Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “qualitative methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Computation of nonequilibrium radiating shock layers

A computational technique of coupling radiative transfer to fluid motion is developed for axisymmetric blunt body shock layer flows in a thermochemical nonequilibrium environment. The coupled formulation of radiation and flowfield leads to a governing set of integro-differential equations. This equation set is solved using a modified Gauss-Seidel line relaxation techniques which incorporates the inversion of full block matrix associated with radiative transfer using a block iteration method. The thermodynamic state of the gas is described by three temperatures: translational, rotational, and vibrational-electronic. Radiation phenomenon is assumed to be governed by the vibrational-electronic temperature. The radiative properties are described by a spectrally detailed model. The computations are presented for two cases, including the Fire II flight experiment. It is shown that the method converges and the calculated spectra qualitatively agree with the experimental data for the two test cases. The calculated total radiative flux underestimates the measured values owing to the low vibrational-electronic temperature predicted in the flowfield calculation.

Gokcen, Tahir↗
NASA NTRS2009

Improving the Estimates of International Space Station (ISS) Induced K-Factor Failure Rates for On-Orbit Replacement Unit (ORU) Supportability Analyses

This is a case study on revised estimates of induced failure for International Space Station (ISS) on-orbit replacement units (ORUs). We devise a heuristic to leverage operational experience data by aggregating ORU, associated function (vehicle sub -system), and vehicle effective' k-factors using actual failure experience. With this input, we determine a significant failure threshold and minimize the difference between the actual and predicted failure rates. We conclude with a discussion on both qualitative and quantitative improvements the heuristic methods and potential benefits to ISS supportability engineering analysis.

Anderson, Leif F.↗
NASA NTRS2015

Numerical Modeling of the Transient Chilldown Process of a Cryogenic Propellant Transfer Line

Before cryogenic fuel depots can be fully realized, efficient methods with which to chill down the spacecraft transfer line and receiver tank are required. This paper presents numerical modeling of the chilldown of a liquid hydrogen tank-to-tank propellant transfer line using the Generalized Fluid System Simulation Program (GFSSP). To compare with data from recently concluded turbulent LH2 chill down experiments, seven different cases were run across a range of inlet liquid temperatures and mass flow rates. Both trickle and pulse chill down methods were simulated. The GFSSP model qualitatively matches external skin mounted temperature readings, but large differences are shown between measured and predicted internal stream temperatures. Discrepancies are attributed to the simplified model correlation used to compute two-phase flow boiling heat transfer. Flow visualization from testing shows that the initial bottoming out of skin mounted sensors corresponds to annular flow, but that considerable time is required for the stream sensor to achieve steady state as the system moves through annular, churn, and bubbly flow. The GFSSP model does adequately well in tracking trends in the data but further work is needed to refine the two-phase flow modeling to better match observed test data.

Chilldown↗
NASA NTRS2015

Scale Model Acoustic Test Validation of IOP-SS Water Prediction using Loci-STREAM-VoF

The Scale Model Acoustic Test (SMAT) is a 5% scale test of the Space Launch System (SLS), which is currently being designed at Marshall Space Flight Center (MSFC). SMAT consists of a 5% scale representation of the ignition overpressure sound-suppression system (IOP-SS) that is being tested to quantify the water flow and induced air entrainment in and around the mobile launcher exhaust hole. This data will be compared with computational fluid dynamics (CFD) simulations using the newly developed Loci-STREAM Volume of Fluid (VoF) methods. Compressible and incompressible VoF methods have been formulated, and are currently being used to simulate the water flow of SMAT IOP-SS. The test data will be used to qualitatively and quantitatively assess and validate the VoF methods.

Nielsen, Tanner↗
NASA NTRS2017

Sensitivity Analysis and Uncertainty Quantification of a Mars Ascent Vehicle Concept

The design of a conceptual Mars ascent vehicle is a challenging problem. In order to aid the vehicle and mission concept design it is important to understand the driving design parameters and the expected performance in the presence of model errors and uncertainties. An existing six degree of freedom simulation model is analyzed on a statistical basis using the methods available in the Design Analysis Kit for Optimization and Terascale Applications toolkit. The methods utilized include conventional Monte Carlo techniques, metamodeling via polynomial chaos expansions, and global variance-based sensitivity analyses. Two additional analysis methods referred to as “Monte Carlo filtering” and ”Classification trees” are used to determine which uncertain parameters are driving the performance of the vehicle. Monte Carlo filtering provides a methodology to determine which parameters cause qualitatively different behavior while the classification trees use heuristics to partition the input space and assign probabilities to each partition. These methods serve as qualitative descriptors of model sensitivity while variance-based global sensitivity analysis seeks a quantitative mapping from total output variance to the variance of individual inputs. Application of these techniques to several outputs of a Mars ascent vehicle concept simulation indicates that only a select few input factors dominate their variance.

Noyes, Connor↗
NASA NTRS2005

Using Qualitative Hazard Analysis to Guide Quantitative Safety Analysis

Quantitative methods can be beneficial in many types of safety investigations. However, there are many difficulties in using quantitative m ethods. Far example, there may be little relevant data available. This paper proposes a framework for using quantitative hazard analysis to prioritize hazard scenarios most suitable for quantitative mziysis. The framework first categorizes hazard scenarios by severity and likelihood. We then propose another metric "modeling difficulty" that desc ribes the complexity in modeling a given hazard scenario quantitatively. The combined metrics of severity, likelihood, and modeling difficu lty help to prioritize hazard scenarios for which quantitative analys is should be applied. We have applied this methodology to proposed concepts of operations for reduced wake separation for airplane operatio ns at closely spaced parallel runways.

Shortle, J. F.↗
NASA NTRSDate not supplied

Measurement System Analysis of a Novel Phase-Based Ultrasonic NDE Technique for Bond Strength Measurement

Fiber reinforced polymer parts have shown tremendous benefits in aerospace structural applications, but their qualification and certification for use in safety critical areas are currently hindered by the lack of a capable non-destructive evaluation (NDE) method or technique for the inspection of these adhesively bonded parts. Conventional NDE methods and techniques typically detect gross bond defects in a qualitative (Pass/Fail) manner. These techniques struggle to detect weak or kissing bonds. Also, there are no widely adopted NDE methods or techniques for measuring interfacial bond strength or detecting kissing bonds. Bond strength is currently ensured by process control and semi-destructive testing. Results from recent research from other authors, including but not limited to mechanical testing, have shown an excellent correlation between interfacial stiffness of an adhesively bonded joint and the adhesive bond strength of that joint. In this paper, a measurement system analysis (MSA) of a novel phase-based ultrasonic NDE Technique, developed at NASA Langley Research Center, is presented for bond strength measurement to assess at an increased level the measurement process and identify components of variation in that measurement process.

Ultrasound↗
NASA NTRS1987

Performance evaluation of fault tolerant systems represented by Markov models

A method to evaluate the performance of fault tolerant systems whose configuration can be represented by time-invariant, discrete-time, discrete-state Markov models is introduced. Each state is assumed to be associated with a constant qualitative measure of the system's performance. The method first computes the moments of the performance probability mass function (PMF) and then finds an approximating function that has the same moments. The form of this function is a maximum entropy solution of the moment matching problem. A simple algorithm for calculating the necessary moments is derived and a method for finding the approximate performance PMF is suggested. After some modification, the method is applied to an example, the Inertial Upper Stage navigation system.

Missana, Jean-Olivier A. A.↗
NASA NTRS1990

Computerized tomographic imaging for space plasma physics

The measurement of plasma electron velocity distribution functions as a problem in imaging and image reconstruction is considered. A model instrument that measures the integral of the distribution function along lines in velocity space is presented. This allows the use of the powerful mathematical and numerical methods that have recently been so successful in other areas of imaging. It is found that this approach leads to classes of instruments that are qualitatively different from contemporary designs. An investigation of different methods of reconstruction of the distribution function from integral measurements reveals that the mathematical tools appropriate to one particular imaging problem may be very different from those required to deal with another.

Zhang, Yuhong↗
NASA NTRSDate not supplied

The Transition of RGB Imagery Applied to Fog and Low Clouds from NASA Capabilities within the GOES Proving Ground to the Present Era

A wide range of RGB Imagery products are now available from the GOES ABI instrument, but less than a decade earlier, these false-color imagery products were only seen over Europe and Africa within the suite of the EUMETSAT SEVIRI geostationary instrument. The issue of fog and low clouds as applied to aviation and ground transportation hazards has been a long-standing challenge where satellite imagery provides notable value to visually inspect large spatial areas vs relying on in situ point observations. A legacy channel difference product was the standard satellite imagery tool, but the Nighttime Microphysics RGB would soon be introduced with GOES-R and -S where users had no interpretation experience. As part of the GOES Proving Ground efforts, the SPoRT program utilized existing NASA LEO satellites to demonstrate the future ABI capabilities. Operational users were able to test and adopt the RGBs from NASA LEO instruments prior to the GOES-R launch in order to be ready for the wealth of new channels available from ABI. The transition experience and methods from these proxy RGBs to the start of the GOES-R ABI era to the present day provides insights to the value of these new qualitative products in operations and to how the transition method of such products can be successfully implemented as well as future needs in the RGB Imagery area.

Kevin Fuell↗
NASA NTRS1989

Error analysis for semi-analytic displacement derivatives with respect to shape and sizing variables

Sensitivity analysis is fundamental to the solution of structural optimization problems. Consequently, much research has focused on the efficient computation of static displacement derivatives. As originally developed, these methods relied on analytical representations for the derivatives of the structural stiffness matrix (K) with respect to the design variables (b sub i). To extend these methods for use with complex finite element formulations and facilitate their implementation into structural optimization programs using the general finite element method analysis codes, the semi-analytic method was developed. In this method the matrix the derivative of K/the derivative b sub i is approximated by finite difference. Although it is well known that the accuracy of the semi-analytic method is dependent on the finite difference parameter, recent work has suggested that more fundamental inaccuracies exist in the method when used for shape optimization. Another study has argued qualitatively that these errors are related to nonuniform errors in the stiffness matrix derivatives. The accuracy of the semi-analytic method is investigated. A general framework was developed for the error analysis and then it is shown analytically that the errors in the method are entirely accounted for by errors in delta K/delta b sub i. Furthermore, it is demonstrated that acceptable accuracy in the derivatives can be obtained through careful selection of the finite difference parameter.

Fenyes, Peter A.↗
NASA NTRS1972

Experimental and theoretical investigation of stress wave attenuation in fiber reinforced composites.

The propagation of an initialrcidrical pressure pulse through a linear elastic fiber reinforced composite medium is analysed, both experimentally and analytically. In the experiment, tests were performed on plates with single and multiple circular inclusions embedded in a matrix of lower characteristic impedance. Sharp compression pulses were generated at an edge of the plate. Strain gages were mounted on various positions of the plate to determine the attenuation of the transient stress in the fiber reinforced composite. The qualitative analytical treatment is based on the methods of propagating stress discontinuities. Computer programs were written to numerically determine the changes in the shape of the leading wave front and the stresses immediately behind it. Experimental results for the attenuation of stress wave on steel-aluminum and steel-brass fiber-matrix composites compared very well with the computed analytical results when the applied pressure is generated by small explosive charges. The results did not compare well when the applied pressure is generated by projectile impact.

Yang, J. C. S.↗
NASA NTRS1976

Rotational excitation of symmetric top molecules by collisions with atoms: Close coupling, coupled states, and effective potential calculations for NH3-He

The formalism for describing rotational excitation in collisions between symmetric top rigid rotors and spherical atoms is presented both within the accurate quantum close coupling framework and also the coupled states approximation of McGuire and Kouri and the effective potential approximation of Rabitz. Calculations are reported for thermal energy NH3-He collisions, treating NH3 as a rigid rotor and employing a uniform electron gas (Gordon-Kim) approximation for the intermolecular potential. Coupled states are found to be in nearly quantitative agreement with close coupling results while the effective potential method is found to be at least qualitatively correct. Modifications necessary to treat the inversion motion in NH3 are discussed.

Green, S.↗
NASA NTRS1980

Baroclinic instability with variable gravity: A perturbation analysis

Solutions for a quasigeostrophic baroclinic stability problem in which gravity is a function of height were obtained. Curvature and horizontal shear of the basic state flow were omitted and the vertical and horizontal temperature gradients of the basic state were taken as constant. The effect of a variable dielectric body force, analogous to gravity, on baroclinic instability for the design of a spherical, baroclinic model for Spacelab was determined. Such modeling could not be performed in a laboratory on the Earth's surface because the body force could not be made strong enough to dominate terrestrial gravity. A consequence of the body force variation and the preceding assumptions was that the potential vorticity gradient of the basic state vanished. The problem was solved using a perturbation method. The solution gives results which are qualitatively similar to Eady's results for constant gravity; a short wavelength cutoff and a wavelength of maximum growth rate were observed. The averaged values of the basic state indicate that both the wavelength range of the instability and the growth rate at maximum instability are increased. Results indicate that the presence of the variable body force will not significantly alter the dynamics of the Spacelab experiment. The solutions are also relevant to other geophysical fluid flows where gravity is constant but the static stability or Brunt-Vaisala frequency is a function of height.

Giere, A. C.↗
NASA NTRS1982

Finite area method for nonlinear conical flows

A fully conservative finite area method for the computation of steady inviscid flow about general conical bodies at incidence is described. The procedure utilizes the potential approximation and implements a body conforming mesh generator. The conical potential is assumed to have its best linear variation inside each mesh cell and a secondary interlocking cell system is used to establish the flux balance required to conserve mass. In the supersonic regions the scheme is desymmetrized by adding appropriate artificial viscosity in conservation form. The algorithm is nearly an order of a magnitude faster than present Euler methods and predicts known results accurately and qualitative features such as nodal point lift off correctly. Results are compared with those of other investigations.

Sritharan, S. S.↗
NASA NTRS1982

Geological-structural interpretation using products of remote sensing in the region of Carrancas, Minas Gerais, Brazil

The efficiency of some criteria developed for the utilization of small scale and low resolution remote sensing products to map geological and structural features was demonstrated. Those criteria were adapted from the Logical Method of Photointerpretation which consists of textural qualitative analysis of landforms and drainage net patterns. LANDSAT images of channel 5 and 7, 4 LANDSAT-RBV scenes, and 1 radar mosiac were utilized. The region of study is characterized by supracrustal metassediments (quartzites and micaschist) folded according to a "zig-zag" pattern and gnaissic basement. Lithological-structural definition was considered outstanding when compared to data acquired during field work, bibliographic data and geologic maps acquired in larger scales.

Parada, N. D. J.↗
NASA NTRS1983

Finite area method for nonlinear supersonic conical flows

A fully conservative numerical method for the computation of steady inviscid supersonic flow about general conical bodies at incidence is described. The procedure utilizes the potential approximation and implements a body conforming mesh generator. The conical potential is assumed to have its best linear variation inside each mesh cell; a secondary interlocking cell system is used to establish the flux balance required to conserve mass. In the supersonic regions the scheme is symmetrized by adding artificial viscosity in conservation form. The algorithm is nearly an order of a magnitude faster than present Euler methods and predicts known results accurately and qualitative features such as nodal point lift off correctly. Results are compared with those of other investigators.

Sritharan, S. S.↗
NASA NTRS1986

Internal structure of a vortex breakdown

An axisymmetric vortex breakdown was well simulated by the vortex filament method. The agreement with the experiment was qualitatively good. In particular, the structure in the interior of the vortex breakdown was ensured to a great degree by the present simulation. The second breakdown, or spiral type, which occurs downstream of the first axisymmetric breakdown, was simulated more similarly to the experiment than before. It shows a kink of the vortex filaments and strong three-dimensionality. Furthermore, a relatively low velocity region was observed near the second breakdown. It was also found that it takes some time for this physical phenomenon to attain its final stage. The comparison with the experiment is getting better as time goes on. In this paper, emphasis is placed on the comparison of the simulated results with the experiment. The present results help to make clear the mechanism of a vortex breakdown.

Nakamura, Y.↗