Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “network design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Design and development of a structural mode control system

A program was conducted to compile and document some of the existing information about the conceptual design, development, and tests of the B-1 structural mode control system (SMCS) and its impact on ride quality. This report covers the following topics: (1) Rationale of selection of SMCS to meet ride quality criteria versus basic aircraft stiffening. (2) Key considerations in designing an SMCS, including vane geometry, rate and deflection requirements, power required, compensation network design, and fail-safe requirements. (3) Summary of key results of SMCS vane wind tunnel tests. (4) SMCS performance. (5) SMCS design details, including materials, bearings, and actuators. (6) Results of qualification testing of SMCS on the "Iron Bird" flight control simulator, and lab qualification testing of the actuators. (7) Impact of SMCS vanes on engine inlet characteristics from wind tunnel tests.

Source record↗
NASA NTRS1977

Survey: Federal Aviation Administration National Communication Center

The National Communication (NATCOM) Center (commonly known as the FAA Weather Message Switching Center), is a Federal Aviation Administration (FAA) facility with responsibility for providing communication switching services to the National Weather Service (NWS), the FAA, commercial and private flight organizations under the auspices of the FAA, and DoD. Data handled by NATCOM include weather data, flight plans, and Notices to Airmen (NOTAMS) on both national and international networks. The communications and data management functions are handled through four computer-controlled communication networks designated as WMSC, AFTN, A-BDIS, and NASNET. The functions of these networks are discussed with emphasis on those networks that support the different elements of the NWS. The primary network of concern to NASA, the WMSC (Weather Message Switching Center) network, performs approximately 60 percent of its work for the NWS, 20 percent for the State Department, and 20 percent for the FAA. This document discusses the current and future systems capabilities and workload of NATCOM in terms of new roles.

Source record↗
DOE OSTI2025

Blending Pipeline Analysis Tool for Hydrogen (BlendPATH) Documentation and User Manual

The Blending Pipeline Analysis Tool for Hydrogen (BlendPATH) is a flexible, open-source Python tool designed to provide users with case-by-case analysis capabilities to identify the necessary modifications to repurpose existing natural gas transmission pipeline networks to transport hydrogen as a blend of a user-specified volume fraction of hydrogen or as a pure stream and to estimate the associated capital and operating expenditures resulting from those modifications. This tool is intended to be applied during the initial screening stage of a prospective project when pipeline developers compile transmission pipeline technical documentation and history but prior to performing detailed pipeline inspections. Performing analysis with BlendPATH during this initial screening stage can provide the user with an understanding of promising opportunities and probable economic outcomes of repurposing their pipeline network for hydrogen before proceeding with detailed pipeline materials testing and pipeline inspections. BlendPATH consists of multiple modules to simulate, assess, and modify existing natural gas transmission pipeline network designs to be compatible with hydrogen as a blend or pure stream. The tool employs an open-source gas network hydraulic model to simulate existing, user-specified transmission pipeline networks, and it applies ASME B31.12 to assess the pipe segments within these networks for compatibility with hydrogen and to modify the networks to achieve compatibility where the existing infrastructure is inadequate. Users can specify ASME B31.12 design options for pipeline assessment and can select from multiple methods for pipeline modification. This report details the functionalities of BlendPATH Version 2.0.2 and demonstrates an example of applying BlendPATH to a case study. Potential and intended users of this framework include natural gas pipeline developers and operators and researchers at both public and private institutions. BlendPATH is publicly available at https://github.com/NREL/BlendPATH.

08 HYDROGEN↗
NASA NTRS1994

Fiber-Optic Terahertz Data-Communication Networks

Network protocols implemented in optical domain. Fiber-optic data-communication networks utilize fully available bandwidth of single-mode optical fibers. Two key features of method: use of subpicosecond laser pulses as carrier signals and spectral phase modulation of pulses for optical implementation of code-division multiple access as multiplexing network protocol. Local-area network designed according to concept offers full crossbar functionality, security of data in transit through network, and capacity about 100 times that of typical fiber-optic local-area network in current use.

Chua, Peter L.↗
NASA NTRS2002

Prediction of Aerodynamic Coefficient using Genetic Algorithm Optimized Neural Network for Sparse Data

Wind tunnels use scale models to characterize aerodynamic coefficients, Wind tunnel testing can be slow and costly due to high personnel overhead and intensive power utilization. Although manual curve fitting can be done, it is highly efficient to use a neural network to define the complex relationship between variables. Numerical simulation of complex vehicles on the wide range of conditions required for flight simulation requires static and dynamic data. Static data at low Mach numbers and angles of attack may be obtained with simpler Euler codes. Static data of stalled vehicles where zones of flow separation are usually present at higher angles of attack require Navier-Stokes simulations which are costly due to the large processing time required to attain convergence. Preliminary dynamic data may be obtained with simpler methods based on correlations and vortex methods; however, accurate prediction of the dynamic coefficients requires complex and costly numerical simulations. A reliable and fast method of predicting complex aerodynamic coefficients for flight simulation I'S presented using a neural network. The training data for the neural network are derived from numerical simulations and wind-tunnel experiments. The aerodynamic coefficients are modeled as functions of the flow characteristics and the control surfaces of the vehicle. The basic coefficients of lift, drag and pitching moment are expressed as functions of angles of attack and Mach number. The modeled and training aerodynamic coefficients show good agreement. This method shows excellent potential for rapid development of aerodynamic models for flight simulation. Genetic Algorithms (GA) are used to optimize a previously built Artificial Neural Network (ANN) that reliably predicts aerodynamic coefficients. Results indicate that the GA provided an efficient method of optimizing the ANN model to predict aerodynamic coefficients. The reliability of the ANN using the GA includes prediction of aerodynamic coefficients to an accuracy of 110% . In our problem, we would like to get an optimized neural network architecture and minimum data set. This has been accomplished within 500 training cycles of a neural network. After removing training pairs (outliers), the GA has produced much better results. The neural network constructed is a feed forward neural network with a back propagation learning mechanism. The main goal has been to free the network design process from constraints of human biases, and to discover better forms of neural network architectures. The automation of the network architecture search by genetic algorithms seems to have been the best way to achieve this goal.

Rajkumar, T.↗
NASA NTRS1990

Neural Network Development Tool (NETS)

Artificial neural networks formed from hundreds or thousands of simulated neurons, connected in manner similar to that in human brain. Such network models learning behavior. Using NETS involves translating problem to be solved into input/output pairs, designing network configuration, and training network. Written in C.

Baffes, Paul T.↗
NASA NTRS1977

Design of experiment for earth rotation and baseline parameter determination from very long baseline interferometry

The possibility of recovering earth rotation and network geometry (baseline) parameters are emphasized. The numerical simulated experiments performed are set up in an environment where station coordinates vary with respect to inertial space according to a simulated earth rotation model similar to the actual but unknown rotation of the earth. The basic technique of VLBI and its mathematical model are presented. The parametrization of earth rotation chosen is described and the resulting model is linearized. A simple analysis of the geometry of the observations leads to some useful hints on achieving maximum sensitivity of the observations with respect to the parameters considered. The basic philosophy for the simulation of data and their analysis through standard least squares adjustment techniques is presented. A number of characteristic network designs based on present and candidate station locations are chosen. The results of the simulations for each design are presented together with a summary of the conclusions.

Dermanis, A.↗
NASA NTRS2013

ION Configuration Editor

The configuration of ION (Inter - planetary Overlay Network) network nodes is a manual task that is complex, time-consuming, and error-prone. This program seeks to accelerate this job and produce reliable configurations. The ION Configuration Editor is a model-based smart editor based on Eclipse Modeling Framework technology. An ION network designer uses this Eclipse-based GUI to construct a data model of the complete target network and then generate configurations. The data model is captured in an XML file. Intrinsic editor features aid in achieving model correctness, such as field fill-in, type-checking, lists of valid values, and suitable default values. Additionally, an explicit "validation" feature executes custom rules to catch more subtle model errors. A "survey" feature provides a set of reports providing an overview of the entire network, enabling a quick assessment of the model s completeness and correctness. The "configuration" feature produces the main final result, a complete set of ION configuration files (eight distinct file types) for each ION node in the network.

Borgen, Richard L.↗
DOE OSTI2021

Service-Based, Segmented, 5G Network-Based Architecture for Securing Distributed Energy Resources: Preprint

As the number of connected devices in the energy grid increase exponentially, so too are the cybersecurity risks. With the development of modern communications standards such as 5G and beyond the extent to which devices will continue to connect will continue to increase exponentially along with the inherent risks. However, 5G also includes features to help address cybersecurity concerns and therefore helping to mitigate many of these risks. This paper proposes a new service-based network architecture implementing network-slicing capabilities for connected systems and devices to improve performance, availability, security, and reliability of the grid devices and services. This paper considers the quality of service requirements and criticality of services needed for securely monitoring, operating, and securing Distributed Energy Resource (DER) devices. From developed use cases, network slicing is implemented based on these requirements and resource allocations. This work then highlights examples of how slicing can help prevent standard existing attack methods such as a denial-of-service or similar attack which limits resource availability and network bandwidth to the service and thus limiting its ability to affect other services by misbehaving. The designed network architecture use case will be further tested on a local virtualized testbed to verify secure operation and availability of services. Using hardware-in-the-loop devices and systems on this local testbed, this fully segmented, secure network may be realized and evaluated. Finally, this paper presents the results of this testing.

5G↗
NASA NTRS1990

Program Aids Simulation Of Neural Networks

Computer program NETS - Tool for Development and Evaluation of Neural Networks - provides simulation of neural-network algorithms plus software environment for development of such algorithms. Enables user to customize patterns of connections between layers of network, and provides features for saving weight values of network, providing for more precise control over learning process. Consists of translating problem into format using input/output pairs, designing network configuration for problem, and finally training network with input/output pairs until acceptable error reached. Written in C.

Baffes, Paul T.↗
NASA NTRS1991

High-speed, cross-continental networks - A necessity

The networking requirements that the Earth Observing System (EOS) program has levied on NASA and the national and international operational networking communities is addressed. The objectives of the EOS program are listed and include the development and operation of an observing system to acquire essential, global earth science data on a long-term, sustained basis and in a manner which maximizes the scientific utility of the data and simplifies data analysis. Network design issues are also discussed, including protocol selection, the Transport Control Protocol/Internet Protocol suite, the Open Systems Interconnect network suite, and the internet evolution. Open and closed network issues are also discussed. A number of networks now in place are assessed including NASNet, and ESNet. These offer possible options and/or solutions to be considered by the NASA Headquarters EOS Data and Information Systems Program.

Wong, C. M.↗
NASA NTRS1995

Automated Propulsion Data Screening demonstration system

A fully-instrumented firing of a propulsion system typically generates a very large quantity of data. In the case of the Space Shuttle Main Engine (SSME), data analysis from ground tests and flights is currently a labor-intensive process. Human experts spend a great deal of time examining the large volume of sensor data generated by each engine firing. These experts look for any anomalies in the data which might indicate engine conditions warranting further investigation. The contract effort was to develop a 'first-cut' screening system for application to SSME engine firings that would identify the relatively small volume of data which is unusual or anomalous in some way. With such a system, limited and expensive human resources could focus on this small volume of unusual data for thorough analysis. The overall project objective was to develop a fully operational Automated Propulsion Data Screening (APDS) system with the capability of detecting significant trends and anomalies in transient and steady-state data. However, the effort limited screening of transient data to ground test data for throttle-down cases typical of the 3-g acceleration, and for engine throttling required to reach the maximum dynamic pressure limits imposed on the Space Shuttle. This APDS is based on neural networks designed to detect anomalies in propulsion system data that are not part of the data used for neural network training. The delivered system allows engineers to build their own screening sets for application to completed or planned firings of the SSME. ERC developers also built some generic screening sets that NASA engineers could apply immediately to their data analysis efforts.

Hoyt, W. Andes↗
NASA NTRS2004

Insights into Tropospheric Ozone from the INTEX Ozonesonde Network Study (IONS)

Ozone profile data from soundings integrate models, aircraft and other ground-based measurements for better interpretation of atmospheric chemistry and dynamics. A well-designed network of ozonesonde stations, with consistent sampling, can answer questions not possible with short campaigns or current satellite technology. The SHADOZ (Southern Hemisphere Additional Ozonesondes) project, for example, has led to these findings about tropical ozone: definition of the zonal tropospheric wave-one pattern in equatorial ozone, characterization of the "Atlantic ozone paradox" and establishment of a link between tropical Atlantic and Indian Ocean pollution. Building on the SHADOZ concept, a short-term ozone network was formed in July-August 2004 to coordinate ozonesonde launches during the ICARTT/INTEX/NEAQS (International Consortium on Atmospheric Research on Transport and Transformation)/Intercontinental Transport Experiment/New England Air Quality Study. In IONS (INTEX Ozonesonde Network Study), more than 250 soundings, with daily frequency at half the sites, were launched from eleven North American stations and an oceanographic ship in the Gulf of Maine. Although the goal was to examine pollution influences under stable high-pressure systems and transport associated with "warm conveyor belt" flows, the INTEX study region was dominated by a series of weak frontal system that mixed aged pollution with stratospheric ozone in the middle troposphere. Deconvoluting ozone sources provides new insights into ozone in the transition between mid-latitude and polar air.

Thompson, Anne M.↗
DOE OSTI2021

Resilient NdFeB magnet recycling under the impacts of COVID-19 pandemic: Stochastic programming and Benders decomposition

Neodymium-iron-boron (NdFeB) magnets are the most powerful magnets per unit volume sold in the commercial market. Despite the increasing demand for clean energy applications such as electric vehicles and wind turbines, disruptive events including the COVID-19 pandemic have caused significant uncertainties in the supply and demand for NdFeB magnets. Therefore, this study aims to alleviate the risk of supply shortage for NdFeB magnets and the containing critical materials, rare-earth elements (REEs), through the development of a resilient reverse supply chain and logistics network design. We develop scenarios to model the unique impact of the COVID-19 pandemic on the proposed business, incorporating both disruption intensity and recovery rate. We formulate a chance-constrained two-stage stochastic programming model to maximize the profit while guaranteeing the network resiliency against disruption risks. To solve the problem in large-scale instances, we develop an efficient Benders decomposition algorithm that reduces the computational time by 98.5% on average compared to the default CPLEX algorithm. When applied to the United States, the model suggests the optimal facility locations, processing capacities, inventory levels, and material flows for NdFeB magnet recyclers that could meet 99.7% of the demand. To the best of our knowledge, this study is the first to incorporate the impacts of the COVID-19 pandemic to design a resilient NdFeB magnet recycling supply chain and logistics network, leveraging risk-averse stochastic programming.

42 ENGINEERING↗
NASA NTRS1978

Design and fabrication of microstrip antenna arrays

A microstrip array project was conducted to demonstrate the feasibility of designing and fabricating simple, low cost, low sidelobe phased arrays with circular disk microstrip radiating elements. Design data were presented for microstrip elements and arrays including the effects of the protective covers, the mutual interaction between elements, and stripline feed network design. Low cost multilayer laminate fabrication techniques were also investigated. Utilizing this design data two C-band low sidelobe arrays were fabricated and tested: an eight-element linear and a sixty-four element planar array. These arrays incorporated stripline Butler matrix feed networks to produce a low sidelobe broadside beam.

Source record↗
NASA NTRS2011

Toward a Communications Satellite Network for Humanitarian Relief

Since the introduction in 2008 of the "Ring Road" concept, proposing a communications satellite network designed to support disadvantaged populations, there have been a number of advances in the underlying technologies, CubeSat picosatellites and Delay-Tolerant Networking. We review the original Ring Road proposal, discuss relevant recent technological progress, and offer some tentative notes on projected cost and performance.

CubeSat↗
NASA NTRS1983

Scanning beam antenna conceptual design for 20/30 GHz satellite systems

The configuration described is one of four antenna system configurations developed using a variety of monolithic microwave integrated circuit module arrangements and optical systems. A parametric analysis is expected to produce a data base for the selection of design points for a variety of applications. Soon to be accomplished is the design concept of the active (lens) array, which will take into consideration such factors as, coupling effects, the space-fed power divider network design, input bias and control layout, investigation of thermal distribution, and analysis of module failure (graceful degradation).

Smetana, J.↗
NASA NTRS1994

Telecommunications issues of intelligent database management for ground processing systems in the EOS era

Future NASA earth science missions, including the Earth Observing System (EOS), will be generating vast amounts of data that must be processed and stored at various locations around the world. Here we present a stepwise-refinement of the intelligent database management (IDM) of the distributed active archive center (DAAC - one of seven regionally-located EOSDIS archive sites) architecture, to showcase the telecommunications issues involved. We develop this architecture into a general overall design. We show that the current evolution of protocols is sufficient to support IDM at Gbps rates over large distances. We also show that network design can accommodate a flexible data ingestion storage pipeline and a user extraction and visualization engine, without interference between the two.

Touch, Joseph D.↗