Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Search for Intermediate Mass Black Hole Binaries in the First and Second Observing Runs of the Advanced LIGO and VIRGO Network

Gravitational-wave astronomy has been firmly established with the detection of gravitational waves from the merger of ten stellar-mass binary black holes and a neutron star binary. This paper reports on the all-sky search for gravitational waves from intermediate mass black hole binaries in the first and second observing runs of the Advanced LIGO and Virgo network. The search uses three independent algorithms: two based on matched filtering of the data with waveform templates of gravitational-wave signals from compact binaries, and a third, model-independent algorithm that employs no signal model for the incoming signal. No intermediate mass black hole binary event is detected in this search. Consequently, we place upper limits on the merger rate density for a family of intermediate mass black hole binaries. In particular, we choose sources with total masses 𝑀=𝑚1+𝑚2∈[120,800] 𝑀⊙ and mass ratios 𝑞=𝑚2/𝑚1∈[0.1,1.0]. For the first time, this calculation is done using numerical relativity waveforms (which include higher modes) as models of the real emitted signal. We place a most stringent upper limit of 0.20 Gpc−3 yr−1 (in comoving units at the 90% confidence level) for equal-mass binaries with individual masses 𝑚1,2=100 𝑀⊙ and dimensionless spins 𝜒1,2=0.8 aligned with the orbital angular momentum of the binary. This improves by a factor of ∼5 that reported after Advanced LIGO’s first observing run.

B. P. Abbott↗

A Polynomial Time, Numerically Stable Integer Relation Algorithm

Let x = (x1, x2...,xn be a vector of real numbers. X is said to possess an integer relation if there exist integers a(sub i) not all zero such that a1x1 + a2x2 + ... a(sub n)Xn = 0. Beginning in 1977 several algorithms (with proofs) have been discovered to recover the a(sub i) given x. The most efficient of these existing integer relation algorithms (in terms of run time and the precision required of the input) has the drawback of being very unstable numerically. It often requires a numeric precision level in the thousands of digits to reliably recover relations in modest-sized test problems. We present here a new algorithm for finding integer relations, which we have named the "PSLQ" algorithm. It is proved in this paper that the PSLQ algorithm terminates with a relation in a number of iterations that is bounded by a polynomial in it. Because this algorithm employs a numerically stable matrix reduction procedure, it is free from the numerical difficulties, that plague other integer relation algorithms. Furthermore, its stability admits an efficient implementation with lower run times oil average than other algorithms currently in Use. Finally, this stability can be used to prove that relation bounds obtained from computer runs using this algorithm are numerically accurate.

Ferguson, Helaman R. P.↗

Numerical results on relations between fundamental constants using a new algorithm

An efficient algorithm is described for finding whether or not certain fundamental mathematical constants satisfy simple algebraic polynomials. The algorithm, which finds whether an integer relation exists for a vector of real numbers, or else establishes bounds within which no relation can exist. The algorithm is implemented on high-speed computers, using multiprecision arithmetic. Numerical results are summarized, and other possible applications for the algorithm are discussed.

Bailey, David H.↗

Numerical prediction experiments related to the summer 1980 U.S. heat wave

The GLA (Goddard Laboratory for Atmosphere) fourth-order model predictions of the summer 1980 heat wave are examined to assess the skill of the model in numerically forecasting the initiation of the heat wave and the sensitivity of the model predictions to initial conditions and boundary forcing. Results of experiments indicate that the model predictions are sensitive to the initial conditions. The sensitivity of the model to anomalous boundary forcing is found to be generally larger than its sensitivity to initial conditions at extended ranges. The results of the study suggest that models may be useful in forecasting similar events if adequate determinations of the evolving boundary forcing can be made in real time.

Atlas, R.↗

A numerical method for relating two- and three-dimensional pressure distributions on transonic wings

This paper presents a preliminary design method for determining a wing's design pressure distribution and geometry based on airfoil normal Mach numbers and airfoil loading. In this method, the perturbation velocities in supercritical regions are computed from airfoil transonic normal Mach numbers and include the influence of local sweep, taper, and three-dimensional induced velocities, so that the appearance and strength of shocks can be expected to resemble those of the airfoil. The velocities in subcritical wing regions are scaled first with simple sweep theory, and then to achieve the desired load distribution. The method was applied to the design of an oblique flying wing, using a linear potential method. The required wing area could be reduced by 14 percent using this method rather than simple sweep theory.

Kroo, Ilan↗

The IAB Iron-Meteorite Complex: A Group, Five Subgroups, Numerous Grouplets, Closely Related, Mainly Formed by Crystal Segregation in Rapidly Cooling Melts

We present new data or iron meteorites that are members of group IAB or are closely related to this large group, and we have also reevaluated some of our earlier data for these irons. In the past it was not possible to distinguish IAB and IIICD irons on the basis of their positions on element-Ni diagrams. We now find that plotting, the new and revised data yields six sets of compact fields on element-Au diagrams, each set corresponding to a compositional group. The largest set includes the majority (approximately equal to 70) of irons previously designated IA: We christened this set the IAB main group. The remaining five sets we designate subgroups within the IAB complex. Three of these subgroups have Au contents similar to the main group, and form parallel trends in most element-Ni diagrams. The groups originally designated IIIC and IIID are two of these subgroups: they are now well resolved from each other and from the main group. The other low-Au subgroup has Ni contents just above the main group. Two other IAB subgroups have appreciably higher Au contents than the main group and show weaker compositional links to it. We have named these five subgroups on the basis of their Au and Ni contents. The three subgroups having Au contents similar to the main group are the low-Au (L) subgroups the two others the high-Au (H) subgroups. The Ni contents are designated high (H), medium (M), or low (L). Thus the old group IIID is now the sLH subgroup. the old group IIIC is the sLM subgroup. In addition, eight irons assigned to two grouplets plot between sLL and sLM on most element-Au diagrams. A large number (27) of related irons plot outside these compact fields but nonetheless appear to be sufficiently related to also be included in the IAB complex.

Wasson, J. T.↗

Numerical Methods For Chemically Reacting Flows

Issues related to numerical stability, accuracy, and resolution discussed. Technical memorandum presents issues in numerical solution of hyperbolic conservation laws containing "stiff" (relatively large and rapidly changing) source terms. Such equations often used to represent chemically reacting flows. Usually solved by finite-difference numerical methods. Source terms generally necessitate use of small time and/or space steps to obtain sufficient resolution, especially at discontinuities, where incorrect mathematical modeling results in unphysical solutions.

Leveque, R. J.↗

A comparison between implicit and hybrid methods for the calculation of steady and unsteady inlet flows

Numerical simulation of steady and unsteady transonic diffuser flows using two different computer codes are discussed and compared with experimental data. The codes solve the Reynolds-averaged, compressible, Navier-Stokes equations using various turbulence models. One of the codes has been applied extensively to diffuser flows and uses the hybrid method of MacCormack. This code is relatively inefficient numerically. The second code, which was developed more recently, is fully implicit and is relatively efficient numerically. Simulations of steady flows using the implicit code are shown to be in good agreement with simulations using the hybrid code. Both simulations are in good agreement with experimental results. Simulations of unsteady flows using the two codes are in good qualitative agreement with each other, although the quantitative agreement is not as good as in the steady flow cases. The implicit code is shown to be eight times faster than the hybrid code for unsteady flow calculations and up to 32 times faster for steady flow calculations. Results of calculations using alternative turbulence models are also discussed.

Coakley, T. J.↗

Turbulence, Transition, and Numerical Method Technologies

The close collaboration in the validation experimentation effort was excellent, the complementary research efforts related tofundamental numerical model development, and the activities related to effective HPC utilization on near term architectures that are coming down the pipeline were exactly what NASA should be doing. Even though the TQR panel cannot say that the success criteria were fully met, we do feel that the research funded by TTT/RCA was successful and useful in determining the next suite of CFD validation tests and the problematic flow conditions that continue to be difficult to predict using our current suite of computational tools. Given the TQR Panel’s review criteria: 1. The deliverables meet the technical requirements; 2.The appropriate technical approaches were followed in producing the deliverables; and 3. All technical caveats and concerns have been identified and the deliverables: a.Development of more accurate physics-based methods (e.g., higher moment closure); b. Large eddy simulation (LES); c. Advanced numerical methods; d. Transition prediction and modeling; e.Validation experiments; f. Multidisciplinary analysis and design (high fidelity). TQR panel feels that the technical processes were all completed and that the review criteria and all the deliverables were met. Thus, the Milestone TACP-2016-001 has been completed.

Mujeeb R Malik↗

The relative merits of several numerical techniques for solving the compressible Navier-Stokes equations

Four explicit finite difference techniques designed to solve the time-dependent, compressible Navier Stokes equations are compared. These techniques are: (1) MacCormack, (2) modified Du Fort-Frankel, (3) modified hopscotch, and (4) Brailovskaya. The comparison was made numerically by solving the quasi-one dimensional Navier Stokes equations for the flow in a converging-diverging nozzle. Solutions with and without standing normal shock waves were computed for unit Reynolds numbers (based on total conditions) ranging from 45374 to 2269. The results indicate that all four techniques are comparable in accuracy; however, the modified hopscotch scheme is two to three times faster than the Brailovskaya and MacCormack schemes and three to six times faster than the modified Du Fort-Frankel scheme.

Holst, T. L.↗

Geostrophic adjustment in a shallow-water numerical model as it relates to thermospheric dynamics

The theory of geostrophic adjustment and its application to the dynamics of the high latitude thermosphere have been discussed in previous papers based on a linearized treatment of the fluid dynamical equations. However, a linearized treatment is only valid for small Rossby numbers given by Ro = V/fL, where V is the wind speed, f is the local value of the Coriolis parameter, and L is a characteristic horizontal scale for the flow. For typical values in the auroral zone, the approximation is not reasonable for wind speeds greater than 25 m/s or so. A shallow-water (one layer) model was developed that includes the spherical geometry and full nonlinear dynamics in the momentum equations in order to isolate the effects of the nonlinearities on the adjustment process. A belt of accelerated winds between 60 deg and 70 deg latitude was used as the initial condition. The adjustment process was found to proceed as expected from the linear formulation, but that an asymmetry between the response for an eastward and westward flow results from the nonlineawr curvature (centrifugal) terms. In general, the amplitude of an eastward flowing wind will be less after adjustment than a westward wind. For instance, if the initial wind velocity is 300 m/s, the linearized theory predicts a final wind speed of 240 m/s, regardless of the flow direction. However, the nonlinear curvature terms modify the response and produce a final wind speed of only 200 m/s for an initial eastward wind and a final wind speed of almost 300 m/s for an initial westward flow direction. Also, less gravity wave energy is produced by the adjustment of the westward flow than by the adjustment of the eastward flow. The implications are that the response of the thermosphere should be significantly different on the dawn and dusk sides of the auroral oval. Larger flow velocities would be expected on the dusk side since the plasma will accelerate the flow in a westward direction in that sector.

Larsen, M. F.↗

A numerical simulation of magnetic reconnection and radiative cooling in line-tied current sheets

Radiative MHD equations are used for an optically thin plasma to carry out a numerical experiment related to the formation of 'postflare' loops. The numerical experiment starts with a current sheet that is in mechanical and thermal equilibrium but is unstable to both tearing-mode and thermal-condensation instabilities. The current sheet is line-tied at one end to a photospheric-like boundary and evolves asymmetrically. The effects of thermal conduction, resistivity variation, and gravity are ignored. In general, reconnection in the nonlinear stage of the tearing-mode instability can strongly affect the onset of condensations unless the radiative-cooling time scale is much smaller than the tearing-mode time scale. When the ambient plasma is less than 0.2, the reconnection enters a regime where the outflow from the reconnection region is supermagnetosonic with respect to the fast-mode wave speed. In the supermagnetosonic regime the most rapidly condensing regions occur downstream of a fast-mode shock that forms where the outflow impinges on closed loops attached to the photospheric-like boundary. A similar shock-induced condensation might occur during the formation of 'postflare' loops.

Forbes, T. G.↗

Statistical and numerical study of the relation between weather and sonic boom characteristics

NASA measured sonic boom characteristics near Edwards Air Force Base from 11/66 to 1/67. Thirty four flights by an F-104 were recorded at an altitude of about 31,000 feet and flying speed of Mach 1.3. Forty two microphones were placed on the ground directly under the fight track. Each microphone recorded boom shape, rise time, peak overpressure, total boom duration, positive duration, and positive impulse.

Yao, Lixin↗

Numerical Investigation of Dual-Mode Scramjet Combustor with Large Upstream Interaction

Dual-mode scramjet combustor configuration with significant upstream interaction is investigated numerically, The possibility of scaling the domain to accelerate the convergence and reduce the computational time is explored. The supersonic combustor configuration was selected to provide an understanding of key features of upstream interaction and to identify physical and numerical issues relating to modeling of dual-mode configurations. The numerical analysis was performed with vitiated air at freestream Math number of 2.5 using hydrogen as the sonic injectant. Results are presented for two-dimensional models and a three-dimensional jet-to-jet symmetric geometry. Comparisons are made with experimental results. Two-dimensional and three-dimensional results show substantial oblique shock train reaching upstream of the fuel injectors. Flow characteristics slow numerical convergence, while the upstream interaction slowly increases with further iterations. As the flow field develops, the symmetric assumption breaks down. A large separation zone develops and extends further upstream of the step. This asymmetric flow structure is not seen in the experimental data. Results obtained using a sub-scale domain (both two-dimensional and three-dimensional) qualitatively recover the flow physics obtained from full-scale simulations. All results show that numerical modeling using a scaled geometry provides good agreement with full-scale numerical results and experimental results for this configuration. This study supports the argument that numerical scaling is useful in simulating dual-mode scramjet combustor flowfields and could provide an excellent convergence acceleration technique for dual-mode simulations.

Mohieldin, T. O.↗

Numerical analysis of some problems related to the mechanics of pneumatic tires: Finite deformation/rolling contact of a viscoelastic cylinder and finite deformation of cord-reinforced rubber composites

The formulation and numerical analysis of several problems related to the behavior of pneumatic tires are considered. These problems include the general rolling contact problem of a rubber-like viscoelastic cylinder undergoing finite deformations and the finite deformation of cord-reinforced rubber composites. New finite element models are developed for these problems. Numerical results obtained for several representative cases are presented.

Oden, J. T.↗

Estimation of material properties of a nonlinearly elastic bar

A method of determining certain characteristic flexural rigidities and elastic properties of nonlinearly elastic materials is presented. An estimation method utilizing perturbation methods and a least squares fitting technique is used to solve the nonlinear differential equation derived from the moment curvature relation, subject to boundary values representing deflections of the bar at discrete points. Deflection data from numerical simulations of a nonlinearly elastic, prismatic bar are used to demonstrate the estimation method. Numerical experiments relating the accuracy of the identification to the number and accuracy of the boundary values are presented. Conclusions based on the numerical experiments are included.

Baker, B. E.↗