Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrogen dioxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

NO, NO2. NOx measurements; SGP GIF; May 2023

This file contains measurements of nitric oxide (NO), nitrogen dioxide (NO2), and nitrogen oxides (NOx = NO + NO2). Measurements were made using a Teledyne NO-NOx Analyzer Model T200UP. Zeros were conducted daily and calibrations were completed at the end of the campaign. The instrument was located at the Atmospheric Radiation Measurement Southern Great Plains Guest Instrumentation Facility and measured from April 30, 2023 to May 31, 2023. The file is in ICARTT format.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Separation and Detection of Toxic Gases with a Silicon Micromachined Gas Chromatography System

A miniature gas chromatography (GC) system was designed and fabricated using silicon micromachining and integrated circuit (IC) processing techniques. The silicon micromachined gas chromatography system (SMGCS) is composed of a miniature sample injector that incorporates a 10 microliter sample loop; a 0.9 meter long, rectangular shaped (300 micrometer width and 10 micrometer height) capillary column coated with a 0.2 micrometer thick copper phthalocyanine (CuPc) stationary phase; and a dual detector scheme based upon a CuPc-coated chemiresistor and a commercially available 125 micrometer diameter thermal conductivity detector (TCD) bead. Silicon micromachining was employed to fabricate the interface between the sample injector and the GC column, the column itself, and the dual detector cavity. A novel IC thin-film processing technique was developed to sublime the CuPc stationary phase coating on the column walls that were micromachined in the host silicon wafer substrate and Pyrex (r) cover plate, which were then electrostatically bonded together. The SMGCS can separate binary gas mixtures composed of parts-per-million (ppm) concentrations of ammonia (NH3) and nitrogen dioxide (NO2) when isothermally operated (55-80 degrees C). With a helium carrier gas and nitrogen diluent, a 10 microliter sample volume containing ammonia and nitrogen dioxide injected at 40 psi ((2.8 x 10(exp 5)Pa)) can be separated in less than 30 minutes.

Kolesar, Edward S.↗
NASA NTRS1993

Chemical loss of ozone in the Arctic polar vortex in the winter of 1991- 1992

In situ measurements of chlorine monoxide, bromine monoxide, and ozone are extrapolated globally, with the use of meteorological tracers, to infer the loss rates for ozone in the Arctic lower stratosphere during the Airborne Arctic Stratospheric Expedition II (AASE II) in the winter of 1991-1992. The analysis indicates removal of 15 to 20 percent of ambient ozone because of elevated concentrations of chlorine monoxide and bromine monoxide. Observations during AASE II define rates of removal of chlorine monoxide attributable to reaction with nitrogen dioxide (produced by photolysis of nitric acid) and to production of hydrochloric acid. Ozone loss ceased in March as concentrations of chlorine monoxide declined. Ozone losses could approach 50 percent if regeneration of nitrogen dioxide were inhibited by irreversible removal of nitrogen oxides (denitrification), as presently observed in the Antarctic, or without denitrification if inorganic chlorine concentrations were to double.

Salawitch, R. J.↗
NASA NTRS1993

Chemical Loss of Ozone in the Arctic Polar Vortex in the Winter of 1991-1992

In situ measurements of chlorine monoxide, bromine monoxide, and ozone are extrapolated globally, with the use of meteorological tracers, to infer the loss rates for ozone in the Arctic lower stratosphere during the Airborne Arctic Stratospheric Expedition II (AASE II) in the winter of 1991-1992. The analysis indicates removal of 15 to 20 percent of ambient ozone because of elevated concentrations of chlorine monoxide and bromine monoxide. Observations during AASE II define rates of removal of chlorine monoxide attributable to reaction with nitrogen dioxide (produced by photolysis of nitric acid) and to production of hydrochloric acid. Ozone loss ceased in March as concentrations of chlorine monoxide declined. Ozone losses could approach 50 percent if regeneration of nitrogen dioxide were inhibited by irreversible removal of nitrogen oxides (denitrification), as presently observed in the Antarctic, or without denitrification if inorganic chlorine concentrations were to double.

Salawitch, R. J.↗
NASA NTRS1975

On the abundance of NO2 in the Martian atmosphere

Spectra of Mars and the moon in the spectral region from 4000 to 5000 A were recorded on October 15, 1973. The effective resolution was approximately 4 A. A ratio spectrum (Mars/Moon) was obtained by computer. No absorption features could be detected in the considered region of the Martian spectrum. An upper limit for the total column density of nitrogen dioxide on Mars was derived. It appears on the basis of the investigation that the upper limit reported by Marshall (1964) for the nitrogen dioxide abundance in the Martian atmosphere is completely valid.

Owen, T.↗
NASA NTRS2001

Information Retrieval from SAGE II and MFRSR Multi-Spectral Extinction Measurements

Direct beam spectral extinction measurements of solar radiation contain important information on atmospheric composition in a form that is essentially free from multiple scattering contributions that otherwise tend to complicate the data analysis and information retrieval. Such direct beam extinction measurements are available from the solar occultation satellite-based measurements made by the Stratospheric and Aerosol Gas Experiment (SAGE II) instrument and by ground-based Multi-Filter Shadowband Radiometers (MFRSRs). The SAGE II data provide cross-sectional slices of the atmosphere twice per orbit at seven wavelengths between 385 and 1020 nm with approximately 1 km vertical resolution, while the MFRSR data provide atmospheric column measurements at six wavelengths between 415 and 940 nm but at one minute time intervals. We apply the same retrieval technique of simultaneous least-squares fit to the observed spectral extinctions to retrieve aerosol optical depth, effective radius and variance, and ozone, nitrogen dioxide, and water vapor amounts from the SAGE II and MFRSR measurements. The retrieval technique utilizes a physical model approach based on laboratory measurements of ozone and nitrogen dioxide extinction, line-by-line and numerical k-distribution calculations for water vapor absorption, and Mie scattering constraints on aerosol spectral extinction properties. The SAGE II measurements have the advantage of being self-calibrating in that deep space provides an effective zero point for the relative spectral extinctions. The MFRSR measurements require periodic clear-day Langley regression calibration events to maintain accurate knowledge of instrument calibration.

Lacis, Andrew A.↗
DOE OSTI2026

Atmospheric Gases as Quantitative Indicators of Urbanization Across Land-Use Gradients

The urban heat island (UHI) effect is a significant phenomenon characterized by higher surface temperatures in cities compared to surrounding rural areas. This change in the Earth's energy balance presents considerable challenges for urban populations, increasing heat exposure, straining energy infrastructure, and exacerbating health vulnerabilities. Quantifying UHI intensity is challenging due to blurred distinctions between urban and rural areas as land-use patterns evolve. To address this challenge, the present study builds on the framework established by Salvador et al. (2025) and investigates the use of atmospheric constituents, specifically volatile organic compounds (VOCs) and inorganic gases, as tracers of urbanization levels. A key improvement in this approach is the inclusion of a designated true rural site for comparison. Field measurements were conducted at two locations in the Southeastern United States during the summer of 2025. Inorganic gases were monitored continuously, while VOC samples were collected biweekly and analyzed using a proton transfer reaction time-of-flight mass spectrometer. The urban site exhibited elevated concentrations of anthropogenic inorganic gases, with carbon monoxide and nitrogen dioxide averaging 878 ppb and 17.99 ppb, respectively. In contrast, the rural site showed lower levels of these pollutants, 796 ppb for carbon monoxide and 12.46 ppb for nitrogen dioxide, while displaying higher concentrations of biogenic VOCs, including isoprene and monoterpenes at 1.24 ppb and 0.08 ppb, respectively. Extended mass spectral analyses revealed distinct chemical differences between the two sites, supporting the observed variability of major gases. Overall, these findings are consistent with our previous research and highlight the value of atmospheric constituents as effective indicators of urbanization, thereby improving our understanding of UHI dynamics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

The global distribution and variability of stratospheric constituents measured by LIMS

The purpose of the Nimbus 7 LIMS experiment was to sound the composition and structure of the upper atmosphere and provide data for study of photochemistry, radiation, and dynamics processes. Vertical profiles were measured of temperature and ozone (O3) over the 10-km to 65-km range and water vapor, nitrogen dioxide, and nitric acid over the 10-km to 50-km range. Latitude coverage extended from 64 deg S to 84 deg N. Several general features of the atmosphere have emerged from data analyzes thus far. Nitrogen dioxide exhibits rapid latitudinal variations in winter and shows hemispheric asymmetry with generally higher vertical column amount in the summer hemisphere. HNO3 data show that this gas is highly variable with altitude, latitude, and season. Smallest mixing ratios occur in the tropics, and the largest values occur in the high latitude winter hemisphere. The results show that O3, NO2, and HNO3 are strongly affected during a stratospheric warming.

Russell, J. M., III↗
NASA NTRS2004

High Temperature Decomposition of Hydrogen Peroxide

Nitric oxide (NO) is oxidized into nitrogen dioxide (NO2) by the high temperature decomposition of a hydrogen peroxide solution to produce the oxidative free radicals, hydroxyl and hydropemxyl. The hydrogen peroxide solution is impinged upon a heated surface in a stream of nitric oxide where it decomposes to produce the oxidative free radicals. Because the decomposition of the hydrogen peroxide solution occurs within the stream of the nitric oxide, rapid gas-phase oxidation of nitric oxide into nitrogen dioxide occurs.

Clyde F. Parrish↗
NASA NTRS2005

High temperature decomposition of hydrogen peroxide

Nitric oxide (NO) is oxidized into nitrogen dioxide (NO2) by the high temperature decomposition of a hydrogen peroxide solution to produce the oxidative free radicals, hydroxyl and hydroperoxyl. The hydrogen peroxide solution is impinged upon a heated surface in a stream of nitric oxide where it decomposes to produce the oxidative free radicals. Because the decomposition of the hydrogen peroxide solution occurs within the stream of the nitric oxide, rapid gas-phase oxidation of nitric oxide into nitrogen dioxide occurs.

Clyde F Parrish↗
NASA NTRS2005

High temperature decomposition of hydrogen peroxide

Nitric oxide (NO) is oxidized into nitrogen dioxide (NO2) by the high temperature decomposition of a hydrogen peroxide solution to produce the oxidative free radicals, hydroxyl and hydroperoxyl. The hydrogen peroxide solution is impinged upon a heated surface in a stream of nitric oxide where it decomposes to produce the oxidative free radicals. Because the decomposition of the hydrogen peroxide solution occurs within the stream of the nitric oxide, rapid gas-phase oxidation of nitric oxide into nitrogen dioxide occurs.

Parrish, Clyde F.↗
NASA NTRS2004

High temperature decomposition of hydrogen peroxide

Nitric oxide (NO) is oxidized into nitrogen dioxide (NO.sub.2) by the high temperature decomposition of a hydrogen peroxide solution to produce the oxidative free radicals, hydroxyl and hydroperoxyl. The hydrogen peroxide solution is impinged upon a heated surface in a stream of nitric oxide where it decomposes to produce the oxidative free radicals. Because the decomposition of the hydrogen peroxide solution occurs within the stream of the nitric oxide, rapid gas-phase oxidation of nitric oxide into nitrogen dioxide occurs.

Parrish, Clyde F.↗
NASA NTRS2011

High temperature decomposition of hydrogen peroxide

Nitric oxide (NO) is oxidized into nitrogen dioxide (NO.sub.2) by the high temperature decomposition of a hydrogen peroxide solution to produce the oxidative free radicals, hydroxyl and hydroperoxyl. The hydrogen peroxide solution is impinged upon a heated surface in a stream of nitric oxide where it decomposes to produce the oxidative free radicals. Because the decomposition of the hydrogen peroxide solution occurs within the stream of the nitric oxide, rapid gas-phase oxidation of nitric oxide into nitrogen dioxide occurs.

Parrish, Clyde F.↗
NASA NTRS2017

High-Resolution NO2 Observations from the Airborne Compact Atmospheric Mapper: Retrieval and Validation

Nitrogen dioxide (NO2) is a short-lived atmospheric pollutant that serves as an air quality indicator and is itself a health concern. The Airborne Compact Atmospheric Mapper (ACAM) was flown on board the NASA UC-12 aircraft during the Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality Maryland field campaign in July 2011. The instrument collected hyperspectral remote sensing measurements in the 304-910 nm range, allowing daytime observations of several tropospheric pollutants, including nitrogen dioxide (NO2), at an unprecedented spatial resolution of 1.5 × 1.1 sq. km. Retrievals of slant column abundance are based on the differential optical absorption spectroscopy method. For the air mass factor computations needed to convert these retrievals to vertical column abundance, we include high-resolution information for the surface reflectivity by using bidirectional reflectance distribution function data from the Moderate Resolution Imaging Spectroradiometer. We use high-resolution simulated vertical distributions of NO2 from the Community Multiscale Air Quality and Global Modeling Initiative models to account for the temporal variation in atmospheric NO2 to retrieve middle and lower tropospheric NO2 columns (NO2 below the aircraft). We compare NO2 derived from ACAM measurements with in situ observations from NASA's P-3B research aircraft, total column observations from the ground-based Pandora spectrometers, and tropospheric column observations from the space-based Ozone Monitoring Instrument. The high-resolution ACAM measurements not only give new insights into our understanding of atmospheric composition and chemistry through observation of subsampling variability in typical satellite and model resolutions, but they also provide opportunities for testing algorithm improvements for forthcoming geostationary air quality missions.

Lamsal, L. N.↗
NASA NTRSDate not supplied

Development of TEMPO Products and Tools to Support Air Quality Management Decisions

The TEMPO mission has been observing air pollutants every hour during the daytime across its Field of Regard (FoR) covering greater North America since First Light on August 2, 2023. The highly anticipated public release of TEMPO data occurred on May 20, 2024, consisting of level 2 and level 3 trace gas data products of nitrogen dioxide, formaldehyde, and ozone. Our project at the NASA SPoRT Center is developing value-added products and tools to support the TEMPO mission and Early Adopters program with special attention on the air quality management community. The initial focus of this project is evaluating the TEMPO products over stakeholder target areas using Pandora and surface monitor observations. Methods for oversampling TEMPO data to 1 km resolution are being applied over the target areas to resolve fine-scale emission sources and pollutant gradients. Machine learning techniques using TEMPO, surface monitor, and model data to estimate surface-level nitrogen dioxide concentrations are being developed over the target areas. Our SPoRT viewer has been updated to include visualizations of the TEMPO products and an ArcGIS dashboard is being designed for enabling air quality management stakeholders to efficiently analyze TEMPO data. Training materials including user guides are being developed to ensure the effective and sustained use of TEMPO data in air quality management applications. The major outcome of this project is to support the inclusion of TEMPO data in exceptional event demonstrations by active engagement with stakeholders and ultimately enable more informed air quality management decisions in the future. This talk will provide an update on our project activities and showcase use cases of TEMPO data for monitoring different emission sources including wildland fire smoke.

air quality↗
NASA NTRSDate not supplied

Transitioning TEMPO Data for Air Quality Management Applications at the NASA SPoRT Center

The TEMPO mission has been observing air pollutants every hour during the daytime across its Field of Regard (FoR) covering greater North America since First Light on August 2, 2023. The highly anticipated public release of TEMPO data occurred on May 20, 2024, consisting of level 2 and level 3 trace gas data products of nitrogen dioxide, formaldehyde, and ozone. The NASA SPoRT Center is developing value-added products and tools to support the TEMPO mission and Early Adopters program with special attention on stakeholder from air agencies. One component of our work is focused on evaluating the TEMPO products over stakeholder target areas using Pandora and surface monitor observations to characterize the uncertainties and develop best practices for processing and analyzing TEMPO data. Methods for oversampling TEMPO data to 1 km resolution are being applied over the target areas to resolve fine-scale emission sources and pollutant gradients. Machine learning techniques using TEMPO, surface monitor, and model data to estimate surface-level nitrogen dioxide concentrations are being developed over the target areas. A SPoRT viewer for TEMPO has been launched for providing visualizations of the TEMPO products and an ArcGIS dashboard is being designed for enabling air agency stakeholders to efficiently analyze TEMPO data. Training materials including user guides are being developed to ensure the effective and sustained use of TEMPO data at our stakeholder agencies. One major goal of our TEMPO initiatives at SPoRT is to better enable the inclusion of TEMPO data in air quality management applications such as exceptional event demonstrations through our close engagement with stakeholders. This talk will provide an update on our SPoRT activities and showcase use cases of TEMPO data for monitoring different emission sources including wildland fire smoke.

Air Quality↗
NASA NTRS1982

Lidar measurements of tropospheric gases

Measurements of pollutants and water vapor in the troposphere using the differential absorption lidar (DIAL) technique are described. Measurements are made of sulfur dioxide in power plant plumes with a mobile DIAL system operated near 300 nm. Comparisons of sulfur dioxide concentrations determined with the DIAL system and in-stack monitors are found to be in agreement to within 18%. Vertical water vapor profiles with a ground-based lidar system are measured using the water vapor absorption line at 724.3 nm. Rawinsonde and DIAL water vapor profile data are shown to agree within 10% to an altitude of 2.5 km. Simulations are discussed for airborne DIAL measurements of sulfur dioxide, water vapor, and nitrogen dioxide.

Browell, E. V.↗
NASA NTRS2005

Study Uncovers Dirty Little Secret: Soil Emissions are Much-Bigger-than-Expected Component of Air Pollution

Nitrogen oxides produced by huge fires and fossil fuel combustion are a major component of air pollution. They are the primary ingredients in ground-level ozone, a pollutant harmful to human health and vegetation. But new research led by a University of Washington atmospheric scientist shows that, in some regions, nitrogen oxides emitted by the soil are much greater than expected and could play a substantially larger role in seasonal air pollution than previously believed. Nitrogen oxide emissions total more than 40 million metric tons worldwide each year, with 64 percent coming from fossil fuel combustion, 14 percent from burning and a surprising 22 percent from soil, said Lyatt Jaegle, a UW assistant professor of atmospheric sciences. The new research shows that the component from soil is about 70 percent greater than scientists expected. Instead of relying on scattered ground-based measurements of burning and combustion and then extrapolating a global total for nitrogen oxide emissions, the new work used actual observations recorded in 2000 by the Global Ozone Monitoring Experiment aboard the European Space Agency's European Remote Sensing 2 satellite. Nitrogen oxide emissions from fossil fuel combustion are most closely linked to major population centers and show up in the satellite's ozone-monitoring measurements of nitrogen dioxide, part of the nitrogen oxides family.

Stricherz, Vince↗