Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pulse control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Transient Mechanical Test Development for Accident Tolerant Cladding Candidates to Simulate PCMI-like Conditions

This study investigates the transient mechanical response of accident tolerant fuel (ATF) cladding candidates to provide information on potential PCMI-induced deformation and failure of candidate cladding materials. The mechanical testing is applied t to Gen-I FeCrAl and triaxially-braided SiC fiber SiC matrix composite materials under loading conditions like the PCMI during a postulated design basis reactivity insertion accident. To achieve the specific loading conditions, a modified burst test instrument with accurate mechanical pulse control has been designed and constructed. The mechanical response of FeCrAl, SiC-SiC composite tubes were compared with the pre-hydrided zirconium alloy cladding. The specimens subjected to mechanical pulses were investigated in a strain-controlled manner deformation.

Cinbiz, Nedim↗
DOE OSTI2021

Proton beam quality enhancement by spectral phase control of a PW-class laser system

We report on experimental investigations of proton acceleration from solid foils irradiated with PW-class laser-pulses, where highest proton cut-off energies were achieved for temporal pulse parameters that varied significantly from those of an ideally Fourier transform limited (FTL) pulse. Controlled spectral phase modulation of the driver laser by means of an acousto-optic programmable dispersive filter enabled us to manipulate the temporal shape of the last picoseconds around the main pulse and to study the effect on proton acceleration from thin foil targets. The results show that applying positive third order dispersion values to short pulses is favourable for proton acceleration and can lead to maximum energies of 70 MeV in target normal direction at 18 J laser energy for thin plastic foils, significantly enhancing the maximum energy compared to ideally compressed FTL pulses. The paper further proves the robustness and applicability of this enhancement effect for the use of different target materials and thicknesses as well as laser energy and temporal intensity contrast settings. We demonstrate that application relevant proton beam quality was reliably achieved over many months of operation with appropriate control of spectral phase and temporal contrast conditions using a state-of-the-art high-repetition rate PW laser system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Combining the synergistic control capabilities of modeling and experiments: Illustration of finding a minimum-time quantum objective

A common way to manipulate a quantum system, for example spins or artificial atoms, is to use properly tailored control pulses. In order to accomplish quantum information tasks before coherence is lost, it is crucial to implement the control in the shortest possible time. Here we report the near time-optimal preparation of a Bell state with fidelity higher than 99% in an NMR experiment, which is feasible by combining the synergistic capabilities of modeling and experiments operating in tandem. In this work, the pulses preparing the Bell state are found by experiments that are recursively assisted with a gradient-based optimization algorithm working with a model. Thus, we exploit the interplay between model-based numerical optimal design and experimental-based learning control. Utilizing the balanced synergism between the dual approaches, as dictated by the case specific capabilities of each approach, should have broad applications for accelerating the search for optimal quantum controls.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Generation of frequency-tunable pulsed terahertz radiation by a Cr : forsterite laser system with an acoustooptical control of the pulse temporal profile

We report the experimental results on generating pulsed terahertz (THz) radiation, frequency-tunable within the range 0.5−2 THz. The THz pulse generation was implemented using the method of optical rectification of femtosecond laser pulses in the nonlinear organic crystal OH1. The frequency tuning of the THz radiation was provided by adaptive phase – amplitude modulation of the pump pulses from the Cr : forsterite laser system with a radiation wavelength of 1230 nm using the acoustooptical dispersion delay line. (paper)

42 ENGINEERING↗
NASA NTRS1984

Inverse Modelling to Obtain Head Movement Controller Signal

Experimentally obtained dynamics of time-optimal, horizontal head rotations have previously been simulated by a sixth order, nonlinear model driven by rectangular control signals. Electromyography (EMG) recordings have spects which differ in detail from the theoretical rectangular pulsed control signal. Control signals for time-optimal as well as sub-optimal horizontal head rotations were obtained by means of an inverse modelling procedures. With experimentally measured dynamical data serving as the input, this procedure inverts the model to produce the neurological control signals driving muscles and plant. The relationships between these controller signals, and EMG records should contribute to the understanding of the neurological control of movements.

Kim, W. S.↗
NASA NTRS1957

Flight Investigation at Low Angles of Attack to Determine the Longitudinal Stability and Control Characteristics of a Cruciform Canard Missile Configuration with a Low-Aspect-Ratio Wing and Blunt Nose at Mach Numbers from 1.2 to 2.1

A full- scale rocket-powered model of a cruciform canard missile configuration with a low- aspect - ratio wing and blunt nose has been flight tested by the Langley Pilotless Aircraft Research Division. Static and dynamic longitudinal stability and control derivatives of this interdigitated canard-wing missile configuration were determined by using the pulsed- control technique at low angles of attack and for a Mach number range of 1.2 to 2.1. The lift - curve slope showed only small nonlinearities with changes in control deflection or angle of attack but indicated a difference in lift- .curve slope of approximately 7 percent for the two control deflections of delta = 3.0 deg and delta= -0.3 deg . The large tail length of the missile tested was effective in producing damping in pitch throughout the Mach number range tested. The aerodynamic- center location was nearly constant with Mach number for the two control deflections but was shown to be less stable with the larger control deflection. The increment of lift produced by the controls was small and positive throughout the Mach number range tested, whereas the pitching moment produced by the controls exhibited a normal trend of reduced effectiveness with increasing Mach number.The effectiveness of the controls in producing angle of attack, lift, and pitching moment was good at all Mach numbers tested.

Brown, Clarence A , Jr↗
DOE OSTI2022

Fuel recycling control in long pulse operation with full tungsten divertors in EAST tokamak

Fuel recycling control in long pulse discharges is studied in EAST tokamak with tungsten divertors by particle balance. Double null configuration, proper Resonant Magnetic Perturbation (RMP), divertor cryopumps and realtime lithium injection, are all very effective for recycling control. High heating power discharge leads to low recycling due to the enhancement of particle exhausting. High external gas injection is required in a low fuel recycling discharge to keep a constant density, and Dα emission is increased by external injection, therefore a higher Dα emission may indicate low fuel recycling for the same plasma density. Reproducible long pulse discharges of over 100 s with core electron temperature >10 keV, and 1056 s discharge with ~1.5 MW heating power were obtained in the EAST 2021 campaign, fuel recycling was well controlled by divertor cryopumps and realtime lithium injection. The results provide a valuable reference for the high power and long pulse operation in future fusion reactors, such as ITER and CFETR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1957

Flight Investigation at Low Angles of Attack to Determine the Longitudinal Stability and Control Characteristics of a Cruciform Canard Missile Configuration with a Low-Aspect-Ratio Wing and Blunt Nose at Mach Numbers from 1.2 to 2.1

A full-scale rocket-powered model of a cruciform canard missile configuration with a low-aspect-ratio wing and blunt nose has been flight tested by the Langley Pilotless Aircraft Research Division. Static and dynamic longitudinal stability and control derivatives of this interdigitated canard-wing missile configuration were determined by using the pulsed-control technique at low angles of attack and for a Mach number range of 1.2 to 2.1. The lift-curve slope showed only small nonlinearities with changes in control deflection or angle of attack but indicated a difference in lift-curve slope of approximately 7 percent for the two control deflections of delta = 3.0 deg and delta = -0.3 deg. The large tail length of the missile tested was effective in producing damping in pitch throughout the Mach number range tested. The aerodynamic-center location was nearly constant with Mach number for the two control deflections but was shown to be less stable with the larger control deflection. The increment of lift produced by the controls was small and positive throughout the Mach number range tested, whereas the pitching moment produced by the controls exhibited a normal trend of reduced effectiveness with increasing Mach number. The effectiveness of the controls in producing angle of attack, lift, and pitching moment was good at all Mach numbers tested.

Brown, C. A., Jr.↗
NASA NTRS1981

Ultrasonic frequency analysis

Technique is used for evaluation and characterization of materials, fluids, and biological tissue. Method eliminates problem of electrical drive pulse shape by slaving tracking generator to local oscillator of spectrum analyzer. Logic/timing generator is used to control pulse transmission and receiving sequence, pulse width, and pulse repetition rate.

Cantrell, J. H.↗
DOE OSTI2023

A Pulse Generation Framework with Augmented Program-aware Basis Gates and Criticality Analysis

Near-term intermediate scale quantum (NISQ) de- vices are subject to considerable noise and short coherence time. Consequently, it is critical to minimize circuit execution latency. Traditionally, each basis gate of a transpiled circuit is decoded into a fixed episode of the device control pulses. Recently, people started to investigate merged pulse generation for customized gates through quantum optimal control (QOC). However, existing QOC approaches face the challenges of (i) restricted search space due to prohibitive compilation overhead; (ii) suboptimal end-to-end performance due to aggressive local optimization and falsely introduced dependency among the customized gates; (iii) inadequate adaptivity towards system calibration, which is critical for NISQ devices. In this work, we propose PAQOC, a novel QOC framework that can (i) automatically detect frequently encountered gate patterns in the logical circuit by modeling the problem as a subgraph mining process and reuse these patterns to enable much larger search space exploration (i.e., program aware); (ii) systemically construct customized gate-set based on the impact to the overall program latency (i.e., criticality-aware); and (iii) quickly adapt to system re-calibration thanks to the small-scale pattern-based gate generation (i.e., adaptivity-aware). PAQOC achieves a good tradeoff between circuit performance and compilation time, allowing fully automatic, single stop, ad- hoc customized pulse generation for more efficient execution of user programs on NISQ devices. Evaluations using fifteen applications show that PAQOC can achieve on average 1.95× speedup of the circuit latency and achieve on average 36.7% reduction in compilation overhead. With PAQOC, circuits can run faster with reduced noise, allowing deeper circuits to be tested within the coherence time of present NISQ platforms.

Chen, Yanhao↗
DOE OSTI2024

Optimal Control for Fourier Transform on Qudits

In this work, we develop a protocol to find the optimal control pulse for implementing the Quantum Fourier Transform (QFT) on qudit-based hardware. We focus on two types of controls: (1) qubit-qudit dispersive coupling with qubit and qudit drives, and (2) qubit-qudit system with tunable coupling and qubit drive. We observe that for both systems, the minimum gate time grows linearly as a function of the size of the logical space. We find that the latter system supports faster pulses, requiring 45% shorter pulse time.

Ha, Triet↗
NASA NTRS1980

Temperature controller for hyperthermia devices

Temperature controller monitors and controls temperature in local region of tumor. Medical grade thermocouples are inserted in or near tumor, controller pulse modulates radio frequency diathermy power source to maintain temperature within 0.2 C. System may be extended to control diathermy of more than one tumor or patient.

Couch, R. H.↗
NASA NTRS1988

Switching Voltage Regulator

Both pulsed and continuous outputs available. Switching power-supply circuit converts input power from two 9-V batteries in series to output of 5 Vdc regulated within 1.5 percent, either at continuous current of 5 mA or at current of 500 mA in 0.5-s pulses at 1-min intervals. Power supply is buck converter. Principle of operation inductive and capacitive filtering of controlled pulses of battery voltage.

Mclyman, W. T.↗
DOE OSTI2018

Failure behavior of SiC/SiC composite tubes under strain rates similar to the pellet-cladding mechanical interaction phase of reactivity-initiated accidents

The mechanical response of a nuclear-grade silicon carbide fiber-reinforced silicon carbide matrix (SiC/SiC) composite was investigated under mechanical loading conditions mimicking the pellet-cladding mechanical interaction (PCMI) phase of a reactivity-initiated accident (RIA). In a RIA, cladding deformation and failure can be induced by the rapid thermal expansion of the nuclear fuel. A pulse-controlled modified-burst test was used to investigate RIA-like PCMI scenarios on SiC/SiC composite samples at pulse widths from 12 to 100 ms.The strain-driven nature of the cladding sample deformation was due to the rapid internal pressurization and subsequent expansion of a secondary tube. A digital-image correlation technique was used to measure strains from the speckle-painted outer surface of the tubes. The failure strains of samples tested at slower rates, such as RIA event durations of 52 and 100 ms, showed good agreement with the literature-reported values for similar composites tested at slow strain rates. Additionally, the failure strain showed good agreement with reference expansion-due-to-compression tests at slow strain rate. However, a decrease in the failure strain was determined for the fast-rate (12 ms) tests. This indicated that the failure strain of these composites might be influenced by the strain rate during RIA-like events. In conclusion, the failure strains observed in the tests corresponded to local energy depositions of approximately 50 cal/g UO 2 from hot zero power, with an initial condition of pellet–cladding gap closure prior to the event. In-pile transient testing of these concepts that would result in hoop strain due to PCMI in the range of 0.5–1.0% is recommended.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Practical implications of SFQ-based two-qubit gates

Scalability of today’s superconducting quantum computers is limited due to the huge costs of generating/routing microwave control pulses per qubit from room temperature. One active research area in both industry and academia is to push the classical controllers to the dilution refrigerator in order to increase the scalability of quantum computers. Superconducting Single Flux Quantum (SFQ) is a classical logic technology with low power consumption and ultra-high speed, and thus is a promising candidate for in-fridge classical controllers with maximized scalability. Prior work has demonstrated high-fidelity SFQ-based single-qubit gates. However, little research has been done on SFQ-based multi-qubit gates, which are necessary to realize SFQ-based universal quantum computing.In this paper, we present the first thorough analysis of SFQ-based two-qubit gates. Our observations show that SFQ-based two-qubit gates tend to have high leakage to qubit non-computational subspace, which presents severe design challenges. We show that despite these challenges, we can realize gates with high fidelity by carefully designing optimal control methods and qubit architectures. We develop optimal control methods that suppress leakage, and also investigate various qubit architectures that reduce the leakage. After carefully engineering our SFQ-friendly quantum system, we show that it can achieve similar gate fidelity and gate time to microwave-based quantum systems. Furthermore, the promising results of this paper show that (1) SFQ-based universal quantum computation is both feasible and effective; and (2) SFQ is a promising approach in designing classical controller for quantum machines because it can increase the scalability while preserving gate fidelity and performance.

42 ENGINEERING↗
DOE OSTI2022

Disruption Prediction and Avoidance in High Beta Long Pulse KSTAR Plasmas

This research is a concentrated and coordinated experimental and physics analysis program by a small U.S. team, focused on the topical area of “Long Pulse Control” as stated in the proposal solicitation. The overall goal of the research is to produce world-class analysis regarding forecasting and avoidance of disruptions in a long-pulse, superconducting tokamak at high stability parameters (e.g. normalized beta) with direct, quantifiable figures of merit (i.e. plasma disruption rate - “disruptivity”) and its reduction based on improved stability physics and control. The research targets the backbone of the problem – the basic, main issues – to produce this quantitative analysis by: (1) Creating and applying a new physics-based paradigm to understand how to eliminate disruptions: disruption event characterization, and event chain analysis – a direct manifestation of the approach suggested in the DOE Transients Report, (2) Ensuring that the components required to produce high-quality measurements and analysis needed for disruption event characterization for the tokamak in question (here, KSTAR) exist (e.g. pressure profile peaking, high-accuracy pitch angle data, compensated low frequency toroidal mode number n = 1 mode measurement) to create a primarily physics-based disruption forecasting capability, and (3) Addressing disruption avoidance for the first time in KSTAR by attacking primary disruption ‘event chains’, utilizing the most important associated plasma measurements (dynamic n = 1 field). The focus of this work will be avoidance of macroscopic instabilities, especially global modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗