Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical second harmonic generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

122 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Vacuum deposition of χ(2) nonlinear organic single crystal films on silicon

Integrating second order nonlinear (χ(2)) optical materials on chip is an ongoing challenge for Si photonics. Noncentrosymmetric molecular crystals have the potential to deliver high χ(2) nonlinearity with good thermal stability, but so far have been limited to growth from solution or the melt, which are both difficult to control and scale up in manufacturing. Here, we show that large (>100 μm) single crystal domains of the nonlinear molecule 2-[3-(4-hydroxystyryl)-5,5-dimethylcyclohex-2-enylidene] malononitrile (OH1) can be grown monolithically on either glass or Si via vacuum evaporation, followed by a short thermal annealing step. The crystallites are tens of nanometer thick and exhibit strong second harmonic generation with their primary χ(2) tensor component lying predominantly in plane. Remarkably, we find that a single domain can grow uninterrupted through nearby channels etched on a Si wafer, which may provide a path to integrate OH1 on Si or Si3N4 waveguides for a broad range of χ(2)-based photonic integrated circuit functionality.

Physics↗
NASA NTRS1988

Millimeter-wave diode-grid frequency doubler

Monolithic diode grids were fabricated on 2-cm square gallium-arsenide wafers in a proof-of-principle test of a quasi-optical varactor millimeter-wave frequency multiplier array concept. An equivalent circuit model based on a transmission-line analysis of plane wave illumination was applied to predict the array performance. The doubler experiments were performed under far-field illumination conditions. A second-harmonic conversion efficiency of 9.5 percent and output powers of 0.5 W were achieved at 66 GHz when the diode grid was pumped with a pulsed source at 33 GHz. This grid had 760 Schottky-barrier varactor diodes. The average series resistance was 27 ohms, the minimum capacitance was 18 fF at a reverse breakdown voltage of -3 V. The measurements indicate that the diode grid is a feasible device for generating watt-level powers at millimeter frequencies and that substantial improvement is possible by improving the diode breakdown voltage.

Jou, Christina F.↗
DOE OSTI2024

Optical and electronic functionality arising from controlled defect formation in nanoscale complex oxide lateral epitaxy

Epitaxial crystallization of complex oxides provides the means to create materials with precisely selected composition, strain, and orientation, thereby controlling their functionalities. Extending this control to nanoscale three-dimensional geometries can be accomplished via a three-dimensional analog of oxide solid-phase epitaxy, lateral epitaxial crystallization. The orientation of crystals within laterally crystallized SrTiO 3 systematically changes from the orientation of the SrTiO 3 substrate. This evolution occurs as a function of lateral crystallization distance, with a rate of approximately 50° μm -1 . The mechanism of the rotation is consistent with a steady-state stress of tens of megapascal over a 100–nanometer scale region near the moving amorphous/crystalline interface arising from the amorphous-crystalline density difference. Second harmonic generation and piezoelectric force microscopy reveal that the laterally crystallized SrTiO 3 is noncentrosymmetric and develops a switchable piezoelectric response at room temperature, illustrating the potential to use lateral crystallization to control the functionality of complex oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Symmetric second-harmonic generation in sub-wavelength periodically poled thin film lithium niobate

Second-harmonic generation (SHG) extensively employs periodically poled nonlinear crystals through forward quasi-phase-matching to achieve efficient frequency conversion. As poling periods approach sub-micrometers, backward quasi-phase-matching has also been demonstrated, albeit by utilizing pulsed laser drives. The realization of symmetric second-harmonic generation, characterized by counterpropagating pumps, however, has remained elusive despite theoretical predictions. The main challenge lies in achieving strong nonlinear coupling with the poling period below half the wavelength of the second-harmonic light. The recent emergence of high-quality ferroelectric lithium niobate thin films provides an opportunity for achieving precise domain control at submicron dimensions. In this paper, we demonstrate reliable control of ferroelectric domains in a thin film lithium niobate waveguide with a poling period down to 370 nm, thereby realizing highly efficient continuous-wave pumped symmetric SHG. This demonstration not only validates the feasibility of achieving subwavelength periodic poling on waveguides but could also enable submicron ferrolectric domain structures to be leveraged in integrated photonics and nonlinear optics research.

Optics↗
DOE OSTI2025

Reliable Determination of Pulses and Pulse-Shape Instability in Ultrashort Laser Pulse Trains Using Polarization-Gating and Transient-Grating Frequency-Resolved Optical Gating Using the RANA Approach

Devices that measure the presence of instability in the pulse shapes in trains of ultrashort laser pulses do not exist, so this task necessarily falls to pulse-measurement devices, like Frequency-Resolved Optical Gating (FROG) and its variations, which have proven to be a highly reliable class of techniques for measuring stable trains of ultrashort laser pulses. Fortunately, multi-shot versions of FROG have also been shown to sensitively distinguish trains of stable from those of unstable pulse shapes by displaying readily visible systematic discrepancies between the measured and retrieved traces in the presence of unstable pulse trains. However, the effects of pulse-shape instability and algorithm stagnation can be indistinguishable, so a never-stagnating algorithm—even when instability is present—is required and is generally important. In previous work, we demonstrated that our recently introduced Retrieved-Amplitude N-grid Algorithmic (RANA) approach produces highly reliable (100%) pulse-retrieval in the second-harmonic-generation (SHG) version of FROG for thousands of sample trains of pulses with stable pulse shapes. Further, it does so even for trains of unstable pulse shapes and thus both reliably distinguishes between the two cases and provides a rough measure of the degree of instability as well as a reasonable estimate of most typical pulse parameters. Here, we perform the analogous study for the polarization-gating (PG) and transient-grating (TG) versions of FROG, which are often used for higher-energy pulse trains. We conclude that PG and TG FROG, coupled with the RANA approach, also provide reliable indicators of pulse-shape instability. In addition, for PG and TG FROG, the RANA approach provides an even better estimate of a typical pulse in an unstable pulse train than SHG FROG does, even in cases of significant pulse-shape instability.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Multiresolution Quantum Chemistry: Nonlinear Response Properties at the Basis Set Limit

We benchmark the accuracy of Dunning correlation-consistent Gaussian basis sets for computing frequencydependent second-order hyperpolarizabilities relevant to second-harmonic generation (SHG), using multiresolution analysis (MRA) as a reference. Basis set errors are analyzed using a unit-sphere representation of the effective hyperpolarizability vector, enabling direct assessment of directional error structure. We introduce a relative RMS total error metric that integrates directional deviations over the unit sphere and complement it with signed projection errors that distinguish over- and underestimation. Unsupervised clustering based on these signed directional metrics reveals four distinct convergence behaviors across a set of 68 molecules. Unitsphere visualizations of representative systems show that basis set errors are often highly anisotropic and localized along specific bond directions, even when global error measures appear small. Doubly augmented basis sets consistently outperform singly augmented ones, and core-polarization functions are required for uniform convergence in second-row systems. Overall, this work demonstrates that directional analysis combined with clustering provides a robust framework for understanding basis set convergence in nonlinear optical response properties.

Basis sets↗
DOE OSTI2024

FeSi 4 P 4 and CoSi 3 P 3 : Hidden Gems of Ternary Tetrel Pnictides with Outstanding Nonlinear Optical Properties

Metal silicon phosphides have shown promise as nonlinear optical materials. To be practically useful and cheap, earth-abundant 3d transition metals are preferred over their scarcer and more expensive 4d and 5d counterparts. Here, we developed a synthetic method to produce polycrystalline bulk powders and millimeter-sized single crystals of ternary compounds FeSi 4 P 4 and CoSi 3 P 3 . Both studied compounds have noncentrosymmetric and chiral crystal structures with ordered Si/P arrangements as was confirmed by single-crystal X-ray diffraction and solid-state NMR. Despite the presence of the transition metal, FeSi 4 P 4 and CoSi 3 P 3 are semiconductors with direct band gaps of 1.3 and 1.6 eV, respectively, indicating low-spin d 6 electronic configuration for octahedral Fe 2+ and Co 3+ . Relative to reported sulfide materials, FeSi 4 P 4 and CoSi 3 P 3 small band gap semiconductors demonstrate an outstanding combination of second-harmonic generation (SHG) activity and laser damage threshold (LDT). Both studied materials are phase-matchable with a 2.09 μm laser and not only exhibit 2.5–3.0 times stronger SHG signal than that of the state-of-the-art AgGaS 2 standard but also demonstrate an LDT response of 2.3–2.5 times higher than that of AgGaS 2 (at 1.09 μm laser with a pulse width of 10 ns)-which is unprecedented for small band gap semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Second harmonic Bessel-Gauss beam shaping with elliptic axicon aberrations

The second harmonic (SH) of an axicon generated Bessel-Gauss beam is created through the nonlinear interaction of photons with a crystal, resulting in the energy doubling of the output photons. In this work, we show experimentally that in addition to frequency doubling, the SH of Bessel-Gauss beams under asymmetric aberrations from an elliptic axicon exhibit intriguing beam formation. Particularly, the central region of the SH beam profile is composed of two central spots of various geometries surrounded by nested ellipses; one of which is the configuration of two central gamma dots with similar radius knotted by nested ellipses for a zeroth-order Bessel-Gauss pump. These SH beams consistently maintain their spatial profile throughout propagation, reminiscing the behavior of screw dislocations in wave patterns. Our numerical simulations produce beam dynamics consistent with that of experiments and further implicate the remarkable interweaving of bright spots with dark vortices. This is especially noticeable when the beams dynamically oscillate along the optical axis, resulting in the genesis of spatially polarized beams with a knotted framework. The insights gained from our study establish a novel paradigm for exploring interactions of Bessel-like beams with vortex dynamics. This, in turn, has the potential to spark innovations in optical applications, fostering new methodologies to harness and manipulate complex light structures. Our experimental findings could spur new methods of generating logical states of light and new opportunities for material processing control. Published by the American Physical Society 2025

Wang, Tianhong (ORCID:0000000169104201)↗
NASA NTRS1995

Observations of the X-ray Nova GRO J0422+32. 1: Outburst and the decay to quiescence

We present optical photometry and spectroscopy and Burst and Transient Source Experiment (BATSE) observations of the X-ray nova GRO J0422+32, obtained during outburst and its subsequent decay to quiescence. Although the X-ray and optical properties of GRO J0422+32 are broadly similar to those of other X-ray novae, it is unique in several respects. The unusually protracted decay to quiescence of the optical light curve has been punctuated by at least two minioutbursts of approximately 4 mag. The BATSE and optical outbursts are each separated by approximately 120 days. We find that the optical luminosity of GRO J0422+32 during the primary outburst is dominated by reprocessing of E greater than 10 keV X-rays. In contrast, the optical minioutbursts are most likely generated by an intrinsically bright disk rather than X-ray reprocessing: they do not appear to have any X-ray counterparts. Extremely broad (up to 6000 km/s FWZI) absorption lines have also been observed during both primary outbursts and minioutbursts. During the second minioutburst, H-alpha and H-beta emission was observed superposed on redshifted absorption features. We find that the interoutburst light curve of GRO J0422+32 may be inconsistent with an accretion disk instability as the origin of the minioutbursts. Finally, a transient 5.1/10.2 hr modulation, which may be related to the orbital period, has been observed during roughly half of our observations. However, confirmation of the orbital period must await observations in quiescence.

Callanan, Paul J.↗
NASA NTRS1990

Design and fabrication of a long-life Stirling cycle cooler for space application. Phase 3: Prototype model

A second-generation, Stirling-cycle cryocooler (cryogenic refrigerator) for space applications, with a cooling capacity of 5 watts at 65 K, was recently completed. The refrigerator, called the Prototype Model, was designed with a goal of 5 year life with no degradation in cooling performance. The free displacer and free piston of the refrigerator are driven directly by moving-magnet linear motors with the moving elements supported by active magnetic bearings. The use of clearance seals and the absence of outgassing material in the working volume of the refrigerator enable long-life operation with no deterioration in performance. Fiber-optic sensors detect the radial position of the shafts and provide a control signal for the magnetic bearings. The frequency, phase, stroke, and offset of the compressor and expander are controlled by signals from precision linear position sensors (LVDTs). The vibration generated by the compressor and expander is cancelled by an active counter balance which also uses a moving-magnet linear motor and magnetic bearings. The driving signal for the counter balance is derived from the compressor and expander position sensors which have wide bandwidth for suppression of harmonic vibrations. The efficiency of the three active members, which operate in a resonant mode, is enhanced by a magnetic spring in the expander and by gas springs in the compressor and counterbalance. The cooling was achieved with a total motor input power of 139 watts. The magnetic-bearing stiffness was significantly increased from the first-generation cooler to accommodate shuttle launch vibrations.

Keung, C.↗
DOE OSTI2025

Tailored Frequency Conversion in Nonlinear Subwavelength Grating Metaslabs

The use of metaslab waveguides consisting of subwavelength gratings (SWGs) is proposed as a highly flexible approach to obtain phase‐matched frequency conversion in nonlinear integrated devices. Control over the phase matching (PM) condition is achieved through modification of the linear modal propagation constants by the SWG. The method is experimentally demonstrated by fabrication of 0.4 mm‐long GaAs metaslabs designed for second harmonic generation of near‐infrared light. A controlled spectral shift of up to 100 nm in the PM condition, relative to a uniform slab is observed. Excellent agreement is found between the experimental results and finite‐difference eigenmode simulations, which predict a tunable frequency conversion bandwidth of ∼300 nm for the design parameters. The different regimes of PM control supported by the structure are discussed. This work highlights the potential of SWGs as building blocks for tailored frequency conversion in nonlinear integrated devices.

Form birefringence↗
DOE OSTI2025

Ultrafast simultaneous manipulation of multiple ferroic orders through nonlinear phonon excitation

Recent experimental studies have demonstrated the possibility of utilizing strong terahertz pulses to manipulate individual ferroic orders on pico- and femtosecond timescales. Here, we extend these findings and showcase the simultaneous manipulation of multiple ferroic orders in BiFeO 3 , a material that is both ferroelectric and antiferromagnetic at room temperature. We find a concurrent enhancement of ferroelectric and antiferromagnetic second-harmonic generation (SHG) following the resonant excitation of a high-frequency fully-symmetric phonon mode. Based on first-principles calculations and phenomenological modeling, we ascribe this observation to the inherent coupling of the two ferroic orders to the nonequilibrium distortions induced in the crystal lattice by nonlinearly driven phonons. Our finding highlights the potential of nonlinear phononics as a technique for manipulating multiple ferroic order parameters at once. In addition, this approach provides a promising avenue to studying the dynamical magnetic and polarization behavior, as well as their intrinsic coupling, on ultrashort timescales.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Submillimeter Laboratory Investigations: Spectroscopy and Collisions

Currently, millimeter-wave and submillimeter-wave spectroscopy is conducted in our laboratory on several different types of spectrometers. Our standard spectrometer utilizes the output of a phase-locked klystron operating in the 40-60 GHz region, which is sent into a crossed-waveguide harmonic generator, or "multiplier". The high frequency millimeter-and submillimeter-wave radiation is transmitted via quasi-optical techniques through an absorption cell and then onto a detector, which is either an InSb hot electron bolometer cooled to 1.4 K or a Si bolometer cooled to 0.3 K. The detector response is sent to a computer for measurement and analysis. The frequency range produced and detected in this manner goes from 80 GHz to upwards of 1 THz. Spectra are normally taken with source modulation, with line frequencies typically measured to an accuracy of 50-100 kHz. Higher accuracy is available when needed. Recently, we developed a new, broad-band spectrometer in our laboratory based on a free-running backward wave oscillator (BWO) of Russian manufacture as the primary source of radiation. The so-called FASSST (fast-scan submillimeter spectroscopic technique) system uses fast-scan and optical calibration methods rather than the traditional locking techniques. The output power from the BWO is split such that 90% goes into the absorption cell while 10% is coupled to a 40-meter Fabry-Perot cavity, which yields fringe? for frequency measurement. Results from this spectrometer on the spectrum of nitric acid (HNO3) show that 100 GHz of spectral data can be obtained in 5 seconds with a measurement accuracy of 50 kHz. Currently, the frequency range of the FASSST system in our laboratory is roughly 100-700 GHz.

Herbst, Eric↗
DOE OSTI2026

Second Harmonic Generation Electric Field Triplet Interferometry for Absolute Phasing

We report second harmonic generation (SHG) electric field triplet interferometry performed using three mutually coherent ultrafast pulses in a common path with controllable relative phases, namely, the light fields of a sample signal (SI), a reference oscillator (RO), and a local oscillator (LO). The ROLO phase determined from the interference of the light fields produced by two quartz wafers is subtracted from the phase determined from the SIROLO interferogram to yield the signal phase, ϕ SI . The new method also calibrates the measured SHG intensity from a given sample internally by sending the fundamental light field reflected from the sample into one of the quartz wafers in the ROLO element. The approach avoids having to exchange the sample against a reference material with a known χ(2) value or known phase and accounts on-the-fly for situations where the reflected fundamental light field intensity changes with experimental conditions. The new method is successfully benchmarked against z-cut α-quartz, fused silica held at its point of zero charge, and hematite nanolayers in air, across three different interferometers. Furthermore, the approach should be applicable for other second-order nonlinear spectroscopies, such as vibrational or electronic sum-frequency generation.

Interfaces↗