Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum wells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Photonic Crystal Surface Emitting GaSb-Based Type-I Quantum Well Diode Lasers

The GaSb-based epitaxially regrown monolithic diode PCSELs operating near 2 μm at room temperature in continuous wave regime and generating 30 mW of output power from 200 μm diameter aperture have been designed and fabricated. Here, the devices demonstrated CW threshold current density of about 500 A/cm 2 . The laser output power was enhanced thanks to increased buried void area fill-factor in the photonic crystal layer with multiple voids per unit cell. The PCSEL generated ultra-low divergence donut shape beams at the currents near threshold. At higher injection currents, the device brightness was limited by excitation of the higher order lateral modes. Generation of the vector-vortex beams of different types by different band edge states of the buried photonic crystal was observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗
DOE OSTI2024

Planarization of p -GaN surfaces on MOCVD grown V-defect engineered GaN-based LEDs

The large polarization barriers between the quantum wells and quantum barriers in long-wavelength GaN-based light-emitting diodes (LEDs) inhibit their performance by requiring excess driving voltages to reach standard operating current densities. Lateral injection of carriers directly into quantum wells is required to circumvent this issue. V-defects are naturally occurring inverted hexagonal defects with semipolar {$10\bar{1}1$}-plane sidewalls generated on surface depressions from threading dislocations. LEDs engineered to intentionally generate V-defects below the active region of the LED can achieve lateral carrier injection through the V-defect sidewalls and have already been able to demonstrate world record wall-plug efficiencies for LEDs in the green-red wavelengths. V-defects can be enlarged during kinetically limited growth where the growth rate of the c-plane GaN is faster than that of their sidewalls, leaving them unfilled. We report on the metal organic chemical vapor deposition growth conditions required to fill in V-defects with p-GaN during epitaxial growth of the LED post the active region. Circular transmission length measurements of Pd/Au contacts processed on p-GaN surfaces with various amounts of unfilled V-defects showed no significant difference in their sheet resistance and specific contact resistance. J–V measurements of LEDs grown with varying unfilled V-defect densities showed no significant difference in the forward bias regime. However, in the reverse bias regime, catastrophic breakdown occurred at markedly lower voltages for samples with larger unfilled V-defect densities. This suggests that unfilled V-defects may act as hotspots for device failure, and planarizing LED surfaces may help prevent early degradation of LED devices.

Chemical vapor deposition↗
DOE OSTI2021

Artificial High-Transition Temperature Superconductors

In this work, we have used the well-understood quantum Hall (QH) stripes in high quality two-dimensional electron gases to mimic charge stripes in high transition temperature (Tc) superconductors. The science question we want to address is “Can QH stripes mimic high Tc superconductor stripes and provide a controlled experimental setup to pin-down the role of stripes in high Tc superconductivity?”. We have observed anomalous superconducting transition like behavior in GaAs double quantum well systems (DQWs) when each quantum well (QW) is tuned to the charge stripe states but with different Landau level fillings. Furthermore, we have shown that the transition like behavior is sharper in the DQWs when the two QWs are more strongly coupled. Our results suggest, for the first time, experimental evidence of the paired charge stripes model, which might lead to room-temperature superconductors that have enormously wide applications in computing, energy, and transportation industries. Advancing the science of high transition temperature superconductivity will have a profound impact in advancing energy technologies, ranging from the next generation microchips, new energy transfer grid to public transportation, and thus is important to nation’s energy security and relevant across the landscape of many mission spaces. Sandia has been a leader in materials science research and development. The proposed research takes advantage of Sandia’s state-ofthe-art MBE facilities at the Center for Integrated Nanotechnologies (CINT) and utilizes Sandia’s extensive advanced materials characterization resources. We envision a significant impact on the nation’s energy research and security challenges by investing in this research.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design tradeoffs between traditional hexagonal and emerging cubic In X Ga (1–X) N/GaN-based green light-emitting diodes

Here, we report on the design tradeoffs between traditional hexagonal and emerging cubic In X Ga (1–X) N/GaN -based green (520 nm≤ λ ≤550 nm) light-emitting diodes with special emphasis on the electron blocking layer, number of quantum wells, and thicknesses of quantum wells and barriers. We identified three crucial design rules for cubic green light-emitting diodes: (1) no need for an electron blocking layer; (2) use of a wide quantum well; and (3) choice of thin quantum barriers in multi-quantum well light-emitting diode designs. These design rules increase the internal quantum efficiency of cubic green light-emitting diodes by ~30.5% under 100A/cm 2 injection with respect to traditional designs. Overall, the design rules of cubic light-emitting diodes and their differentiating nature from the traditional, hexagonal ones are crucial for the advent of next-generation cubic light-emitting diodes.

42 ENGINEERING↗