Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solubilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Plant organic matter inputs exert a strong control on soil organic matter decomposition in a thawing permafrost peatland

Peatlands are climate critical carbon (C) reservoirs that could become a C source under continued warming. A strong relationship between plant tissue chemistry and the soil organic matter (SOM) that fuels C gas emissions is inferred, but rarely examined at the molecular level. Here we compared Fourier transform infrared (FT-IR) spectroscopy measurements of solid phase functionalities in plants and SOM to ultra-high-resolution mass spectrometric analyses of plant and SOM water extracts across a palsa-bog-fen thaw and moisture gradient in an Arctic peatland. From these analyses we calculated the C oxidation state (NOSC), a measure which can be used to assess organic matter quality. Palsa plant extracts had the highest NOSC, indicating high quality, whereas extracts of Sphagnum, which dominated the bog, had the lowest NOSC. The percentage of plant compounds that are less bioavailable and accumulate in the peat, increases from palsa (25%) to fen (41%) to bog (47%), reflecting the pattern of percent Sphagnum cover. The pattern of NOSC in the plant extracts was consistent with the high number of consumed compounds in the palsa and low number of consumed compounds in the bog. However, in the FT-IR analysis of the solid phase bog peat, carbohydrate content was high implying high quality SOM. Here, we explain this discrepancy as the result of low solubilization of bog SOM facilitated by the low pH in the bog which makes the solid phase carbohydrates less available to microbial decomposition. Plant-associated condensed aromatics, tannins, and lignin-like compounds declined in the unsaturated palsa peat indicating decomposition, but lignin-like compounds accumulated in the bog and fen peat where decomposition was presumably inhibited by the anaerobic conditions. A molecular-level comparison of the aboveground C sources and peat SOM demonstrates that climate-associated vegetation shifts in peatlands are important controls on the mechanisms underlying changing C gas emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Green solvent-processable poly(3-hexylthiophene) derivative maintains high hole mobility in diodes

The development of environmentally sustainable fabrication methods for organic solar cells (OSCs) is critical to enable their large-scale adoption. Conventional solution-processed OSCs often rely on halogenated, toxic solvents that pose health and environmental risks, limiting their scalability. This is because π-conjugated polymers tend to have a low solubility in non-halogenated solvents. A common strategy to enhance solubility in alternative solvents is through the incorporation of polar solubilizing groups, often on every repeat unit of at least one monomer. However, too many polar side chains tend to disrupt favorable morphology and decrease charge transport properties. In this study, we demonstrate that a minimal degree of side chain functionalization can improve green solvent processability while preserving electrical performance. We tested this hypothesis using our previously reported random copolymer derivative of poly(3-hexylthiophene) (P3HT) where ∼10 mol% of the side chains are 6-pentanoatehexyl side chains. We find that this low-level functionalization significantly broadens the solvents that can be used to process P3HT to less toxic solvents such as o-xylene and anisole. Furthermore, the copolymer processed from greener solvents showed high hole mobilities (∼10⁻ 3 cm 2 /Vs by the Space-Charge Limiting Current method in diodes), comparable to P3HT films cast from toxic chloroform. These findings suggest that minimal side-chain modification is a viable strategy for expanding green solvent compatibility while preserving electrical performance, paving the way toward more sustainable organic semiconductor designs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Topology and ground state control in open-shell donor-acceptor conjugated polymers

Donor-acceptor (DA) conjugated polymers (CPs) with narrow bandgaps and open-shell (diradical) character represent an emerging class of materials whose rich behavior emanates from their collective electronic properties and diminished electron pairing. However, the structural and electronic heterogeneities that define these materials complicate bandgap control at low energies and connections linking topology, exchange interactions, and (opto)electronic functionality remain nascent. To address these challenges, we demonstrate structurally rigid and strongly π-conjugated copolymers comprised of a solubilizing thiadiazoloquinoxaline acceptor and cyclopenta[2,1-b:3,4-b']dithiophene or dithieno[3,2-b:2',3'-d]thiophene donors. Atom-specific substitution modulates local aromatic character within the donor resulting in dramatic differences in structural, physicochemical, electronic, and magnetic properties of the polymers. These long-range π-mediated interactions facilitate control between low-spin aromatic and high-spin quinoidal forms. This work provides a strategy to understand the evolution of the electronic structure within DA CPs, control the ground state spin multiplicity, tune spin-spin interactions, and articulate the emergence of their novel properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rapid High-Resolution Analysis of Polysaccharide-Lignin Interactions in Secondary Plant Cell Walls Using Proton-Detected Solid-State NMR

The plant secondary cell wall, a complex matrix composed of cellulose, hemicellulose, and lignin, is crucial for the mechanical strength and water-proofing properties of plant tissues, and serves as a primary source of biomass for biorenewable energy and biomaterials. Structural analysis of these polymers and their interactions within the secondary cell wall has been heavily relying on 13 C-based solid-state NMR techniques. In this study, we explore the application of 1 H-detected solid-state NMR techniques for rapid, high-resolution structural characterization of polysaccharides and lignin, demonstrated on the stems of hardwood eucalyptus. We explored the use of synthesized 2D spectra to resolve central 1 H resonances and the combined application of 3D hCCH and hCHH experiments for complete resonance assignment and unambiguous identification of lignin-carbohydrate interactions. Our findings emphasize the central role of acetylated three-fold xylan conformers, rather than two-fold, in stabilizing the carbohydrate-lignin interface, with glucuronic acid sidechains in eucalyptus glucuronoxylan colocalizing with lignin, revised cellulose-lignin interactions involving uncoated microfibril surfaces, and pectin-lignin interactions indicative of early-stage lignification. These results present a novel approach for rapid structural analysis of lignocellulosic biomaterials without the need for solubilization or extraction.

09 BIOMASS FUELS↗
DOE OSTI2023

Exploring the Role of Neutral 4-Amino-1,2,4-triazole in the Formation of Hexanuclear f-Element Hydrolysis Products

Our recent observations of an unexpected Ce(III) hydrolysis product from the reaction of 4-amino-1,2,4-triazole (4-NH 2 -1,2,4-Triaz) with CeCl 3 ·7H 2 O, [Ce 6 (μ 3 -O) 4 (μ 3 -OH) 2 (μ 3 -Cl) 2 (Cl) 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ]·7H 2 O, the first high-nuclearity lanthanide complex where all Ln atoms are connected pairwise through 12 N-donor ligands or 12 neutral bridging ligands of any type, prompted us to explore the utility of this ligand in trapping additional f-element examples. Reactions of LnCl 3 ·6H 2 O (Ln = Nd, Eu, Ho) with a large excess of 4-NH 2 -1,2,4-Triaz (20 equiv) and with the addition of small amounts of water to help solubilize the metal salts led to the isolation of the unique hydrolysis products [Nd 6 (μ 3 -OH) 8 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ][Cl 4 ]·2H 2 O, [Eu 6 (μ 6 -Cl) 0.23 (μ 3 -O 0.77 ) 4 (μ 3 -O) 2.6 (μ 3 -Cl) 0.4 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ], and [Ho 6 (μ 6 -Cl) 0.21 (μ 3 -O 0.79 ) 4 (μ 3 -OH) 2 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ][Cl] 3.4 . Here, we also report a Ce(III) analogue prepared in glassware contaminated with Pb(OAc) 2 , namely, [Ce 6 (μ 3 -OH) 8 (BrPbBr 5 )(μ 2 -4-NH 2 -1,2,4-Triaz) 11.5 (OH 2 ) 6 ][Pb 0.84 Br 4.2 ][Br] 3.8 ·2(4-NH 2 -1,2,4-Triaz)·3.6H 2 O. The Nd(III) complex is the structurally most ordered with a clear [Nd 6 (μ 3 -OH) 8 ] cluster core, while the Eu(III) and Ho(III) compounds contain partial occupancy of a μ 6 position and thus result in an incomplete Ln 6 O 9 cluster core formation. The crystallographic results suggest that the 4-NH 2 -1,2,4-Triaz ligand brings Ln(III) ions together, followed by the formation of an Ln 6 O 8 or Ln 6 O 9 core with whatever remaining anions or ligands can be incorporated. Given the complexity of the hydrolysis products of nuclear waste, we expect to continue to find a myriad of closely related complex structures of these types for the f-elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Short-Term Inhibition and Long-Term Enhancement of Irreversible Trace Metal Binding to Goethite in Multi-Metal Systems

Iron (oxyhydr)oxide minerals are important sorbents of trace metals in aquatic environments. Adsorption–desorption hysteresis has been documented for trace metals after aging, suggesting that they become incorporated over time. We previously found that ion size controls the extent of irreversible metal binding of single metals to goethite. In this study, we evaluate how the presence of multiple metals influences irreversible binding. Mixed Ni–Zn and Ni–Cd solutions were aged with goethite at pH 7 for 2 days, 30 days, and 60 days, after which isotope exchange experiments were performed to assess the lability of the adsorbed metal pools. After 2 days of aging, Ni and Cd in mixed-metal systems were more labile than in single-metal systems, indicating that competitive adsorption may partially block irreversible binding on short time scales. After 60 days, all three metals had larger irreversibly bound fractions than in single-metal systems. X-ray absorption near-edge structure (XANES) spectroscopy indicates that irreversibly bound fractions correlate with incorporation into goethite. This study demonstrates that pools of coadsorbed metals are bioaccessible on a time scale of minutes. Cooperative effects promote the structural sequestration of even large trace metals, causing reactive transport models to likely overpredict metal mobility. Long-term metal entrapment processes hinder micronutrient availability, impact contaminant sequestration and critical mineral recovery, and yield complex pathways through which metal solubilization may be enhanced or hindered during redox cycling.

58 GEOSCIENCES↗
DOE OSTI2026

Desorption of Phosphate from Iron-Bearing Soil Minerals by a Plant Secondary Metabolite

In soils, phosphorus readily adsorbs to the surfaces of ubiquitous iron (oxyhydr)oxide minerals, rendering it less accessible to plants and microorganisms. Plants have a number of strategies to access iron, among them the secretion of redox-active metabolites from their roots. Although these strategies likely increase the bioavailability of surface-adsorbed phosphorus through reductive dissolution, their effect on phosphorus cycling has not yet been investigated. We tested the ability of fraxetin, a coumarin-type redox-active metabolite produced by the model plant Arabidopsis thaliana and other dicotyledon plant species, to reductively solubilize phosphate from the surface of ferrihydrite. Our findings show that, at low and neutral pH, fraxetin increased aqueous phosphate concentrations under both oxic and anoxic conditions; at high pH, it was only effective in anoxic experiments. Additionally, a combination of liquid chromatography–mass spectrometry and spectroscopic methods demonstrated substantial fraxetin adsorption to the mineral surface but showed that iron reduction did not alter the mineral structure or change the nature of the chemical environment of the phosphorus atom over short time scales. These results provide evidence that the secretion of redox-active metabolites from roots is likely to be an effective phosphorus acquisition tactic in iron-rich soils.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Scale-Up of a Two-Stage Cu-Catalyzed Alkaline-Oxidative Pretreatment of Hybrid Poplar

A two-stage alkaline-oxidative pretreatment of hybrid poplar was investigated at scale (20 L reactor volume) with the goals of understanding how reaction conditions as well as interstage mechanical refining impact downstream process responses. The pretreatment comprises a first stage of alkaline delignification (alkaline pre-extraction) followed by a second delignification stage employing Cu-catalyzed alkaline hydrogen peroxide with supplemental O 2 (O 2 -enhanced Cu-AHP). Increasing pre-extraction severity (i.e., temperature and alkali loading) and pre-treatment oxidation (increasing H 2 O 2 loading) were found to increase mass and lignin solubilization in each stage. Lignin recovered from the first stage was subjected to oxidative depolymerization and led to aromatic monomer yields as high as 23.0% by mass. As a result, lignins recovered from the second stage Cu-AHP pretreatment liquors were shown to exhibit aliphatic hydroxyl contents more than six-fold higher than for a typical hardwood kraft lignin, indicating these lignins could serve as a biobased polyol for a range of polyurethane applications.

09 BIOMASS FUELS↗
DOE OSTI2026

Molecular Modeling of Surfactant Interaction on Phospholipid Bilayers Mimicking Corneal Epithelium

Surfactants found in consumer products can compromise eye corneal membrane integrity upon accidental exposure. Traditional in vitro and in vivo approaches to evaluate membrane–surfactant interaction pose experimental limitations such as species variability, reproducibility, and most often do not provide the overall picture. These limitations motivate the use of in silico models to study phenomena like cellular disruption assays caused by surfactants at the molecular scale. In this work, coarse-grained molecular dynamics simulations have been employed to investigate how nonionic alcohol ethoxylate (AE) and anionic surfactant alcohol ethoxy sulfate (AES) interact with lipid bilayer liposomes that mimic corneal epithelial cell membranes. The spherical liposome is composed of 1,2-dihexadecanoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-di(9Z-octadecenoyl)-sn-glycero-3-phosphoethanolamine (DOPE), 1,2-di(9Z-octadecenoyl)-sn-glycero-3-phospho-l-serine (DOPS), and cholesterol, resembling the composition of the corneal epithelial cells’ membrane bilayer. The simulation consisted of varying degrees of representative surfactant compositions and two initial types of surfactant configurations within or outside the liposome. Our results reveal that both surfactants induce outer leaflet bulging, agreeing with membrane solubilization models. The more highly ethoxylated surfactant, AE, caused more consistent inner leaflet disruption than AES, resulting in significantly more water permeation and membrane thinning. In addition, both surfactants increase the lateral diffusion of lipids within the membrane layers, with higher ethoxylated AE showing a stronger effect than AES. This study demonstrates how surfactant structure and localization influence bilayer membrane integrity, offering mechanistic insights into the irritation potential, thus guiding the rational design of effective surfactant-based formulations.

Lipids↗
DOE OSTI2022

Small Molecule Sorting: A Fluorescence Study of Microemulsions

The application of microemulsions to a wide range of industries relies on their ability to solubilize small molecules with vastly different structures. Herein, we use multiple fluorescence techniques to probe ionic (rhodamine 6g, r6g), polar (coumarin 153, c153), nonpolar (diphenylanthracene, DPA), and amphiphilic (laurdan) small molecules in a nonionic, bicontinuous microemulsion of varying hydration. All fluorophores investigated were found to associate with the surfactant region despite their different structures and properties. The hydration of the surfactant layer was found to increase linearly with water addition, but while this initially increases the fluidity of the surfactant layer, fluorescence anisotropy of c153 and r6g indicates a stiffening of the surfactant at water content >60%. This stiffening of the surfactant layer at higher water content correlates with a morphological change in the microemulsion from a bicontinuous structure to droplets. In contrast, the nonpolar DPA shows a change in partitioning as hydration changes, increasing its association with the oil domain. Altogether, these studies elucidate not only the capability of these microemulsions to host a range of small molecules in the surfactant layer with tunable position but also the ability to probe the driving force of bulk structural changes in these heterogeneous fluids.

25 ENERGY STORAGE↗
DOE OSTI2020

Sulfur-Donor Solvents Strongly Coordinate Pb 2+ in Hybrid Organic–Inorganic Perovskite Precursor Solutions

Strong coordination between Lewis-basic processing additives and the Lewis-acidic lead halide in hybrid organic–inorganic perovskite (HOIP) precursor solutions is required to solubilize the lead halide, and subsequently access the appropriate crystallization kinetics and attain the desired morphology of perovskite active layers. While oxygen-donor solvents and additives, such as dimethylformamide and dimethyl sulfoxide, are widely used for perovskite processing, we demonstrate here that “soft” sulfur-donor solvents exhibit stronger coordination to the “borderline soft” Lewis acid Pb 2+ center of PbI 2 relative to “hard” O-donor solvents in the precursor solution. The stronger coordination of S-donor solvents compared to O-donor solvents to Pb 2+ implies that such compounds can be useful additives to HOIP precursor solutions. Density-functional calculations of the enthalpy change resulting from the coordination of solvents to Pb 2+ provide direct numerical comparison of the strength of O-donor and S-donor coordination with Pb 2+ and expands the library of candidate S-donor compounds. Our results provide a roadmap for processing additive selection and expand the previously limited choice of perovskite processing additives to include strongly coordinating S-donor compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electron Spin Polarization and Rectification Driven by Chiral Perylene Diimide-Based Nanodonuts

The chirality-induced spin selectivity (CISS) effect allows thin-film layers of chiral conjugated molecules to function as spin filters at ambient temperature. Through solvent-modulated dropcasting of chiral l- and d-perylene diimide (PDI) monomeric building blocks, two types of aggregate morphologies, nanofibers and nanodonuts, may be realized. Spin-diode behavior is evidenced in the nanodonut structures. Stacked PDI units, which form the conjugated core of these nanostructures, dominate the nanodonut–Au electrode contact; in contrast, the AFM tip contacts largely the high-resistance solubilizing alkyl chains of the chiral monomers that form these nanodonuts. Current–voltage responses of the nanodonuts, measured by magnetic conductive AFM (mC-AFM), demonstrate substantial spin polarizations as well as spin current rectification ratios (>10) that exceed the magnitudes of those determined to date for other chiral nanoscale systems. Furthermore, these results underscore the potential for chiral nanostructures, featuring asymmetric molecular junctions, to enable CISS-based nanoscale spin current rectifiers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

LHCSR1 Functions as a Dimmer Switch for Light Harvesting

In oxygenic photosynthesis, high light leads to a set of photoprotective processes, known as nonphotochemical quenching, that are required for fitness. In moss and algae, the pigment−protein complex, light-harvesting stress-related (LHCSR), is crucial for photoprotection. Acidification of the thylakoid lumen under high light triggers the activation of LHCSR and the conversion of the xanthophyll violaxanthin into zeaxanthin, which is found within LHCSR. These interrelated molecular components combine to turn on a safety valve that dissipates excess energy as heat. Previous studies of detergent-solubilized LHCSR1 found that pH and zeaxanthin regulate distinct quenching sites via the protein conformation. However, protein function in the native membrane environment can be significantly different. In this work, we applied single-molecule fluorescence spectroscopy to LHCSR1 in membrane nanodiscs. The membrane environment enhanced total quenching, regardless of pH or zeaxanthin-binding. pH-dependent quenching was still observed whereas zeaxanthin-dependent quenching was suppressed. Conformational changes also increased in the membrane, establishing that the local environment can change the nature of the equilibrium between light harvesting and photoprotection.

Hoffmann, Madeline P. [Massachusetts Inst. of Tech↗
DOE OSTI2026

Local Chain Dynamics in Sequence-Controlled Polymers as a Tunable Handle for Rare Earth Sequestration

Chain dynamics govern the intricate behaviors of proteins, underpinning functions such as catalysis, recognition, and stimulus response, and are an increasingly appreciated aspect of structure–function relationships. Analogously, manipulating chain dynamics and structure in abiotic polymers via sequence control is an exciting, yet underexplored, strategy for improving material functions. In this work, we report a systematic study relating the sequence of polymeric sequestrants to their structure and dynamics, as well as to their binding affinity and selectivity for model substrates, rare earth elements (REEs). A series of sequence-controlled polymers with metal chelating, solubilizing, and structure forming monomers was synthesized via multiblock polymerization, yielding compositionally identical polymers with spectroscopically resolved domains and distinct morphologies. Using a combination of small-angle X-ray scattering and 19 F NMR relaxometry measurements, we connected differences in polymer structure and dynamics to polymer sequence variables such as the patchiness (density) of the structure forming monomer and the location of the chelating monomer. Furthermore, we found that, relative to calcium, all polymers in the series collapse more and have slower dynamics when binding REEs (lanthanum and lutetium) , though the extent of these effects were sequence-dependent and localized to specific domains within the polymer. Notably, sequence-controlled polymers that exhibited the largest conformational and dynamic changes upon binding REEs also bound REEs with the greatest affinity and modest selectivity. Collectively, these results correlate monomer patterning with dynamics, morphology, and REE binding performance en route to the development of efficient and selective macromolecular chelators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical Oxidation of Metal–Catechol Complexes as a New Synthesis Route to the High-Quality Ternary Photoelectrodes: A Case Study of Fe 2 TiO 5 Photoanodes

A new electrochemical, solution-based synthesis method to prepare uniform multinary oxide photoelectrodes was developed. This method involves solubilizing multiple metal ions as metal-catechol complexes in a pH condition where they are otherwise insoluble. When some of the catechol ligands are electrochemically oxidized, the remaining metal complexes become insoluble and are deposited as metal-catechol films on the working electrode. The resulting films are then annealed to form crystalline multinary oxide electrodes. Since catechol can serve as a complexing agent for a variety of metal ions, the newly developed method can be used to prepare a variety of multinary oxide films. In the present study, we used this method to prepare n-type Fe 2 TiO 5 photoanodes and investigated their photoelectrochemical properties for use in a photoelectrochemical water splitting cell. We also performed a computational investigation with two goals. The first goal was to investigate small electron polaron formation in Fe 2 TiO 5 . Charge transport in most oxide photoelectrodes involves small polaron hopping, but small polaron formation in Fe 2 TiO 5 has not been examined prior to this work. The second goal was to investigate the effect of substitutional Sn doping at the Fe site on the electronic band structure and the carrier concentration of Fe 2 TiO 5 . Here, the combined experimental and theoretical results presented in this study greatly improve our understanding of Fe 2 TiO 5 for use as a photoanode.

14 SOLAR ENERGY↗
DOE OSTI2021

Copper-Catalyzed Oxidation of Hydrazones to Diazo Compounds Using Oxygen as the Terminal Oxidant

In this work, a mild method for accessing diazo compounds via aerobic oxidation of hydrazones is described. This catalytic transfor-mation employs a Cu(OAc) 2 /pyridine catalyst and molecular oxygen from ambient air as the terminal oxidant, generating water as the sole byproduct and affording the desired diazo compounds within minutes at room temperature. A broad array of electronically diverse aryldiazo esters, ketones and amides can be accessed. Pyridine dramatically enhances the rate of the reaction by solubilizing the copper catalyst and serving as Brønsted base in the turnover-limiting proton-coupled oxidation of hydrazone by copper(II). Insights gained from mechanistic studies led to expansion of the scope of this method to include diaryl hydrazones, delivering diaryl diazomethane derivatives, which cannot be accessed via established diazo transfer meth-ods. The products of this method may be employed in rhodium carbene catalysis without isolation of the diazo intermediate to afford cyclopropane products in good yield with high enantioselectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Deacetylation and Mechanical Refining (DMR) and Deacetylation and Dilute Acid (DDA) Pretreatment of Corn Stover, Switchgrass, and a 50/50 Corn Stover/Switchgrass Blend

The most economical feedstock available to future lignocellulosic biorefineries may be a feedstock blend. Corn stover, switchgrass, and a 50:50 blend of corn stover and switchgrass were subjected to three different dilute alkali deacetylation conditions in a 90 L reactor prior to either mechanical refining (DMR) in a disc refiner followed by a Szego mill or dilute acid pretreatment (DDA) at five different conditions in a 4 L batch steam explosion reactor. The forty-five DDA and nine DMR slurries were subjected to high solids enzymatic hydrolysis at an enzyme loading of 15 mg protein per gram cellulose using Novozymes Cellic CTec3 (DDA) or a 4:1 mix of Novozymes Cellic CTec3:HTec 3 (DMR). The highest glucose yield was achieved using DMR processed corn stover from the high severity deacetylation condition (92 °C and 100 kg NaOH/ODMT) at 95.9% ± 0.8%, while the greatest monomeric glucose yields for switchgrass were between 75% to 80%. The glucose yields from saccharification of the 50:50 corn stover/switchgrass blend was approximately the average of the two individual feedstocks for both DDA and DMR processes. Statistical analysis showed that for a given feedstock type dilute alkali deacetylation severity had a significant impact (p < 0.05) on enzymatic hydrolysis yields, and for a given deacetylation severity the feedstock type had a significant effect on glucose conversion with the addition of switchgrass resulting in lower glucose yields. A blending strategy to maximize enzymatic hydrolysis sugar yields while reducing carbohydrate solubilization during the alkaline treatment step was proposed that allows deacetylation of feedstocks with different recalcitrance at optimal conditions for that feedstock, then blending prior to enzymatic hydrolysis.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗