Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

SAS 2 observations of the earth albedo gamma radiation above 35 MeV

The earth albedo gamma radiation above 35 MeV in the equatorial region is investigated using observations from the second Small Astronomy Satellite. The zenith angle distribution of the gamma radiation has a peak toward the horizon which is about an order of magnitude more intense than the radiation coming from the nadir, and nearly two orders of magnitude more intense than the gamma radiation from most parts of the sky. The gamma radiation originating from the western horizon is a factor of four more intense than the radiation from the eastern horizon and a factor of three more intense than that from the northern and southern directions. This reflects the geomagnetic effects on the incident cosmic rays whose interactions produce the albedo gamma rays. The variation of the upcoming gamma ray intensity with vertical cutoff rigidity is consistent with the empirical relationship found by Gur'yan et al. (1979).

Thompson, D. J.↗

SAS 3 observations of Cygnus X-1 - The intensity dips

In general, the dips are observed to occur near superior conjunctions of the X-ray source, but one pair of 2-minute dips occurs when the X-ray source is closer to the observer than is the supergiant companion. The dips are analyzed spectrally with the aid of seven energy channels in the range 1.2-50 keV. Essentially, there is no change in the spectral index during the dips. Reductions in the count rates are observed at energies exceeding 6 keV for some of the dips, but the dip amplitude is always significantly greater in the 1.2-3 keV band. It is believed that absorption by partially ionized gas may best explain these results, since the observations of Pravdo et al. (1980) rule out absorption by unionized material. Estimates for the intervening gas density, extent, and distance from the X-ray source are presented. Attention is also given to the problems confronting the models for the injection of gas through the line of sight, believed to be inclined by approximately 30 deg from the binary pole.

Remillard, R. A.↗

Supplier Assessment System (SAS)

Background: Sponsored by NASA Headquarters; Charter - provide information to assist the quality assurance community in evaluating and determining supplier risk; Comprehensive on-line repository of supplier information; Available to approved civil service personnel from all NASA Centers, other U.S. Government Agencies, Prime Contractors, and NASA direct support contractors; User access to specific data types or documents is controlled as needed.

Dietrich, Kristen↗

Nanni in the SAS-2 Era

Explore the source record for details and available documents.

Dave Thompson↗

Enhancing the inherent catalytic activity and stability of TiO 2 supported Pt single-atoms at CeO x –TiO 2 interfaces

Single-atoms (SAs) with atomically coordinated reaction centers are considered the next generation of catalysts that can exhibit exceptional catalytic efficiency. However, the general concern about thermodynamic vulnerabilities of SAs questions their practical value. Moreover, whether the inherent catalytic nature of SAs is superior compared with that of larger nanoparticles is still under debate. Here, we address two controversies by a comparative study using two catalysts: Pt/TiO 2 and Pt/CeO x –TiO 2 . Based on a hierarchical study of density functional theory, time-resolved catalysis performance test, in situ infrared spectroscopy, and operando X-ray absorption spectroscopy, we could unveil the catalytic nature of Pt-SAs and their stability. By utilizing the heterogeneous interface formed between TiO 2 supporting particles and CeO x clusters formed on the surface of TiO 2 , we preferentially synthesized Pt-SAs pinned at the CeO x –TiO 2 interfaces on CeO x –TiO 2 hybrid-oxide supports. The strong electronic coupling between the Pt-SAs and the Ce ions at the CeO x –TiO 2 interfaces enhanced the catalytic activity toward CO oxidation of Pt-SAs and improved the long-term stability under CO oxidation conditions. The CO oxidation activity of Pt-SAs stabilized at CeO x –TiO 2 was improved by 13.5 times at 200 °C compared with the Pt-SAs on TiO 2 . The results present how to easily improve the activity and stability of Pt-SAs using a simple interface control method. Moreover, we demonstrate that the catalytic activity and the stability of Pt-SAs can be monitored through the chemical state of the interfaces. Finally, our study provides comprehensive understanding about the catalytic nature as well as a novel strategy toward applications of Pt-SAs, enabling sustainable use of Pt in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biological Small Angle Scattering: Techniques, Strategies and Tips

This book provides a clear, comprehensible and up-to-date description of how Small Angle Scattering (SAS) can help structural biology researchers. SAS is an efficient technique that offers structural information on how biological macromolecules behave in solution. SAS provides distinct and complementary data for integrative structural biology approaches in combination with other widely used probes, such as X-ray crystallography, Nuclear magnetic resonance, Mass spectrometry and Cryo-electron Microscopy. The development of brilliant synchrotron small-angle X-ray scattering (SAXS) beam lines has increased the number of researchers interested in solution scattering. SAS is especially useful for studying conformational changes in proteins, highly flexible proteins, and intrinsically disordered proteins. Small-angle neutron scattering (SANS) with neutron contrast variation is ideally suited for studying multi-component assemblies as well as membrane proteins that are stabilized in surfactant micelles or vesicles. SAS is also used for studying dynamic processes of protein fibrillation in amyloid diseases, and pharmaceutical drug delivery. The combination with size-exclusion chromatography further increases the range of SAS applications.The book is written by leading experts in solution SAS methodologies. The principles and theoretical background of various SAS techniques are included, along with practical aspects that range from sample preparation to data presentation for publication. Topics covered include techniques for improving data quality and analysis, as well as different scientific applications of SAS. With abundant illustrations and practical tips, we hope the clear explanations of the principles and the reviews on the latest progresses will serve as a guide through all aspects of biological solution SAS.The scope of this book is particularly relevant for structural biology researchers who are new to SAS. Advanced users of the technique will find it helpful for exploring the diversity of solution SAS methods and applications.

Chaudhuri, Barnali↗

New era of molecular structure and dynamics from solution scattering experiments

Six contributions in this special issue of Biopolymers are devoted to the application of small angle scattering (SAS) to biological macromolecules. Biological applications of SAS have undergone a resurgence in the last 15 years. Although SAS cannot compete with the atomic level information provided by crystallographic and NMR-based methods, nonetheless SAS has advantages that make it an extremely useful component in the structural biologist's tool box. An obvious reason for the renewed popularity of scattering experiments is the increased access to SAS beamlines at synchrotron X-ray sources. These high intensity sources greatly reduce the sample requirements and accelerate data acquisition. However, improved access only partially explains the resurgence of SAS. As highlighted in the six papers in this special issue, creative applications of SAS are opening up new avenues for studying biological macromolecules which are not readily investigated using other structural methods. SAS excels at characterizing the global dimensions and shape of individual molecules, molecular complexes and even disordered states, particularly as a function of solvent condition and time, and can do so in a high throughput manner. In addition, SAS can provide information about the dynamics of molecular complexes in solution. These capabilities are highlighted in this special issue which illustrates how SAS is both a versatile technique in its own right and, when combined with other methods, capable of producing a more complete description of the conformational changes and dynamics of complicated biological processes.

36 MATERIALS SCIENCE↗

Extension of the sasCIF format and its applications for data processing and deposition

Recent advances in small-angle scattering (SAS) experimental facilities and data analysis methods have prompted a dramatic increase in the number of users and of projects conducted, causing an upsurge in the number of objects studied, experimental data available and structural models generated. To organize the data and models and make them accessible to the community, the Task Forces on SAS and hybrid methods for the International Union of Crystallography and the Worldwide Protein Data Bank envisage developing a federated approach to SAS data and model archiving. Within the framework of this approach, the existing databases may exchange information and provide independent but synchronized entries to users. At present, ways of exchanging information between the various SAS databases are not established, leading to possible duplication and incompatibility of entries, and limiting the opportunities for data-driven research for SAS users. In this work, a solution is developed to resolve these issues and provide a universal exchange format for the community, based on the use of the widely adopted crystallographic information framework (CIF). The previous version of the sasCIF format, implemented as an extension of the core CIF dictionary, has been available since 2000 to facilitate SAS data exchange between laboratories. The sasCIF format has now been extended to describe comprehensively the necessary experimental information, results and models, including relevant metadata for SAS data analysis and for deposition into a database. Processing tools for these files ( sasCIFtools ) have been developed, and these are available both as standalone open-source programs and integrated into the SAS Biological Data Bank, allowing the export and import of data entries as sasCIF files. Software modules to save the relevant information directly from beamline data-processing pipelines in sasCIF format are also developed. Lastly, this update of sasCIF and the relevant tools are an important step in the standardization of the way SAS data are presented and exchanged, to make the results easily accessible to users and to promote further the application of SAS in the structural biology community.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Simulation of the Summer Monsoon Rainfall over East Asia using the NCEP GFS Cumulus Parameterization at Different Horizontal Resolutions

The most recent version of Simplified Arakawa-Schubert (SAS) cumulus scheme in National Center for Environmental Prediction (NCEP) Global Forecast System (GFS) (GFS SAS) has been implemented into the Weather and Research Forecasting (WRF) model with a modification of triggering condition and convective mass flux to become depending on model’s horizontal grid spacing. East Asian Summer Monsoon of 2006 from June to August is selected to evaluate the performance of the modified GFS SAS scheme. Simulated monsoon rainfall with the modified GFS SAS scheme shows better agreement with observation compared to the original GFS SAS scheme. The original GFS SAS scheme simulates the similar ratio of subgrid-scale precipitation, which is calculated from a cumulus scheme, against total precipitation regardless of model’s horizontal grid spacing. This is counter-intuitive because the portion of resolved clouds in a grid box should be increased as the model grid spacing decreases. This counter-intuitive behavior of the original GFS SAS scheme is alleviated by the modified GFS SAS scheme. Further, three different cumulus schemes (Grell and Freitas, Kain and Fritsch, and Betts-Miller-Janjic) are chosen to investigate the role of a horizontal resolution on simulated monsoon rainfall. The performance of high-resolution modeling is not always enhanced as the spatial resolution becomes higher. Even though improvement of probability density function of rain rate and long wave fluxes by the higher-resolution simulation is robust regardless of a choice of cumulus parameterization scheme, the overall skill score of surface rainfall is not monotonically increasing with spatial resolution.

CPS↗

Design Principles of Single Atoms on Carbons for Lithium–Sulfur Batteries

The study of lithium-sulfur (Li-S) batteries has generated various rationally designed cathodes and modified separators. However, the shuttle of soluble lithium polysulfides (LiPSs) and the sluggish kinetics of transformation of LiPSs to Li2S2/Li2S still hinder the achievement of long-life cycling and high-rate of Li-S batteries. Even though several kinds of nanocatalysts have been studied, the catalytic effects for Li-S batteries are not ideal. Single atoms (SAs) with high surface free energy are found to serve as both anchoring and electrocatalytic centers for LiPSs. Furthermore, atomically dispersed metal catalyst on carbon provide conductive and flexible host for dielectric sulfur. Moreover, SAs as the uniform lithiophilic sites can reduce the nucleation overpotential and ensure uniformly plating of Li. In this review, the latest strategies for preparation of SAs supported on carbons are provided on the application of Li-S batteries, including cathode, modified separator and Li metal anode. In addition, it also discusses how SAs with high catalytic activity can help build better Li-S batteries and the design principles for SAs. Finally, the future directions of SAs in energy storage applications is proposed.

25 ENERGY STORAGE↗

Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

Scale-adaptive simulation (SAS) of the transient gas–liquid two-phase flow in a laboratory-scale continuous-casting mold is presented. The main objective is to investigate the applicability of the scale-adaptive unsteady Reynolds-averaged Navier–Stokes turbulent model (URANS SAS) for predicting the transient multiscale turbulent structures in a two-phase flow. Good quantitative agreements with the experimental data and the large eddy simulation (LES) results are obtained both for the time-averaged velocity field and for the transient turbulent characteristics. The introduction of the von Karman length-scale into the turbulence-scale equation allows the SAS model to dynamically adjust to the resolved turbulent structures. The LES-like pulsating behavior of the air gas and the large-scale liquid eddy magnitudes in the unsteady regions of flow field are captured by the SAS model. The classical − 5/3 law of power spectrum density (PSD) of the axial velocity is kept properly for the single-phase turbulent flow. For two-phase flow, the decay of PSD is too steep at the high-frequency region; the predicted PSD obtained with SAS is damped stronger than that estimated by LES. The SAS model offers an attractive alternative to the existing LES approach or to the other hybrid RANS/LES models for strongly unsteady flows.

36 MATERIALS SCIENCE↗

Hemispheric sunspot unit area: comparison with hemispheric sunspot number and sunspot area

The monthly mean northern and southern hemispheric sunspot numbers (SNs) and sunspot areas (SAs) in the time interval of 1945 January to 2012 December are utilized to construct the monthly northern and southern hemispheric sunspot unit areas (SUAs), which are defined as the ratio of hemispheric SA to SN. Hemispheric SUAs are usually found to rise at the beginning and to fall at the ending time of a solar cycle more rapidly, forming a more irregular cycle profile than hemispheric SNs and SAs, although it also presents Schwabe-cycle-like hemispheric SNs and SAs. Sunspot activity (SN, SA, and SUA) is found asynchronously and is asymmetrically distributed in the northern and southern hemispheres, and hemispheric SNs, SAs, and SUAs are not in phase in the two hemispheres. The similarity of hemispheric SNs and SAs is found to be much more obvious than that of hemispheric SUAs and SNs (or SAs), and also for their north-south asymmetry. A notable feature is found for the behavior of the SUA around the minimum time of cycle 24: the SUA rapidly decreases from the cycle maximum value to the cycle minimum value of sunspot cycles 19-24 within just 22 months.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting tungsten erosion and leakage properties for the new V-shaped small angle slot divertor in DIII-D

Impurity transport modeling of the new tungsten (W)-coated, V-shaped small angle slot (SAS) divertor in the DIII-D tokamak was conducted using the SOLPS-ITER plasma edge code package and the DIVIMP impurity tracking code. The inboard baffle of the current SAS divertor will be shifted closer to the outboard baffle, creating a V-corner at the slot vertex. In addition, the outboard baffle will be coated with 10–15 μm of W for experiments studying high-Z sourcing and leakage in a closed divertor. Modeling of the 'SAS-VW' divertor predicts that these changes to the inner baffle will reduce W gross erosion by 40× relative to the existing SAS divertor when the outer strike point (OSP) is at the V-corner and the ion B × ∇B drift is towards the divertor, driven primarily by significant cooling near the slot vertex. Most W erosion in SAS-VW is expected to occur near the slot entrance, which may pose a higher risk to core contamination than W eroded deeper in the slot. Furthermore, adding a new sheath-based prompt redeposition model increases the sensitivity of redeposition estimates to near-target plasma conditions and may provide more accurate predictions of net erosion. Moving the OSP outboard from the slot vertex ~4 cm onto the W-coated region yields a 40× increase in the gross erosion rate and a 50% decrease in the core leakage fraction. Thus slight variations in strike point location may counteract the potential benefits of the tightly-baffled V slot on minimizing erosion. This impurity transport modeling provides useful guidance for future experiments on the SAS-VW divertor focused on high-Z erosion/redeposition, scrape-off layer transport, and core leakage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Materials Data on AsS by Materials Project

SAs crystallizes in the triclinic P1 space group. The structure is one-dimensional and consists of two arsenic compounds molecules; one As4S3 cluster; one SAs cluster; one SSAs cluster; one As3S4 ribbon oriented in the (1, 0, 0) direction; and two SAs ribbons oriented in the (1, 0, 0) direction. In the As4S3 cluster, there are four inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.26 Å) and one longer (2.27 Å) As–S bond lengths. In the second As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.28 Å. In the third As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.28 Å) and one longer (2.29 Å) As–S bond lengths. In the fourth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.26 Å. There are three inequivalent S2- sites. In the first S2- site, S2- is bonded in a 3-coordinate geometry to two As2+ atoms. In the second S2- site, S2- is bonded in a bent 120 degrees geometry to two As2+ atoms. In the third S2- site, S2- is bonded in a bent 120 degrees geometry to two As2+ atoms. In the SAs cluster, there are two inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.31 Å. In the second As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.32 Å. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in a distorted water-like geometry to one As2+ and one S2- atom. The S–S bond length is 2.09 Å. In the second S2- site, S2- is bonded in a distorted water-like geometry to one As2+ and one S2- atom. In the SSAs cluster, there are two inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.30 Å) and one longer (2.35 Å) As–S bond lengths. In the second As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.29 Å) and one longer (2.35 Å) As–S bond lengths. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the second S2- site, S2- is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.05 Å) and one longer (2.06 Å) S–S bond lengths. In the third S2- site, S2- is bonded in a distorted water-like geometry to one As2+ and one S2- atom. In the fourth S2- site, S2- is bonded in a distorted water-like geometry to one As2+ and one S2- atom. In the As3S4 ribbon, there are three inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.25–2.36 Å. In the second As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.26 Å) and one longer (2.33 Å) As–S bond lengths. In the third As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.28 Å. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in a distorted water-like geometry to one As2+ and one S2- atom. The S–S bond length is 2.04 Å. In the second S2- site, S2- is bonded in a distorted water-like geometry to one As2+ and one S2- atom. In the third S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fourth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In one of the SAs ribbons, there are five inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.26 Å) and one longer (2.30 Å) As–S bond lengths. In the second As2+ site, As2+ is bonded in a 3-coordinate geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.11–2.86 Å. In the third As2+ site, As2+ is bonded in a distorted T-shaped geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.28–2.32 Å. In the fourth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.31 Å. In the fifth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.28 Å. There are five inequivalent S2- sites. In the first S2- site, S2- is bonded in a single-bond geometry to one As2+ atom. In the second S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the third S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fourth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fifth S2- site, S2- is bonded in a 3-coordinate geometry to three As2+ atoms. In one of the SAs ribbons, there are six inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.31 Å. In the second As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.27 Å) and one longer (2.34 Å) As–S bond lengths. In the third As2+ site, As2+ is bonded in a distorted trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.28–2.33 Å. In the fourth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.27 Å. In the fifth As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.25 Å) and one longer (2.27 Å) As–S bond lengths. In the sixth As2+ site, As2+ is bonded in a trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.28–2.30 Å. There are six inequivalent S2- sites. In the first S2- site, S2- is bonded in a bent 120 degrees geometry to two As2+ atoms. In the second S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the third S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fourth S2- site, S2- is bonded in a bent 120 degrees geometry to two As2+ atoms. In the fifth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the sixth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms.

36 MATERIALS SCIENCE↗