Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution mechanism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Elucidating microstructural evolution and hardness variation across friction self-piercing riveted Al-7055 using synchrotron X-ray scattering and advanced microscopy techniques

Friction self-piercing riveting (FSPR) is a unique hybrid joining technique that combines the advantages of mechanical interlocking, frictional heat, and solid-state joining (if metallurgically compatible) to produce crack free joints in high strength and/or low-ductility alloys at room temperature. Here, in the current study, Al-7055 sheets were joined using FSPR for lightweight automotive applications and significant microhardness variations were observed across the joint cross-section. A detailed microstructural characterization at multiple length scales was carried out using advanced electron microscopy and X-ray scattering techniques to provide a fundamental understanding of the process-structure-property relationships. The relative contributions of microstructural characteristics at various length scales (i.e., grain size, dislocation density, solute concentration, precipitate nature) to strengthening were estimated using existent formulations (i.e., Hall-Petch, Taylor, precipitate bypass/shear equations) and correlated to the observed microhardness values across different regions. Small-angle X-ray scattering and scanning transmission electron microscopy revealed significant changes in the size and volume fraction of precipitate species, i.e., GP-I Zones, η′, and Mg/Zn solute co-clusters, depending on the process region. It was observed that the dissolution of the small η′/GP-I zones (T ∼ 150–200 °C) in the heat-affected zone were the key reason for the hardness drop. Further, it was shown that solid-solution, dislocation, grain size and solute co-cluster strengthening played a key role in the thermo-mechanically affected zone and grain-refined zone (GRZ). Finally, these observations were leveraged along with the Zener-Holloman relationship and grain size in the GRZ to estimate the peak joining temperature of the GRZ (∼ 350 °C) near the steel rivet.

aluminum 7xxx alloy↗
NASA NTRS2001

Polyimide Composites from 'Salt-Like' Solution Precursors

Four NASA Langley-developed polyimide matrix resins, LaRC(TM)-IA, LaRC(TM)-IAX, LaRC(TM)-8515 and LaRC(TM)-PETI-5, were produced via a 'saltlike' process developed by Unitika Ltd. The salt-like solutions (65% solids in NMP) were prepregged onto Hexcel IM7 carbon fiber using the NASA LaRC multipurpose tape machine. Process parameters were determined and composite panels fabricated. The temperature dependent volatile depletion rates, the thermal crystallization behavior and the resin rheology were characterized. Composite molding cycles were developed which consistently yielded well consolidated, void-free laminated parts. Composite mechanical properties such as the short beam shear strength; the longitudinal and transverse flexural strength and flexural modulus; the longitudinal compression strength and modulus; and the open hole compression strength and compression after impact strength were measured at room temperature and elevated temperatures. The processing characteristics and the composite mechanical properties of the four intermediate modulus carbon fiber/polyimide matrix composites were compared to existing data on the same polyimide resin systems and IM7 carbon fiber manufactured via poly(amide acid) solutions (30-35% solids in NMP). This work studies the effects of varying the synthetic route on the processing and mechanical properties of the polyimide composites.

Cano, Roberto J.↗
DOE OSTI2024

Mechanisms and site requirements for NO and NH 3 oxidation on Cu/SSZ-13

Two series of Cu/SSZ-13 catalysts were synthesized via aqueous solution and solid-state ion exchange using SSZ-13 supports of varying Si/Al ratios. The isolated and multinuclear Cu content of these catalysts were determined by H 2 temperature programmed reduction (H 2 -TPR). Multinuclear Cu in these catalysts, including in situ Cu- dimers formed from ZCu II OH coupling and permanent CuO clusters, are active species for dry NO oxidation. NH 3 oxidation on these catalysts follows an internal SCR (i-SCR) mechanism, i.e., a portion of NH 3 is first oxidized to NO, then NO is selectively reduced by the remaining NH 3 to N 2 . NH 3 oxidation displays distinct kinetic behavior below ~300 °C and above ~400 °C. At low temperature the results indicate that NH 3 -solvated mobile Cu-ions are the active centers. CuO clusters, when present, also contribute to the low temperature activity by catalyzing NH 3 oxidation to NO. At high temperature, in situ Cu-dimers and CuO clusters catalyze NH 3 oxidation to NO, and isolated Cu-ions catalyze SCR to realize the cascade turnovers. For both NO and NH 3 oxidation, Cu-dimers balanced by framework charges of close proximity appear to be more active than Cu-dimers balanced by distant framework charges. However, the former Cu-dimers are less stable than the latter and tend to split into monomers in the presence of vicinal Brønsted acid sites. Via density functional theory (DFT) calculations, the i-SCR mechanism for low temperature NH 3 oxidation, i.e., the energetic favorability for the involvement of the NO intermediate, is justified. Furthermore, the DFT results also agree with experimental data that the formation of Cu-dimers from ZCu II OH dimerization is essential for NH 3 oxidation at high temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scale-Up and Modeling Efforts Using an Omniphobic Surface Treatment for Mitigating Solids Deposition

Abstract Gas hydrates, waxes and asphaltenes represent some of the most significant flow assurance challenges, especially in subsea lines, where treatment options can be limited. Currently, complete avoidance is the primary strategy for hydrate management, while chemical or mechanical flushing/pigging may be utilized for other solids. Each system must also be treated with individualized solutions, as there have been no proved one-size-fits-all technologies demonstrated to date. As an alternative to constant chemical injection or thermodynamic controls such as insulation or heating, a robust omniphobic surface treatment material has been developed which has been shown in previous studies to significantly reduce the adhesion of flow assurance solids, resulting in lower risk for deposition and plugging of gas hydrates, waxes, and asphaltenes. As part of a Department of Energy study, laboratory scale tests were performed on a variety of apparatuses ranging from micromechanical force (micron scale) to laboratory flow loop testing (meter scale). While the results from these tests have been promising, there can be some disconnects between lab-scale observations and field-scale testing. Several factors can result in discrepancies between small-scale bench-top studies and deployment-scale efforts. These include flow conditions (Reynolds number, flow regime), chemistry (synthetic vs. crude oils, gas composition, and additives), physical differences (pipeline material, size, and geometry), etc. This work will describe the actions taken to better understand the deployment and performance of a material such as this omniphobic surface treatment in field scenarios, and to build confidence for deployment in a production scenario. These efforts include modeling field production scenarios using models developed from lab observations, application of the material to field-scale equipment to better understand application challenges, and expanded survivability and longevity testing. Understanding the bridge between laboratory testing and full-scale deployment allows for better technique and risk mitigation for field scale testing.

03 NATURAL GAS↗
NASA NTRS1991

Nonequilibrium Phase Chemistry in High Temperature Structure Alloys

Titanium and nickel aluminides of nonequilibrium microstructures and in thin gauge thickness were identified, characterized and produced for potential high temperature applications. A high rate sputter deposition technique for rapid surveillance of the microstructures and nonequilibrium phase is demonstrated. Alloys with specific compositions were synthesized with extended solid solutions, stable dispersoids, and specific phase boundaries associated with different heat treatments. Phase stability and mechanical behavior of these nonequilibrium alloys were investigated and compared.

Wang, R.↗
NASA NTRS1994

Review of numerical procedures for computational surface thermochemistry

Models and equations for surface thermochemistry and near-surface thermophysics of aerodynamically heated thermal protection materials are reviewed, with particular emphasis on computational boundary conditions for surface mass and energy transfer. The surface energy and mass balances, coupled with an appropriate ablation or surface catalysis model, provide complete thermochemical boundary conditions for a true multidisciplinary solution of the fully coupled fluid-dynamics/solid mechanics problem. Practical approximate solutions can be obtained by using a detailed model with full thermophysics for either the solid or fluid phase and a semianalytic method for the other half of the problem. A significant increase in the state-of-the-art in aerothermal computational fluid dynamics is possible by uniting computational fluid dynamic (CFD) methodology with surface thermochemistry boundary conditions and the heat-balance-integral method.

SOLID MECHANICS↗
DOE OSTI2024

Fundamental Thermodynamic, Kinetic, and Mechanical Properties of Lithium and Its Alloys

Lithium alloying reactions are beneficial in promoting uniform plating and stripping of lithium metal in all-solid-state batteries. First-principles calculations are performed to predict thermodynamic, kinetic, and mechanical properties of lithium and several important Li–M alloys (M = Mg, Ag, Zn, Al, Ga, In, Sn, Sb, and Bi). While the Li–Mg binary system forms a solid solution, most other lithium–metal alloys prefer stoichiometric intermetallic compounds with common local motifs that enable fast Li diffusion. Lithium and Li-rich alloys exhibit an unusually flat energy landscape along paths that connect BCC to close-packed structures like FCC and HCP, with important implications for mechanical properties. Very low migration barriers for Li diffusion that rival those of superion conductors are predicted, both in pure Li and in Li–M intermetallics. However, vacancy concentration, which is crucial for substitutional diffusion, is predicted to be low in metallic Li and most Li–M intermetallics. Compounds such as B32 LiAl and LiGa as well as D0 3 Li 3 Sb and Li 3 Bi exhibit structural vacancies at higher ends of their voltage windows, which together with low migration barriers leads to exceptionally high Li mobilities. In the Li–Mg solid solution, the addition of Mg is found to decrease the vacancy tracer diffusion coefficient by an order of magnitude.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural Changes and Reversibility Upon Deintercalation of Li from LiCoPO 4 Derivatives

In an effort to improve the cycle life and rate capability of olivine LiCoPO 4 , Cr, Fe, and Si were added to produce nominal Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 . This cathode material has an energy density comparable to LiCoPO 4 , with markedly improved electrochemical performance. Here, we apply operando X-ray diffraction to gain an understanding of the crystallographic delithiation mechanism of this new substituted electrode material, compared to both LiCo 0.75 Fe 0.25 PO 4 and LiCo 0.75 Fe 0.25 PO 4 . Throughout charging, the extent of solid-solution domains was significantly increased in Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 and LiCo 0.75 Fe 0.25 PO 4 compared to LiCoPO 4 . These domains reduce the mechanical strain during electrode function, providing a clear explanation for the high durability with Co substitution. Li 1.025 Co 0.84 Fe 0.10 Cr 0.05 Si 0.01 (PO 4 ) 1.025 operated at notably higher average potential than LiCo 0.75 Fe 0.25 PO 4 , which would increase the energy density of the cell. Ex situ measurements reveal the persistence of structural irreversibilities in the substituted phase after the first cycle, identifying avenues for further improvement in durability. Overall, this finding sheds light on the strategies for judicious cation substitution in LiCoPO 4 electrodes to maximize the cycle life while preserving high energy density, especially compared to LiFePO 4 .

25 ENERGY STORAGE↗
DOE OSTI2024

Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys

Microstructure refinement and optimized alloying can improve metallic alloy performance: stable nanocrystalline (NC) alloys with immiscible second phases, e.g., Cu-Ta, are stronger than unstable NC alloys and their coarse-grained (CG) counterparts, but higher melting point matrices are needed. Hypoeutectic, CG Ni-Y-Zr alloys were produced via arc-melting to explore their potential as high-performance materials. Microstructures were studied to determine phases present, local composition and length scales, while heat treatments allowed investigating microstructural stability. Alloys had a stable, hierarchical microstructure with ~250 nm ultrafine eutectic, ~10 µm dendritic arm spacing and ~1 mm grain size. Hardness and uniaxial compression tests revealed that mechanical properties of Ni-0.5Y-1.8Zr (in wt%) were comparable to Inconel 617 despite the small alloying additions, due to its hierarchical microstructure. Here, uniaxial compression at 600 °C showed that ternary alloys outperformed Ni-Zr and Ni-Y binary alloys in flow stress and hardening rates, which indicates that the Ni 17 Y 2 phase was an effective reinforcement for the eutectic, which supplemented the matrix hardening due to increased solubility of Zr. Results suggest that ternary Ni-Y-Zr alloys hold significant promise for high temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A contorted nanographene shelter

Nanographenes have kindled considerable interest in the fields of materials science and supramolecular chemistry as a result of their unique self-assembling and optoelectronic properties. Encapsulating the contorted nanographenes inside artificial receptors, however, remains challenging. Herein, we report the design and synthesis of a trigonal prismatic hexacationic cage, which has a large cavity and adopts a relatively flexible conformation. It serves as a receptor, not only for planar coronene, but also for contorted nanographene derivatives with diameters of approximately 15 Å and thicknesses of 7 Å. A comprehensive investigation of the host-guest interactions in the solid, solution and gaseous states by experimentation and theoretical calculations reveals collectively an induced-fit binding mechanism with high binding affinities between the cage and the nanographenes. Notably, the photostability of the nanographenes is improved significantly by the ultrafast deactivation of their excited states within the cage. Encapsulating the contorted nanographenes inside the cage provides a noncovalent strategy for regulating their photoreactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of Precipitation-Strengthened Al 0.8 NbTiVM (M = Co, Ni) Light-Weight Refractory High-Entropy Alloys

Single-phase solid-solution refractory high-entropy alloys (RHEAs) have been receiving significant attention due to their excellent mechanical properties and phase stability at elevated temperatures. Recently, many studies have been reported regarding the precipitation-enhanced alloy design strategy to further improve the mechanical properties of RHEAs at elevated temperatures. In this study, we attempted to develop precipitation-hardened light-weight RHEAs via addition of Ni or Co into Al 0.8 NbTiV HEA. The added elements were selected due to their smaller atomic radius and larger mixing enthalpy, which is known to stimulate the formation of precipitates. The addition of the Ni or Co leads to the formation of the sigma precipitates with homogeneous distribution. The formation and homogeneous distribution of sigma particles plays a critical role in improvement of yield strength. Furthermore, the Al 0.8 NbTiVM 0.2 (M = Co, Ni) HEAs show excellent specific yield strength compared to single-phase AlNbTiV and NbTiVZr RHEA alloys and conventional Ni-based superalloy (Inconel 718) at elevated temperatures.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Solid state processing for high temperature alloys and composites

A variety of solid state powder processing methods have been examined for their potential to produce high temperature materials. These techniques included solid state diffusion, mechanical alloying, reaction milling, and exothermic reactions. While both mechanical alloying and exothermic reactions are capable of producing high temperature composites in addition to yielding solid solution and precipitation hardened alloys, reaction milling can only be used to make composite materials. Although at present this method has only been applied to make carbide strengthened Al, recent work indicates that reaction milling is capable of yielding high strength NiAl-AlN composites.

Whittenberger, J. Daniel↗
DOE OSTI2023

The Linkage Between Electro-Chemical Mechanical Instabilities in Battery Materials

Battery chemistry must be diversified to achieve a sustainable energy landscape by effectively utilizing renewable energy sources. Alkali metal-ion, all-solid-state, metal–air batteries, and multivalent batteries offer unique cost, safety, raw material abundance, energy, and power density solutions. However, realizing these “beyond Li-ion batteries” must uncover their working principles and performance & property relationships. In this aspect, mitigating chemo-mechanical instabilities in the structure and surface of the electrodes plays a crucial role in their performance. Unfortunately, the coupling between electrochemical and mechanical interactions is often poorly understood due to a lack of operando characterization. Here, this review article explains the working principles of curvature measurement and digital image correlation for measuring stress and strain generations in battery materials. We provided specific examples of how these operando mechanical measurements shed light on instabilities in alkali metal ion electrodes, solid electrolytes, Li-O 2 batteries, and aqueous Zn-ion batteries. Operando mechanical measurements offer an effective way to map changes in the physical fingerprint of the battery materials, therefore providing crucial information to elucidate instabilities in battery materials.

25 ENERGY STORAGE↗
NASA NTRS1999

1300 K Creep Behavior of [001] Oriented Ni-49Al-1Hf (at.%) Single Crystals

A study of the 1300 K compressive and tensile creep properties of [001]-oriented NiAl-1Hf (D209) single crystals has been undertaken. Neither post homogenization cooling treatment, minor chemical variations within an ingot or from ingot-to-ingot, nor testing procedure had a significant effect on mechanical behavior; however a heat treatment which dissolved the initial G-phase precipitates and promoted formation of Heusler particles led to a strength reduction. Little primary creep was found utilizing direct measurement of strain, and a misorientation of 18 deg from the [001] did not reduce the creep strength. The effects of heat treatments on properties and a comparison of the flow stress-strain rate data to those predicted by the Jaswon-Cottrell solid solution hardening model indicate that the 1300 K strength in NiAl-1Hf single crystals is mainly due to precipitation hardening mechanisms.

Whittenberger, J. Daniel↗
DOE OSTI2026

Identifying Bounds of Inorganic Content in Solventless Processing of Hybrid Solid Electrolytes

Solid-state lithium batteries require safe, robust electrolytes to enable higher energy densities and improved safety over conventional cells. Hybrid polymer–ceramic electrolytes are a promising solution, combining the processability of polymers with the high ionic conductivity and mechanical strength of inorganic fillers. In this work, we demonstrate a solventless, UV-curing method to produce hybrid solid electrolytes using a poly(ethylene glycol) dimethyl ether (PEGDME)-based photocurable matrix incorporating Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) or Li 7 La 3 Zr 2 O 12 (LLZO) ceramic electrolyte. Inorganic filler loadings up to ∼55 wt.% could be successfully incorporated via this process which was the highest inorganic content at which the slurry remains processable and cured into a uniform film. The resulting UV-cured composite electrolytes remain flexible and exhibit room-temperature ionic conductivities on the order of 10 −4 S·cm −1 , along with notably improved lithium-ion transference numbers compared to conventional polymer electrolytes. Similar performance and processing limits were observed for both LAGP and LLZO, indicating that ceramic filler chemistry does not significantly affect the UV-curing process or the electrolyte's ion transport properties in this regime. Eliminating solvents from fabrication not only simplifies processing and mitigates environmental concerns but also enables higher solid contents that enhance mechanical strength and help suppress lithium dendrite formation. In conclusion, this scalable approach thus paves the way for manufacturing robust composite solid electrolytes for next-generation solid-state batteries (SSBs).

Batteries↗
DOE OSTI2023

Identifying impacts of process, precursors, and defects in metal halide perovskite solar cells

With efficiencies of halide perovskite solar cells stagnating over the last few years at values above 25% and approaching thermodynamic limits, focus must shift to ensuring stability of these devices over the long term. The overarching goal of this project was to understand the root causes of instability in halide perovskite solar cells. Our approach was rooted in fundamental scientific pursuits, determining at the molecular level those processes responsible for degradation of the metal halide perovskite system, either in the precursor ink, or in the solid state. We then used this understanding to show that degradation leads to midgap states in halide perovskite semiconductors, explaining loss in performance; also, this in-depth understanding allowed us to develop specifically targeted solutions to prevent these degradation mechanisms. These include guidance about amines in perovskite inks, solvents to use (and not to use), and impacts of Cs incorporation to perovskite inks and solids. Finally, we achieved our end-of-project goal and demonstrated an effective lifetime of a halide perovskite solar cell of 5000 h, including measurement of devices over 3000 h, amongst the longest in the field. Overall, this project has considerably pushed forward the science of perovskite degradation and sets examples and groundwork for future studies to enable halide perovskite solar cells to be a successful solar energy conversion technology.

14 SOLAR ENERGY↗
DOE OSTI2025

Shining light on nanoscale ‘vine-on-stick’ eutectic structures in the Al-Ce-Ni system

Multiphase eutectics often comprise entangled solid phases with nanoscale periodicity, making it difficult to unravel their 3D connectivity using conventional 2D techniques. Among such systems, the three-phase eutectic Al-Al 11 Ce 3 -Al 3 Ni stands out for its ultrafine (∼100 nm) interphase spacing and promising creep resistance, yet its microstructure remains relatively unexplored despite its potential for high-temperature applications. Here, we use scanning hard X-ray microscopy with an unprecedented ∼10 nm pixel size to resolve its 3D morphology. Reconstructions reveal a novel “vine-on-stick” motif, wherein Al 11 Ce 3 wraps around Al 3 Ni pillars. Analysis of phase tortuosities confirms that Al 11 Ce 3 exhibits more convoluted morphologies than Al 3 Ni. No orientation relationship was observed between the two intermetallics, suggesting that growth is controlled by local solute gradients rather than epitaxy. Fragmentation of intermetallics along their longitudinal axis suggests a Rayleigh-type breakup mechanism in solid state. The “vine-on-stick” pattern may generalize to other alloy systems with variable interfacial anisotropies and low mutual solubilities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rehydration of metastudtite in the alteration kinetics of α– and β–U 3 O 8 in dilute aqueous solutions of hydrogen peroxide

The formation of alteration phases on uranium ore concentrates and used nuclear fuels under oxidizing conditions is key to understanding the potential mobility of radionuclides in the environment and designing optimal storage conditions of materials. However, the time-dependent distribution of alteration phases on α– and β–U 3 O 8 under oxidizing conditions has yet to be explored. Here, in this study, crystalline powders of α– and β–U 3 O 8 were submerged in aqueous solutions of hydrogen peroxide (1.6 × 10 −1 to 5.4 × 10 −5 M) with aliquots of solution and solid removed for analysis at 1, 8, 15, 22, 29, 36, 46, 58, 71, and 83 days. Within one day there is significant alteration of U 3 O 8 to the uranyl peroxide metastudtite, [(UO 2 )(O 2 )(H 2 O) 2 ], that is replaced by studtite, [(UO 2 )(O 2 )(H 2 O) 2 ]·2H 2 O, within a week regardless of the polymorph of U 3 O 8 or the initial concentration of H 2 O 2 in solution, as determined by partial least squares regression (PLSR) of Raman spectra collected from the solids. A dissolution/reprecipitation mechanism is proposed for both the alteration of U 3 O 8 to metastudtite and the subsequent alteration of both U 3 O 8 and metastudtite to studtite. The two polymorphs of U 3 O 8 exhibit similar rates and extents of alteration over time. The rehydration of metastudtite to studtite has not been previously reported and highlights the need for future work to determine the mechanism by which metastudtite is converted to studtite and what other conditions facilitate this rehydration.

Alteration of U3O8↗