Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “program synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Preliminary analysis of long-range aircraft designs for future heavy airlift missions

A computerized design study of very large cargo aircraft for the future heavy airlift mission was conducted using the Aircraft Synthesis program (ACSYNT). The study was requested by the Air Force under an agreement whereby Ames provides computerized design support to the Air Force Flight Dynamics Laboratory. This effort is part of an overall Air Force program to study advanced technology large aircraft systems. Included in the Air Force large aircraft program are investigations of missions such as heavy airlift, airborne missile launch, battle platform, command and control, and aerial tanker. The Ames studies concentrated on large cargo aircraft of conventional design with payloads from 250,000 to 350,000 lb. Range missions up to 6500 n.mi. and radius missions up to 3600 n.mi. have been considered. Takeoff and landing distances between 7,000 and 10,000 ft are important constraints on the configuration concepts. The results indicate that a configuration employing conventional technology in all disciplinary areas weighs approximately 2 million pounds to accomplish either a 6500-n.mi. range mission or a 3600-n.mi. radius mission with a 350,000-lb payload.

Nelms, W. P., Jr.↗
NASA NTRS1976

Buckling behavior and structural efficiency of open-section stiffened composite compression panels

Several experiments with J- and blade-stiffened graphite/epoxy panels were conducted to obtain insight into how well experimental data could be correlated with analysis for the buckling behavior of open-section stiffened composite compression panels. Although some nonlinear behavior was observed during the experiments, adequate correlation with analysis was obtained to justify the use of linear, thin-plate buckling analysis in a minimum-weight design synthesis program for J- and blade-configurations. Results from two design studies using this program are presented. In the first study the minimum weights of Jand blade-configurations for two different material systems (graphite/epoxy and aluminum) are determined subject to buckling and strength constraints for a wide range of the compressive load index. In the second study the minimum weights required for graphite/epoxy blade-stiffened panels to satisfy additional stiffness constraints typical of medium-size commercial aircraft wing structures are determined. Both minimum-weight studies indicate that graphite/epoxy open-section stiffened panels can be designed so that weight savings of 30 to 50% are possible compared with the most efficient aluminum designs.

Williams, J. G.↗
NASA NTRS1976

Automated optimization techniques for aircraft synthesis

Application of numerical optimization techniques to automated conceptual aircraft design is examined. These methods are shown to be a general and efficient way to obtain quantitative information for evaluating alternative new vehicle projects. Fully automated design is compared with traditional point design methods and time and resource requirements for automated design are given. The NASA Ames Research Center aircraft synthesis program (ACSYNT) is described with special attention to calculation of the weight of a vehicle to fly a specified mission. The ACSYNT procedures for automatically obtaining sensitivity of the design (aircraft weight, performance and cost) to various vehicle, mission, and material technology parameters are presented. Examples are used to demonstrate the efficient application of these techniques.

Vanderplaats, G. N.↗
NASA NTRS1976

A hybrid airship concept for Naval missions

A preliminary analysis of a hybrid semibuoyant delta-planform airship was performed using a computer synthesis program. The delta-planform hull shape was studied parametrically to determine the effects on vehicle performance for two Navy antisubmarine missions. The effects of buoyancy ratio, design speed, and altitude were also studied. The results suggest that long-range mission vehicles require a near buoyant or fully buoyant design and that there is no special advantage to the use of a lifting-body hull shape. For shorter-range missions, hybrid vehicles may have merit, and optimum vehicle buoyancy varies depending on whether a minimum-weight or minimum-fuel-consumption design is desired. As compared with conventionally shaped airships, the benefits, if any, from a lifting-body configuration will be limited to missions requiring relatively higher flight speeds.

Harper, M.↗
NASA NTRS1977

Conceptual design of single turbofan engine powered light aircraft

The conceptual design of a four place single turbofan engine powered light aircraft was accomplished utilizing contemporary light aircraft conventional design techniques as a means of evaluating the NASA-Ames General Aviation Synthesis Program (GASP) as a preliminary design tool. In certain areas, disagreement or exclusion were found to exist between the results of the conventional design and GASP processes. Detail discussion of these points along with the associated contemporary design methodology are presented.

Snyder, F. S.↗
NASA NTRS1978

A study of commuter airplane design optimization

The usability of the general aviation synthesis program (GASP) was enhanced by the development of separate computer subroutines which can be added as a package to this assembly of computerized design methods or used as a separate subroutine program to compute the dynamic longitudinal, lateral-directional stability characteristics for a given airplane. Currently available analysis methods were evaluated to ascertain those most appropriate for the design functions which the GASP computerized design program performs. Methods for providing proper constraint and/or analysis functions for GASP were developed as well as the appropriate subroutines.

Keppel, B. V.↗
NASA NTRS1980

Alternatives for jet engine control

Alternatives to linear quadratic regulator theory in the linear case are examined along with nonlinear modelling and optimization approaches for global control. Context for the studies has been set by the DYNGEN digital simulator and by models generated for various phases of the F100 Multivariable Control Synthesis Program. With respect to the linear alternatives, the multivariable frequency domain is stressed. Progress is reported in both the direct algebraic approach to exact model matching, by means of stimulating work on the basic computational issues, and in the indirect generalized Nyquist approach. With respect to nonlinear modelling and optimization, the emphasis is twofold: the development of analytical nonlinear models of the jet engine and the use of these models in conjunction with techniques of mathematical programming in order to study global control over nonincremental portions of the flight envelope. The possibility of using tensor methods is explored.

Sain, M. K.↗
NASA NTRS1981

Application of the MNA design method to a nonlinear turbofan engine

Using nonlinear digital simulation as a representative model of the dynamic operation of the QCSEE turbofan engine, a feedback control system is designed by variable frequency design techniques. Transfer functions are generated for each of five power level settings covering the range of operation from approach power to full throttle (62.5% to 100% full power). These transfer functions are then used by an interactive control system design synthesis program to provide a closed loop feedback control using the multivariable Nyquist array and extensions to multivariable Bode diagrams and Nichols charts.

Leininger, G. G.↗
NASA NTRS1981

Conceptual/preliminary design study of subsonic v/stol and stovl aircraft derivatives of the S-3A

A computerized aircraft synthesis program was used to examine the feasibility and capability of a V/STOL aircraft based on the Navy S-3A aircraft. Two major airframe modifications are considered: replacement of the wing, and substitution of deflected thrust turbofan engines similar to the Pegasus engine. Three planform configurations for the all composite wing were investigated: an unconstrained span design, a design with the span constrained to 64 feet, and an unconstrained span oblique wing design. Each design was optimized using the same design variables, and performance and control analyses were performed. The oblique wing configuration was found to have the greatest potential in this application. The mission performance of these V/STOL aircraft compares favorably with that of the CTOL S-3A.

Kidwell, G. H., Jr.↗
NASA NTRS1982

Assessment of advanced technologies for high performance single-engine business airplanes

The prospects for significantly increasing the fuel efficiency and mission capability of single engine business aircraft through the incorporation of advanced propulsion, aerodynamics and materials technologies are explored. It is found that turbine engines cannot match the fuel economy of the heavier rotary, diesel and advanced spark reciprocating engines. The rotary engine yields the lightest and smallest aircraft for a given mission requirement, and also offers greater simplicity and a multifuel capability. Great promise is also seen in the use of composite material primary structures in conjunction with laminar flow wing surfaces, a pusher propeller and conventional wing-tail configuration. This study was conducted with the General Aviation Synthesis Program, which can furnish the most accurate mission performance calculations yet obtained.

Kohlman, D. L.↗
NASA NTRS1982

Polymer research at NASA Langley Research Center

Polymer synthesis programs involve the development of Novel thermoplastics, pseudothermoplastics, and thermosets. These systems are prepared to elucidate structure-property relationships involving thermal capabilities, toughness, processability and environmental stability. Easily processable polyimides, solvent-resistant polysulfones and polyphenylquinoxalines, and tougher high and intermediate temperature polymers were developed. Characterization efforts included high pressure liquid chromatography methodology, the development of toughness tests for fiber reinforced composites, a study of electrical properties of metal ion filled polyimides, and a study of the mutagenicity of aromatic diamines. Also the mechanism of cure/degradation of experimental polymers was studied by rheology, mechanical behavior, separation techniques and spectroscopy. The degradative crosslinking of alkyl-containing polyimides, the separation and identification of crosslinked phenylquinoxalines, the rheological behavior of hot-melt polyimides, and the elucidation of the cure of norbornene endcapped imides were also studied.

Terry L. St. Clair↗
NASA NTRS1982

Performance improvements of single-engine business airplanes by the integration of advanced technologies

An assessment is presented of the performance gains and economic impact of the integration in general aviation aircraft of advanced technologies, relating to such aspects of design as propulsion, natural laminar flow, lift augmentation, unconventional configurations, and advanced aluminum and composite structures. All considerations are with reference to a baseline mission of 1300 nm range and 300-knot cruise speed with a 1300-lb payload, and a baseline aircraft with a 40 lb/sq ft wing loading and an aspect ratio of 8. Extensive analytical results are presented from the NASA-sponsored General Aviation Synthesis Program. Attention is given to the relative performance gains to be expected from the single-engined baseline aircraft's use of a low cost general aviation turbine engine, a spark-ignited reciprocating engine, a diesel engine, and a Wankel rotary engine.

Kohlman, D. L.↗
NASA NTRS1984

Thermoplastic/Melt-Processable Polyimides

Several polyimides were prepared which show promise for aircraft composite applications. This was achieved through a systematic polymer synthesis program where the glass transition temperatures were greatly lowered when compared to the older polyimide systems. Several of the materials were shown to be hot-melt processable and are attractive matrix resin candidates especially in light of their high g(sub Ic) values. At least two of these polyimides are available for evaluation and others are on the research horizon.

St.clair, T. L.↗
NASA NTRS1984

Computer study of a jet flap ASTVOL 'Harrier'

A study of the costs/benefits trade-off was conducted for an Advanced Supersonic Short Takeoff and Vertical Landing (ASTOVL) aircraft incorporating a jet flap. The data used were the theory of jet flaps and high aspect ratio nozzles, experience with a V/STOL aircraft study performed for NASA Ames Research Center in February 1982, and a high performance aircraft-synthesis program (ACSYNT). The methodology was to accurately model the supersonic Harrier V/STOL aircraft design on ACSYNT, and then modify the design by both adding high aspect-ratio nozzles in place of the rear (core-flow) nozzles on the Pegasus-type turbofan engine, and integrating these nozzles on each wing's trailing edge, thus creating a jet flap. The predicted performance advantages (increase in maximum lift coefficient with flap deflection and horizontal thrust recovery) were traded off against the disadvantages (additional weight and thrust loss due to ducting) on two representative missions.

Wilson, S. B., III↗
NASA NTRS1987

An allotment planning concept and related computer software for planning the fixed satellite service at the 1988 space WARC

Described is a two-phase approach to allotment planning suitable for use in establishing the fixed satellite service at the 1988 Space World Administrative Radio Conference (ORB-88). The two phases are (1) the identification of predetermined geostationary arc segments common togroups of administrations, and (2) the use of a synthesis program to identify example scenarios of space station placements. The planning approach is described in detail and is related to the objectives of the confernece. Computer software has been developed to implement the concepts, and a complete discussion on the logic and rationale for identifying predetermined arc segments is given. Example scenarios are evaluated to give guidance in the selection of the technical characteristics of space communications systems to be planned. The allotment planning concept described guarantees in practice equitable access to the geostationary orbit, provides flexibility in implementation, and reduces the need for coordination among administrations.

Miller, Edward F.↗
NASA NTRS1988

High performance composites research at NASA-Langley

Barriers to the more extensive use of advanced composites in heavily loaded structures on commercial transports are discussed from a materials viewpoint. NASA-Langley matrix development activities designed to overcome these barriers are presented. These include the synthesis of processible, tough, durable matrices, the development of resin property/composite property relationships which help guide the synthesis program, and the exploitation of new processing technology to effectively combine reinforcement filament with polymer matrices. Examples of five classes of polymers being investigated as matrix resins at NASA Langley are presented, including amorphous and semicrystalline thermoplastics, lightly crosslinked thermoplastics, semi-interpenetrating networks and toughened thermosets. Relationships between neat resin modulus, resin fracture energy, interlaminar fracture energy, composite compression strength, and post-impact compression strength are shown. Powder and slurry processing techniques are discussed.

Stclair, Terry L.↗
NASA NTRS1987

An allotment planning concept and related computer software for planning the fixed satellite service at the 1988 space WARC

The authors describe a two-phase approach to allotment planning suitable for use in planning the fixed satellite service at the 1988 Space World Administrative radio Conference (ORB-88). The two phases are (1) the identification of predetermined geostationary arc segments common to groups of administrations and (2) the use of a synthesis program to identify example scenarios of space station placements. The planning approach is described in detail and is related to the objectives of the conference. Computer software has been developed to implement the concepts, and the logic and rationale for identifying predetermined arc segments is discussed. Example scenarios are evaluated to give guidance in the selection of the technical characteristics of space communications systems to be planned. The allotment planning concept described guarantees equitable access to the geostationary orbit, provides flexibility in implementation, and reduces the need for coordination among administrations.

Miller, Edward F.↗
NASA NTRS1988

High performance composites research at NASA-Langley

Barriers to the more extensive use of advanced composites in heavily loaded structures on commercial transports are discussed from a materials viewpoint. NASA Langley matrix development activities designed to overcome these barriers are presented. These include the synthesis of processable, tough, durable matrices, the development of resin-property/composite-property relationships which help guide the synthesis program, and the exploitation of new processing technology to effectively combine reinforcement filaments with polymer matrices. Examples of five classes of polymers being investigated as matrix resins at NASA Langley are presented, including amorphous and semicrystalline thermoplastics, lightly crosslinked thermoplastics, semiinterpenetrating networks, and toughened thermosets. Relationships between neat resin modulus, resin fracture energy, interlaminar fracture energy, composite compression strength, and postimpact compression strength are shown. Powder and slurry processing techniques are discussed.

Saint Clair, Terry L.↗