Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selective gas adsorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Thin Alumina Film as a Tritium Adsorption Inhibitor for Stainless Steel 316

The effect of a thin alumina coating on stainless-steel 316 (SS316) samples on tritium adsorption and transport are discussed. Compact films of alumina were produced on the surfaces of pristine SS316 samples using an atomic layer deposition (ALD) technique. Subsequently, these samples were exposed for 24 hours to a deuterium-tritium gas mixture (P T =0.5 atm, 25°C). A combination of methods including selective-etching and programmed thermal desorption were employed to assess both, the depth profile of the tritium concentration in the sample and the total quantity of tritium absorbed respectively. Tritium was quantitatively determined through the measurement of beta radioactivity using liquid-scintillation counting techniques. Data suggest that SS316 with a thin film of alumina reduces the total tritium uptake by ~25% relative to uncoated samples. Significantly, such films appear to reduce, by a factor of 200, tritium diffusion into SS316 and therefore constitute an effective barrier against tritium transport. This observation is of practical importance for tritium and, generally, reactive gas handling.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Control of Permanent Porosity in Type 3 Porous Liquids via Solvent Clustering

Porous liquids (PLs) are an exciting new class of materials for carbon capture due to their high gas adsorption capacity and ease of industrial implementation. They are composed of sorbent particles suspended in a nonadsorbed solvent, forming a liquid with permanent porosity. While PLs have a vast number of potential compositions based on the number of solvents and sorbent materials available, most of the research has been focused on the selection of the sorbent rather than the solvent. Therefore, PL design criteria on the supramolecular structures of the solvent are explored to create a fundamental understanding of how the solvent enables PL formation for rapid discovery of new PL compositions. Atomistic molecular dynamics simulation of eight solvents with a range of molecular sizes, shapes, and intramolecular bonding was performed, identifying that the shape and size of molecular clusters formed in the solvent are the driving predictor of PL formation rather than the size of the individual solvent molecule. The results demonstrate a significant departure from common approaches to PL formation based on the steric exclusion of solvent molecules from the sorbent via the size of the pore aperture. A modeling and experimental validation study further supports these findings. In conclusion, through this computational material design study, a previously unexplored mechanism in PL formation, solvent–solvent clustering, is identified as a critical factor for the accelerated discovery of liquid phase carbon capture materials.

Carbon capture↗
NASA NTRS1971

Evaluation and selection of refrigeration systems for lunar surface and space applications

Evaluated are the various refrigeration machines which could be used to provide heat rejection in environmental control systems for lunar surface and spacecraft applications, in order to select the best refrigeration machine for satisfying each individual application and the best refrigeration machine for satisfying all of the applications. The refrigeration machine considered include: (1) vapor comparison cycle (work-driven); (2) vapor adsorption cycle (heat-driven); (3) vapor absorption cycle (heat-driven); (4) thermoelectric (electrically-driven); (5) gas cycle (work driven); (6) steam-jet (heat-driven).

Copeland, R. J.↗
DOE OSTI2021

Metal–Organic Framework Based Hydrogen-Bonding Nanotrap for Efficient Acetylene Storage and Separation

The removal of carbon dioxide (CO 2 ) from acetylene (C 2 H 2 ) is a critical industrial process for manufacturing high purity C 2 H 2 . However, it remains challenging to address the trade-off between adsorption capacity and selectivity, on account of their similar physical properties and molecular sizes. To overcome this difficulty, here we report a novel strategy involving the regulation of hydrogen-bonding nanotrap on the pore surface to promote the separation of C 2 H 2 /CO 2 mixtures, in three isostructural metal-organic frameworks (MOFs, named as MIL-160, CAU-10H, and CAU-23, respectively). Among them, MIL-160, which has abundant hydrogen-bonding acceptors as nanotraps, can selectively capture acetylene molecules and demonstrates ultra-high C 2 H 2 storage capacity (191 cm 3 g –1 , or 213 cm 3 cm –3 ) but much less CO 2 uptake (90 cm 3 g –1 ) under ambient conditions. The C 2 H 2 adsorption amount of MIL-160 is remarkably higher than the other two isostructural MOFs (86 cm 3 g –1 and 119 cm 3 g –1 for CAU-10H and CAU-23 respectively) under the same conditions. More importantly, both simulation and experimental breakthrough results show that MIL-160 sets a new benchmark for equimolar C 2 H 2 /CO 2 separation in terms of the separation potential (Δq break = 5.02 mol/kg) and C 2 H 2 productivity (6.8 mol/kg). In addition, in-situ FT-IR experiments combined with computational modeling further reveal that the unique host-guest multiple hydrogen-bonding interactions between the nanotrap and C 2 H 2 is the key factor for achieving extraordinary acetylene storage capacity and superior C 2 H 2 /CO 2 selectivity. Furthermore, this work provides a novel and powerful approach to address the trade-off of this extremely challenging gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Crystallization-assisted water adsorption in amorphous molecular adsorbents

Efficient and stable water adsorbents are essential for removing moisture from natural gas and olefins during their production. Industrial desiccants such as alumina and zeolites require high regeneration temperatures, while metal-organic frameworks often suffer from limited long-term stability and reusability. Here, we introduce a new type of molecular desiccants (M-PyC) that, in principle, can be reused indefinitely. These simple molecular coordination complexes undergo fully reversible phase transitions between crystalline and amorphous states through the decoordination (bond breaking) and recoordination (bond reforming) of water molecules. They exhibit high water uptake (30 wt%) and superb selectivity, excluding hydrocarbons entirely. Their effectiveness for dehydration, combined with low regeneration temperature, fast desorption kinetics, low-cost and green synthesis, easy scalability to kilogram quantities, and essentially unlimited recyclability, makes them truly competitive dehydration agents for industrial separations. The use of amorphous molecular adsorbents, where crystallinity and porosity are no longer stringent requirements, and the adsorption-desorption process entirely under ambient air, offers a conceptually different approach to adsorption-based separation science and potentially realistic solution to the long-standing challenge of sustained stability in coordinate-bonded adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Data for Carbon-negative Hydrogen: Aqueous Phase Reforming (APR) of Glycerol over NiPt Bimetallic Catalyst Coupled with CO2 Sequestration

Herein we report the production of high-pressure (19.3 bar), carbon-negative hydrogen (H2) from glycerol with a purity of 98.2 mol% H2, 1.8 mol% light hydrocarbons (mainly methane), and 400 ppm of CO. Aqueous phase reforming (APR) of 10 wt% glycerol solution was studied with a series of NiPt alumina bimetallic catalysts supported on alumina. The Ni8Pt1-450 catalyst had the highest hydrogen selectivity (95.6%) and the lowest alkanes selectivity (3.7%) of the tested catalysts. The hydrogen selectivity decreased in the order of Ni8Pt1-450 > Ni8Pt1-260 > Ni1Pt1-260 > Pt-260. The CO2 was sequestered with CaO adsorbent which formed CaCO3. We measured the adsorption capacity of the CaO adsorbent at different temperatures. Life cycle analysis showed that the APR of glycerol coupled with CO2 capture has net negative CO2 equivalent greenhouse gas emissions. The CO2 emissions are −9.9 kg CO2 eq./kg H2 and −50.1 kg CO2 eq./kg H2 when grid electricity and renewable electricity are used, respectively, and the CO2 is allocated respectively to the mass of products produced. The cost of this H2 (denoted as “green-emerald”) was estimated to be 2.4 USD per kg H2 when grid electricity is used and 2.7 USD per kg H2 when using renewable electricity. The cost of glycerol has the highest contribution of 1.71 USD per kg H2. Participation in the carbon credit markets can further decrease the price of the produced H2.

Catalysis↗
DOE OSTI2023

Advanced Structured Adsorbent Architectures for Transformative Carbon Dioxide Capture Performance (Final Report)

Svante is a world leader at using solid sorbents for low-cost Carbon Dioxide (CO 2 ) capture, a technology which is recognized as critical in meeting the dual mandates of energy security/reliability and the mitigation of man-made CO 2 emissions. Svante has been developing proprietary adsorbent material compositions, forming them into structured laminates, developing and optimizing process cycles, and system design for efficient capture of CO 2 from post-combustion flue gases of thermal power plants and industrial facilities. The deployment of first-generation CO 2 capture technology has been significantly hampered by high costs and energy penalties, among other barriers. Second generation CO 2 capture technologies (including the Mark I variant of Svante’s Veloxotherm™ adsorption-based technology), utilizing single adsorbent architecture, show promise for reducing the barriers to deploying CO 2 capture plants in commercially meaningful numbers. The objective of this project was to evaluate the Recipient’s transformational (Mark-II) VeloxoTherm™ Technology via the development and bench-scale testing of an advanced structured adsorbent, including novel Bi-layer, laminated adsorbent structures and segmented beds. Svante selected, synthesized, and characterized tailored solid adsorbents for computational modeling, advanced structured adsorbent development, process simulations, and dynamic bench scale (~1-10 kg/day CO 2 captured) testing using an existing single-bed VeloxoTherm™ Station (VTS) coupled with a natural gas-fired boiler. Segmented beds used the in-house, multi-bed Process Demonstration Unit (PDU) to demonstrate key performance indicators (KPIs), such as recovery, product purity, regeneration energy, and the integrated system's productivity in lifetime analysis. Segmented beds were used at a 1 tonne per day (TPD) unit at an industrial site to provide bench-scale validation of performance in an industrial setting. Svante was developing and optimizing the post-combustion CO 2 adsorption technology architectures, including the Bi-layer and segmented laminated adsorbent structure design, integrated rapid cycle temperature swing adsorption (RC-TSA) cycle, flow path architecture, and adsorbent bed construction and packaging (including gas porting) to progress towards achievement of DOE’s Transformational CO 2 Capture goals of 95% CO 2 purity and a cost of electricity at least 30% lower than a supercritical Pulverized Coal (PC) power plant with CO 2 capture, or approximately $30 per tonne of CO 2 captured ready for demonstration by 2030. The main requirements to reach the DOE target cost of carbon capture below $30/MT using Rapid-Cycling Temperature Swing Adsorption (RC-TSA) are as follows: (1) Increased capacity at different CO 2 concentrations, (2) Increased sorbents cycle life, (3) Increased O 2 resistance, and (4) Decreased steam requirement to extract 1 kg of CO 2 .

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Deposition of an ultrathin palladium (Pd) coating on SAPO-34 membranes for enhanced H 2 /N 2 separation

Hydrogen energy has attracted great attention due to its properties of high energy transferring efficiency and zero pollution emission. Zeolite membranes are promising candidates for H 2 separation because of their uniform, molecular-sized pores and high thermal and mechanical stabilities. However, thicker membranes or modification treatments are often necessary to eliminate the defects formed during synthesis and post calcination, leading to low gas permeance. In this paper, we reported the deposition of an ultrathin palladium (Pd) coating on SAPO-34 membranes to improve H 2 separation performance. H 2 /N 2 selectivity was greatly increased by deposition of an ultrathin Pd coating on SAPO-34 membranes, while maintaining similar H 2 permeance. This might be attributed to the dissociative adsorption and associative desorption of H 2 on Pd, as well as fast diffusion of H 2 through ultrathin Pd coating. We also noticed that excessive Pd deposition would lead to the formation of cracks on SAPO-34 membranes, leading to deteriorated membrane performance.

08 HYDROGEN↗
DOE OSTI2024

Investigation of mechanochemical interactions of hydrogen with earth materials in a subsurface gas storage

The goal of this project is to investigate the molecular interactions of H 2 with earth materials (EMs) that may potentially affect economics and safety of H 2 geological storage (HGS). We investigated (1) the H 2 intercalation into interlayers of phyllosilicates, (2) the competitive adsorption of H 2 /CH 4 onto porous materials, and (3) solubility of H 2 in interfacial and confined hydrocarbons. Our results indicate that (i) H 2 intercalation into hydrated interlayers is thermodynamically unfavorable and H 2 solubility in hydrated clay interlayers is in the same order of magnitude as that in bulk water, (ii) CH 4 outcompetes H 2 in adsorption onto kerogen, due to stronger CH 4 -kerogen interactions than H 2 -kerogen interactions, (iii) H 2 tends to dissolve more in oil than in water, and the introduction of CO 2 as a cushion gas reduces H 2 partitioning near the kaolinite surfaces. The outcomes provide foundational knowledge for preparing the USA for future storage site selection and storage system design, supporting DOE missions in clean and secured energy.

08 HYDROGEN↗
DOE OSTI2021

Effects of Pore Connectivity on the Sorption of Fluids in Nanoporous Material: Ethane and CO2 Sorption in Silicalite

Adsorption of fluids in nanoporous materials is important for several applications including gas storage and catalysis. The pore network in natural, as well as engineered, materials can exhibit different degrees of connectivity between pores. While this might have important implications for the sorption of fluids, the effects of pore connectivity are seldom addressed in the studies of fluid sorption. We have carried out Monte Carlo simulations of the sorption of ethane and CO2 in silicalite, a nanoporous material characterized by sub-nanometer pores of different geometries (straight and zigzag channel like pores), with varied degrees of pore connectivity. The variation in pore connectivity is achieved by selectively blocking some pores by loading them with methane molecules that are treated as a part of the rigid nanoporous matrix in the simulations. Normalized to the pore space available for adsorption, the magnitude of sorption increases with a decrease in pore connectivity. The increased adsorption in the systems where pore connections are removed by blocking them is because of additional, albeit weaker, adsorption sites provided by the blocker molecules. By selectively blocking all straight or zigzag channels, we find differences in the absorption behavior of guest molecules in these channels.

Gautam, Siddharth (ORCID:0000000314435382)↗
DOE OSTI2023

Surface‐modified Ag@Ru‐P25 for photocatalytic CO 2 conversion with high selectivity over CH 4 formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO 2 reduction to solar fuels. A surface-modified Ag@Ru-P25 photocatalyst with H 2 O 2 treatment was designed in this study to convert CO 2 and H 2 O vapor into highly selective CH 4 . Ru doping followed by Ag nanoparticles (NPs) cocatalyst deposition on P25 (TiO 2 ) enhances visible light absorption and charge separation, whereas H 2 O 2 treatment modifies the surface of the photocatalyst with hydroxyl (–OH) groups and promotes CO 2 adsorption. High-resonance transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst, while thermogravimetric analysis, CO 2 adsorption isotherm, and temperature programmed desorption study were performed to examine the significance of H 2 O 2 treatment in increasing CO 2 reduction activity. The optimized Ag 1.0 @Ru 1.0 -P25 photocatalyst performed excellent CO 2 reduction activity into CO, CH 4 , and C 2 H 6 with a ~95% selectivity of CH 4 , where the activity was ~135 times higher than that of pristine TiO 2 (P25). For the first time, this work explored the effect of H 2 O 2 treatment on the photocatalyst that dramatically increases CO 2 reduction activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Band Structure-Driven Design of a α-CsPbI 3 Ammonia Sensor for Industrial Applications

We investigate the defect-dependent electronic structure and gas-sensing potential of cubic α-CsPbI 3 using first-principles density functional theory and nonadiabatic molecular dynamics. Among the intrinsic defects, interstitials, vacancies, antisites, and switches studied, the I Pb and Pb I antisite defects exhibit transition energy levels near the middle of the band gap, thus functioning as deep traps. Short-term adsorption of ammonia selectively modifies the electronic structure, coordinating with Pb at Pb I sites and Cs at I Pb sites, significantly altering recombination pathways. Detailed analysis reveals that NH 3 reduces anharmonicity at I Pb defects, enabling enhanced recombination at elevated temperatures, while trap-assisted recombination dominates at room temperature. Other analytes, including CH 3 NH 2 and NO 2 , show negligible impact on the band gap or recombination dynamics, highlighting the potential selectivity of NH 3 interactions. Ab initio nonadiabatic molecular dynamics simulations at 300 K and 600 K further demonstrate temperature-dependent modulation of carrier lifetimes, with NH 3 accelerating recombination at ambient conditions and suppressing certain pathways at higher temperatures. These findings suggest that α-CsPbI 3 can serve as a selective and sensitive ammonia sensor over a broad temperature range and offer insights for ammonia detection under industrially relevant conditions.

ammonia sensor↗
DOE OSTI2022

Measurement of isosteric heat of gas adsorption and Brunauer–Emmett–Teller (BET) surface area using a quartz crystal microbalance

The study of gas adsorption on a solid surface evaluates the affinity between sorbate gas and sorbent substrate and factors that contribute to this. This report presents a test platform for adsorption experiments of various gases on various solid surfaces. Controlled environmental conditions enable investigations in materials surface science and increase the consistency among adsorption data. The system utilizes a quartz crystal microbalance to perform gravimetric analysis of deposition and adsorption, enabling investigation of the interaction of gaseous molecules with solid surfaces. In this study, a quartz crystal microbalance as gas adsorption detector was integrated with an environmental chamber to create a versatile tool for gas adsorption experiments on thin films. Experimental operation of this apparatus was demonstrated via acquisition of the adsorption isotherms of cyclohexane vapor on a gold surface at 55 and 70 °C. The result indicated International Union of Pure and Applied Chemistry Type II adsorption. Consequentially, application of the Brunauer–Emmett–Teller model to the isotherm data subject to predefined criteria for linear region selection yielded a surface area of the sorbent of 0.53 cm2 at 55 °C. From the monolayer region of the isotherms, the isosteric heat of adsorption of the cyclohexane vapor on gold was calculated to be 37 kJ mol-1.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Effective CH4/N2 Separation using NU-1000 at High Pressures

Separation of methane (CH4) from other gases is of significant importance to reducing greenhouse gas emissions. In particular, the development and discovery of efficient adsorbents under pressure swing adsorption (PSA) conditions is a focus many research papers. We evaluated the potential of CH4/N2 separation performance using four adsorbents, including zirconium-based metal organic frameworks (NU-1000, UiO-66, and UiO-67) and a conventional adsorbent, zeolite-13X. Among them, NU-1000 presented high CH4/N2 selectivity (2.8) at 15 bar through ideal adsorbed solution theory because it has micro- and mesopores coupled with the large surface area, and a polar hydroxyl group along the pore surface. NU-1000 has a large CH4 working capacity (4.79) under PSA processes. These results demonstrated that NU-1000 is a sufficiently competitive adsorbent in PSA processes for CH4/N2 separation.

MOFs, NU-1000, separation↗
DOE OSTI2020

Promoting the cleavage of C-O bonds at the interface between a metal oxide cluster and a Co(0001) support

As a first step toward the rational design of Co-based catalysts with a higher activity and selectivity, we determine how one can activate a C-O bond at the interface between a metal oxide cluster and a Co(0001) support. The hypothesis here is that the metal ions in metal oxide clusters on a Co(0001) support enhance the adsorption of CO and weaken the C-O bond strength, which can then facilitate the dissociation of the CO reactant. To test this hypothesis, we developed three computational models of Ti4O8/Co(0001), Zr4O8/Co(0001), and Mn8O8/Co(0001). We quantify the CO adsorption behavior at the interface sites between an oxide cluster and the Co(0001) support as well as the corresponding IR spectra. We correlate the computed CO stretch frequencies with their CO adsorption energies, as well as the CO stretch frequency with the C-O bond length, and related these findings to the changes in the chemical bonding in the bound CO. The interface is the most favorable site for CO adsorption. Adsorption results in an increase of the C-O bond length and a decrease in its vibrational frequency. From a chemical bonding analysis, the bond order in CO at this site drops from 3 (in the gas phase) to 1. This decrease in bond order is a necessary precursor stage for CO dissociation. The experimental measurements of the corresponding FTIR spectra support this point. The favorability of CO adsorption at the interface sites is due to an electron transfer from the metal ion in the metal oxide cluster to the O atom in CO. We establish a linear relationship between C-O bond length and CO frequency and this relationship is found to be independent of the support, type of metal oxide cluster, or the adsorption site.

Fischer-Tropsch Synthesis, Heterogeneous Catalysis↗
NASA NTRS1973

Mass spectrometric analysis of the volatiles released by heating or crushing rocks

Vacuum extraction with subsequent mass spectrometric analysis of evolved volatiles was selected as the analytical procedure. The high-vacuum gas-handling system was constructed of stainless steel. The system was completely free from mercury, grease, or volatile organic materials. The furnace for heating the samples is discussed together with the high-vacuum crusher, the mass spectrometer, and approaches for water determination. The analytical procedure is considered, giving attention to the extraction of volatiles, adsorption studies, and the analysis of volatiles.

Barker, C.↗
DOE OSTI2023

CO 2 Hydrogenation: Na Doping Promotes CO and Hydrocarbon Formation over Ru/m-ZrO 2 at Elevated Pressures in Gas Phase Media

Sodium-promoted monoclinic zirconia supported ruthenium catalysts were tested for CO 2 hydrogenation at 20 bar and a H 2 :CO 2 ratio of 3:1. Although increasing sodium promotion, from 2.5% to 5% by weight, slightly decreased CO 2 conversion (14% to 10%), it doubled the selectivity to both CO (~36% to ~71%) and chain growth products (~4% to ~8%) remarkably and reduced the methane selectivity by two-thirds (~60% to ~21%). For CO 2 hydrogenation during in situ DRIFTS under atmospheric pressure, it was revealed that Na increases the catalyst basicity and suppresses the reactivity of Ru sites. Higher basicity facilitates CO 2 adsorption, weakens the C–H bond of the formate intermediate promoting CO formation, and inhibits methanation occurring on ruthenium nanoparticle surfaces. The suppression of excessive hydrogenation increases the chain growth probability. Decelerated reduction during H 2 -TPR/TPR-MS and H 2 -TPR-EXAFS/XANES at the K-edge of ruthenium indicates that sodium is in contact with ruthenium. A comparison of the XANES spectra of unpromoted and Na-promoted catalysts after H 2 reduction showed no evidence of a promoting effect involving electron charge transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microkinetic simulation and fitting of the temperature programmed reaction of methanol on CeO 2 (111): H 2 and H 2 O + V production

The kinetics and mechanism for temperature programmed reaction following adsorption of an adsorbate can be better understood by simulation and fitting with comparison to experiment. A case study is presented here for the chemistry of adsorption of methanol on a CeO 2 (111) surface followed by heating. The gas products observed are CH 3 OH, CH 2 O, H 2 , H 2 O, CO, CO 2 . At low temperatures (< 500 K), there is formation of H 2 and H 2 O, where the H 2 O formation is accompanied by lattice oxygen vacancy (V) formation and is thus important in determining the selectivity towards different products. Microkinetic modeling was performed using a recently published method for fitting to gain mechanistic knowledge of the H 2 and H 2 O + V formation at < 500 K. In the kinetic models used here, most of the H 2 and H 2 O + V V formation can be explained by a mechanism in which a metastable state of hydrogen on the surface (H*) acts as an intermediate. Two possibilities were investigated for the source of the metastable H* intermediate: H* from CH bond breaking of methoxies, or promotion of H+ to H* via electron transfer from ionic methoxies absorbed in oxygen vacancies (CH 3 O - /V). From this study, we consider the latter to be more likely at < 500 K. For the H 2 O formation, it was found to be critical that H 2 O cannot dissociate directly on oxygen vacancies. Finally, catalytic chemistry was observed in simulations, including catalytic formation of oxygen vacancies. Various features of the experimental results were reproduced, including methoxies being the major carbon containing species on the surface at < 500 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗