Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sensible flux”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Net radiation, sensible and latent heat flux densities on slopes computed by the energy balance method

Energy balance components obtained over five grass-covered sloping surfaces near Manhattan, KS, using the Bowen ratio energy balance technique with the instruments mounted horizontally were compared with calculated values when the instruments were mounted parallel to the surfaces. Hourly values of the components changed when the instruments were parallel to the surfaces. The changes were larger at low solar angles (spring and fall) and on steeper slopes. An area average of daylight totals, assuming that all aspects were equally represented, changed only 0.1 percent on June 6 and 2.3 percent on October 11. The calculations, extended to steeper slopes, indicated small changes in the daylight totals for slopes of less than 10 deg.

Fritschen, Leo↗
NASA NTRS1990

Spatial and temporal variations of CO2, sensible and latent heat fluxes over the FIFE site

The temporal and spatial variations of mass and energy exchanges are characterized by data taken from grid flights at a constant pressure altitude. Data from two separate studies are presented to demonstrate that the correlation coefficients increase with improved estimates of the origin of mass and energy exchange. Measurements taken from aircraft can effectively describe relationships between surface processes and vegetation characteristics on a regional scale.

Desjardins, R. L.↗
NASA NTRS1994

A season of heat, water vapor, total hydrocarbon, and ozone fluxes at a subarctic fen

High-latitude environments are thought to play several critical roles in the global balance of radiatively active trace gases. Adequate documentation of the source and sink strengths for trace gases requires long time series of detailed measurements, including heat and moisture budgets. A fen near Schefferville, Quebec, was instrumented during the summer of 1990 for the measurement of the surface energy, radiation, and moisture balances as well as for eddy correlation estimates of ozone and methane flux. Despite the limited fetch at this site, analysis of the tower flux 'footprint' indicates that at least 80% of the flux observed originates from sources within the fen. Sensible heat fluxes averaged 25% of the daytime net radiation at the site, while the latent heat flux, determined from the energy balance, was 63%; the Bowen ratio varied from 0.2 to 0.8 from day to day, without a seasonal trend to the variation. The competing effects of rooted macrophyte development (with concomitant effects on roughness and transpiration) and the normal shift in synoptic pattern around day 200 to warm, dry conditions results in a lack of net seasonal effect on the energy partitioning. Over the period from days 170 to 230, the evaporation (167 mm) was double the rainfall, while the decline in water level was 107 mm, leaving a net runoff of 0.44 mm/d. The total hydrocarbon flux was 75-120 mg m(exp -2)/d, following a diurnal pattern similar to heat or moisture flux, while the daytime ozone flux was about -1.11 x 10(exp 11) molecules cm(exp -2)/s. A period near the end of the experiment, during week 30, produced the strongest total hydrocarbon flux, associated with warmer deep (1 m) soil temperatures, lower fen water levels, and the late summer shift in wind direction at that time. An early summer 'flush' of total hydrocarbon was not observed.

Moore, Kathleen E.↗
NASA NTRS2011

Analysis of Summertime Convective Initiation in Central Alabama Using the Land Information System

During the summer months in the southeastern United States, convective initiation presents a frequent challenge to operational forecasters. Thunderstorm development has traditionally been referred to as random due to their disorganized, sporadic appearance and lack of atmospheric forcing. Horizontal variations in land surface characteristics such as soil moisture, soil type, land and vegetation cover could possibly be a focus mechanism for afternoon convection during the summer months. The NASA Land Information System (LIS) provides a stand-alone land surface modeling framework that incorporates these varying soil and vegetation properties, antecedent precipitation, and atmospheric forcing to represent the soil state at high resolution. The use of LIS as a diagnostic tool may help forecasters to identify boundaries in land surface characteristics that could correlate to favored regions of convection initiation. The NASA Shortterm Prediction Research and Transition (SPoRT) team has been collaborating with the National Weather Service Office in Birmingham, AL to help incorporate LIS products into their operational forecasting methods. This paper highlights selected convective case dates from summer 2009 when synoptic forcing was weak, and identifies any boundaries in land surface characteristics that may have contributed to convective initiation. The LIS output depicts the effects of increased sensible heat flux from urban areas on the development of convection, as well as convection along gradients in land surface characteristics and surface sensible and latent heat fluxes. These features may promote mesoscale circulations and/or feedback processes that can either enhance or inhibit convection. With this output previously unavailable to operational forecasters, LIS provides a new tool to forecasters in order to help eliminate the randomness of summertime convective initiation.

James, Robert S.↗
NASA NTRS1979

A scheme for computing surface fluxes from mean flow observations

A computational method for estimating turbulent surface stress, sensible heat flux, and humidity flux from mean velocity, temperature, and humidity at a single height in the atmospheric surface layer is presented. The method is based on coupling a Monin-Obukhov similarity profile to a 'force-restore' formulation for the evolution of surface soil temperature to yield the local values of shear stress, heat flux, and surface temperature. In addition to reference-level mean flow properties, the parameters required to implement this method are the thermal heat capacity of the soil, the surface aerodynamic roughness, latitude, solar declination, surface albedo, surface emissivity, and atmospheric transmissivity. Sample calculations are presented for (1) constant atmospheric forcing at the reference level, and (2) variable atmospheric forcing corresponding to Kahle's (1977) measurements of windspeed, air temperature, and radiometer soil surface temperature under dry vegetatively sparse conditions in the Mohave Desert, Calif.

Hoffert, M. I.↗
DOE OSTI2023

Merging flux-variance with surface renewal methods in the roughness sublayer and the atmospheric surface layer

In this article, Two micrometeorological methods utilizing high-frequency sampled air temperature were tested against eddy covariance (EC) sensible heat flux (𝐻) measurements at three sites representing agricultural, agro-forestry, and forestry systems. The two methods cover conventional and newly proposed forms of the flux-variance (FV) and surface renewal (SR) schemes of differing complexities. The sites represent measurements in surface, roughness, and roughness to surface transitional layers. Regression analyzes against EC show that the most reliable FV and SR forms estimate 𝐻 with slopes within ±10% from unity and coefficient of determination 𝑅2 > 0.9 across all the three sites. The best performance of both FV and SR was found at the agricultural site with measurements well within the surface layer, while the worst was found for the tall forest with measurements within the roughness sublayer where its thickness needed to be additionally estimated. The main variable driving 𝐻 in FV is the temperature variance, whereas in SR, it is the geometry of ramp-like structures. Since these structures are also responsible for most of the temperature variance, a novel FV-SR approach emerging from combining the methods is proposed and evaluated against EC measurements and conventional FV and SR schemes. The proposed FV-SR approach requiring only a single fast response thermocouple is potentially independent of calibration and ameliorates some of the theoretical objections that arise when combining ramp statistics with similarity arguments. The combination of methods also provides new insights into the contribution of coherent structures to the temperature variance and its dependence on atmospheric stratification. Other potential utility of the new method is to include it in multi-tool assessments of surface energy fluxes, since a convergence or divergence of the results has a high diagnostic value.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Free convection in the Matian atmosphere

The 'free convective' regime for the Martian atmospheric boundary layer (ABL) was investigated. This state occurs when the mean windspeed at the top of the ABL drops below some critical value U(sub c) and positive buoyant forces are present. Such forces can arise either from vertical temperature or water vapor gradients across the atmospheric surface layer. During free convection, buoyant forces drive narrow plumes that ascend to the inversion height with a return circulation consisting of broad slower-moving downdraughts. Horizontal pressure, temperature, windspeed, and water vapor fluctuations resulting form this circulation pattern can be quite large adjacent to the ground (within the surface layer). The local turbulent fluctuations cause non-zero mean surface stresses, sensible heat fluxes, and latent heat fluxes, even when the mean regional windspeed is zero. Although motions above the surface layer are insensitive to the nature of the surface, the sensible and latent heat fluxes are primarily controlled by processes within the interfacial sublayer immediately adjacent to the ground during free convection. Thus the distinction between aerodynamically smooth and rough airflow within the interfacial sublayer is more important than for the more typical situation where the mean regional windspeed is greater than U(sub c). Buoyant forces associated with water vapor gradients are particularly large on Mars at low pressures and high temperatures when the surface relative humidity is 100 percent, enhancing the likelihood of free convection under these conditions. On this basis, Ingersol postulated the evaporative heat losses from an icy surface on Mars at 237 K and current pressures would exceed the available net radiative flux at the surface, thus prohibiting ice from melting at low atmospheric pressures. Schumann has developed equations describing the horizontal fluctuations and mean vertical gradients occurring during free convection. Schumann's model was generalized to include convection driven by water vapor gradients and to include the effects of circulation above both aerodynamically smooth and rough surfaces.

Clow, G. D.↗
NASA NTRS1981

Application of HCMM data to regional geologic analysis for mineral and energy resource evaluation

Experimentation with several potentially promising techniques led to the selection of a fairly simple scheme for registration of data from the HCMM using an affine transformation. A method based solely on remote sensing was developed to estimate those meteorological effects which are required for thermal inertia mapping. It assumes that the atmospheric fluxes are spatially invariant and that the solar, sky and sensible heat fluxes can be approximated by a simple mathematical form. Coefficients are determined from least squares method by fitting observational data to the thermal model.

Watson, K.↗
NASA NTRSDate not supplied

The Land Surface in Earth System Reanalysis

Current global atmospheric reanalysis products such as ERA-5, MERRA-2, and JRA-55 provide estimates of land surface states and fluxes, including soil moisture, soil temperature, snow mass, latent and sensible heat fluxes, and runoff. These land surface estimates are based on land surface process models and, depending on the reanalysis product, on precipitation observations or the assimilation of land surface observations of soil moisture and snow conditions from satellites and in situ networks. The land models used in the current global atmospheric reanalysis systems are generally focused on water and energy balance processes, with prescribed static land cover and prescribed climatological vegetation conditions. That is, current global atmospheric reanalysis products do not reflect changes in land use or land cover, nor do they provide dynamic estimates of the land carbon cycle. These and other gaps, including the omission of anthropogenic processes such as irrigation in the land model, need to be addressed in the development of the next generation Earth system reanalysis systems. This presentation provides an overview of the state-of-the-art and future developments of land surface estimates in global reanalysis systems.

Rolf Reichle↗
NASA NTRSDate not supplied

The Land Surface in Current and Planned MERRA Reanalysis Products

Current global atmospheric reanalysis products such as the European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA5), the NASA Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2), and the Japanese Reanalysis for Three Quarters of a Century (JRA-3Q) provide estimates of land surface states and fluxes, including soil moisture, soil temperature, snow mass, latent and sensible heat fluxes, and runoff, that are widely used in research and applications. These land surface estimates are based on land surface process models and, depending on the reanalysis product, on precipitation observations or the assimilation of land surface observations of soil moisture, soil temperature, snow conditions, and screen-level air temperature and humidity from satellite observations and in situ measurements. In this presentation, we review the land surface modeling and data assimilation components of the suite of current and planned MERRA reanalysis products. In addition to MERRA-2, we will discuss the latest NASA reanalysis, MERRA for the 21st century (M21C), which is currently under production, as well as the development and planning of the next version of the MERRA reanalysis, tentatively labeled MERRA-3. In MERRA-2, observations-based precipitation data products are used to correct the precipitation falling on the land surface. Outside of the high-latitudes and Africa, the daily, 0.5-degree, gauge-based Climate Prediction Center (CPC) Unified (CPCU) product is used. In Africa, the pentad, 2.5-degree, satellite- and gauge-based CPC Merged Analysis of Precipitation (CMAP) product is used. Poleward of 62.5 degrees latitude, the land surface sees the precipitation generated by the atmospheric model in the cycling data assimilation system. This configuration provides improved soil moisture estimates compared to those of the original (version 1) MERRA estimates, which did not benefit from the use of precipitation observations. Moreover, the use of precipitation observations facilitates a seamless spin-up of the land surface initial conditions across the MERRA-2 production streams. The use of a gauge-only precipitation product in MERRA-2 across much of the globe, however, adversely impacts the quality of the MERRA-2 land surface estimates in regions with poor gauge coverage, including most of South America and Australia. Therefore, the forthcoming M21C reanalysis uses satellite- and gauge-based precipitation from the Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement Mission (IMERG). This change results in significant improvements in the quality of the M21C soil moisture estimates in the Southern Hemisphere compared to those from MERRA-2. Planning for MERRA-3 focuses on the assimilation of soil moisture observations from the Soil Moisture Active Passive (SMAP) mission and the Advanced Scatterometer (ASCAT), along with snow cover area fraction observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) to further improve the quality of the land surface estimates from the reanalysis. As a first step towards the assimilation of land surface observations in MERRA-3, the offline (land-only) M21C-Land reanalysis is currently under development as a supplemental M21C product that includes the assimilation of SMAP, ASCAT, and MODIS observations. Preliminary results from M21C and M21C-Land will be discussed in the context of MERRA-2 and plans for MERRA-3.

Rolf Reichle↗
DOE OSTI2022

Dimensionless parameters for cloudy Rayleigh-Bénard convection: Supersaturation, Damköhler, and Nusselt numbers

In steady-state Rayleigh-Bénard convection, heat is transported by turbulent thermal convection from the bottom, hot surface to the top, cold surface, leading to a height-independent sensible heat flux. When water vapor is present and cloud formation occurs, there is also an additional latent heat flux. Heat transport in cloudy Rayleigh-Bénard convection depends on turbulent flow as well as the microphysical state of the clouds: specifically, whether substantial supersaturations exist and whether cloud liquid water is removed through sedimentation/precipitation. In this article we bridge between the Rayleigh-Bénard convection literature and the atmospheric literature. We express the governing equations for cloudy convection in dimensionless form, thereby explicitly identifying the governing parameters relevant to the cloudy case, including Schmidt, Damköhler, supersaturation, and sedimentation numbers. We further connect to the atmospheric literature by obtaining a Nusselt number (dimensionless heat flux) for a cloud-convection system, directly from the conservation equations for temperature and water vapor. This flux has the same form as that identified by Zhang et al. [L. Zhang, K. L. Chong, and K.-Q. Xia, J. Fluid Mech. 874, 1041 (2019)] for convection with water vapor, but is extended to the cloudy case. For equal thermal and water vapor diffusivities, the flux corresponds to the widely used atmospheric quantities equivalent temperature and moist static energy. Using large eddy simulation (LES) of an idealized cloudy Rayleigh-Bénard convection system with fixed boundary conditions, we find that the equivalent heat flux (Nusselt number) is only weakly dependent on the microphysical details of the system, such as liquid water mixing ratio and cloud droplet number concentration. Finally, from the results, we show the vertical profiles of sensible and latent heat fluxes depend on the liquid water content, whereas the equivalent heat flux remains a constant throughout the height of the chamber.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Strong influence of convective heat transfer efficiency on the cooling benefits of green roof irrigation

Abstract By enhancing evapotranspiration (ET), green roofs provide cooling benefits for the urban environment and are recognized as a promising heat mitigation strategy. The evaporative cooling effects of green roofs strongly depend on the soil moisture conditions and thus irrigation may be needed to sustain the cooling benefits. It has been shown that the magnitude of cooling benefits offered by green roof irrigation varies spatially, but its controlling factors remain elusive. In this study, we combine a surface energy balance (SEB) model with global simulations generated by an improved Earth System Model to illustrate the key factors controlling the cooling benefits of green roof irrigation. We employ a simple irrigation scheme, which is only active when there is no ice in soil layers and when the soil moisture is below field capacity. As a result, most of the irrigation water leaves the green roof system via ET. We find that the magnitude and also the spatial variability of the cooling benefits of green roof irrigation are controlled by the irrigation amount, and a surface energy redistribution factor that encodes the efficiencies of different SEB components in transferring heat. Further analysis indicates that the enhancement of latent heat flux due to irrigation is largely balanced by the reduction of sensible heat flux on green roofs. Therefore, the amount of irrigation needed per unit decrease of green roof surface temperature is mainly controlled by the convective heat transfer efficiency. A lower convective heat transfer efficiency (e.g. under a lower wind speed) helps reduce the amount of irrigation needed per unit decrease of green roof surface temperature. This study highlights the importance of SEB in constraining the cooling benefits of green roof irrigation and provides valuable guidance for urban planners and policy makers in terms of heat mitigation and sustainable water management.

Wang, Linying (ORCID:0000000308769220)↗
NASA NTRS1990

A study of the surface energy balance on slopes in a tallgrass prairie

Four slopes (north, south, east, and west) were selected on the Konza Prairie Research Natural Area to study the effect of topography on surface energy balance and other micrometeorological variables. Energy fluxes, air temperature, and vapor pressure were measured on the sloped throughout the 1988 growing season. Net radiation was the highest on the south-facing slope and lowest on the north-facing slope, and the difference was more than 150 W/sq m (20 to 30 percent) at solar noon. For daily averages, the difference was 25 W/sq m (15 percent) early in the season and increased to 60 W/sq m (30 to 50 percent) in September. The east-facing and west-facing slopes had the same daily average net radiation, but the time of day when maximum net radiation occurred was one hour earlier for the east-facing slope and one hour later for the west-facing slope relative to solar noon. Soil heat fluxes were similar for all the slopes. The absolute values of sensible heat flux (h) was consistently lower on the north-facing slope compared with other slopes. Typical difference in the values of H between the north-facing and the south-facing slopes was 15 to 30 W/sq m. The south-facing slope had the greatest day to day fluctuation in latent heat flux as a result of interaction of net radiation, soil moisture, and green leaf area. The north-facing slope had higher air temperatures during the day and higher vapor pressures both during the day and at night when the wind was from the south.

Nie, D.↗
NASA NTRS1992

Surface energy fluxes on four slope sites during FIFE 1988

Four slopes (facing north, south, east, and west) in the Konza Prairie Research Natural Area were selected to study the effect of topography on surface energy balance and other micrometeorological variables. Energy fluxes, air temperature, and vapor pressure were measured on the slopes throughout the 1988 growing season. Net radiation was highest on the south facing slope and lowest on the north facing slope, and the difference was more than 150 W/sq m (20-30 percent) at solar noon. For daily averages the difference was about 25 W/sq m (15 percent) early in the season and increased to about 60 W/sq m (30-50 percent) in September. Soil heat fluxes were similar for all the slopes. The absolute values of sensible heat flux were consistently lower on the north facing slope compared with other slopes. The south facing slope had the greatest day-to-day fluctuation in latent heat flux as a result of the interaction of net radiation, soil moisture, and green leaf area. Differences were found in the partitioning of the available energy among the slopes, and the north facing slope had a higher percentage of energy dissipated into latent heat flux. The north facing slope had higher air temperatures during the day and higher vapor pressures both during the day and at night when the wind was from the south.

Nie, D.↗
NASA NTRS2003

Investigation of Aerodynamic and Aerodynamic and Radiometric Land Surface Temperatures

The overall goal of the project was to reconcile the difference between T(sub s,r) and T(sub aero), while maintaining consistency within models and with theory and data. The project involved collaboration between researchers at Bucknell University, Boston University, University of mode Island, and the USDNARS Hydrology Laboratory. This report focuses on the work done at Bucknell, which used an analytical continuous-source flux model developed by Crago (1998), based on work by Brutsaert and Sugita (1996) to generate fluxes at all levels of the canopy. Named ALARM [Analytical Land- Atmosphere-Radiometer Model] by Suleiman and Crago (2002), the model assumes the foliage has an exponential vertical temperature profile. The same profile is felt by the within-canopy turbulence and 'seen" by a radiometer viewing the surface from any zenith view angle. ALARM converts radiometric surface temperatures taken from any view angle into a clearly-defined version of Taero called the equivalent isothermal surface temperature T(sub s,j), and then calculates the sensible heat flux H using Monin-Obukhov similarity theory. This allows remotely sensed Ts,r measurements to be used to produce high quality sensible and latent heat flux estimates, or to validate or update the surface temperature produced by SVATs in climate or mesoscale models.

Crago, Richard D.↗
NASA NTRS2020

Spatial Heterogeneity in CO2, CH4, and Energy Fluxes: Insights from Airborne Eddy Covariance Measurements Over the Mid-Atlantic Region

The exchange of carbon between the Earth’s atmosphere and biosphere influences the atmospheric abundances of carbon dioxide (CO2) and methane (CH4). Airborne eddy covariance can quantify surface-atmosphere exchange from landscape-to-regional scales, offering a unique perspective on carbon cycle dynamics. We use extensive airborne measurements to quantify fluxes of sensible heat, latent heat, CO2, and CH4across multiple ecosystems in the Mid-Atlantic region during September 2016 and May 2017. In conjunction with footprint analysis and land cover information, we use the airborne dataset to explore the effects of landscape heterogeneity on measured fluxes. Our results demonstrate large variability in CO2 uptake over mixed agricultural and forested sites, with fluxes ranging from -3.4 ± 0.7 to -11.5 ± 1.6μmol m-2s-1 for croplands and -9.1 ± 1.5 to -22.7 ± 3.2μmol m-2s-1for forests. We also report substantial CH4emissions of 32.3 ± 17.0to 76.1 ± 29.4nmol m-2s-1 from a brackish herbaceous wetland and 58.4± 12.0 to 181.2 ± 36.8nmol m-2s-1 from a freshwater forested wetland. Comparison of ecosystem-specific aircraft observations with measurements from eddy covariance flux towers along the flight path demonstrate that towers capture ~30–75% of the regional variability in ecosystem fluxes. Diel patterns measured at the tower sites suggest that peak, midday flux measurements from aircraft accurately predicts net daily CO2exchange. We discuss next steps in applying airborne observations to evaluate bottom-up flux models and improve understanding of the biophysical processes that drive carbon exchange from landscape-to-regional scales.

airborne measurements to quantify fluxes of sensib↗
NASA NTRS1994

Modeling tropical Pacific sea surface temperature with satellite-derived solar radiative forcing

Two independent datasets for the solar radiation at the surface derived from satellites are compared. The data derived from the Earth Radiation Budget Experiment (ERBE) is for the net solar radiation at the surface whereas the International Satellite Cloud Climatology Project (ISCCP) data is for the downward flux only and was corrected with a space- and time-varying albedo. The ISCCP net flux is at all times higher than the ERBE flux. The difference can be divided into an offset that decreases with latitude and another component that correlates with high tropical cloud cover. With this latter exception the two datasets provide spatial patterns of solar flux that are very similar. A tropical Pacific Ocean model is forced with these two datasets and observed climatological winds. The upward heat flux is parameterized taking into account separately the longwave radiative, latent, and sensible heat fluxes. Best fit values for the uncertain parameters are found using an optimization procedure that seeks to minimize the difference between model and observed SST by varying the parameters within a reasonable range of uncertainty. The SST field the model produces with the best fit parameters is the best the model can do. If the differences between the model and data are larger than can be accounted for by remaining uncertainties in the heat flux parameterization and forcing data then the ocean model must be held to be at fault. Using this method of analysis, a fundamental model fault is identified. Inadequate treatment of mixed layer/entrainment processes in upwelling regions of the eastern tropical Pacific leads to a large and seasonally varying error in the model SST. Elsewhere the model SST is insufficiently different from observed to be able to identify model errors.

Seager, Richard↗