22 h, 79%; d) p-toluene sulfonyl chloride, Et{sub 3}N, 1,2-DCE, 22 h. Extraction: Sm(NO{sub 3}){sub 3}.6H{sub 2}O (2 mM) in 5 ml of aqueous NaOH (pH 10.5 - 14) + 6 ml of CH{sub 2}Cl{sub 2} solution of msa (20 mole equiv.) were rotated on a wheel (60 rpm; 20 h). Stripping: 5 ml of 0.1 M HNO{sub 3} + CH{sub 2}Cl{sub 2} solution of msa (after extraction, centrifugation and filtration) was rotated on the wheel (60 rpm; 20 h). Sm{sup 3+} was quantified using UV-Visible spectrophotometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Panel Session 55: US DOE Savannah River Operations Office: Liquid Waste Progress

This panel provided an overview of the SRS HLW Liquid Waste Program (history, challenges, opportunities, and future) including discussions of the Defense Waste Processing Facility (DWPF), Tank Closures, Actinide Removal Process/Modular Caustic Side Solvent Extraction Unit, Tank Closure Cesium Removal, and the Salt Waste Processing Facility (SWPF). Panelists with presentations: SRS Liquid Waste Program (James Folk); SRS Liquid Waste Progress (Mark Schmitz); Salt Waste Processing Facility (Frank Sheppard)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Intensified reactive extraction for the acid-catalyzed conversion of fructose to 5-hydroxymethyl furfural

Here we conduct an experimental study of fructose dehydration to 5-hydroxymethyl furfural (HMF) in a biphasic microreactor as a function of residence time, temperature, and sugar loading using methyl butyl iso-ketone (MIBK) and 2-pentanol as extracting solvents. We demonstrate stable operation with maximum HMF yields of 93% and 87% in the two solvents, respectively, at 200 °C and a residence time of 2 s for a 5 wt% fructose aqueous feed. We report the highest optimal HMF space–time yield of 60 kg/L-hr at 200 °C (10 – 2,500-fold higher than published reports). Unexpectedly, an optimum organic-to-water ratio exists that depends on the solvent. Notably, we observe experimentally an increased fructose rate and HMF yield well above the extraction thermodynamic limit and hypothesize that the solvent plays a dual role, that of an extractant to protect HMF from degradation and a modifier of the fundamental chemistry. We expose mass transfer limitations of microreactors at longer residence times and higher temperatures and provide reactivity maps for their design. We show that batch reactors are unfit for high throughput and distributed manufacturing where small, farm-based systems are necessary.

42 ENGINEERING↗
DOE OSTI2020

Update on Full-Scale Retrieval and Transfer System Testing for Pneumatic Conveyance of High-Level Calcine Waste - 20241

The Idaho National Laboratory processed spent nuclear fuel from 1953 to 1994. The process used solvent extraction to separate uranium, resulting in a liquid waste. A calcination process was used to convert the liquid waste to a high-level radioactive solid powder, referred to as calcine. The calcine is stored in stainless steel bins contained within concrete vaults called the Calcined Solids Storage Facilities. There are a total of seven CSSFs. The Calcine Retrieval Project is tasked with retrieving the calcine from the bins of CSSF 1 and pneumatically transferring it to the bins of CSSF 6. CSSF 1 was constructed to be a final calcine repository with no forethought of retrieval. It represents the greatest technical hurdle to calcine extraction of all the CSSFs. The challenges inherent with accessing the calcine, safely extracting it, and securely transporting it are copious and complex. Once the calcine is removed from CSSF1, that facility may be closed, reducing the footprint of waste storage at the INL. The same process for removing Calcine from CSSF1 may then be utilized to remove the calcine from the remaining CSSFs for final treatment and transport to a long-term storage facility. To overcome these inherent challenges with accessing CSSF 1 and extracting the calcine in a timely manner, a full-scale integrated mockup has been constructed. The mockup includes a full-size model of a concentric group of bins from CSSF 1 and a storage vessel representing CSSF 6. All essential elements of the transport design are represented in the Mockup, including motive and makeup air supply (air compressor), a replica of the CSSF6 cyclone, pre-filter, HEPA filter, vacuum pump, and retrieval control devices. Construction on the Mockup was completed in 2018 and testing began in February 2019. It has already proven very beneficial to the CRP. Experience in running the Mockup have aided in the development of retrieval and transport methodologies and the selection of process parameter values. It has also uncovered some unforeseen technological challenges and will continue to be valuable to the testing team as these hurdles are overcome and the process is proven effective. Operations personnel have also benefitted from its use as a training tool and will continue to use the Mockup as a simulator to reproduce problems encountered during extraction and transfer of Calcine from CSSF 1. The knowledge gained during this process will also be of continued benefit as future work is done to remove various types of calcine from the remaining CSSFs. The methodology of safe and secure transfer of radioactive material may be of benefit to others throughout the U.S. Department of Energy complex. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗