Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “soil depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Evaluation of High Mountain Asia-Land Data Assimilation System (version 1) from 2003 to 2016: 2. The impact of assimilating satellite-based snow cover and freeze/thaw observations into a land surface model

This second paper of the two-part series focuses on demonstrating the impact of assimilating satellite-based snow cover and freeze/thaw observations into the hyper-resolution, offline terrestrial modeling system used for the High Mountain Asia (HMA) region from 2003 to 2016. To this end, this study systematically evaluates a total of six sets of 0.01° (∼1 km) model simulations forced by different precipitation forcings, with and without the dual assimilation scheme enabled, at point-scale, basin-scale, and domain-scale. The key variables of interest include surface net shortwave radiation, surface net longwave radiation, skin temperature, near-surface soil temperature, snow depth, snow water equivalent (SWE), and total runoff. First, the point-scale assessment is mainly conducted via evaluating against ground-based measurements. In general, the assimilation enabled estimates are better than no-assimilation counterparts. Second, the basin-scale runoff assessment demonstrates that across three snow-dominated basins, the assimilation enabled experiment yields systematic improvements in all goodness-of-fit statistics through mitigating the negative effects brought by the fixed long-term precipitation correction factors. For example, when forced by the bias-corrected precipitation, the assimilation-enabled experiment improves the bias by 69%, the root-mean-squared error by 30%, and the unbiased root-mean-squared error by 18% (relative to the no-assimilation counterpart). Finally, the domainscale assessment is conducted via evaluating against satellite-based SWE and skin temperature products. Both sets of domain-scale analysis further corroborate the findings in the point-scale evaluations. Overall, this study suggests the benefits of the proposed multi-variate assimilation system in improving the cryospherichydrological process within a land surface model for use in HMA.

Yuan Xue↗

Evaluation of High Mountain Asia-Land Data Assimilation System (version 1) from 2003 to 2016: 2. The impact of assimilating satellite-based snow cover and freeze/thaw observations into a land surface model

This second paper of the two-part series focuses on demonstrating the impact of assimilating satellite-based snow cover and freeze/thaw observations into the hyper-resolution, offline terrestrial modeling system used for the High Mountain Asia (HMA) region from 2003 to 2016. To this end, this study systematically evaluates a total of six sets of 0.01° (∼1 km) model simulations forced by different precipitation forcings, with and without the dual assimilation scheme enabled, at point-scale, basin-scale, and domain-scale. The key variables of interest include surface net shortwave radiation, surface net longwave radiation, skin temperature, near-surface soil temperature, snow depth, snow water equivalent (SWE), and total runoff. First, the point-scale assessment is mainly conducted via evaluating against ground-based measurements. In general, the assimilation enabled estimates are better than no-assimilation counterparts. Second, the basin-scale runoff assessment demonstrates that across three snow-dominated basins, the assimilation enabled experiment yields systematic improvements in all goodness-of-fit statistics through mitigating the negative effects brought by the fixed long-term precipitation correction factors. For example, when forced by the bias-corrected precipitation, the assimilation-enabled experiment improves the bias by 69%, the root-mean-squared error by 30%, and the unbiased root-mean-squared error by 18% (relative to the no-assimilation counterpart). Finally, the domain-scale assessment is conducted via evaluating against satellite-based SWE and skin temperature products. Both sets of domain-scale analysis further corroborate the findings in the point-scale evaluations. Overall, this study suggests the benefits of the proposed multi-variate assimilation system in improving the cryospheric-hydrological process within a land surface model for use in HMA.

Yuan Xue↗

Robustness of Vegetation Optical Depth Retrievals Based on L-Band Global Radiometry

Microwave vegetation optical depth (VOD) and soil moisture (SM) can be simultaneously retrieved based on L-band radiometry with polarization information. VOD is indicative of the vegetation water content (VWC) because it captures the extinction of land surface emission. If the connectivity of VOD to VWC is robust, the pair of VWC-SM observations can be viable bases for understanding soil–plant–atmosphere water relations, providing new perspectives on ecosystem science. Simultaneous SM–VOD retrievals are feasible by inverting the τ−ω model with two independent datasets in dual-channel algorithms. However, given correlated satellite vertical and horizontal brightness temperatures (TBs; TB v and TB h ), an ill-posed inverse problem arises where TB errors result in high uncertainties of retrievals. In this study, we apply the degrees-of-information (DoI) metric and propose a signal-to-noise ratio (SNR) metric to assess the “retrievability” of VOD given the Soil Moisture Active Passive (SMAP) TB v –TB h linear dependence. The application of these metrics allows determining where the VOD retrievals are robust and reliable. This is a necessary step in supporting the applications of VOD in ecology and hydrology. Results show that regions with mainly nonwoody vegetation have the best potential for VOD retrievals, though regularization is necessary. We then assess VOD time variations from two regularization products that reduce the impact of underdetermined inversions: the L3 dual-channel algorithm (L3-DCA) and the multitemporal dual-channel algorithm (MTDCA), which constrain VOD time dynamics with and without using a priori VOD climatology, respectively. Though they both reduce noise, especially in the VOD retrievals, they result in differences in VOD seasonal amplitude and coupling to SM at high frequencies as we outline here.

Microwave↗

Optimal spatial sampling techniques for ground truth data in microwave remote sensing of soil moisture

The paper examines optimal sampling techniques for obtaining accurate spatial averages of soil moisture, at various depths and for cell sizes in the range 2.5-40 acres, with a minimum number of samples. Both simple random sampling and stratified sampling procedures are used to reach a set of recommended sample sizes for each depth and for each cell size. Major conclusions from statistical sampling test results are that (1) the number of samples required decreases with increasing depth; (2) when the total number of samples cannot be prespecified or the moisture in only one single layer is of interest, then a simple random sample procedure should be used which is based on the observed mean and SD for data from a single field; (3) when the total number of samples can be prespecified and the objective is to measure the soil moisture profile with depth, then stratified random sampling based on optimal allocation should be used; and (4) decreasing the sensor resolution cell size leads to fairly large decreases in samples sizes with stratified sampling procedures, whereas only a moderate decrease is obtained in simple random sampling procedures.

Rao, R. G. S.↗

Shallow Soil Polychlorinated Biphenyl Site Assessment Report

This report presents a summary of the shallow soil polychlorinated biphenyl (PCB) site assessment activities that occurred from December 2020 through July 2022 at General Services Administration Reclamation Yard, Solid Waste Management Unit (SWMU) 010, located at the John F. Kennedy Space Center (KSC), Florida. The site is monitored under KSC’s Resource Conservation and Recovery Act Corrective Action Program, which also meets the requirements of Chapter 62-780, Florida Administrative Code. For the purposes of this report, three separate shallow soil plumes, known as the Northeast Shallow Soil PCB Plume, Southeast Shallow Soil PCB Plume, and West Shallow Soil PCB Plume, were identified for this site. The activities presented in this report include seven field events conducted between December 2020 and July 2022, which include shallow soil sample collection in the Northeast, Southeast, and West Shallow Soil PCB Plumes. AECOM Technical Services, Inc., personnel collected 330 soil samples from 118 boring locations. The samples were collected at 0.5-foot depth intervals to various depths based on analytical results and depth to groundwater. The soil samples were submitted to a fixed-based laboratory for analysis by United States Environmental Protection Agency Method 8082A for total PCBs. Several soil samples had PCB concentrations above the State of Florida Direct Exposure Residential and Industrial Soil Cleanup Target Levels (SCTLs), and two soil samples had PCB concentrations above the State of Florida Leachability for Groundwater. No soil borings were located beneath impervious surfaces, such as concrete or asphalt. The current Land Use Control Implementation Plan (LUCIP) covers PCBs in soils above the residential SCTL, which includes the paved areas.

PCBs↗

Shallow Soil Polychlorinated Biphenyl Site Assessment Report: General Services Administration Reclamation Yard Solid Waste Management Unit 010

This report presents a summary of the shallow soil polychlorinated biphenyl (PCB) site assessment activities that occurred from December 2020 through July 2022 at General Services Administration Reclamation Yard, Solid Waste Management Unit (SWMU) 010, located at the John F. Kennedy Space Center (KSC), Florida. The site is monitored under KSC’s Resource Conservation and Recovery Act Corrective Action Program, which also meets the requirements of Chapter 62-780, Florida Administrative Code. For the purposes of this report, three separate shallow soil plumes, known as the Northeast Shallow Soil PCB Plume, Southeast Shallow Soil PCB Plume, and West Shallow Soil PCB Plume, were identified for this site. The activities presented in this report include seven field events conducted between December 2020 and July 2022, which include shallow soil sample collection in the Northeast, Southeast, and West Shallow Soil PCB Plumes. AECOM Technical Services, Inc., personnel collected 330 soil samples from 118 boring locations. The samples were collected at 0.5-foot depth intervals to various depths based on analytical results and depth to groundwater. The soil samples were submitted to a fixed-based laboratory for analysis by United States Environmental Protection Agency Method 8082A for total PCBs. Several soil samples had PCB concentrations above the State of Florida Direct Exposure Residential and Industrial Soil Cleanup Target Levels (SCTLs), and two soil samples had PCB concentrations above the State of Florida Leachability for Groundwater. No soil borings were located beneath impervious surfaces, such as concrete or asphalt. The current Land Use Control Implementation Plan (LUCIP) covers PCBs in soils above the residential SCTL, which includes the paved areas.

soil assessment↗

A model of the CO2 exchanges between biosphere and atmosphere in the tundra

A physical model of the soil thermal regime in a permafrost terrain has been developed and validated with soil temperature measurements at Barrow, Alaska. The model calculates daily soil temperatures as a function of depth and average moisture contents of the organic and mineral layers using a set of five climatic variables, i.e., air temperature, precipitation, cloudiness, wind speed, and relative humidity. The model is not only designed to study the impact of climate change on the soil temperature and moisture regime, but also to provide the input to a decomposition and net primary production model. In this context, it is well known that CO2 exchanges between the terrestrial biosphere and the atmosphere are driven by soil temperature through decomposition of soil organic matter and root respiration. However, in tundra ecosystems, net CO2 exchange is extremely sensitive to soil moisture content; therefore it is necessary to predict variations in soil moisture in order to assess the impact of climate change on carbon fluxes. To this end, the present model includes the representation of the soil moisture response to changes in climatic conditions. The results presented in the foregoing demonstrate that large errors in soil temperature and permafrost depth estimates arise from neglecting the dependence of the soil thermal regime on soil moisture contents. Permafrost terrain is an example of a situation where soil moisture and temperature are particularly interrelated: drainage conditions improve when the depth of the permafrost increases; a decrease in soil moisture content leads to a decrease in the latent heat required for the phase transition so that the heat penetrates faster and deeper, and the maximum depth of thaw increases; and as excepted, soil thermal coefficients increase with moisture.

Labgaa, Rachid R.↗

Completing below-ground carbon budgets for pastures, recovering forests, and mature forests of Amazonia

This progress report covers the following efforts initiated for the year: year-round monthly soil CO2 flux measurements were started in both primary and secondary forests and in managed and degraded pastures; root sorting and weighing has begun and all four ecosystems at Paragominas have been analyzed through samples; regional modeling of soil water dynamics and minimum rooting depth has been done and the RADAMBRASIL soils database has been digitized and a 20 year record of the precipitation for the region has been produced, along with a hydrological ('bucket-tipping') model that will run within a GIS framework; prototype tension lysimeters have been designed and installed in soil pits to begin assessing the importance of DOC as a source of organic matter in deep soils; and many publications, listed in this document, have resulted from this year's research. Two of the papers published are included with this annual report document.

Davidson, Eric A.↗

The 2019-2020 Australian drought and bushfires altered the partitioning of hydrological fluxes

Though coarse in spatial resolution, the nearly all weather measurements from passive microwave sensors can help in improving the spatiotemporal coverage of optical and thermal infrared sensors for monitoring vegetation changes on the land surface. This study demonstrates the use of vegetation optical depth retrievals from the Soil Moisture Active Passive mission for capturing the vegetation alterations from the recent 2019-2020 Australian bushfires and drought. The impact of vegetation disturbance s on terrestrial water budget is examined by assimilating the vegetation optical depth retrievals into a dynamic phenology model. The results demonstrate that assimilating vegetation optical depth observations lead to improved simulation of evapotranspiration, runoff, and soil moisture states. The study also demonstrates that the vegetation changes from the 2019-2020 Australian drought and fires led to significant modifications in the partitioning of evaporative and runoff fluxes, resulting in increased bare soil evaporation, reduced transpiration, and higher runoff.

data assimilation↗

Soil moisture applications of the heat capacity mapping mission

Results are presented of ground, aircraft and satellite investigations conducted to evaluate the potential of the Heat Capacity Mapping Mission (HCMM) to monitor soil moisture and the depth of shallow ground water. The investigations were carried out over eastern South Dakota to evaluate the relation between directly measured soil temperatures and water content at various stages of canopy development, aircraft thermal scanner measurements of apparent canopy temperature and the reliability of actual HCMM data. The results demonstrate the possibility of evaluating soil moisture on the basis of HCMM apparent canopy temperature and day-night soil temperature difference measurements. Limitations on the use of thermal data posed by environmental factors which influence energy balance interactions, including phase transformations, wind patterns, topographic variations and atmospheric constituents are pointed out.

Heilman, J. L.↗

Comparing soil boundaries delineated by digital analysis of multispectral scanner data from high and low spatial resolution systems

The author has identified the following significant results. Computer-aided analysis techniques used with aircraft MSS data showed that the spatial resolution was sufficient to recognize each soil mapping unit of the test site. Some difficulties occurred where different soil series were intricately mixed, and this mixture showed as a separate spectral mapping unit, or where the difference between two soils depended on the depth of silty surface material. Analysis of LANDSAT data with computer-aided techniques showed that it was not possible to find spectrally homogeneous soil features of the seven soil series on the 40 ha test site on the digital display or on a picture print map. Cluster techniques could be used on an extended test area to group spectrally similar data points into cluster classes.

Kristof, S. J.↗

Data documentation for the bare soil experiment at the University of Arkansas, June - August 1980

The primary objective of this study is to evaluate the relationships between soil moisture and reflectivity of a bare soil, using microwave techniques. A drainage experiment was conducted on a Captina silt loam in cooperation with personnel in the Electrical Engineering Department. Measurements included soil moisture pressures at various depths, neutron probe measurements, gravimetric moisture samples, and reflectivity of the soil surface at selected frequencies including 1.5 and 6.0 GHz and at the incident angle of 45 deg. All measurements were made in conjuction with that of reflectivity data.

Sadeghi, A. M.↗

Initial Validation of a Gas-Granular Flow Solver Using a Subscale, Reduced Pressure Plume Surface Interaction Ground Test

With NASA’s goal to land the next humans on the lunar surface in the next few years, it is vitally important to have a better understanding of the plume surface interaction (PSI) between the landing vehicles and the lunar regolith. The Fluid Dynamics Branch at NASA/MSFC has previously used the gas-granular flow solver Loci/GGFS to qualitatively predict crater formation due to PSI effects in a lunar (near vacuum) ambient environment. In this paper, validation of Loci/GGFS crater width and depth predictions in ambient near-lunar conditions are provided using experimental data collected at MSFC during the Physics-Focused Ground Test 1 (PFGT-1) campaign in 2022. To observe sensitivity to soil models, simulations were conducted with both monodisperse glass bead (MGB) and BP-1 lunar regolith simulant soil models in Loci/GGFS. Crater depth and width comparisons are made with PFGT-1 Run 56, which used BP-1 soil. The Loci/GGFS BP-1 soil model performed slightly better with a mean predicted crater depth within 10% of the experiment. Both soil models predicted crater width within 10%. Cratering occurred more quickly with the MGB soil model. Mesh and spatial order sensitivity are also examined for the BP-1 soil model.

Validation↗

Composition and Maturity of Apollo 16 Regolith Core 60013/14

Samples from every half-centimeter dissection interval of double drive tube 60013/14 (sections 60013 and 60014) were analyzed by magnetic techniques for Fe concentration and surface maturity parameter I(sub s)/ Fe(O), and by neutron activation for concentrations of 25 lithophile and siderophile elements. Core 60013/14 is one of three regolith cores taken in a triangular array 40-50 m apart on the Cayley plains during Apollo 16 mission to the Moon. The core can be divided into three zones based both on I(sub s)/FeO and composition. Unit A (0-44 cm depth) is compositionally similar to other soils from the surface of the central region of the site and is mature throughout, although maturity decreases with depth. Unit B (44-59 cm) is submature and compositionally more feldspathic than Unit A. Regions of lowest maturity in Unit B are characterized by lower Sm/Sc ratios than any soil obtained from the Cayley plains as a result of some unidentified lithologic component with low surface maturity. The component is probably some type of mafic anorthosite that does not occur in such high abundance in any of the other returned soils. Unit C (59-62 cm) is more mature than Unit B and compositionally equivalent to an 87: 13 mixture of soil such as that from Unit A and plagioclase such as found in ferroan anorthosite. Similar soils, but containing greater abundances of anorthosite (plagioclase), are found at depth in the other two cores of the array. These units of immature to submature soil enriched to varying degrees (compared to the mature surface soil) in ferroan anorthosite consisting of approx. 99% plagioclase are the only compositionally distinct subsurface similarities among the three cores. Each of the cores contains other units that are compositionally dissimilar to any soil unit in the other two cores. These compositionally distinct units probably derive from local subsurface blocks deposited by the event(s) that formed the Cayley plains. The ferroan anorthosite with approx. 99% plagioclase, however, must represent some subsurface lithology that is significant on the scale of tens of meters. The compositional uniformity of the surface soil (0-10 cm depth) over distances of kilometers reflects the large-scale uniformity of the plains deposits; the fine- structure reflects small-scale nonuniformity and the inefficiency of the impact-mixing process at depths as shallow as even one meter.

Korotev, Randy T.↗

The Apennine Front core 15007/8 - Irradiational and depositional history

The Apennine Front core 15007/8 was subjected to ferromagnetic resonance (FMR), magnetic and noble gas measurements. Ferromagnetic resonance intensity I(s)/FeO surface exposure (maturity) index values and FeO concentrations are reported for 0.5 cm depth intervals, and noble gas and FMR data are given for 13 soils and two clasts selected from various depths in the 57 cm-long core. These data indicate four core units whose contacts are at about 18, 49 and 55 cm. The 0-18 cm unit has cosmogenic Xe-131/Xe-126 values that are higher than underlying soil and indicate irradiation at depths greater than 50 cm, showing it to probably be the ejecta from the crater on whose rim the core was collected. The 18-49 cm unit has relatively constant I(s)/FeO values and cosmogenic gas abundances, and may represent a mixed soil zone. I(s)/FeO drops by 30 units at the 49-cm contact. Comparison of the 15007/8 core to other ones suggests that soils on slopes tend to be mixed and to not contain units with long in situ radiation profiles.

Bogard, D. D.↗

A Coupled Soil-Atmosphere Model of H2O2 on Mars

The Viking Gas Chromatograph Mass Spectrometer failed to detect organic compounds on Mars, and both the Viking Labeled Release and the Viking Gas Exchange experiments indicated a reactive soil surface. These results have led to the widespread belief that there are oxidants in the martian soil. Since H2O2 is produced by photochemical processes in the atmosphere of Mars, and has been shown in the laboratory to reproduce closely the Viking LR results, it is a likely candidate for a martian soil oxidant. Here, we report on the results of a coupled soil/atmosphere transport model for H202 on Mars. Upon diffusing into the soil, its concentration is determined by the extent to which it is adsorbed and by the rate at which it is catalytically destroyed. An analytical model for calculating the distribution of H202 in the martian atmosphere and soil is developed. The concentration of H202 in the soil is shown to go to zero at a finite depth, a consequence of the nonlinear soil diffusion equation. The model is parameterized in terms of an unknown quantity, the lifetime of H202 against heterogeneous catalytic destruction in the soil. Calculated concentrations are compared with a H202 concentration of 30 nmoles/cu cm, inferred from the Viking Labeled Release experiment. A significant result of this model is that for a wide range of H202 lifetimes (up to 105 years), the extinction depth was found to be less than 3 m. The maximum possible concentration in the top 4 cm is calculated to be approx. 240 nmoles/cu cm, achieved with lifetimes of greater than 1000 years. Concentrations higher than 30 nmoles/cu cm require lifetimes of greater than 4.3 terrestrial years. For a wide range of H202 lifetimes, it was found that the atmospheric concentration is only weakly coupled with soil loss processes. Losses to the soil become significant only when lifetimes are less than a few hours. If there are depths below which H202 is not transported, it is plausible that organic compounds, protected from an oxidizing environment, may still exist. They would have been deposited by meteors, or be the organic remains of past life.

Bullock, Mark A.↗

Analysis of the Smap Roughness Parameter and the Smap Vegetation Optical Depth

The SMAP product provides the soil moisture (SM) computed using three different retrieval algorithms: the single channel H and V algorithms (SCA-H and SCA-V), and the dual-channel algorithm (DCA) which in addition provides the vegetation optical depth (VOD). The roughness model and the roughness parameters play an important role in the determination of the soil moisture and the VOD. In this regard, the SMAP SCA and DCA utilize different approaches to incorporate the effect of roughness. In this work we will summarize those approaches and we will evaluate the effect of the DCA approach on the retrieval of VOD. We will compare the SMAP DCA roughness parameter h with topographic parameters such as DEM height, DEM slope, DEM height standard deviation and DEM slope standard deviation.

Mousavi, M.↗