Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase association”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Quasi-periodic Energy Release and Jets at the Base of Solar Coronal Plumes

Coronal plumes are long, ray-like, open structures that have been considered as possible sources of the solar wind. Their origin in the largely unipolar coronal holes has long been a mystery. Earlier spectroscopic and imaging observations revealed blueshifted plasma and propagating disturbances (PDs) in plumes that are widely interpreted in terms of flows and/or propagating slow-mode waves, but these interpretations (flows versus waves) remain under debate. Recently we discovered an important clue about plume internal structure: dynamic filamentary features called plumelets, which account for most of the plume emission. Here we present high-resolution observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly and the Interface Region Imaging Spectrograph that revealed numerous, quasi-periodic, tiny jets (so-called jetlets) associated with transient brightening, flows, and plasma heating at the chromospheric footpoints of the plumelets. By analogy to larger coronal jets, these jetlets are most likely produced within the plume base by magnetic reconnection between closed and open flux at stressed 3D null points. The jetlet-associated brightenings are in phase with plumelet-associated PDs, and vary with a period of ∼3–5 minutes, which is remarkably consistent with the photospheric/ chromospheric p-mode oscillation. This reconnection at the open-closed boundary in the chromosphere/transition region is likely modulated or driven by local manifestations of the global p-mode waves. The jetlets extend upward to become plumelets, contribute mass to the solar wind, and may be sources of the switchbacks recently detected by the Parker Solar Probe.

jets↗
NASA NTRSDate not supplied

Combining Data with Physical Knowledge for Uncertainty Quantification in Certification and Reliability Analysis

Unifying empirical data with predictive models can enable engineering cost-savings through certification by analysis and reliability-based design. Both concepts require rigorous uncertainty quantification (UQ) and robust understanding and treatment of relevant physics. Combining sampling-based UQ algorithms with high-fidelity simulations creates a computational bottleneck that is often alleviated through the use of machine learning (ML). ML can be used to create computationally efficient surrogates for simulations of complex or high-dimensional physical interactions (e.g., multi-phase interactions associated with melt pools in laser powder bed fusion or spatially-dependent material properties in functionally graded materials). However, negative side effects of ML may include a lack of interpretability and negative correlation between event rarity and simulation accuracy due to a lack of training data. As such, it is important to infuse ML algorithms with physics-based guardrails to provide confidence in their predictions. This talk will provide a brief review of recent NASA research at this intersection of physics-based simulation, ML, and UQ with a focus on certification and reliability analysis.

uncertainty quantification↗
NASA NTRS2004

The Crystallization of Canavalin as a Function of pH and NaCl Concentration

We posed the question of what happens to a protein that is known to grow as an n-mer when it is placed in solution conditions where it is monomeric. The trypsin-treated, or cut, form of the protein canavalin (CCAN) has been shown to nucleate and grow crystals as a trimer from neutral to slightly acidic solutions. Under these conditions the solution is composed almost wholly of trimers. The crystalline protein can be readily dissolved by weakly basic solution, which has been proposed to result in a solution that is monomeric. There are three possible outcomes to an attempt at crystallization of the protein under monomeric (high pH) conditions: 1) we will obtain the same crystals as under trimer conditions, but at different protein concentrations governed by the self association equilibria; 2) we will obtain crystals having a different symmetry, based upon a monomeric growth unit; 3) we will not obtain crystals. Obtaining the first result would be indicative that the solution-phase self-association process is critical to the crystal nucleation and growth process. The second result would be less clear, as it may also reflect a pH-dependent shift in the trimer-trimer molecular interactions. The third result, particularly for experiments in the transition pH's between trimeric and monomeric CCAN, would indicate that the monomer does not crystallize, and that solution phase self association is not part of the crystal nucleation and growth path. Results are presented for crystallization experiments of CCAN over the pH 6.4 to 9.6 range. Fluorescence anisotropy, light scattering, and gel filtration experiments show that the solutions are primarily trimers, with association to form larger species occurring as a function of protein concentration.

Forsythe, Elizabeth L.↗
NASA NTRS1990

Data association multiple target tracking using a phase-mostly liquid crystal television

This paper presents a technique of using data association target tracking in a motion sequence via an adaptive joint transform correlator. The massive data in the field of view can be reduced to a few correlation peaks. The average velocity of a target during the tracking cycle is then determined from the location of the correlation peak. A data association algorithm is used for the analysis of these correlation signals, with which multiple targets can be tracked. A phase-mostly liquid-crystal TV is used in the hybrid joint transform correlation system, and simultaneous tracking of three targets is demonstrated.

Tam, Eddy C.↗
NASA NTRS1992

Effects of Fe/C phase separation on the ages of white dwarfs

The energy release associated with the phase separation of Fe from C in a predominantly C white dwarf is calculated. The total gravitational-plus-internal energy differences between models of homogeneous compositions and those wth Fe-enriched cores are computed. In the unlikely case where the core is pure Fe, a substantial extension of the white dwarf cooling times is found, even with the small cosmic abundance of this element. For the more realistic core compositions that result if the Fe/C phase diagram is either of the spindle or of the azeotropic type, the energy release is still sufficient to prolong the cooling times by about 0.6 Gyr, comparable to that produced by C/O phase separation. Phase separation is found to produce an appreciable 'bump' in the luminosity function, although not one large enough to exceed the observational errors at low luminosities.

Xu, Z. W.↗
NASA NTRS2003

Scandia-and-Yttria-Stabilized Zirconia for Thermal Barriers

yttria in suitable proportions has shown promise of being a superior thermal- barrier coating (TBC) material, relative to zirconia stabilized with yttria only. More specifically, a range of compositions in the zirconia/scandia/yttria material system has been found to afford increased resistance to deleterious phase transformations at temperatures high enough to cause deterioration of yttria-stabilized zirconia. Yttria-stabilized zirconia TBCs have been applied to metallic substrates in gas turbine and jet engines to protect the substrates against high operating temperatures. These coatings have porous and microcracked structures, which can accommodate strains induced by thermal-expansion mismatch and thermal shock. The longevity of such a coating depends upon yttria as a stabilizing additive that helps to maintain the zirconia in an yttria-rich, socalled non-transformable tetragonal crystallographic phase, thus preventing transformation to the monoclinic phase with an associated deleterious volume change. However, at a temperature greater than about 1,200 C, there is sufficient atomic mobility that the equilibrium, transformable zirconia phase is formed. Upon subsequent cooling, this phase transforms to the monoclinic phase, with an associated volume change that adversely affects the integrity of the coating. Recently, scandia was identified as a stabilizer that could be used instead of, or in addition to, yttria. Of particular interest are scandia-and-yttria-stabilized zirconia (SYSZ) compositions of about 6 mole percent scandia and 1 mole percent yttria, which have been found to exhibit remarkable phase stability at a temperature of 1,400 C in simple aging tests. Unfortunately, scandia is expensive, so that the problem becomes one of determining whether there are compositions with smaller proportions of scandia that afford the required high-temperature stability. In an attempt to solve this problem, experiments were performed on specimens made with reduced proportions of scandia. The criterion used to judge these specimens was whether they retained the non-transformable tetragonal phase after a severe heat treatment of 140 hours at 1,400 C.

Mess, Derek↗
NASA NTRS1988

Coherent phasing of segmented mirrors

The technical issues associated with a coherently phased segmented mirror can be divided into two types. The first involves the issues of manufacturing the surface quality of the mirror segments themselves (coherent phasing of individual segments). The second involves assembly issues of initializing in 1 G and retaining in 0 G an aggregate segmented mirror (coherent phasing between individual segments). Using a rectangular coordinate system at the vertex of a mirror segment, the rigid body motions are the six translational and rotational degrees of freedom. A first cut primary mirror wavefront error budget is presented. For a minimum operational wavelength of 30 micrometers, the derived values from the budget are: segment surface quality (0.45 micrometers RMS), radius mismatch (50 PPM), segment piston error (1.3 micrometers, segment tip/tilt error (0.6 microrad). Either active or passive segmented mirrors can be addressed, but if the surface quality of the off-axis segment and the radius matching requirements can be passively met, then only segment alignment need be sensed and controlled during operation in orbit. For the active mirror case, dimensional stability of the mirror material during operation is a key factor in establishing the degree of active figure control required.

Jones, Peter A.↗
NASA NTRS1981

Pursuit tracking and higher levels of skill development in the human pilot

A model of the human pilot is offered for pursuit tracking tasks; the model encompasses an existing model for compensatory tracking. The central hypothesis in the development of this model states that those primary structural elements in the compensatory model responsible for the pilot's equalization capabilities remain intact in the pursuit model. In this latter case, effective low-frequency inversion of the controlled-element dynamics occurs by feeding-forward derived input rate through the equalization dynamics, with low-frequency phase droop minimized. The sharp reduction in low-frequency phase lag beyond that associated with the disappearance of phase droop is seen to accompany relatively low-gain feedback of vehicle output. The results of some recent motion cue research are discussed and interpreted in terms of the compensatory-pursuit display dichotomy. Tracking with input preview is discussed in a qualitative way. In terms of the model, preview is shown to demand no fundamental changes in structure or equalization and to allow the pilot to eliminate the effective time delays that accrue in the inversion of the controlled-element dynamics. Precognitive behavior is discussed, and a model that encompasses all the levels of skill development outlined in the successive organizations of perception theory is finally proposed.

Hess, R. A.↗
NASA NTRS1991

Calculations of particle-laden flows by second-moment closures

A differential second-moment closure is applied to calculate nonswirling turbulent particle-laden jet flow. The closure is effected by extending constant-density single-phase turbulence models to the continuous (carrier) phase of two-phase flow. The dispersed (discrete) phase is treated by stochastic-Lagrangian technique. To reduce the effects of numerical (false) diffusion on the predicted results, a higher order differencing scheme, namely the flux-spline, is employed. In addition, an experimental study is conducted to provide data of good quality, especially near the inlet, for model assessment. The experiment consists of a confined coaxial jet flow of air with glass beads. The beads' diameter is 105 microns and is injected from the inner jet with a mass loading ratio of 0.9. The computed results are in good agreement with experimental data, especially for the carrier phase. However, the predicted turbulence fluctuations associated with the discrete phase are lower than the data at the downstream region of the flow field.

Nikjooy, M.↗
NASA NTRS1991

Role of valence electrons in phase transformation kinetics of thallium and its dilute alloys

The kinetics of the phase transformation of thallium and its dilute alloys were investigated using XRD and calorimetry. Pure thallium exhibits a beta(bcc) to alpha(hcp) phase transformation on cooling at 508 K. With alloying additions, the crystal structure for each phase does not change, although the size of the unit cell increases. The enthalpy and the temperature of phase transformation of each alloy have been determined. The chemical free energy change associated with the phase transformation of each alloy was calculated. The valence electrons make an outstanding contribution to the chemical free energy change required for the phase change.

Ahmed, R.↗
NASA NTRS1973

Ultrasonic investigation of the nematic-isotropic phase transition in MBBA.

Relaxation processes associated with the nematic-isotropic phase transition are investigated in liquid crystals of p-methoxybenzylidine-p-n-butylaniline. Sound velocity and absorption are measured at frequencies from 0.3 to 23 MHz at temperatures from 23 to 77 C in samples without preferred orientations. Particular attention is given to the region of transition at about 44 C. Sound absorption and velocity dispersion far from the phase transition region can be well described by a single relaxation process, while in the vicinity of the phase transition the acoustic properties are characteristic of a multiply relaxing fluid.

Eden, D.↗
NASA NTRS1997

Moessbauer Mineralogy on the Moon: The Lunar Regolith

A first-order requirement for spacecraft missions that land on solid planetary objects is instrumentation for mineralogical analyses. For purposes of providing diagnostic information about naturally-occurring materials, the element iron is particularly important because it is abundant and multivalent. Knowledge of the oxidation state of iron and its distribution among iron-bearing mineralogies tightly constrains the types of materials present and provides information about formation and modification (weathering) processes. Because Moessbauer spectroscopy is sensitive to both the valence of iron and its local chemical environment, the technique is unique in providing information about both the relative abundance of iron-bearing phases and oxidation state of the iron. The Moessbauer mineralogy of lunar regolith samples (primarily soils from the Apollo 16 and 17 missions to the Moon) were measured in the laboratory to demonstrate the strength of the technique for in situ mineralogical exploration of the Moon. The regolith samples were modeled as mixtures of five iron-bearing phases: olivine, pyroxene, glass, ilmenite, and metal. Based on differences in relative proportions of iron associated with these phases, volcanic ash regolith can be distinguished from impact-derived regolith, impact-derived soils of different geologic affinity (e.g., highlands, maria) can be distinguished on the basis of their constituent minerals, and soil maturity can be estimated. The total resonant absorption area of the Moessbauer spectrum can be used to estimate total FeO concentrations.

Morris, Richard V.↗
NASA NTRS1990

Titanium oxide Magneli phases in four chondritic porous interplanetary dust particles

Detailed analytical electron microscope analyses of four fine-grained chondritic porous interplanetary dust particles (IDPs) reveal the presence of titanium oxide Magneli phases, Ti(n)O(2n-1) (n = 4, 5, 6), and rare Ti-metal. The association of Magneli phases, Ti-metal, and carbonaceous material in chondritic IDPs, along with the grain size distributions of Ti-metal and Magneli phases and equilibrium dissociation pressures for these oxygen-deficient Ti-oxides, support in situ solid carbon gasification in these extraterrestrial particles. The active catalyst in this process is titanium metal that may be of interstellar origin. A model is proposed that explains the higher solid carbon content of chondritic IDPs relative to bulk carbon abundances typical for carbonaceous chondrite matrices that represent another type of more metamorphosed undifferentiated solar system bodies.

Rietmeijer, E. J. M.↗
NASA NTRS1996

The Quantum Phase-Dynamical Properties of the Squeezed Vacuum State Intensity-Couple Interacting with the Atom

The Phase-dynamical properties of the squeezed vacuum state intensity-couple interacting with the two-level atom in an ideal cavity are studied using the Hermitian phase operator formalism. Exact general expressions for the phase distribution and the associated expectation value and variance of the phase operator have been derived. we have also obtained the analytic results of the phase variance for two special cases-weakly and strongly squeezed vacuum. The results calculated numerically show that squeezing has a significant effect on the phase properties of squeezed vacuum.

Fan, An-Fu↗
NASA NTRS1966

Some Aspects of an Air-Core Single-Coil Magnetic Suspension System

This paper presents some of the technical aspects in the development at the Langley Research Center of an air-cove, dual-wound, single-coil, magnetic-suspension system with one-dimensional control. Overall electrical system design features and techniques are discussed in addition to the problems of control and stability. Special treatment is given to the operation of a dual-wound, high-current support coil which provides the bias fields and superimposed modulated field. Other designs features include a six-phase, solid-state power stage for modulation of the relatively large magnitude control current, and an associated six-phase trigger circuit.

SUPPORT SYSTEM↗
NASA NTRS1979

Phase conjugation method and apparatus for an active retrodirective antenna array

An active retrodirective antenna array wherein a reference array element is used to generate a phase reference which is replicated at succeeding elements of the array. Each element of the array is associated with a phase regeneration circuit and the phase conjugation circuitry of an adjacent element. In one implementation, the phase reference circuit operates on the input signal at the reference element, a voltage controlled oscillator (VCO) output signal and the input pilot signal at the next array element received from a transmission line. By proper filtering and mixing, a phase component may be produced to which the VCO may be locked to produce the phase conjugate of the pilot signal at the next array element plus a transmission line delay. In another implementation, particularly suited for large arrays in space, two different input pilot frequencies are employed.

Tausworthe, R. C.↗