Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Analytical model of a transversely diode-pumped alkali metal vapour laser

The previously presented analytical model of a transversely diode-pumped alkali metal vapour laser (A.I. Parkhomenko, A.M. Shalagin, Quantum Electronics , 2015, Vol. 45, No. 9, pp 797 – 806) is refined and expanded. Analytical formulas are derived describing the operation of a high-intensity laser at an almost arbitrary buffer gas pressure and taking into account radiation losses in the resonator. Comparison of the results of calculations of the laser energy characteristics by analytical formulas with the results of numerical calculations of other authors shows very good agreement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combinatorial chemical bath deposition of CdS contacts for chalcogenide photovoltaics

Contact layers play an important role in thin film solar cells, but new material development and optimization of its thickness is usually a long and tedious process. A high-throughput experimental approach has been used to accelerate the rate of research in photovoltaic (PV) light absorbers and transparent conductive electrodes, however the combinatorial research on contact layers is less common. Here, we report on the chemical bath deposition (CBD) of CdS thin films by combinatorial dip coating technique and apply these contact layers to Cu(In,Ga)Se 2 (CIGSe) and Cu 2 ZnSnSe 4 (CZTSe) light absorbers in PV devices. Combinatorial thickness steps of CdS thin films were achieved by removal of the substrate from the chemical bath, at regular intervals of time, and in equal distance increments. The trends in the photoconversion efficiency and in the spectral response of the PV devices as a function of thickness of CdS contacts were explained with the help of optical and morphological characterization of the CdS thin films. The maximum PV efficiency achieved for the combinatorial dip-coating CBD was similar to that for the PV devices processed using conventional CBD. Finally, the results of this study lead to the conclusion that combinatorial dip-coating can be used to accelerate the optimization of PV device performance of CdS and other candidate contact layers for a wide range of emerging absorbers.

14 SOLAR ENERGY↗

A new experiment to test parity symmetry in cold chiral molecules using vibrational spectroscopy

We present a brief review of our progress towards measuring parity violation in heavy-metal chiral complexes using mid-IR Ramsey interferometry. We discuss our progress addressing the main challenges, including the development of buffer-gas sources of slow, cold polyatomic molecules, and the frequency-stabilisation of quantum cascade lasers calibrated using primary frequency standards. We report investigations on achiral test species of which promising chiral derivatives have been synthesised. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Double-buffered, heterogeneous CPU + GPU integral digestion algorithm for single-excitation calculations involving a large number of excited states

The most widely used quantum-chemical models for excited states are single-excitation theories, a category that includes configuration interaction with single substitutions, time-dependent density functional theory, and also a recently developed ab initio exciton model. When a large number of excited states are desired, these calculations incur a significant bottleneck in the “digestion” step in which two-electron integrals are contracted with density or density-like matrices. We present an implementation that moves this step onto graphical processing units (GPUs), and introduce a double-buffer scheme that minimizes latency by computing integrals on the central processing units (CPUs) concurrently with their digestion on the GPUs. An automatic code generation scheme simplifies the implementation of high-performance GPU kernels. For the exciton model, which requires separate excited-state calculations on each electronically coupled chromophore, the heterogeneous implementation described here results in speedups of 2–6× versus a CPU-only implementation. For traditional time-dependent density functional theory calculations, we obtain speedups of up to 5× when a large number of excited states is computed.

97 MATHEMATICS AND COMPUTING↗

Monolithically integrated InGaAs/GaAs/AlGaAs quantum well laser grown by MOCVD on exact Ge/Si(001) substrate

We report on realization of the InGaAs/GaAs/AlGaAs quantum well laser grown by metallorganic chemical vapor deposition on a virtual Ge-on-Si(001) substrate. The Ge buffer layer has been grown on a nominal Si(001) substrate by solid-source molecular beam epitaxy. Such Ge buffer possessed rather good crystalline quality and smooth surface and so provided the subsequent growth of the high-quality A{sub 3}B{sub 5} laser structure. The laser operation has been demonstrated under electrical pumping at 77 K in the continuous wave mode and at room temperature in the pulsed mode. The emission wavelengths of 941 nm and 992 nm have been obtained at 77 K and 300 K, respectively. The corresponding threshold current densities were estimated as 463 A/cm{sup 2} at 77 K and 5.5 kA/cm{sup 2} at 300 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of the MgO buffer layer thickness on magnetic anisotropy in MgO/Fe/Cr/MgO buffer/MgO(001)

The relationship between the magnetic properties and MgO buffer layer thickness d was studied in epitaxial MgO/Fe(t)/Cr/MgO(d) layers grown on MgO(001) substrate in which the Fe thickness t ranged from 0.4 nm to 1.1 nm. For 0.4 nm ≤ t ≤ 0.7 nm, a non-monotonic coercivity dependence on the MgO buffer thickness was shown by perpendicular magneto-optic Kerr effect magnetometry. For thicker Fe films, an increase in the buffer layer thickness resulted in a spin reorientation transition from perpendicular to the in-plane magnetization direction. Possible origins of these unusual behaviors were discussed in terms of the suppression of carbon contamination at the Fe surface and changes in the magnetoelastic anisotropy in the system. These results illustrate a method to control magnetic anisotropy in MgO/Fe/Cr/MgO(d) via an appropriate choice of MgO buffer layer thickness d.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular beam epitaxy growth of high electron mobility InAs/AlSb deep quantum well structure

InAs/AlSb deep quantum well (QW) structures with high electron mobility were grown by molecular beam epitaxy (MBE) on semi-insulating GaAs substrates. AlSb and Al{sub 0.75}Ga{sub 0.25}Sb buffer layers were grown to accommodate the lattice mismatch (7%) between the InAs/AlSb QW active region and GaAs substrate. Transmission electron microscopy shows abrupt interface and atomic force microscopy measurements display smooth surface morphology. Growth conditions of AlSb and Al{sub 0.75}Ga{sub 0.25}Sb buffer were optimized. Al{sub 0.75}Ga{sub 0.25}Sb is better than AlSb as a buffer layer as indicated. The sample with optimal Al{sub 0.75}Ga{sub 0.25}Sb buffer layer shows a smooth surface morphology with root-mean-square roughness of 6.67 A. The electron mobility has reached as high as 27 000 cm{sup 2}/Vs with a sheet density of 4.54 Multiplication-Sign 10{sup 11}/cm{sup 2} at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of the quantum-confined Stark effect in Al{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N corrugated quantum wells

We report comparative studies of 6-nm-thick Al{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N pyroelectric quantum wells (QWs) grown by plasma-assisted molecular beam epitaxy on c-sapphire substrates with a thick AlN buffer deposited under different growth conditions. The Al-rich growth conditions result in a 2D growth mode and formation of a planar QW, whereas the N-rich conditions lead to a 3D growth mode and formation of a QW corrugated on the size scale of 200–300 nm. Time-resolved photoluminescence (PL) measurements reveal a strong quantum-confined Stark effect in the planar QW, manifested by a long PL lifetime and a red shift of the PL line. In the corrugated QW, the emission line emerges 200 meV higher in energy, the low-temperature PL lifetime is 40 times shorter, and the PL intensity is stronger (∼4 times at 4.5 K and ∼60 times at 300 K). The improved emission properties are explained by suppression of the quantum-confined Stark effect due to the reduction of the built-in electric field within the QW planes, which are not normal to the [0001] direction, enhanced carrier localization, and improved efficiency of light extraction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of Ni{sub 2}-Mn-Ga phase formation by magnetron sputtering film deposition at low temperature onto Si substrates and LaNiO{sub 3}/Pb(Ti,Zr)O{sub 3} buffer

Film deposition of Ni{sub 2}MnGa phaselike alloy by radio frequency (rf) magnetron sputtering was performed onto bare Si(100) substrates and LaNiO{sub 3}/Pb(Ti,Zr)O{sub 3} (LNO/PZT) ferroelectric buffer layer near room temperature. The prepared samples were characterized using conventional x-ray diffraction (XRD), superconducting quantum interference device, and electron dispersive x-ray spectroscopy from scanning electron microscope observations. The optimized films deposited under high rf power and low argon pressure present good surface quality and highly textured phase crystallization. The positioning distance between the substrate and the target-holder axis has some limited effect on the film's composition due to the specific diffusion behavior of each element in the sputtering plasma. Extended four pole high resolution XRD analysis allowed one to discriminate the intended Ni-Mn-Ga tetragonal martensitic phase induced by the (100) LNO/PZT oriented buffer. This low temperature process appears to be very promising, allowing separate control of the functional layer's properties, while trying to achieve high electromagnetoelastic coupling.

36 MATERIALS SCIENCE↗

Stimulated Emission in the 1.3–1.5 μm Spectral Range from AlGaInAs Quantum Wells in Hybrid Light-Emitting III–V Heterostructures on Silicon Substrates

Hybrid laser structures with AlGaInAs quantum wells are grown by metalorganic vapor phase epitaxy on Ge/Si(100) “virtual” substrates using GaAs and InP buffer layers. Stimulated emission is achieved under optical pumping of the prepared samples in the range of 1.3–1.5 μm at liquid-nitrogen temperature. The stimulated-emission threshold is 30–70 kW/cm{sup 2}.

36 MATERIALS SCIENCE↗

High-resolution laser-induced fluorescence spectroscopy of 28 Si 16 O + and 29 Si 16 O + in a cryogenic buffer-gas cell

Here, the electronic, laser-induced fluorescence spectrum of the B 2 Σ + ← X 2 Σ + transition in 28 Si 16 O + and 29 Si 16 O + has been recorded in a cryogenic buffer gas cell at K. Molecular constants are extracted for both 28 Si 16 O + and 29 Si 16 O + , including the Fermi contact hyperfine constant for both the B and X states of 29 Si 16 O + , and used in a discussion of the suitability of SiO in future quantum information experiments.

47 OTHER INSTRUMENTATION↗

Effect of interfacial layer on the crystal structure of InAs/AlAs{sub 0.16}Sb{sub 0.84}/AlSb quantum wells

Ion channeling technique using MeV C{sup 2+} ions and high resolution X-ray diffraction were used to study the crystal quality of an InAs/AlSb-based quantum wells. We found that the InAs quality has a strong dependence on the type of the interface used. With the addition of the InSb-like interface, the crystal quality of the InAs channel was greatly improved. The InAs lattice was fully strained and aligned with the lattice of the buffer layer without any lattice relaxation. On the other hand, if the interface was of the AlAs type, the lattice of the InAs quantum well was relaxed and the crystal quality was poor. This explains why a superior InAs quantum well with high electron mobility and good surface morphology can be achieved with the use of the InSb interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Fast Parallel Algorithm for Selected Inversion of Structured Sparse Matrices with Application to 2D Electronic Structure Calculations

We present an efficient parallel algorithm and its implementation for computing the diagonal of $H^-1$ where $H$ is a 2D Kohn-Sham Hamiltonian discretized on a rectangular domain using a standard second order finite difference scheme. This type of calculation can be used to obtain an accurate approximation to the diagonal of a Fermi-Dirac function of $H$ through a recently developed pole-expansion technique \cite{LinLuYingE2009}. The diagonal elements are needed in electronic structure calculations for quantum mechanical systems \citeHohenbergKohn1964, KohnSham 1965,DreizlerGross1990. We show how elimination tree is used to organize the parallel computation and how synchronization overhead is reduced by passing data level by level along this tree using the technique of local buffers and relative indices. We analyze the performance of our implementation by examining its load balance and communication overhead. We show that our implementation exhibits an excellent weak scaling on a large-scale high performance distributed parallel machine. When compared with standard approach for evaluating the diagonal a Fermi-Dirac function of a Kohn-Sham Hamiltonian associated a 2D electron quantum dot, the new pole-expansion technique that uses our algorithm to compute the diagonal of $(H-z_i I)^-1$ for a small number of poles $z_i$ is much faster, especially when the quantum dot contains many electrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Zero lattice mismatch and twin-free single crystalline ScN buffer layers for GaN growth on silicon

We report the growth of thin ScN layers deposited by plasma-assisted molecular beam epitaxy on Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111) substrates. Using x-ray diffraction, Raman spectroscopy, and transmission electron microscopy, we find that ScN films grown at 600 °C are single crystalline, twin-free with rock-salt crystal structure, and exhibit a direct optical band gap of 2.2 eV. A high degree of crystalline perfection and a very good lattice matching between ScN and GaN (misfit < 0.1%) makes the ScN/Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3} buffer system a very promising template for the growth of high quality GaN layers on silicon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model of the radial gas-temperature distribution in a copper bromide vapour laser

An analytic model is proposed to calculate the buffer-gas temperature in the discharge-tube cross section of the copper bromide vapour laser. The model is the generalisation of the previous models developed by the authors. Assuming that the volume electric power is arbitrary distributed over the tube radius, the general solution of the quasi-stationary heat conduction equation with the boundary conditions of the first and second kinds is presented. Application of the model is considered by the example of a copper bromide vapour laser emitting at 510.6 and 578.2 nm at different specific radial distributions of the volume power. The obtained results are compared with the temperature profiles known to date. Application of this model to molecular lasers is also discussed. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High resolution InSb quantum well ballistic nanosensors for room temperature applications

We report the room temperature operation of a quasi-ballistic InSb quantum well Hall sensor that exhibits a high frequency sensitivity of 560nT/√Hz at 20uA bias current. The device utilizes a partitioned buffer layer design that suppresses leakage currents through the mesa floor and can sustain large current densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band offset at the heterojunction interfaces of CdS/ZnSnP{sub 2}, ZnS/ZnSnP{sub 2}, and In{sub 2}S{sub 3}/ZnSnP{sub 2}

Heterojunctions were formed between ZnSnP{sub 2} and buffer materials, CdS, ZnS, and In{sub 2}S{sub 3}, using chemical bath deposition. The band offset was investigated by X-ray photoelectron spectroscopy based on Kraut method. The conduction band offset, ΔE{sub C}, between ZnSnP{sub 2} and CdS was estimated to be −1.2 eV, which significantly limits the open circuit voltage, V{sub OC}. Conversely, ΔE{sub C} at the heterojunction between ZnSnP{sub 2} and ZnS was +0.3 eV, which is within the optimal offset range. In the case of In{sub 2}S{sub 3}, ΔE{sub C} was a relatively small value, −0.2 eV, and In{sub 2}S{sub 3} is potentially useful as a buffer layer in ZnSnP{sub 2} solar cells. The J−V characteristics of heterojunction diodes with an Al/sulfides/ZnSnP{sub 2} bulk/Mo structure also suggested that ZnS and In{sub 2}S{sub 3} are promising candidates for buffer layers in ZnSnP{sub 2} thin film solar cells, and the band alignment is a key factor for the higher efficiency of solar cells with heterojunctions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-density InAs/GaAs{sub 1−x}Sb{sub x} quantum-dot structures grown by molecular beam epitaxy for use in intermediate band solar cells

InAs quantum-dot structures were grown using a GaAs{sub 1−x}Sb{sub x} matrix on a GaAs(001) substrate. The use of GaAs{sub 1−x}Sb{sub x} for the buffer and cap layers effectively suppressed coalescence between dots and significantly increased the dot density. The highest density (∼3.5 × 10{sup 11}/cm{sup 2}) was obtained for a nominal 3.0 monolayer deposition of InAs with an Sb composition of x = 13–14% in the GaAs{sub 1−x}Sb{sub x} matrix. When the Sb composition was increased to 18%, the resulting large photoluminescent red shift (∼90 meV) indicated the release of compressive strain inside the quantum dots. For x > 13%, we observed a significant decrease in photoluminescence intensity and an increase in the carrier lifetime (≥4.0 ns). This is attributed to the type-II band alignment between the quantum dots and matrix material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗