Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scatter correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Characterization of Artifacts Introduced by the Empirical Volcano-Scan Atmospheric Correction Commonly Applied to CRISM and OMEGA Near-Infrared Spectra

The empirical volcano-scan atmospheric correction is widely applied to Martian near infrared CRISM and OMEGA spectra between 1000 and 2600 nanometers to remove prominent atmospheric gas absorptions with minimal computational investment. This correction method employs division by a scaled empirically-derived atmospheric transmission spectrum that is generated from observations of the Martian surface in which different path lengths through the atmosphere were measured and transmission calculated using the Beer-Lambert Law. Identifying and characterizing both artifacts and residual atmospheric features left by the volcano-scan correction is important for robust interpretation of CRISM and OMEGA volcano scan corrected spectra. In order to identify and determine the cause of spectral artifacts introduced by the volcano-scan correction, we simulated this correction using a multiple scattering radiative transfer algorithm (DISORT). Simulated transmission spectra that are similar to actual CRISM- and OMEGA-derived transmission spectra were generated from modeled Olympus Mons base and summit spectra. Results from the simulations were used to investigate the validity of assumptions inherent in the volcano-scan correction and to identify artifacts introduced by this method of atmospheric correction. We found that the most prominent artifact, a bowl-shaped feature centered near 2000 nanometers, is caused by the inaccurate assumption that absorption coefficients of CO2 in the Martian atmosphere are independent of column density. In addition, spectral albedo and slope are modified by atmospheric aerosols. Residual atmospheric contributions that are caused by variable amounts of dust aerosols, ice aerosols, and water vapor are characterized by the analysis of CRISM volcano-scan corrected spectra from the same location acquired at different times under variable atmospheric conditions.

OMEGA Near Infrared↗
NASA NTRS1982

Study to assess the importance of errors introduced by applying NOAA 6 and NOAA 7 AVHRR data as an estimator of vegetative vigor: Feasibility study of data normalization

The use of NOAA AVHRR data to map and monitor vegetation types and conditions in near real-time can be enhanced by using a portion of each GAC image that is larger than the central 25% now considered. Enlargement of the cloud free image data set can permit development of a series of algorithms for correcting imagery for ground reflectance and for atmospheric scattering anisotropy within certain accuracy limits. Empirical correction algorithms used to normalize digital radiance or VIN data must contain factors for growth stage and for instrument spectral response. While it is not possible to correct for random fluctuations in target radiance, it is possible to estimate the necessary radiance difference between targets in order to provide target discrimination and quantification within predetermined limits of accuracy. A major difficulty lies in the lack of documentation of preprocessing algorithms used on AVHRR digital data.

Duggin, M. J.↗
NASA NTRS1991

A fiber-optic probe for particle sizing in concentrated suspensions

A fiber-optic probe employing two monomode optical fibers, one for transmitting a Gaussian laser beam to the scattering volume and the second, positioned at some backscatter angle, for receiving the scattered light is described. Performance and suitability of the system for a process control environment is assessed by studying a suspension of polystyrene latex particles over a wide range of sizes and concentrations. The results show that the probe is ideal for a process control environment in industrial and laboratory applications. Particle size is recovered, without any additional corrections for multiple light scattering, in concentrations containing up to 10 percent solids of 39-nm polystyrene latex spheres.

Dhadwal, Harbans S.↗
NASA NTRS1993

Scattered light in the echelle modes of the Goddard High Resolution Spectrograph aboard the Hubble Space Telescope. II - Analysis of in-flight spectroscopic observations

We report on an analysis of observations made with the GHRS aboard the HST for the purpose of calibrating the effects of scattered light. The data were obtained during the first 2 years of flight operations as part of the Science Verification, Science Assessment Observations, and Guaranteed Time Observations programs. Both the general level of background light near the spectra and the filling-in of the cores of saturated interstellar absorption lines have been determined as functions of grating, order, wavelength, and aperture. The behavior is in accordance with our detailed analysis of prelaunch laboratory data and validates both the observing procedures and the data reduction developed on the basis of that experience. We present and discuss the use of a background (scattered light) removal algorithm designed to produce net spectra properly corrected for the effects of grating scattered light. The coefficients of the scattered light removal algorithm have been determined, and recommended numerical values are presented.

Cardelli, Jason A.↗
NASA NTRS2005

Bio-Optics of the Chesapeake Bay from Measurements and Radiative Transfer Calculations

We combined detailed bio-optical measurements and radiative transfer (RT) modeling to perform an optical closure experiment for optically complex and biologically productive Chesapeake Bay waters. We used this experiment to evaluate certain assumptions commonly used when modeling bio-optical processes, and to investigate the relative importance of several optical characteristics needed to accurately model and interpret remote sensing ocean-color observations in these Case 2 waters. Direct measurements were made of the magnitude, variability, and spectral characteristics of backscattering and absorption that are critical for accurate parameterizations in satellite bio-optical algorithms and underwater RT simulations. We found that the ratio of backscattering to total scattering in the mid-mesohaline Chesapeake Bay varied considerably depending on particulate loading, distance from land, and mixing processes, and had an average value of 0.0128 at 530 nm. Incorporating information on the magnitude, variability, and spectral characteristics of particulate backscattering into the RT model, rather than using a volume scattering function commonly assumed for turbid waters, was critical to obtaining agreement between RT calculations and measured radiometric quantities. In situ measurements of absorption coefficients need to be corrected for systematic overestimation due to scattering errors, and this correction commonly employs the assumption that absorption by particulate matter at near infrared wavelengths is zero.

Tzortziou, Maria↗
NASA NTRS1989

Atmospheric correction of high resolution land surface images

Algorithms to correct for atmospheric-scattering effects in high-spatial resolution land-surface images require the ability to perform rapid and accurate computations of the top-of-atmosphere diffuse radiance field for arbitrarily general surface reflectance distributions (which may be both heterogeneous and non-Lambertian) and atmospheric models. Using three-dimensional radiative transfer (3DRT) theory algorithms are being developed. The methodology used to perform the 3DRT calculations is described. It is shown how these calculations are used to perform atmospheric corrections, and the sensitivity of the retrieved surface reflectances to atmospheric structural parameters is illustrated.

Diner, D. J.↗
DOE OSTI2025

Higher-derivative corrections in M-theory from precision numerical bootstrap

We study higher-derivative corrections to the graviton scattering amplitude in M-theory, via the stress tensor correlator of 3d$\mathcal{N}$= 8 U(N) k × U(N) –k ABJM theory (dual to graviton scattering in M-theory on AdS 4 × S 7 /ℤ k ). We use the conformal bootstrap combined with an integral constraint derived from supersymmetric localization in order to constrain semishort OPE coefficients appearing in the stress tensor correlator. We obtain islands that are significantly more precise than those in previous studies that did not use the integral constraint. Using these islands, we can estimate the powers and coefficients in a large central charge expansion. This allows us to accurately read off the N 3 LO contribution, from the protected D 6 R 4 correction, and also estimate the N 4 LO contribution, from the unprotected D 8 R 4 correction.

AdS-CFT correspondence↗
DOE OSTI2026

A Bayesian desmearing algorithm for Bonse–Hart USANS with anisotropic scattering

Ultra-small-angle neutron scattering (USANS) using Bonse–Hart optics provides micrometer-scale structural insights but suffers from severe slit-geometry smearing. While well-established for isotropic systems, quantitative desmearing of anisotropic data remains a challenge because conventional corrections break down for non-radial scattering. In this work, we address this by developing a resolution-aware Bayesian framework that explicitly incorporates anisotropy via an affine deformation to the scattering pattern, guided by the principle of parsimony. This results in orientation-resolved point-spread functions that enable a self-consistent determination of both the resolution and deformation parameters. Using Gaussian process regression with uncertainty quantification and a probabilistic correction for multiple scattering, we demonstrate the framework’s effectiveness through numerical benchmarks and experimental studies of a stretched polymer melt. Our approach enables the seamless integration of SANS and USANS data, facilitating quantitative structural analysis of deformed materials at nanometer to micrometer scales.

36 MATERIALS SCIENCE↗
NASA NTRS2005

Statistical Calibration and Validation of a Homogeneous Ventilated Wall-Interference Correction Method for the National Transonic Facility

Wind tunnel experiments will continue to be a primary source of validation data for many types of mathematical and computational models in the aerospace industry. The increased emphasis on accuracy of data acquired from these facilities requires understanding of the uncertainty of not only the measurement data but also any correction applied to the data. One of the largest and most critical corrections made to these data is due to wall interference. In an effort to understand the accuracy and suitability of these corrections, a statistical validation process for wall interference correction methods has been developed. This process is based on the use of independent cases which, after correction, are expected to produce the same result. Comparison of these independent cases with respect to the uncertainty in the correction process establishes a domain of applicability based on the capability of the method to provide reasonable corrections with respect to customer accuracy requirements. The statistical validation method was applied to the version of the Transonic Wall Interference Correction System (TWICS) recently implemented in the National Transonic Facility at NASA Langley Research Center. The TWICS code generates corrections for solid and slotted wall interference in the model pitch plane based on boundary pressure measurements. Before validation could be performed on this method, it was necessary to calibrate the ventilated wall boundary condition parameters. Discrimination comparisons are used to determine the most representative of three linear boundary condition models which have historically been used to represent longitudinally slotted test section walls. Of the three linear boundary condition models implemented for ventilated walls, the general slotted wall model was the most representative of the data. The TWICS code using the calibrated general slotted wall model was found to be valid to within the process uncertainty for test section Mach numbers less than or equal to 0.60. The scatter among the mean corrected results of the bodies of revolution validation cases was within one count of drag on a typical transport aircraft configuration for Mach numbers at or below 0.80 and two counts of drag for Mach numbers at or below 0.90.

Walker, Eric Lee↗
NASA NTRS2005

Statistical Calibration and Validation of a Homogeneous Ventilated Wall-Interference Correction Method for the National Transonic Facility

Wind tunnel experiments will continue to be a primary source of validation data for many types of mathematical and computational models in the aerospace industry. The increased emphasis on accuracy of data acquired from these facilities requires understanding of the uncertainty of not only the measurement data but also any correction applied to the data. One of the largest and most critical corrections made to these data is due to wall interference. In an effort to understand the accuracy and suitability of these corrections, a statistical validation process for wall interference correction methods has been developed. This process is based on the use of independent cases which, after correction, are expected to produce the same result. Comparison of these independent cases with respect to the uncertainty in the correction process establishes a domain of applicability based on the capability of the method to provide reasonable corrections with respect to customer accuracy requirements. The statistical validation method was applied to the version of the Transonic Wall Interference Correction System (TWICS) recently implemented in the National Transonic Facility at NASA Langley Research Center. The TWICS code generates corrections for solid and slotted wall interference in the model pitch plane based on boundary pressure measurements. Before validation could be performed on this method, it was necessary to calibrate the ventilated wall boundary condition parameters. Discrimination comparisons are used to determine the most representative of three linear boundary condition models which have historically been used to represent longitudinally slotted test section walls. Of the three linear boundary condition models implemented for ventilated walls, the general slotted wall model was the most representative of the data. The TWICS code using the calibrated general slotted wall model was found to be valid to within the process uncertainty for test section Mach numbers less than or equal to 0.60. The scatter among the mean corrected results of the bodies of revolution validation cases was within one count of drag on a typical transport aircraft configuration for Mach numbers at or below 0.80 and two counts of drag for Mach numbers at or below 0.90.

Walker, Eric L.↗
DOE OSTI2025

Slender-body approach for computing second-order wave loads in the frequency domain

This work presents a slender-body approach to evaluate the second-order wave loads acting on a floating structure in the frequency domain. The approach is in the same spirit as the common use of Morison’s equation to approximate the wave loads without solving the radiation/diffraction problem. To do so, we employ Rainey’s equation, which can be seen as an extension of the inertial part of Morison’s equation to include nonlinear effects. We introduce modifications to Rainey’s formulation in order to evaluate wave kinematics at the mean body position instead of the original approach of considering instantaneous displacements. We also propose a simple approximation to partially account for wave scattering effects on the second-order loads based on the analytical solution of a surface-piercing bottom-mounted vertical circular cylinder. Though limited to structures composed of cylinders, this slender-body approach is orders of magnitude faster than computing second-order wave coefficients with a radiation/diffraction code. We implemented this approach for difference-frequency (slow drift) loads in an open-source frequency-domain floating wind turbine model. We present comparisons against results obtained with radiation/diffraction theory for three reference floating wind turbine designs: the OC3-Hywind spar, the OC4-DeepCwind semisubmersible, and the VolturnUS-S semisubmersible. In general, the results show that the proposed slender-body approach with the correction to approximate wave scattering effects provides useful estimations of the difference-frequency wave loads and the resulting motions of the floater.

17 WIND ENERGY↗
NASA NTRS1995

Solar cycle dependence of the sun's radius at lambda = 525.0 nm

The Mount Wilson (California) synoptic program of solar magnetic observations scans the solar disk between 1 and 20 times per day. As part of this program, the radius is determined as an average distance between the image center and the point where the intensity in the FeI line at lambda = 525.0 nm drops to 25 percent of its value at the disk's center. The data base of information was analyzed and corrected for effects such as scattered light and atmospheric reflection. The solar variability and the measurement techniques are described. The observation data sets, the corrections made to the data, and the observed variations, are discussed. It is stated that similar spectral lines at lambda = 525.0 nm, which are common in the solar spectrum, probably exhibit similar radius changes. All portions of the sun are weighted equally so that it is concluded that, within spectral lines, the radiating area of the sun is increased at the solar maximum.

Ulrich, Roger K.↗
DOE OSTI2025

Validation of 3D cryoEM single-particle reconstruction correctness and handedness with Ewald's sphere correction

The correct description of quantum scattering places the observed scattering contributions on the Ewald's sphere and its Friedel mate copy. In electron microscopy, due to the large radius of the Ewald's sphere, these scattering contributions are typically merged during data analysis. We present an approach that separates and factorizes those contributions into real and imaginary components of the image. When an inverted solution is calculated, the map derived from the real component of the image generates an inverted solution, while the map derived from the imaginary component of the image generates an inverted and sign-flipped solution. Therefore, the sign of correlation between reconstructions derived from the real and imaginary components provides the automatic determination of handedness and additional validation for the quality of 3D reconstructions. The factorization and its implementation are robust enough to be routinely used in single-particle reconstructions, even at resolutions below the limit where the curvature of the Ewald's sphere affects the overall signal-to-noise ratio.

Chemistry↗
NASA NTRS1960

The Atmosphere and Haze of Mars

The 'blue haze' is an absorbing smoke, dark as soot in reflection, red in transmission. Its currently accepted explanation by pure scattering (omnidirectional or forward) is untenable, as it would either increase the surface brightness of fall to obscure the surface details. The limb darkening of Mars is mainly the results of absorption by the smoke. The opacity of the Martian atmosphere increases from the red toward the violet. The extinction by the Martian atmosphere is greater than that by the terrestrial at all wavelengths, but only about 20 per cent of the Martian extinction is due to scattering. Dollfus' polarimeteric estimate, corrected for self-absorption, corresponds to a martian atmospheric pressure of 87 mm Hg. The photochemical breakup of carbon dioxide and the escape of oxygen must lead to considerable concentrations of carbon monoxide in the martian atmosphere.

HAZE↗
NASA NTRS1979

Tropospheric UV flux calculations and photolysis rates for use with zonally and diurnally averaged models

A computationally fast and efficient method for calculating solar UV fluxes in the troposphere is developed. Calculated fluxes compare favorably with more rigorous multiple scattering results, and qualitatively correct behavior of the direct and diffuse flux components is maintained. In view of the relatively large uncertainties in other aspects of tropospheric photochemical models, the use of approximate UV flux calculations appears warranted. The technique is applied to the calculation of photolysis rates for twelve significant photolytic reactions of nine species.

Matloff, G. L.↗
NASA NTRS1981

A comparison of observed and analytically derived remote sensing penetration depths for turbid water

The depth to which sunlight will penetrate in turbid waters was investigated. The tests were conducted in water with a single scattering albedo range, and over a range of solar elevation angles. Two different techniques were used to determine the depth of light penetration. It showed little change in the depth of sunlight penetration with changing solar elevation angle. A comparison of the penetration depths indicates that the best agreement between the two methods was achieved when the quasisingle scattering relationship was not corrected for solar angle. It is concluded that sunlight penetration is dependent on inherent water properties only.

Morris, W. D.↗
NASA NTRS1992

Verification measurement of a polarization Raman elastic-backscatter lidar

By measuring the depolarization of light Raman scattered from a gas of known number density (nitrogen), it is possible to determine the influence of multiple scattering on lidar signals. In order to realize such measurements, linearly polarized laser light is emitted and two components of the nitrogen Raman signals, with E vectors parallel (parallel P sub lambda R) and perpendicular (perpendicular P sub lambda R) to the plane of polarization of the laser light, are measured. The depolarization ratio, delta sub lambda R = perpendicular P sub lambda R/parallel P sub lambda R, is constant if only the Raman scattering process contributes to the signal. Any variation of the depolarization is caused by additional elastic, and, thus, multiple scattering. If the contribution of multiple scattered light to the lidar signals is known, other parameters determined with the systems such as extinction, backscattering, and the depolarization of elastically scattered light, can be corrected for this influence. The lidar system used for the polarization measurements, especially the receiver setup, is described. The calibration of the apparatus and a clear air measurement are discussed.

Schulze, Christoph↗
NASA NTRS1995

Alfven waves, alpha particles, and pickup ions in the solar wind

Past studies of the properties of Alfven waves in the solar wind have indicated that (1) the amplitude of the velocity fluctuations is almost always smaller than expected on the basis of the amplitude of the field fluctuations, even when the anisotropy of the plasma is taken into account, and (2) the alpha particles do not participate in the wave motions because they 'surf' on the waves carried by the proton fluid. Ulysses data are used to demonstrate that (1) the discrepancy between the velocity and field fluctuations is greater at high heliographic latitudes than in the ecliptic plane, and (2) the alphas do participate in the waves, being either in phase or out of phase with the proton motions depending on whether the differential flow speed between the alphas and protons is greater than or less than the 'observed' wave speed, B(sub o)(delta v squared / delta B squared)exp 1/2, as determined from the ratio of the amplitudes of the velocity and magnetic fluctuations. It is proposed that the modification of Alfven wave propagation speed is due to pressure anisotropies resulting from asymmetric distributions of interstellar pickup ions. If the proposed explanation is correct, it indicates that scattering of pickup ions onto a (bi)spherical shell may not be as complete as generally supposed.

Goldstein, B. E.↗