Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scattering transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Heterodyne x-ray diffuse scattering from coherent phonons

Here, we report Fourier-transform inelastic x-ray scattering measurements of photoexcited GaAs with embedded ErAs nanoparticles. We observe temporal oscillations in the x-ray scattering intensity, which we attribute to inelastic scattering from coherent acoustic phonons. Unlike in thermal equilibrium, where inelastic x-ray scattering is proportional to the phonon occupation, we show that the scattering is proportional to the phonon amplitude for coherent states. The wavevectors of the observed phonons extend beyond the excitation wavevector. The nanoparticles break the discrete translational symmetry of the lattice, enabling the generation of large wavevector coherent phonons. Elastic scattering of x-ray photons from the nanoparticles provides a reference for heterodyne mixing, yielding signals proportional to the phonon amplitude.

36 MATERIALS SCIENCE↗

Conjugation and transformation of the wave front by stimulated Brillouin scattering of vortex Laguerre - Gaussian laser modes

We study experimentally stimulated Brilluoin scattering (SBS) of vortex laser beams, namely, the LG{sub 1}{sup 1} and LG{sub 0}{sup 1} Laguerre -Gaussian modes. The wave front transformation is experimentally demonstrated in the case of SBS of the LG{sub 1}{sup 1} laser mode, directly focused into the SBS cell, when the fundamental Gaussian mode LG{sub 0}{sup 0} rather than the conjugate mode is selected from the Stokes beam. It is shown that optical vortices become phase conjugate by destroying the laser mode structure in the SBS cell. Phase conjugation (PC) of the LG{sub 0}{sup 1} and LG{sub 1}{sup 1} modes is obtained in the SBS mirror using a regular aberrator (microlens raster) in the system of laser beam focusing into the SBS cell.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of krypton atoms on the structure of hydrogenated amorphous carbon deposited by plasma enhanced chemical vapor deposition

Hydrogenated amorphous carbon (a-C:H) films were prepared by plasma enhanced chemical vapor deposition using methane (CH{sub 4}) plus krypton (Kr) mixed atmosphere. The depositions were performed as function of the bias voltage and krypton partial pressure. The goal of this work was to study the influence of krypton gas on the physical properties of a-C:H films deposited on the cathode electrode. Krypton concentration up to 1.6 at. %, determined by Rutherford Back-Scattering, was obtained at high Kr partial pressure and bias of -120 V. The structure of the films was analyzed by means of optical transmission spectroscopy, multi-wavelength Raman scattering and Fourier Transform Infrared spectroscopy. It was verified that the structure of the films remains unchanged up to a concentration of Kr of about 1.0 at. %. A slight graphitization of the films occurs for higher concentration. The observed variation in the film structure, optical band gap, stress, and hydrogen concentration were associated mainly with the subplantation process of hydrocarbons radicals, rather than the krypton ion energy.

36 MATERIALS SCIENCE↗

Solvation Structure of Methanol-in-Salt Electrolyte Revealed by Small-Angle X-ray Scattering and Simulations

The solvation structure of water-in-salt electrolytes was thoroughly studied, and two competing structures—anion solvated structure and anion network—were well-defined in recent publications. To further reveal the solvation structure in those highly concentrated electrolytes, particularly the influence of solvent, methanol was chosen as the solvent for this proposed study. In this work, small-angle X-ray scattering, small-angle neutron scattering, Fourier-transform infrared spectroscopy, and Raman spectroscopy were utilized to obtain the global and local structural information. With the concentration increment, the anion network formed by TFSI - became the dominant structure. Meanwhile, the hydrogen bonds among methanol were interrupted by the TFSI - anion and formed a new connection with them. Further, molecular dynamic simulations with two different force fields (GAFF and OPLS-AA) are tested, and GAFF agreed with synchrotron small-angle X-ray scattering/wide-angle X-ray scattering (SAXS/WAXS) results well and provided insightful information about molecular/ion scale solvation structure. This article not only deepens the understanding of the solvation structure in highly concentrated solutions, but more importantly, it provides additional strong evidence for utilizing SAXS/WAXS to validate molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of microstructure and texture across dissimilar super duplex/austenitic stainless steel weldment joint by super duplex filler metal

In the present paper, microstructural changes across an as-welded dissimilar austenitic/duplex stainless steel couple welded by a super duplex stainless steel filler metal using gas tungsten arc welding process is characterized with optical microscopy and electron back-scattered diffraction techniques. Accordingly, variations of microstructure, texture, and grain boundary character distribution of base metals, heat affected zones, and weld metal were investigated. The results showed that the weld metal, which was composed of Widmanstätten austenite side-plates and allotriomorphic grain boundary austenite morphologies, had the weakest texture and was dominated by low angle boundaries. The welding process increased the ferrite content but decreased the texture intensity at the heat affected zone of the super duplex stainless steel base metal. In addition, through partial ferritization, it changed the morphology of elongated grains of the rolled microstructure to twinned partially transformed austenite plateaus scattered between ferrite textured colonies. However, the texture of the austenitic stainless steel heat affected zone was strengthened via encouraging recrystallization and formation of annealing twins. At both interfaces, an increase in the special character coincident site lattice boundaries of the primary phase as well as a strong texture with <100> orientation, mainly of Goss component, was observed. - Graphical abstract: Display Omitted - Highlights: • Weld metal showed local orientation at microscale but random texture at macroscale. • Intensification of <100> orientated grains was observed adjacent to the fusion lines. • The austenite texture was weaker than that of the ferrite in all duplex regions. • Welding caused twinned partially transformed austenites to form at SDSS HAZ. • At both interfaces, the ratio of special CSL boundaries of the primary phase increased.

36 MATERIALS SCIENCE↗

Surface species produced in the radiolysis of zirconia nanoparticles

Modifications to water-zirconia nanoparticle interfaces induced by {gamma} irradiation have been examined using diffuse reflection infrared Fourier transform (DRIFT), Raman scattering, and electron paramagnetic resonance (EPR) techniques. Spectroscopy with in situ heating was used to probe variations in the dissociatively bound chemisorbed water on the zirconia nanoparticles following evaporation of the physisorbed water. DRIFT spectra show that the bridged Zr-OH-Zr species decreases relative to the terminal Zr-OH species upon irradiation. No variation is observed with Raman scattering, indicating that the zirconia morphology is unchanged. EPR measurements suggest the possible formation of the superoxide ion, presumably by modification of the surface OH groups. Trapped electrons and interstitial H atoms are also observed by EPR.

36 MATERIALS SCIENCE↗

In-situ neutron scattering studies of magnetic shape memory alloys under stress, temperature, and magnetic fields

We have utilized the SMARTS engineering neutron diffractometer to study the crystallographic orientation and phase transformations in the ferromagnetic shape memory alloy Ni 2MnGa under conditions of temperature (200-600K), stress (500MPa), and magnetic field (2T). Neutrons are uniquely suited to probe the crystallographic response of materials to external stimuli because of their high penetration, which allows them to sample the bulk of the material (as opposed to the surface) as well as pass through environmental chambers. A single crystal of Ni{sub 5}MnGa was repeatedly thermally cycled through the Austenitic-Martensitic phase transformation under varying conditions of applied stress, magnetic field or both. In-situ neutron diffraction was used to quantitatively monitor the population of the crystallographic variants in the martensitic phase as a function of the external stimuli during cooling. Neutron diffraction was used to monitor variant selection in the Ferromagnetic Shape Memory Alloy Ni{sub 2}Mn Ga during austenitic to martensitic transformation under varying conditions of externally applied stress and magnetic field. Qualitatively, the results were to be expected in this simple example. The shorter and magnetically soft c-axis of the tetragonal martensitic phase aligned with the compressive stress or magnetic field. However, neutron diffraction proved useful in directly quantifying the selection of the preferred variant by external influence. For instance, by quantifying the variant selection, the neutron diffraction results made apparent that the sample 'remembered' a loading cycle following a 'reset' cycle with no external applied stress. Moreover, the power of in-situ neutron diffraction will become more apparent when applied to more complex, less understood, samples such as polycrystalline samples or composite samples.

36 MATERIALS SCIENCE↗

Impact of Nanosilicates on Poly(vinylidene fluoride) Crystal Polymorphism: Part 1. Melt-crystallization at High Supercooling

Polymorphism of poly(vinylidene fluoride), PVDF, in the presence of Lucentite STN organically modified silicate (OMS) is investigated for PVDF nanocomposites melt-crystallized at high supercooling temperatures where neat PVDF crystallizes exclusively in the alpha crystalline phase. Nanocomposites were prepared from solution with 0-1.0 wt% OMS composition. Here we observed that clay addition promotes gamma phase formation in nanocomposites melt-crystallized at high supercooling (i.e., at low crystallization temperature), whereas previously we showed that even small amount of nanosilicates resulted in beta phase formation in cold-crystallized PVDF nanocomposites. Wide-angle X-ray scattering (WAXS), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies showed that {alpha}- and {gamma}-phases co-existed in nanocomposites containing up to 0.1 wt% OMS, and the amount of {alpha}-crystals substantially diminished for higher OMS content. Formation of {gamma}-crystal phase was confirmed with morphologic observation of spherulites of low-birefringence using polarizing optical and atomic force microscopies, and their crystalline structures were verified by FTIR and Raman microscopic spectroscopy. We also address in this work the ambiguities in assessing PVDF crystallographic phases, and correct the phase identification errors which have persisted up to this point in the literature based on melting point confusion. The crystal phase identification for PVDF nanocomposites is discussed and clarified, based on X-ray scattering, vibrational spectra, and thermal analysis. For reference, we provide a vibrational band list, indicating the close, or overlapping bands, of the three phases of PVDF: {alpha}, {beta} and {gamma}.

36 MATERIALS SCIENCE↗

Local structural behavior of PbZr 0.5 Ti 0.5 O 3 during electric field application via in situ pair distribution function study

Here, the local structural behavior of PbZr 0.5 Ti 0.5 O3 (PZT 50/50) ceramics during application of an electric field was investigated using pair distribution function (PDF) analysis. In situ synchrotron total scattering was conducted, and the PDFs were calculated from the Fourier transform of the total scattering data. The PDF refinement of the zero-field data suggests a local-structure model with [001] Ti-displacement and negligible Zr-displacement. The directional PDFs at different field amplitudes indicate the bond-length distribution of the nearest Pb-B (B = Zr/Ti) pair changes significantly with the field. The radial distribution functions (RDFs) of a model for polarization rotation were calculated. The calculated and the experimental RDFs are consistent. This result suggests the changes in Pb-B bond-length distribution could be dominantly caused by polarization rotation. Peak fitting of the experimental RDFs was also conducted. The peak position trends with increasing field are mostly in agreement with the calculation result of the polarization rotation model. The area ratio of the peaks in the experimental RDFs also changed with field amplitude, indicating that Zr atoms have a detectable displacement driven by the electric field. Our study provides an experimental observation of the behaviors of PZT 50/50 under field at a local scale which supports the polarization rotation mechanism.

36 MATERIALS SCIENCE↗

A cheating limit for structured communities

The constructive creativity of natural selection originates from its paradoxical ability to foster cooperation through competition. Cooperating communities ranging from complex societies to somatic tissue are constantly under attack, however, by non-cooperating mutants or transformants, called 'cheaters'. Structure in these communities promotes the formation of cooperating clusters whose competitive superiority can alone be sufficient to thwart outgrowths of cheaters and thereby maintain cooperation. But we find that when cheaters appear too frequently -- exceeding a threshold mutation or transformation rate -- their scattered outgrowths infiltrate and break up cooperating clusters, resulting in a cascading loss of community integrity, a switch to net positive selection for cheaters, and ultimately in the loss of cooperation. We find that this threshold mutation rate is directly proportional to the fitness support received from each cooperating neighbor minus the individual fitness benefit of cheating. When mutation rate also evolves, this threshold is crossed spontaneously after thousands of generations, at which point cheaters rapidly invade. In a structured community, cooperation can persist only if the mutation rate remains below a critical value.

55↗

Pressure‐induced polyamorphism in lanthanide‐solute metallic glasses

The electronic structure inheritance of lanthanide‐solvent atoms in lanthanide‐based metallic glasses has been proposed. Is a polyamorphism possible in lanthanide‐solute metallic glasses? So far, polyamorphic phase transitions in metallic glass containing lanthanide have been observed only in lanthanide‐solvent metallic glasses. Here, a pressure‐induced transition between two distinct amorphous states, accompanied by a 7% volume collapse at ambient pressure, was observed in La 43.4 Pr 18.6 Al 14 Cu 24 metallic glass, with low lanthanide content, by using in situ X‐ray total scattering method. The transformation also indicated by changes in short range and medium range order. Thus, it is proposed that the lanthanide‐solute metallic glasses also inherit 4 f electronic transition from pure lanthanide element in polyamorphic transition. This discovery offers a supplement to research on lanthanide‐based metallic glasses, which further provides a new perspective of the polyamorphic transformation in metallic glasses containing lanthanide element.

Li, Liangliang↗

Effect of nanographene platelets on adsorption and sonophotocatalytic performances of TiO2/CuO composite for removal of organic pollutants

Highlights: • TiO{sub 2}/CuO composite incorporated with nanographene platelets (NGP). • Catalytic ability of TiO{sub 2}/CuO/NGP composite for removal of MB investigated. • Better adsorption ability for MB compared to TiO{sub 2}/CuO composite without NGP. • Adsorption ability increases with increasing NGP content up to optimal level. • TiO{sub 2}/CuO/NGP with 10 wt% NGP exhibits best photo- and sonophoto-catalysis. - Abstract: TiO{sub 2}/CuO composites incorporated with different amounts of nanographene platelets (NGP) were synthesized by hydrothermal processing. The TiO{sub 2}/CuO/NGP composite was characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, dynamical light scattering, Raman spectroscopy, Fourier–transform infrared spectroscopy, ultraviolet (UV)-visible diffuse reflectance spectroscopy, Brunauer—Emmett—Teller (BET) surface area analysis, and electron spin resonance. The catalytic ability of the composite for the removal of methylene blue from an aqueous solution was examined by adsorption, photocatalytic, and sonophotocatalytic experiments. The composite was found to exhibit better adsorption ability for methylene blue compared to the TiO{sub 2}/CuO composite without NGP. The photocatalytic activity of the composite was examined by UV and visible (Vis) light irradiation, while the sonophotocatalytic activity was examined by a combination of UV and Ultrasound (UV + US) and Vis + US. Both examinations showed that the light and ultrasonic responses were enhanced by compositing with NGP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An In-situ X-ray Scattering Study During Uniaxial Stretching of Ionic Liquid/Ultra-high Molecular Weight Polyethylene Blends

An ionic liquid (IL) 1-docosanyl-3-methylimidazolium bromide was incorporated into ultra-high molecular weight polyethylene (UHMWPE) and formed IL/UHMWPE blends by solution mixing. The structure evolution of these blends during uniaxial stretching was followed by in-situ synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. During deformation at room temperature, deformation-induced phase transformation from orthorhombic to monoclinic phase was observed in both IL/UHMWPE blends and neat UHMWPE. The elongation-to-break ratios of IL/UHMWPE blends were found to increase by 2-3 times compared with that of pure UHMWPE, while the tensile strength remained about the same. In contrast, during deformation at high temperature (120 C), no phase transformation was observed. However, the blend samples showed much better toughness, higher crystal orientation and higher tilting extent of lamellar structure at high strains.

36 MATERIALS SCIENCE↗

Giant Electrostriction via Nanodomain Engineering in Relaxor Ferroelectric Polymers

Relaxor ferroelectric (RFE) polymers hold great promise for artificial muscles due to their high actuation strain, high loading stress, and fast response. However, the structural origin underlying their large electrostrictive deformation remains elusive. In this study, we investigate poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)]-based RFE terpolymers, incorporating 1,1-chlorofluoroethylene (CFE) or chlorotrifluoroethylene (CTFE) (the terpolymers are denoted as terP-CFE and terP-CTFE, respectively) as termonomers. Although both terpolymers show similar semicrystalline morphology, drastically different electrostrictive properties are observed. Specifically, the terP-CFE annealed at 100 °C achieves a record-high transverse strain of ∼10.6%, whereas 100 °C-annealed terP-CTFE only shows a much lower actuation strain of ∼4.2% at the same poling field of 190 MV/m. To elucidate the origin of this difference, time-resolved wide-angle X-ray diffraction, small-angle X-ray scattering, and Fourier transform infrared experiments are performed during in situ electric poling. An RFE-to-ferroelectric (FE) crystal phase transition is observed for terP-CFE but is absent for terP-CTFE. Beyond the contribution of the crystalline phase, the oriented amorphous fraction and crystalline defects (e.g., taut-tie molecules) also play significant roles in enhancing electrostriction. In conclusion, this mechanistic insight provides a valuable foundation for the rational design of next-generation RFE polymers with tunable properties through defect engineering of their semicrystalline structures.

36 MATERIALS SCIENCE↗

Direct recovery of interfacial topography from coherent X-ray reflectivity: model calculations for a 1D interface

The use of coherent X-ray reflectivity to recover interfacial topography is described using model calculations for a one-dimensional interface. The results reveal that the illuminated topography can be recovered directly from the measured reflected intensities. This is achieved through an analysis of the Patterson function, the Fourier transform of the scattering intensity (as a function of lateral momentum transfer, Q // , at fixed vertical momentum transfer, Q z ). Specifically, a second-order Patterson function is defined that reveals the discrete set of separations and contrast factors (i.e., the product of changes in the effective scattering factor) associated with discontinuities in the effective interfacial topography. Finally, it is shown that the topography is significantly over-determined by the measurements, and an algorithm is described that recovers the actual topography through a deterministic sorting of this information.

36 MATERIALS SCIENCE↗

Collaborative Research: Neutrinos and Nucleosynthesis in Hot Dense Matter

The major accomplishments of the research activity at NC State during the five years were: to determine the effects and signatures of turbulence in supernova, to calculate r-process and supernova nucleosynthesis, and to determine the neutrino scattering and flavor transformation that occurs in black hole accretion disks. This report goes into more detail on them.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Quest For Bose-Einstein Condensation in Solid Helium

Ever since the seminal torsional oscillator (TO) measurements of Kim and Chan which suggested the existence of a phase transition in solid 4He, from normal to a supersolid state below a critical temperature Tc = 200 mK, there has been an unprecedented amount of excitement and research activity aimed at better understanding this phase. Despite much work, this remarkable phase has yet to be independently confirmed by conventional scattering techniques, such neutron scattering. We have carried out a series of neutron scattering measurements, which we here review, aimed at observing Bose-Einstein condensation (BEC) in solid 4He at temperatures below Tc. In bulk liquid 4He, the appearance of BEC below Tl signals the onset of superfluidity. The observation of a condensate fraction in the solid would provide an unambiguous confirmation for supersolidity . Although, our measurements have not yet revealed a non-zero condensate fraction or algebraic off diagonal long-range order n0 in solid 4He down to 65 mK, i.e. n0 = (0 0.3)%, our search for BEC and its corollaries continues with improved instrumentation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Carbon-hydrogen bonding in near-frictionless carbon.

The uniquely low friction behavior of near-frictionless carbon (NFC) as compared to conventional diamondlike carbon (DLC) is determined by the bonding within the film. Inelastic neutron scattering (INS) and Fourier transform infrared (FTIR) spectroscopy were used to probe the bonding environment of carbon and hydrogen; both INS and FTIR can probe the whole sample. Previous work has focused on surface studies; the present results show that in the film as a whole the majority of the hydrogen is adjacent to sp{sup 3}-bonded carbon. In addition this work has determined the absence of any molecular hydrogen in NFC.

08 HYDROGEN↗